EVOLUTION-MANAGER

Edit File: RegionNetworkEndpointGroups.php

<?php
/*
 * Copyright 2014 Google Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License"); you may not
 * use this file except in compliance with the License. You may obtain a copy of
 * the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 * License for the specific language governing permissions and limitations under
 * the License.
 */

namespace Google\Service\Compute\Resource;

use Google\Service\Compute\NetworkEndpointGroup;
use Google\Service\Compute\NetworkEndpointGroupList;
use Google\Service\Compute\Operation;

/**
 * The "regionNetworkEndpointGroups" collection of methods.
 * Typical usage is:
 *  <code>
 *   $computeService = new Google\Service\Compute(...);
 *   $regionNetworkEndpointGroups = $computeService->regionNetworkEndpointGroups;
 *  </code>
 */
class RegionNetworkEndpointGroups extends \Google\Service\Resource
{
  /**
   * Deletes the specified network endpoint group. Note that the NEG cannot be
   * deleted if it is configured as a backend of a backend service.
   * (regionNetworkEndpointGroups.delete)
   *
   * @param string $project Project ID for this request.
   * @param string $region The name of the region where the network endpoint group
   * is located. It should comply with RFC1035.
   * @param string $networkEndpointGroup The name of the network endpoint group to
   * delete. It should comply with RFC1035.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   */
  public function delete($project, $region, $networkEndpointGroup, $optParams = [])
  {
    $params = ['project' => $project, 'region' => $region, 'networkEndpointGroup' => $networkEndpointGroup];
    $params = array_merge($params, $optParams);
    return $this->call('delete', [$params], Operation::class);
  }
  /**
   * Returns the specified network endpoint group.
   * (regionNetworkEndpointGroups.get)
   *
   * @param string $project Project ID for this request.
   * @param string $region The name of the region where the network endpoint group
   * is located. It should comply with RFC1035.
   * @param string $networkEndpointGroup The name of the network endpoint group.
   * It should comply with RFC1035.
   * @param array $optParams Optional parameters.
   * @return NetworkEndpointGroup
   */
  public function get($project, $region, $networkEndpointGroup, $optParams = [])
  {
    $params = ['project' => $project, 'region' => $region, 'networkEndpointGroup' => $networkEndpointGroup];
    $params = array_merge($params, $optParams);
    return $this->call('get', [$params], NetworkEndpointGroup::class);
  }
  /**
   * Creates a network endpoint group in the specified project using the
   * parameters that are included in the request.
   * (regionNetworkEndpointGroups.insert)
   *
   * @param string $project Project ID for this request.
   * @param string $region The name of the region where you want to create the
   * network endpoint group. It should comply with RFC1035.
   * @param NetworkEndpointGroup $postBody
   * @param array $optParams Optional parameters.
   *
   * @opt_param string requestId An optional request ID to identify requests.
   * Specify a unique request ID so that if you must retry your request, the
   * server will know to ignore the request if it has already been completed. For
   * example, consider a situation where you make an initial request and the
   * request times out. If you make the request again with the same request ID,
   * the server can check if original operation with the same request ID was
   * received, and if so, will ignore the second request. This prevents clients
   * from accidentally creating duplicate commitments. The request ID must be a
   * valid UUID with the exception that zero UUID is not supported (
   * 00000000-0000-0000-0000-000000000000).
   * @return Operation
   */
  public function insert($project, $region, NetworkEndpointGroup $postBody, $optParams = [])
  {
    $params = ['project' => $project, 'region' => $region, 'postBody' => $postBody];
    $params = array_merge($params, $optParams);
    return $this->call('insert', [$params], Operation::class);
  }
  /**
   * Retrieves the list of regional network endpoint groups available to the
   * specified project in the given region.
   * (regionNetworkEndpointGroups.listRegionNetworkEndpointGroups)
   *
   * @param string $project Project ID for this request.
   * @param string $region The name of the region where the network endpoint group
   * is located. It should comply with RFC1035.
   * @param array $optParams Optional parameters.
   *
   * @opt_param string filter A filter expression that filters resources listed in
   * the response. Most Compute resources support two types of filter expressions:
   * expressions that support regular expressions and expressions that follow API
   * improvement proposal AIP-160. If you want to use AIP-160, your expression
   * must specify the field name, an operator, and the value that you want to use
   * for filtering. The value must be a string, a number, or a boolean. The
   * operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example,
   * if you are filtering Compute Engine instances, you can exclude instances
   * named `example-instance` by specifying `name != example-instance`. The `:`
   * operator can be used with string fields to match substrings. For non-string
   * fields it is equivalent to the `=` operator. The `:*` comparison can be used
   * to test whether a key has been defined. For example, to find all objects with
   * `owner` label use: ``` labels.owner:* ``` You can also filter nested fields.
   * For example, you could specify `scheduling.automaticRestart = false` to
   * include instances only if they are not scheduled for automatic restarts. You
   * can use filtering on nested fields to filter based on resource labels. To
   * filter on multiple expressions, provide each separate expression within
   * parentheses. For example: ``` (scheduling.automaticRestart = true)
   * (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND`
   * expression. However, you can include `AND` and `OR` expressions explicitly.
   * For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel
   * Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a
   * regular expression, use the `eq` (equal) or `ne` (not equal) operator against
   * a single un-parenthesized expression with or without quotes or against
   * multiple parenthesized expressions. Examples: `fieldname eq unquoted literal`
   * `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"`
   * `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is
   * interpreted as a regular expression using Google RE2 library syntax. The
   * literal value must match the entire field. For example, to filter for
   * instances that do not end with name "instance", you would use `name ne
   * .*instance`.
   * @opt_param string maxResults The maximum number of results per page that
   * should be returned. If the number of available results is larger than
   * `maxResults`, Compute Engine returns a `nextPageToken` that can be used to
   * get the next page of results in subsequent list requests. Acceptable values
   * are `0` to `500`, inclusive. (Default: `500`)
   * @opt_param string orderBy Sorts list results by a certain order. By default,
   * results are returned in alphanumerical order based on the resource name. You
   * can also sort results in descending order based on the creation timestamp
   * using `orderBy="creationTimestamp desc"`. This sorts results based on the
   * `creationTimestamp` field in reverse chronological order (newest result
   * first). Use this to sort resources like operations so that the newest
   * operation is returned first. Currently, only sorting by `name` or
   * `creationTimestamp desc` is supported.
   * @opt_param string pageToken Specifies a page token to use. Set `pageToken` to
   * the `nextPageToken` returned by a previous list request to get the next page
   * of results.
   * @opt_param bool returnPartialSuccess Opt-in for partial success behavior
   * which provides partial results in case of failure. The default value is
   * false.
   * @return NetworkEndpointGroupList
   */
  public function listRegionNetworkEndpointGroups($project, $region, $optParams = [])
  {
    $params = ['project' => $project, 'region' => $region];
    $params = array_merge($params, $optParams);
    return $this->call('list', [$params], NetworkEndpointGroupList::class);
  }
}

// Adding a class alias for backwards compatibility with the previous class name.
class_alias(RegionNetworkEndpointGroups::class, 'Google_Service_Compute_Resource_RegionNetworkEndpointGroups');