EVOLUTION-MANAGER

Edit File: irda_device.h

/********************************************************************* * * Filename: irda_device.h * Version: 0.9 * Description: Contains various declarations used by the drivers * Status: Experimental. * Author: Dag Brattli <dagb@cs.uit.no> * Created at: Tue Apr 14 12:41:42 1998 * Modified at: Mon Mar 20 09:08:57 2000 * Modified by: Dag Brattli <dagb@cs.uit.no> * * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved. * Copyright (c) 1998 Thomas Davis, <ratbert@radiks.net>, * Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see <http://www.gnu.org/licenses/>. * ********************************************************************/ /* * This header contains all the IrDA definitions a driver really * needs, and therefore the driver should not need to include * any other IrDA headers - Jean II */ #ifndef IRDA_DEVICE_H #define IRDA_DEVICE_H #include <linux/tty.h> #include <linux/netdevice.h> #include <linux/spinlock.h> #include <linux/skbuff.h> /* struct sk_buff */ #include <linux/irda.h> #include <linux/types.h> #include <net/pkt_sched.h> #include <net/irda/irda.h> #include <net/irda/qos.h> /* struct qos_info */ #include <net/irda/irqueue.h> /* irda_queue_t */ /* A few forward declarations (to make compiler happy) */ struct irlap_cb; /* Some non-standard interface flags (should not conflict with any in if.h) */ #define IFF_SIR 0x0001 /* Supports SIR speeds */ #define IFF_MIR 0x0002 /* Supports MIR speeds */ #define IFF_FIR 0x0004 /* Supports FIR speeds */ #define IFF_VFIR 0x0008 /* Supports VFIR speeds */ #define IFF_PIO 0x0010 /* Supports PIO transfer of data */ #define IFF_DMA 0x0020 /* Supports DMA transfer of data */ #define IFF_SHM 0x0040 /* Supports shared memory data transfers */ #define IFF_DONGLE 0x0080 /* Interface has a dongle attached */ #define IFF_AIR 0x0100 /* Supports Advanced IR (AIR) standards */ #define IO_XMIT 0x01 #define IO_RECV 0x02 typedef enum { IRDA_IRLAP, /* IrDA mode, and deliver to IrLAP */ IRDA_RAW, /* IrDA mode */ SHARP_ASK, TV_REMOTE, /* Also known as Consumer Electronics IR */ } INFRARED_MODE; typedef enum { IRDA_TASK_INIT, /* All tasks are initialized with this state */ IRDA_TASK_DONE, /* Signals that the task is finished */ IRDA_TASK_WAIT, IRDA_TASK_WAIT1, IRDA_TASK_WAIT2, IRDA_TASK_WAIT3, IRDA_TASK_CHILD_INIT, /* Initializing child task */ IRDA_TASK_CHILD_WAIT, /* Waiting for child task to finish */ IRDA_TASK_CHILD_DONE /* Child task is finished */ } IRDA_TASK_STATE; struct irda_task; typedef int (*IRDA_TASK_CALLBACK) (struct irda_task *task); struct irda_task { irda_queue_t q; magic_t magic; IRDA_TASK_STATE state; IRDA_TASK_CALLBACK function; IRDA_TASK_CALLBACK finished; struct irda_task *parent; struct timer_list timer; void *instance; /* Instance being called */ void *param; /* Parameter to be used by instance */ }; /* Dongle info */ struct dongle_reg; typedef struct { struct dongle_reg *issue; /* Registration info */ struct net_device *dev; /* Device we are attached to */ struct irda_task *speed_task; /* Task handling speed change */ struct irda_task *reset_task; /* Task handling reset */ __u32 speed; /* Current speed */ /* Callbacks to the IrDA device driver */ int (*set_mode)(struct net_device *, int mode); int (*read)(struct net_device *dev, __u8 *buf, int len); int (*write)(struct net_device *dev, __u8 *buf, int len); int (*set_dtr_rts)(struct net_device *dev, int dtr, int rts); } dongle_t; /* Dongle registration info */ struct dongle_reg { irda_queue_t q; /* Must be first */ IRDA_DONGLE type; void (*open)(dongle_t *dongle, struct qos_info *qos); void (*close)(dongle_t *dongle); int (*reset)(struct irda_task *task); int (*change_speed)(struct irda_task *task); struct module *owner; }; /* * Per-packet information we need to hide inside sk_buff * (must not exceed 48 bytes, check with struct sk_buff) * The default_qdisc_pad field is a temporary hack. */ struct irda_skb_cb { unsigned int default_qdisc_pad; magic_t magic; /* Be sure that we can trust the information */ __u32 next_speed; /* The Speed to be set *after* this frame */ __u16 mtt; /* Minimum turn around time */ __u16 xbofs; /* Number of xbofs required, used by SIR mode */ __u16 next_xbofs; /* Number of xbofs required *after* this frame */ void *context; /* May be used by drivers */ void (*destructor)(struct sk_buff *skb); /* Used for flow control */ __u16 xbofs_delay; /* Number of xbofs used for generating the mtt */ __u8 line; /* Used by IrCOMM in IrLPT mode */ }; /* Chip specific info */ typedef struct { int cfg_base; /* Config register IO base */ int sir_base; /* SIR IO base */ int fir_base; /* FIR IO base */ int mem_base; /* Shared memory base */ int sir_ext; /* Length of SIR iobase */ int fir_ext; /* Length of FIR iobase */ int irq, irq2; /* Interrupts used */ int dma, dma2; /* DMA channel(s) used */ int fifo_size; /* FIFO size */ int irqflags; /* interrupt flags (ie, IRQF_SHARED|IRQF_DISABLED) */ int direction; /* Link direction, used by some FIR drivers */ int enabled; /* Powered on? */ int suspended; /* Suspended by APM */ __u32 speed; /* Currently used speed */ __u32 new_speed; /* Speed we must change to when Tx is finished */ int dongle_id; /* Dongle or transceiver currently used */ } chipio_t; /* IO buffer specific info (inspired by struct sk_buff) */ typedef struct { int state; /* Receiving state (transmit state not used) */ int in_frame; /* True if receiving frame */ __u8 *head; /* start of buffer */ __u8 *data; /* start of data in buffer */ int len; /* current length of data */ int truesize; /* total allocated size of buffer */ __u16 fcs; struct sk_buff *skb; /* ZeroCopy Rx in async_unwrap_char() */ } iobuff_t; /* Maximum SIR frame (skb) that we expect to receive *unwrapped*. * Max LAP MTU (I field) is 2048 bytes max (IrLAP 1.1, chapt 6.6.5, p40). * Max LAP header is 2 bytes (for now). * Max CRC is 2 bytes at SIR, 4 bytes at FIR. * Need 1 byte for skb_reserve() to align IP header for IrLAN. * Add a few extra bytes just to be safe (buffer is power of two anyway) * Jean II */ #define IRDA_SKB_MAX_MTU 2064 /* Maximum SIR frame that we expect to send, wrapped (i.e. with XBOFS * and escaped characters on top of above). */ #define IRDA_SIR_MAX_FRAME 4269 /* The SIR unwrapper async_unwrap_char() will use a Rx-copy-break mechanism * when using the optional ZeroCopy Rx, where only small frames are memcpy * to a smaller skb to save memory. This is the threshold under which copy * will happen (and over which it won't happen). * Some FIR drivers may use this #define as well... * This is the same value as various Ethernet drivers. - Jean II */ #define IRDA_RX_COPY_THRESHOLD 256 /* Function prototypes */ int irda_device_init(void); void irda_device_cleanup(void); /* IrLAP entry points used by the drivers. * We declare them here to avoid the driver pulling a whole bunch stack * headers they don't really need - Jean II */ struct irlap_cb *irlap_open(struct net_device *dev, struct qos_info *qos, const char *hw_name); void irlap_close(struct irlap_cb *self); /* Interface to be uses by IrLAP */ void irda_device_set_media_busy(struct net_device *dev, int status); int irda_device_is_media_busy(struct net_device *dev); int irda_device_is_receiving(struct net_device *dev); /* Interface for internal use */ static inline int irda_device_txqueue_empty(const struct net_device *dev) { return qdisc_all_tx_empty(dev); } int irda_device_set_raw_mode(struct net_device* self, int status); struct net_device *alloc_irdadev(int sizeof_priv); void irda_setup_dma(int channel, dma_addr_t buffer, int count, int mode); /* * Function irda_get_mtt (skb) * * Utility function for getting the minimum turnaround time out of * the skb, where it has been hidden in the cb field. */ static inline __u16 irda_get_mtt(const struct sk_buff *skb) { const struct irda_skb_cb *cb = (const struct irda_skb_cb *) skb->cb; return (cb->magic == LAP_MAGIC) ? cb->mtt : 10000; } /* * Function irda_get_next_speed (skb) * * Extract the speed that should be set *after* this frame from the skb * * Note : return -1 for user space frames */ static inline __u32 irda_get_next_speed(const struct sk_buff *skb) { const struct irda_skb_cb *cb = (const struct irda_skb_cb *) skb->cb; return (cb->magic == LAP_MAGIC) ? cb->next_speed : -1; } /* * Function irda_get_next_xbofs (skb) * * Extract the xbofs that should be set for this frame from the skb * * Note : default to 10 for user space frames */ static inline __u16 irda_get_xbofs(const struct sk_buff *skb) { const struct irda_skb_cb *cb = (const struct irda_skb_cb *) skb->cb; return (cb->magic == LAP_MAGIC) ? cb->xbofs : 10; } /* * Function irda_get_next_xbofs (skb) * * Extract the xbofs that should be set *after* this frame from the skb * * Note : return -1 for user space frames */ static inline __u16 irda_get_next_xbofs(const struct sk_buff *skb) { const struct irda_skb_cb *cb = (const struct irda_skb_cb *) skb->cb; return (cb->magic == LAP_MAGIC) ? cb->next_xbofs : -1; } #endif /* IRDA_DEVICE_H */