EVOLUTION-MANAGER

Edit File: lirc.h

/* * lirc.h - linux infrared remote control header file * last modified 2010/07/13 by Jarod Wilson */ #ifndef _LINUX_LIRC_H #define _LINUX_LIRC_H #include <linux/types.h> #include <linux/ioctl.h> #define PULSE_BIT 0x01000000 #define PULSE_MASK 0x00FFFFFF #define LIRC_MODE2_SPACE 0x00000000 #define LIRC_MODE2_PULSE 0x01000000 #define LIRC_MODE2_FREQUENCY 0x02000000 #define LIRC_MODE2_TIMEOUT 0x03000000 #define LIRC_VALUE_MASK 0x00FFFFFF #define LIRC_MODE2_MASK 0xFF000000 #define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) #define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) #define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) #define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) #define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK) #define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK) #define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE) #define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE) #define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY) #define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT) /* used heavily by lirc userspace */ #define lirc_t int /*** lirc compatible hardware features ***/ #define LIRC_MODE2SEND(x) (x) #define LIRC_SEND2MODE(x) (x) #define LIRC_MODE2REC(x) ((x) << 16) #define LIRC_REC2MODE(x) ((x) >> 16) #define LIRC_MODE_RAW 0x00000001 #define LIRC_MODE_PULSE 0x00000002 #define LIRC_MODE_MODE2 0x00000004 #define LIRC_MODE_LIRCCODE 0x00000010 #define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW) #define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE) #define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2) #define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE) #define LIRC_CAN_SEND_MASK 0x0000003f #define LIRC_CAN_SET_SEND_CARRIER 0x00000100 #define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200 #define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400 #define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW) #define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE) #define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2) #define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE) #define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK) #define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16) #define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16) #define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000 #define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000 #define LIRC_CAN_GET_REC_RESOLUTION 0x20000000 #define LIRC_CAN_SET_REC_TIMEOUT 0x10000000 #define LIRC_CAN_SET_REC_FILTER 0x08000000 #define LIRC_CAN_MEASURE_CARRIER 0x02000000 #define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000 #define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK) #define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK) #define LIRC_CAN_NOTIFY_DECODE 0x01000000 /*** IOCTL commands for lirc driver ***/ #define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32) #define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32) #define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32) #define LIRC_GET_SEND_CARRIER _IOR('i', 0x00000003, __u32) #define LIRC_GET_REC_CARRIER _IOR('i', 0x00000004, __u32) #define LIRC_GET_SEND_DUTY_CYCLE _IOR('i', 0x00000005, __u32) #define LIRC_GET_REC_DUTY_CYCLE _IOR('i', 0x00000006, __u32) #define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32) #define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32) #define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32) #define LIRC_GET_MIN_FILTER_PULSE _IOR('i', 0x0000000a, __u32) #define LIRC_GET_MAX_FILTER_PULSE _IOR('i', 0x0000000b, __u32) #define LIRC_GET_MIN_FILTER_SPACE _IOR('i', 0x0000000c, __u32) #define LIRC_GET_MAX_FILTER_SPACE _IOR('i', 0x0000000d, __u32) /* code length in bits, currently only for LIRC_MODE_LIRCCODE */ #define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32) #define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32) #define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32) /* Note: these can reset the according pulse_width */ #define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32) #define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32) #define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32) #define LIRC_SET_REC_DUTY_CYCLE _IOW('i', 0x00000016, __u32) #define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32) /* * when a timeout != 0 is set the driver will send a * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is * never sent, timeout is disabled by default */ #define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32) /* 1 enables, 0 disables timeout reports in MODE2 */ #define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32) /* * pulses shorter than this are filtered out by hardware (software * emulation in lirc_dev?) */ #define LIRC_SET_REC_FILTER_PULSE _IOW('i', 0x0000001a, __u32) /* * spaces shorter than this are filtered out by hardware (software * emulation in lirc_dev?) */ #define LIRC_SET_REC_FILTER_SPACE _IOW('i', 0x0000001b, __u32) /* * if filter cannot be set independently for pulse/space, this should * be used */ #define LIRC_SET_REC_FILTER _IOW('i', 0x0000001c, __u32) /* * if enabled from the next key press on the driver will send * LIRC_MODE2_FREQUENCY packets */ #define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32) /* * to set a range use * LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE with the * lower bound first and later * LIRC_SET_REC_DUTY_CYCLE/LIRC_SET_REC_CARRIER with the upper bound */ #define LIRC_SET_REC_DUTY_CYCLE_RANGE _IOW('i', 0x0000001e, __u32) #define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32) #define LIRC_NOTIFY_DECODE _IO('i', 0x00000020) #define LIRC_SETUP_START _IO('i', 0x00000021) #define LIRC_SETUP_END _IO('i', 0x00000022) #define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32) #endif