EVOLUTION-MANAGER

Edit File: pgtable-2level.h

#ifndef _ASM_X86_PGTABLE_2LEVEL_H #define _ASM_X86_PGTABLE_2LEVEL_H #define pte_ERROR(e) \ pr_err("%s:%d: bad pte %08lx\n", __FILE__, __LINE__, (e).pte_low) #define pgd_ERROR(e) \ pr_err("%s:%d: bad pgd %08lx\n", __FILE__, __LINE__, pgd_val(e)) /* * Certain architectures need to do special things when PTEs * within a page table are directly modified. Thus, the following * hook is made available. */ static inline void native_set_pte(pte_t *ptep , pte_t pte) { mm_track_pte(ptep); *ptep = pte; } static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd) { mm_track_pmd(pmdp); *pmdp = pmd; } static inline void native_set_pud(pud_t *pudp, pud_t pud) { } static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte) { native_set_pte(ptep, pte); } static inline void native_pmd_clear(pmd_t *pmdp) { native_set_pmd(pmdp, __pmd(0)); } static inline void native_pud_clear(pud_t *pudp) { } static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *xp) { mm_track_pte(xp); *xp = native_make_pte(0); } #ifdef CONFIG_SMP static inline pte_t native_ptep_get_and_clear(pte_t *xp) { mm_track_pte(xp); return __pte(xchg(&xp->pte_low, 0)); } #else #define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp) #endif #ifdef CONFIG_SMP static inline pmd_t native_pmdp_get_and_clear(pmd_t *xp) { mm_track_pmd(xp); return __pmd(xchg((pmdval_t *)xp, 0)); } #else #define native_pmdp_get_and_clear(xp) native_local_pmdp_get_and_clear(xp) #endif #ifdef CONFIG_SMP static inline pud_t native_pudp_get_and_clear(pud_t *xp) { return __pud(xchg((pudval_t *)xp, 0)); } #else #define native_pudp_get_and_clear(xp) native_local_pudp_get_and_clear(xp) #endif #ifdef CONFIG_MEM_SOFT_DIRTY /* * Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE, _PAGE_BIT_SOFT_DIRTY and * _PAGE_BIT_PROTNONE are taken, split up the 28 bits of offset * into this range. */ #define PTE_FILE_MAX_BITS 28 #define PTE_FILE_SHIFT1 (_PAGE_BIT_PRESENT + 1) #define PTE_FILE_SHIFT2 (_PAGE_BIT_FILE + 1) #define PTE_FILE_SHIFT3 (_PAGE_BIT_PROTNONE + 1) #define PTE_FILE_SHIFT4 (_PAGE_BIT_SOFT_DIRTY + 1) #define PTE_FILE_BITS1 (PTE_FILE_SHIFT2 - PTE_FILE_SHIFT1 - 1) #define PTE_FILE_BITS2 (PTE_FILE_SHIFT3 - PTE_FILE_SHIFT2 - 1) #define PTE_FILE_BITS3 (PTE_FILE_SHIFT4 - PTE_FILE_SHIFT3 - 1) #define pte_to_pgoff(pte) \ ((((pte).pte_low >> (PTE_FILE_SHIFT1)) \ & ((1U << PTE_FILE_BITS1) - 1))) \ + ((((pte).pte_low >> (PTE_FILE_SHIFT2)) \ & ((1U << PTE_FILE_BITS2) - 1)) \ << (PTE_FILE_BITS1)) \ + ((((pte).pte_low >> (PTE_FILE_SHIFT3)) \ & ((1U << PTE_FILE_BITS3) - 1)) \ << (PTE_FILE_BITS1 + PTE_FILE_BITS2)) \ + ((((pte).pte_low >> (PTE_FILE_SHIFT4))) \ << (PTE_FILE_BITS1 + PTE_FILE_BITS2 + PTE_FILE_BITS3)) #define pgoff_to_pte(off) \ ((pte_t) { .pte_low = \ ((((off)) & ((1U << PTE_FILE_BITS1) - 1)) << PTE_FILE_SHIFT1) \ + ((((off) >> PTE_FILE_BITS1) \ & ((1U << PTE_FILE_BITS2) - 1)) \ << PTE_FILE_SHIFT2) \ + ((((off) >> (PTE_FILE_BITS1 + PTE_FILE_BITS2)) \ & ((1U << PTE_FILE_BITS3) - 1)) \ << PTE_FILE_SHIFT3) \ + ((((off) >> \ (PTE_FILE_BITS1 + PTE_FILE_BITS2 + PTE_FILE_BITS3))) \ << PTE_FILE_SHIFT4) \ + _PAGE_FILE }) #else /* CONFIG_MEM_SOFT_DIRTY */ /* * Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE and _PAGE_BIT_PROTNONE are taken, * split up the 29 bits of offset into this range. */ #define PTE_FILE_MAX_BITS 29 #define PTE_FILE_SHIFT1 (_PAGE_BIT_PRESENT + 1) #if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE #define PTE_FILE_SHIFT2 (_PAGE_BIT_FILE + 1) #define PTE_FILE_SHIFT3 (_PAGE_BIT_PROTNONE + 1) #else #define PTE_FILE_SHIFT2 (_PAGE_BIT_PROTNONE + 1) #define PTE_FILE_SHIFT3 (_PAGE_BIT_FILE + 1) #endif #define PTE_FILE_BITS1 (PTE_FILE_SHIFT2 - PTE_FILE_SHIFT1 - 1) #define PTE_FILE_BITS2 (PTE_FILE_SHIFT3 - PTE_FILE_SHIFT2 - 1) #define pte_to_pgoff(pte) \ ((((pte).pte_low >> PTE_FILE_SHIFT1) \ & ((1U << PTE_FILE_BITS1) - 1)) \ + ((((pte).pte_low >> PTE_FILE_SHIFT2) \ & ((1U << PTE_FILE_BITS2) - 1)) << PTE_FILE_BITS1) \ + (((pte).pte_low >> PTE_FILE_SHIFT3) \ << (PTE_FILE_BITS1 + PTE_FILE_BITS2))) #define pgoff_to_pte(off) \ ((pte_t) { .pte_low = \ (((off) & ((1U << PTE_FILE_BITS1) - 1)) << PTE_FILE_SHIFT1) \ + ((((off) >> PTE_FILE_BITS1) & ((1U << PTE_FILE_BITS2) - 1)) \ << PTE_FILE_SHIFT2) \ + (((off) >> (PTE_FILE_BITS1 + PTE_FILE_BITS2)) \ << PTE_FILE_SHIFT3) \ + _PAGE_FILE }) #endif /* CONFIG_MEM_SOFT_DIRTY */ /* Encode and de-code a swap entry */ #if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE #define SWP_TYPE_BITS (_PAGE_BIT_FILE - _PAGE_BIT_PRESENT - 1) #define SWP_OFFSET_SHIFT (_PAGE_BIT_PROTNONE + 1) #else #define SWP_TYPE_BITS (_PAGE_BIT_PROTNONE - _PAGE_BIT_PRESENT - 1) #define SWP_OFFSET_SHIFT (_PAGE_BIT_FILE + 1) #endif #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS) #define __swp_type(x) (((x).val >> (_PAGE_BIT_PRESENT + 1)) \ & ((1U << SWP_TYPE_BITS) - 1)) #define __swp_offset(x) ((x).val >> SWP_OFFSET_SHIFT) #define __swp_entry(type, offset) ((swp_entry_t) { \ ((type) << (_PAGE_BIT_PRESENT + 1)) \ | ((offset) << SWP_OFFSET_SHIFT) }) #define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_low }) #define __swp_entry_to_pte(x) ((pte_t) { .pte = (x).val }) /* No inverted PFNs on 2 level page tables */ static inline u64 protnone_mask(u64 val) { return 0; } static inline u64 flip_protnone_guard(u64 oldval, u64 val, u64 mask) { return val; } static inline bool __pte_needs_invert(u64 val) { return false; } #endif /* _ASM_X86_PGTABLE_2LEVEL_H */