EVOLUTION-MANAGER

Edit File: mgrs.h

#ifndef MGRS_H #define MGRS_H /*************************************************************************** * $Id: mgrs.h 10645 2007-01-18 02:22:39Z warmerdam $ * * Project: MGRS Converter * Purpose: Geotrans declarations for MGRS translation (slightly adapted) * Author: Unknown (NIMA) * *************************************************************************** *************************************************************************** * RSC IDENTIFIER: MGRS * * ABSTRACT * * This component converts between geodetic coordinates (latitude and * longitude) and Military Grid Reference System (MGRS) coordinates. * * ERROR HANDLING * * This component checks parameters for valid values. If an invalid value * is found, the error code is combined with the current error code using * the bitwise or. This combining allows multiple error codes to be * returned. The possible error codes are: * * MGRS_NO_ERROR : No errors occurred in function * MGRS_LAT_ERROR : Latitude outside of valid range * (-90 to 90 degrees) * MGRS_LON_ERROR : Longitude outside of valid range * (-180 to 360 degrees) * MGRS_STR_ERROR : An MGRS string error: string too long, * too short, or badly formed * MGRS_PRECISION_ERROR : The precision must be between 0 and 5 * inclusive. * MGRS_A_ERROR : Semi-major axis less than or equal to zero * MGRS_INV_F_ERROR : Inverse flattening outside of valid range * (250 to 350) * MGRS_EASTING_ERROR : Easting outside of valid range * (100,000 to 900,000 meters for UTM) * (0 to 4,000,000 meters for UPS) * MGRS_NORTHING_ERROR : Northing outside of valid range * (0 to 10,000,000 meters for UTM) * (0 to 4,000,000 meters for UPS) * MGRS_ZONE_ERROR : Zone outside of valid range (1 to 60) * MGRS_HEMISPHERE_ERROR : Invalid hemisphere ('N' or 'S') * * REUSE NOTES * * MGRS is intended for reuse by any application that does conversions * between geodetic coordinates and MGRS coordinates. * * REFERENCES * * Further information on MGRS can be found in the Reuse Manual. * * MGRS originated from : U.S. Army Topographic Engineering Center * Geospatial Information Division * 7701 Telegraph Road * Alexandria, VA 22310-3864 * * LICENSES * * None apply to this component. * * RESTRICTIONS * * * ENVIRONMENT * * MGRS was tested and certified in the following environments: * * 1. Solaris 2.5 with GCC version 2.8.1 * 2. Windows 95 with MS Visual C++ version 6 * * MODIFICATIONS * * Date Description * ---- ----------- * 16-11-94 Original Code * 15-09-99 Reengineered upper layers * */ /***************************************************************************/ /* * DEFINES */ #define MGRS_NO_ERROR 0x0000 #define MGRS_LAT_ERROR 0x0001 #define MGRS_LON_ERROR 0x0002 #define MGRS_STRING_ERROR 0x0004 #define MGRS_PRECISION_ERROR 0x0008 #define MGRS_A_ERROR 0x0010 #define MGRS_INV_F_ERROR 0x0020 #define MGRS_EASTING_ERROR 0x0040 #define MGRS_NORTHING_ERROR 0x0080 #define MGRS_ZONE_ERROR 0x0100 #define MGRS_HEMISPHERE_ERROR 0x0200 /***************************************************************************/ /* * FUNCTION PROTOTYPES */ /* ensure proper linkage to c++ programs */ #ifdef __cplusplus extern "C" { #endif long Set_MGRS_Parameters(double a, double f, char *Ellipsoid_Code); /* * The function Set_MGRS_Parameters receives the ellipsoid parameters and sets * the corresponding state variables. If any errors occur, the error code(s) * are returned by the function, otherwise MGRS_NO_ERROR is returned. * * a : Semi-major axis of ellipsoid in meters (input) * f : Flattening of ellipsoid (input) * Ellipsoid_Code : 2-letter code for ellipsoid (input) */ void Get_MGRS_Parameters(double *a, double *f, char *Ellipsoid_Code); /* * The function Get_MGRS_Parameters returns the current ellipsoid * parameters. * * a : Semi-major axis of ellipsoid, in meters (output) * f : Flattening of ellipsoid (output) * Ellipsoid_Code : 2-letter code for ellipsoid (output) */ long Convert_Geodetic_To_MGRS (double Latitude, double Longitude, long Precision, char *MGRS); /* * The function Convert_Geodetic_To_MGRS converts geodetic (latitude and * longitude) coordinates to an MGRS coordinate string, according to the * current ellipsoid parameters. If any errors occur, the error code(s) * are returned by the function, otherwise MGRS_NO_ERROR is returned. * * Latitude : Latitude in radians (input) * Longitude : Longitude in radians (input) * Precision : Precision level of MGRS string (input) * MGRS : MGRS coordinate string (output) * */ long Convert_MGRS_To_Geodetic (char *MGRS, double *Latitude, double *Longitude); /* * This function converts an MGRS coordinate string to Geodetic (latitude * and longitude in radians) coordinates. If any errors occur, the error * code(s) are returned by the function, otherwise MGRS_NO_ERROR is returned. * * MGRS : MGRS coordinate string (input) * Latitude : Latitude in radians (output) * Longitude : Longitude in radians (output) * */ long Convert_UTM_To_MGRS (long Zone, char Hemisphere, double Easting, double Northing, long Precision, char *MGRS); /* * The function Convert_UTM_To_MGRS converts UTM (zone, easting, and * northing) coordinates to an MGRS coordinate string, according to the * current ellipsoid parameters. If any errors occur, the error code(s) * are returned by the function, otherwise MGRS_NO_ERROR is returned. * * Zone : UTM zone (input) * Hemisphere : North or South hemisphere (input) * Easting : Easting (X) in meters (input) * Northing : Northing (Y) in meters (input) * Precision : Precision level of MGRS string (input) * MGRS : MGRS coordinate string (output) */ long Convert_MGRS_To_UTM (char *MGRS, long *Zone, char *Hemisphere, double *Easting, double *Northing); /* * The function Convert_MGRS_To_UTM converts an MGRS coordinate string * to UTM projection (zone, hemisphere, easting and northing) coordinates * according to the current ellipsoid parameters. If any errors occur, * the error code(s) are returned by the function, otherwise UTM_NO_ERROR * is returned. * * MGRS : MGRS coordinate string (input) * Zone : UTM zone (output) * Hemisphere : North or South hemisphere (output) * Easting : Easting (X) in meters (output) * Northing : Northing (Y) in meters (output) */ long Convert_UPS_To_MGRS ( char Hemisphere, double Easting, double Northing, long Precision, char *MGRS); /* * The function Convert_UPS_To_MGRS converts UPS (hemisphere, easting, * and northing) coordinates to an MGRS coordinate string according to * the current ellipsoid parameters. If any errors occur, the error * code(s) are returned by the function, otherwise UPS_NO_ERROR is * returned. * * Hemisphere : Hemisphere either 'N' or 'S' (input) * Easting : Easting/X in meters (input) * Northing : Northing/Y in meters (input) * Precision : Precision level of MGRS string (input) * MGRS : MGRS coordinate string (output) */ long Convert_MGRS_To_UPS ( char *MGRS, char *Hemisphere, double *Easting, double *Northing); /* * The function Convert_MGRS_To_UPS converts an MGRS coordinate string * to UPS (hemisphere, easting, and northing) coordinates, according * to the current ellipsoid parameters. If any errors occur, the error * code(s) are returned by the function, otherwide UPS_NO_ERROR is returned. * * MGRS : MGRS coordinate string (input) * Hemisphere : Hemisphere either 'N' or 'S' (output) * Easting : Easting/X in meters (output) * Northing : Northing/Y in meters (output) */ #ifdef __cplusplus } #endif #endif /* MGRS_H */