EVOLUTION-MANAGER

Edit File: sysvars_server_notembedded,32bit.rdiff

--- sysvars_server_notembedded.result 2017-12-15 20:57:40.174654761 +0200 +++ sysvars_server_notembedded,32bit.reject 2017-12-15 21:02:20.476044700 +0200 @@ -58,7 +58,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE 1 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Auto-increment columns are incremented by this NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 65535 @@ -72,7 +72,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Offset added to Auto-increment columns. Used when auto-increment-increment != 1 NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 65535 @@ -86,7 +86,7 @@ GLOBAL_VALUE_ORIGIN AUTO DEFAULT_VALUE 150 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The number of outstanding connection requests MariaDB can have. This comes into play when the main MariaDB thread gets very many connection requests in a very short time NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 65535 @@ -159,7 +159,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT The size of the transactional cache for updates to transactional engines for the binary log. If you often use transactions containing many statements, you can increase this to get more performance NUMERIC_MIN_VALUE 4096 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 4096 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -184,10 +184,10 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 0 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT If non-zero, binlog write will wait at most binlog_commit_wait_usec microseconds for at least this many commits to queue up for group commit to the binlog. This can reduce I/O on the binlog and provide increased opportunity for parallel apply on the slave, but too high a value will decrease commit throughput. NUMERIC_MIN_VALUE 0 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -198,10 +198,10 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 100000 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum time, in microseconds, to wait for more commits to queue up for binlog group commit. Only takes effect if the value of binlog_commit_wait_count is non-zero. NUMERIC_MIN_VALUE 0 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -229,7 +229,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT The size of file cache for the binary log NUMERIC_MIN_VALUE 8192 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 4096 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -285,7 +285,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT The size of the statement cache for updates to non-transactional engines for the binary log. If you often use statements updating a great number of rows, you can increase this to get more performance. NUMERIC_MIN_VALUE 4096 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 4096 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -299,7 +299,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT Size of tree cache used in bulk insert optimisation. Note that this is a limit per thread! NUMERIC_MIN_VALUE 0 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -562,7 +562,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE 10 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The number of seconds the mysqld server is waiting for a connect packet before responding with 'Bad handshake' NUMERIC_MIN_VALUE 2 NUMERIC_MAX_VALUE 31536000 @@ -618,7 +618,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 15 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Long search depth for the two-step deadlock detection NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 33 @@ -632,7 +632,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 4 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Short search depth for the two-step deadlock detection NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 32 @@ -646,7 +646,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 50000000 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Long timeout for the two-step deadlock detection (in microseconds) NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 4294967295 @@ -660,7 +660,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 10000 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Short timeout for the two-step deadlock detection (in microseconds) NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 4294967295 @@ -730,7 +730,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 0 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The default week format used by WEEK() functions NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 7 @@ -744,7 +744,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 100 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT After inserting delayed_insert_limit rows, the INSERT DELAYED handler will check if there are any SELECT statements pending. If so, it allows these to execute before continuing. NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 4294967295 @@ -758,7 +758,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 300 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT How long a INSERT DELAYED thread should wait for INSERT statements before terminating NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 31536000 @@ -772,7 +772,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1000 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT What size queue (in rows) should be allocated for handling INSERT DELAYED. If the queue becomes full, any client that does INSERT DELAYED will wait until there is room in the queue again NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 4294967295 @@ -800,7 +800,7 @@ GLOBAL_VALUE_ORIGIN SQL DEFAULT_VALUE 4 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Precision of the result of '/' operator will be increased on that value NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 38 @@ -912,7 +912,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 0 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT If non-zero, binary logs will be purged after expire_logs_days days; possible purges happen at startup and at binary log rotation NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 99 @@ -954,7 +954,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The number of connections on extra-port NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 100000 @@ -996,7 +996,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 0 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT A dedicated thread is created to flush all tables at the given interval NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 31536000 @@ -1038,7 +1038,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 84 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The maximum length of the word to be included in a FULLTEXT index. Note: FULLTEXT indexes must be rebuilt after changing this variable NUMERIC_MIN_VALUE 10 NUMERIC_MAX_VALUE 84 @@ -1052,7 +1052,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 4 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The minimum length of the word to be included in a FULLTEXT index. Note: FULLTEXT indexes must be rebuilt after changing this variable NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 84 @@ -1066,7 +1066,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 20 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Number of best matches to use for query expansion NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 1000 @@ -1125,7 +1125,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT The maximum length of the result of function GROUP_CONCAT() NUMERIC_MIN_VALUE 4 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -1374,7 +1374,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 0 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Number of bytes used for a histogram. If set to 0, no histograms are created by ANALYZE. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 255 @@ -1402,7 +1402,7 @@ GLOBAL_VALUE_ORIGIN AUTO DEFAULT_VALUE 128 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT How many host names should be cached to avoid resolving. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 65536 @@ -1556,7 +1556,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 28800 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The number of seconds the server waits for activity on an interactive connection before closing it NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 31536000 @@ -1570,10 +1570,10 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1000 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The minimum number of scalar elements in the value list of IN predicate that triggers its conversion to IN subquery NUMERIC_MIN_VALUE 0 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -1601,7 +1601,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT The size of the buffer that is used for joins NUMERIC_MIN_VALUE 128 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 128 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -1626,7 +1626,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 2 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Controls what join operations can be executed with join buffers. Odd numbers are used for plain join buffers while even numbers are used for linked buffers NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 8 @@ -1657,7 +1657,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT The size of the buffer used for index blocks for MyISAM tables. Increase this to get better index handling (for all reads and multiple writes) to as much as you can afford NUMERIC_MIN_VALUE 0 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 4096 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -1878,7 +1878,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 86400 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Timeout in seconds to wait for a lock before returning an error. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 31536000 @@ -2088,7 +2088,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Write to slow log every #th slow query. Set to 1 to log everything. Increase it to reduce the size of the slow or the performance impact of slow logging NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 4294967295 @@ -2130,7 +2130,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 2 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Log some not critical warnings to the general log file.Value can be between 0 and 11. Higher values mean more verbosity NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 4294967295 @@ -2186,7 +2186,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 16777216 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Max packet length to send to or receive from the server NUMERIC_MIN_VALUE 1024 NUMERIC_MAX_VALUE 1073741824 @@ -2196,14 +2196,14 @@ COMMAND_LINE_ARGUMENT REQUIRED VARIABLE_NAME MAX_BINLOG_CACHE_SIZE SESSION_VALUE NULL -GLOBAL_VALUE 18446744073709547520 +GLOBAL_VALUE 4294963200 GLOBAL_VALUE_ORIGIN COMPILE-TIME -DEFAULT_VALUE 18446744073709547520 +DEFAULT_VALUE 4294963200 VARIABLE_SCOPE GLOBAL VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT Sets the total size of the transactional cache NUMERIC_MIN_VALUE 4096 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 4096 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -2214,7 +2214,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1073741824 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Binary log will be rotated automatically when the size exceeds this value. NUMERIC_MIN_VALUE 4096 NUMERIC_MAX_VALUE 1073741824 @@ -2224,14 +2224,14 @@ COMMAND_LINE_ARGUMENT REQUIRED VARIABLE_NAME MAX_BINLOG_STMT_CACHE_SIZE SESSION_VALUE NULL -GLOBAL_VALUE 18446744073709547520 +GLOBAL_VALUE 4294963200 GLOBAL_VALUE_ORIGIN COMPILE-TIME -DEFAULT_VALUE 18446744073709547520 +DEFAULT_VALUE 4294963200 VARIABLE_SCOPE GLOBAL VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT Sets the total size of the statement cache NUMERIC_MIN_VALUE 4096 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 4096 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -2242,7 +2242,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 151 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The number of simultaneous clients allowed NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 100000 @@ -2256,7 +2256,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 100 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT If there is more than this number of interrupted connections from a host this host will be blocked from further connections NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 4294967295 @@ -2270,7 +2270,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 20 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Don't start more than this number of threads to handle INSERT DELAYED statements. If set to zero INSERT DELAYED will be not used NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 16384 @@ -2298,7 +2298,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 64 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Max number of errors/warnings to store for a statement NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 65535 @@ -2315,7 +2315,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT Don't allow creation of heap tables bigger than this NUMERIC_MIN_VALUE 16384 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1024 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -2326,7 +2326,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 20 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Don't start more than this number of threads to handle INSERT DELAYED statements. If set to zero INSERT DELAYED will be not used NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 16384 @@ -2354,7 +2354,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1024 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Max number of bytes in sorted records NUMERIC_MIN_VALUE 4 NUMERIC_MAX_VALUE 8388608 @@ -2368,7 +2368,7 @@ GLOBAL_VALUE_ORIGIN AUTO DEFAULT_VALUE 1048576 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The maximum BLOB length to send to server from mysql_send_long_data API. Deprecated option; use max_allowed_packet instead. NUMERIC_MIN_VALUE 1024 NUMERIC_MAX_VALUE 4294967295 @@ -2382,7 +2382,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 16382 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum number of prepared statements in the server NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 1048576 @@ -2396,7 +2396,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 4294967295 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum number of iterations when executing recursive queries NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 4294967295 @@ -2424,7 +2424,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 4294967295 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Limit assumed max number of seeks when looking up rows based on a key NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 4294967295 @@ -2452,7 +2452,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1024 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The number of bytes to use when sorting BLOB or TEXT values (only the first max_sort_length bytes of each value are used; the rest are ignored) NUMERIC_MIN_VALUE 4 NUMERIC_MAX_VALUE 8388608 @@ -2466,7 +2466,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 0 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum stored procedure recursion depth NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 255 @@ -2494,7 +2494,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 32 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Unused, will be removed. NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 4294967295 @@ -2522,7 +2522,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 4294967295 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT After this many write locks, allow some read locks to run in between NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 4294967295 @@ -2536,7 +2536,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1024 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Unused NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 1048576 @@ -2550,7 +2550,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 8 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Unused NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 1024 @@ -2564,7 +2564,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 0 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Don't write queries to slow log that examine fewer rows than that NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 4294967295 @@ -2578,7 +2578,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 262144 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Size of buffer to use when using MRR with range access NUMERIC_MIN_VALUE 8192 NUMERIC_MAX_VALUE 2147483647 @@ -2592,10 +2592,10 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 256 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Ignored. Use mrr_buffer_size instead NUMERIC_MIN_VALUE 1 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -2606,7 +2606,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1024 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Block size to be used for MyISAM index pages NUMERIC_MIN_VALUE 1024 NUMERIC_MAX_VALUE 16384 @@ -2620,7 +2620,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 6 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Default pointer size to be used for MyISAM tables NUMERIC_MIN_VALUE 2 NUMERIC_MAX_VALUE 7 @@ -2630,9 +2630,9 @@ COMMAND_LINE_ARGUMENT REQUIRED VARIABLE_NAME MYISAM_MAX_SORT_FILE_SIZE SESSION_VALUE NULL -GLOBAL_VALUE 9223372036853727232 +GLOBAL_VALUE 2146435072 GLOBAL_VALUE_ORIGIN COMPILE-TIME -DEFAULT_VALUE 9223372036853727232 +DEFAULT_VALUE 2146435072 VARIABLE_SCOPE GLOBAL VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT Don't use the fast sort index method to created index if the temporary file would get bigger than this @@ -2644,14 +2644,14 @@ COMMAND_LINE_ARGUMENT REQUIRED VARIABLE_NAME MYISAM_MMAP_SIZE SESSION_VALUE NULL -GLOBAL_VALUE 18446744073709551615 +GLOBAL_VALUE 4294967295 GLOBAL_VALUE_ORIGIN COMPILE-TIME -DEFAULT_VALUE 18446744073709551615 +DEFAULT_VALUE 4294967295 VARIABLE_SCOPE GLOBAL VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT Restricts the total memory used for memory mapping of MySQL tables NUMERIC_MIN_VALUE 7 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY YES @@ -2676,10 +2676,10 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT If larger than 1, when repairing a MyISAM table all indexes will be created in parallel, with one thread per index. The value of 1 disables parallel repair NUMERIC_MIN_VALUE 1 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -2693,7 +2693,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT The buffer that is allocated when sorting the index when doing a REPAIR or when creating indexes with CREATE INDEX or ALTER TABLE NUMERIC_MIN_VALUE 4096 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -2746,7 +2746,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 16384 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Buffer length for TCP/IP and socket communication NUMERIC_MIN_VALUE 1024 NUMERIC_MAX_VALUE 1048576 @@ -2760,7 +2760,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 30 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Number of seconds to wait for more data from a connection before aborting the read NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 31536000 @@ -2774,7 +2774,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 10 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT If a read on a communication port is interrupted, retry this many times before giving up NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 4294967295 @@ -2788,7 +2788,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 60 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Number of seconds to wait for a block to be written to a connection before aborting the write NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 31536000 @@ -2858,7 +2858,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Controls the heuristic(s) applied during query optimization to prune less-promising partial plans from the optimizer search space. Meaning: 0 - do not apply any heuristic, thus perform exhaustive search; 1 - prune plans based on number of retrieved rows NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 1 @@ -2872,7 +2872,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 62 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum depth of search performed by the query optimizer. Values larger than the number of relations in a query result in better query plans, but take longer to compile a query. Values smaller than the number of tables in a relation result in faster optimization, but may produce very bad query plans. If set to 0, the system will automatically pick a reasonable value. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 62 @@ -2886,7 +2886,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 100 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Controls number of record samples to check condition selectivity NUMERIC_MIN_VALUE 10 NUMERIC_MAX_VALUE 4294967295 @@ -2914,7 +2914,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Controls selectivity of which conditions the optimizer takes into account to calculate cardinality of a partial join when it searches for the best execution plan Meaning: 1 - use selectivity of index backed range conditions to calculate the cardinality of a partial join if the last joined table is accessed by full table scan or an index scan, 2 - use selectivity of index backed range conditions to calculate the cardinality of a partial join in any case, 3 - additionally always use selectivity of range conditions that are not backed by any index to calculate the cardinality of a partial join, 4 - use histograms to calculate selectivity of range conditions that are not backed by any index to calculate the cardinality of a partial join.5 - additionally use selectivity of certain non-range predicates calculated on record samples NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 5 @@ -2942,7 +2942,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Maximum number of instrumented user@host accounts. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1048576 @@ -2956,7 +2956,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Size of the statement digest. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 200 @@ -2970,7 +2970,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Number of rows in EVENTS_STAGES_HISTORY_LONG. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1048576 @@ -2984,7 +2984,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Number of rows per thread in EVENTS_STAGES_HISTORY. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1024 @@ -2998,7 +2998,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Number of rows in EVENTS_STATEMENTS_HISTORY_LONG. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1048576 @@ -3012,7 +3012,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Number of rows per thread in EVENTS_STATEMENTS_HISTORY. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1024 @@ -3026,7 +3026,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Number of rows in EVENTS_WAITS_HISTORY_LONG. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1048576 @@ -3040,7 +3040,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Number of rows per thread in EVENTS_WAITS_HISTORY. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1024 @@ -3054,7 +3054,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Maximum number of instrumented hosts. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1048576 @@ -3068,7 +3068,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 80 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum number of condition instruments. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 256 @@ -3082,7 +3082,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Maximum number of instrumented condition objects. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1048576 @@ -3096,7 +3096,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1024 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Maximum length considered for digest text, when stored in performance_schema tables. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 1048576 @@ -3110,7 +3110,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 50 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum number of file instruments. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 256 @@ -3124,7 +3124,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 32768 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum number of opened instrumented files. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 1048576 @@ -3138,7 +3138,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Maximum number of instrumented files. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1048576 @@ -3152,7 +3152,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 200 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum number of mutex instruments. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 256 @@ -3166,7 +3166,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Maximum number of instrumented MUTEX objects. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 104857600 @@ -3180,7 +3180,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 40 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum number of rwlock instruments. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 256 @@ -3194,7 +3194,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Maximum number of instrumented RWLOCK objects. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 104857600 @@ -3208,7 +3208,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 10 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum number of socket instruments. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 256 @@ -3222,7 +3222,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Maximum number of opened instrumented sockets. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1048576 @@ -3236,7 +3236,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 160 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum number of stage instruments. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 256 @@ -3250,7 +3250,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 191 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum number of statement instruments. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 256 @@ -3264,7 +3264,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Maximum number of opened instrumented tables. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1048576 @@ -3278,7 +3278,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Maximum number of instrumented tables. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1048576 @@ -3292,7 +3292,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 50 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum number of thread instruments. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 256 @@ -3306,7 +3306,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Maximum number of instrumented threads. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1048576 @@ -3320,7 +3320,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Size of session attribute string buffer per thread. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1048576 @@ -3334,7 +3334,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 100 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum number of rows in SETUP_ACTORS. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 1024 @@ -3348,7 +3348,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 100 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum number of rows in SETUP_OBJECTS. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 1048576 @@ -3362,7 +3362,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE -1 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT +VARIABLE_TYPE INT VARIABLE_COMMENT Maximum number of instrumented users. Use 0 to disable, -1 for automated sizing. NUMERIC_MIN_VALUE -1 NUMERIC_MAX_VALUE 1048576 @@ -3432,7 +3432,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 32768 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The size of the buffer that is allocated when preloading indexes NUMERIC_MIN_VALUE 1024 NUMERIC_MAX_VALUE 1073741824 @@ -3460,7 +3460,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 15 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Number of statements about which profiling information is maintained. If set to 0, no profiles are stored. See SHOW PROFILES. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 100 @@ -3474,7 +3474,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 5 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Seconds between sending progress reports to the client for time-consuming statements. Set to 0 to disable progress reporting. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 4294967295 @@ -3558,7 +3558,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 16384 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Allocation block size for query parsing and execution NUMERIC_MIN_VALUE 1024 NUMERIC_MAX_VALUE 4294967295 @@ -3572,7 +3572,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1048576 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Don't cache results that are bigger than this NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 4294967295 @@ -3586,7 +3586,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 4096 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The minimum size for blocks allocated by the query cache NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 4294967295 @@ -3603,7 +3603,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT The memory allocated to store results from old queries NUMERIC_MIN_VALUE 0 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1024 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -3656,7 +3656,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 24576 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Persistent buffer for query parsing and execution NUMERIC_MIN_VALUE 1024 NUMERIC_MAX_VALUE 4294967295 @@ -3670,7 +3670,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 4096 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Allocation block size for storing ranges during optimization NUMERIC_MIN_VALUE 4096 NUMERIC_MAX_VALUE 4294967295 @@ -3687,7 +3687,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT Maximum speed(KB/s) to read binlog from master (0 = no limit) NUMERIC_MIN_VALUE 0 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -3698,7 +3698,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 131072 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Each thread that does a sequential scan allocates a buffer of this size for each table it scans. If you do many sequential scans, you may want to increase this value NUMERIC_MIN_VALUE 8192 NUMERIC_MAX_VALUE 2147483647 @@ -3726,7 +3726,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 262144 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT When reading rows in sorted order after a sort, the rows are read through this buffer to avoid a disk seeks NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 2147483647 @@ -4006,10 +4006,10 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 8388608 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The size of the buffers used [NOT] IN evaluation via partial matching NUMERIC_MIN_VALUE 0 -NUMERIC_MAX_VALUE 9223372036854775807 +NUMERIC_MAX_VALUE 2147483647 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -4034,10 +4034,10 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 10000 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The timeout value (in ms) for semi-synchronous replication in the master NUMERIC_MIN_VALUE 0 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -4048,10 +4048,10 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 32 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The tracing level for semi-sync replication. NUMERIC_MIN_VALUE 0 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -4132,10 +4132,10 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 32 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The tracing level for semi-sync replication. NUMERIC_MIN_VALUE 0 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -4174,7 +4174,7 @@ GLOBAL_VALUE_ORIGIN CONFIG DEFAULT_VALUE 1 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Uniquely identifies the server instance in the community of replication partners NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 4294967295 @@ -4356,7 +4356,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 0 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Maximum number of parallel threads to use on slave for events in a single replication domain. When using multiple domains, this can be used to limit a single domain from grabbing all threads and thus stalling other domains. The default of 0 means to allow a domain to grab as many threads as it wants, up to the value of slave_parallel_threads. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 16383 @@ -4398,7 +4398,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 1073741824 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The maximum packet length to sent successfully from the master to slave. NUMERIC_MIN_VALUE 1024 NUMERIC_MAX_VALUE 1073741824 @@ -4426,7 +4426,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 131072 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Limit on how much memory SQL threads should use per parallel replication thread when reading ahead in the relay log looking for opportunities for parallel replication. Only used when --slave-parallel-threads > 0. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 2147483647 @@ -4454,7 +4454,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 0 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT If non-zero, number of threads to spawn to apply in parallel events on the slave that were group-committed on the master or were logged with GTID in different replication domains. Note that these threads are in addition to the IO and SQL threads, which are always created by a replication slave NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 16383 @@ -4468,7 +4468,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 0 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Alias for slave_parallel_threads NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 16383 @@ -4524,7 +4524,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 10 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Number of times the slave SQL thread will retry a transaction in case it failed with a deadlock, elapsed lock wait timeout or listed in slave_transaction_retry_errors, before giving up and stopping NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 4294967295 @@ -4552,7 +4552,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 0 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Interval of the slave SQL thread will retry a transaction in case it failed with a deadlock or elapsed lock wait timeout or listed in slave_transaction_retry_errors NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 3600 @@ -4580,7 +4580,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 2 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT If creating the thread takes longer than this value (in seconds), the Slow_launch_threads counter will be incremented NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 31536000 @@ -4639,7 +4639,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT Each thread that needs to do a sort allocates a buffer of this size NUMERIC_MIN_VALUE 1024 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -4944,7 +4944,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 256 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The soft upper limit for number of cached stored routines for one connection. NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 524288 @@ -5042,7 +5042,7 @@ GLOBAL_VALUE_ORIGIN AUTO DEFAULT_VALUE 400 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The number of cached table definitions NUMERIC_MIN_VALUE 400 NUMERIC_MAX_VALUE 524288 @@ -5056,7 +5056,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 2000 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The number of cached open tables NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 1048576 @@ -5126,7 +5126,7 @@ GLOBAL_VALUE_ORIGIN AUTO DEFAULT_VALUE 256 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT How many threads we should keep in a cache for reuse. These are freed after 5 minutes of idle time NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 16384 @@ -5140,7 +5140,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 10 VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Permits the application to give the threads system a hint for the desired number of threads that should be run at the same time.This variable has no effect, and is deprecated. It will be removed in a future release. NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 512 @@ -5345,15 +5345,15 @@ READ_ONLY YES COMMAND_LINE_ARGUMENT REQUIRED VARIABLE_NAME TMP_DISK_TABLE_SIZE -SESSION_VALUE 18446744073709551615 -GLOBAL_VALUE 18446744073709551615 +SESSION_VALUE 4294967295 +GLOBAL_VALUE 4294967295 GLOBAL_VALUE_ORIGIN COMPILE-TIME -DEFAULT_VALUE 18446744073709551615 +DEFAULT_VALUE 4294967295 VARIABLE_SCOPE SESSION VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT Max size for data for an internal temporary on-disk MyISAM or Aria table. NUMERIC_MIN_VALUE 1024 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -5367,7 +5367,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT If an internal in-memory temporary table exceeds this size, MariaDB will automatically convert it to an on-disk MyISAM or Aria table. Same as tmp_table_size. NUMERIC_MIN_VALUE 1024 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -5381,7 +5381,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT Alias for tmp_memory_table_size. If an internal in-memory temporary table exceeds this size, MariaDB will automatically convert it to an on-disk MyISAM or Aria table. NUMERIC_MIN_VALUE 1024 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -5392,7 +5392,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 8192 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Allocation block size for transactions to be stored in binary log NUMERIC_MIN_VALUE 1024 NUMERIC_MAX_VALUE 134217728 @@ -5406,7 +5406,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 4096 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Persistent buffer for transactions to be stored in binary log NUMERIC_MIN_VALUE 1024 NUMERIC_MAX_VALUE 134217728 @@ -5504,7 +5504,7 @@ GLOBAL_VALUE_ORIGIN COMPILE-TIME DEFAULT_VALUE 28800 VARIABLE_SCOPE SESSION -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT The number of seconds the server waits for activity on a connection before closing it NUMERIC_MIN_VALUE 1 NUMERIC_MAX_VALUE 31536000 @@ -5609,7 +5609,7 @@ COMMAND_LINE_ARGUMENT OPTIONAL VARIABLE_NAME OPEN_FILES_LIMIT VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT If this is not 0, then mysqld will use this value to reserve file descriptors to use with setrlimit(). If this value is 0 or autoset then mysqld will reserve max_connections*5 or max_connections + table_cache*2 (whichever is larger) number of file descriptors NUMERIC_MIN_VALUE 0 NUMERIC_MAX_VALUE 4294967295 @@ -5622,7 +5622,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT Sets the internal state of the RAND() generator for replication purposes NUMERIC_MIN_VALUE 0 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -5632,7 +5632,7 @@ VARIABLE_TYPE BIGINT UNSIGNED VARIABLE_COMMENT Sets the internal state of the RAND() generator for replication purposes NUMERIC_MIN_VALUE 0 -NUMERIC_MAX_VALUE 18446744073709551615 +NUMERIC_MAX_VALUE 4294967295 NUMERIC_BLOCK_SIZE 1 ENUM_VALUE_LIST NULL READ_ONLY NO @@ -5727,7 +5727,7 @@ VARIABLE_NAME LOG_TC_SIZE GLOBAL_VALUE_ORIGIN AUTO VARIABLE_SCOPE GLOBAL -VARIABLE_TYPE BIGINT UNSIGNED +VARIABLE_TYPE INT UNSIGNED VARIABLE_COMMENT Size of transaction coordinator log. ENUM_VALUE_LIST NULL READ_ONLY YES