EVOLUTION-MANAGER

Edit File: rpl_semisync_ali_issues.result

include/master-slave.inc
[connection master]
CALL mtr.add_suppression("Failed to start semi-sync ACK receiver thread.*");
CALL mtr.add_suppression("Failed to register slave to semi-sync ACK receiver thread.*");
CALL mtr.add_suppression("Failed to stop ack receiver thread on pthread_join.*");
CALL mtr.add_suppression("Got an error reading communication packets:*");
CALL mtr.add_suppression("Timeout waiting for reply of binlog*");
CALL mtr.add_suppression("slave_read_sync_header*");
CALL mtr.add_suppression("Missing magic number for semi-sync*");
CALL mtr.add_suppression("Got timeout reading communication packets*");
CALL mtr.add_suppression("Failed to call*");
CALL mtr.add_suppression("Execution failed on master*");
CALL mtr.add_suppression("Failed on request_dump()*");
CALL mtr.add_suppression("Semi-sync master failed on*");
CALL mtr.add_suppression("Master command COM_BINLOG_DUMP failed*");
CALL mtr.add_suppression("on master failed*");
CALL mtr.add_suppression("Master server does not support semi-sync*");
CALL mtr.add_suppression("Semi-sync slave net_flush*");
CALL mtr.add_suppression("Failed to flush master info*");
CALL mtr.add_suppression("Request to stop slave SQL Thread received while apply*");
connection master;
[ enable semi-sync on master ]
set global rpl_semi_sync_master_enabled = 1;
show variables like 'rpl_semi_sync_master_enabled';
Variable_name	Value
rpl_semi_sync_master_enabled	ON
connection slave;
[ enable semi-sync on slave ]
stop slave;
set global rpl_semi_sync_slave_enabled = 1;
start slave;
show status like 'rpl_semi_sync_slave%';
Variable_name	Value
Rpl_semi_sync_slave_send_ack	0
Rpl_semi_sync_slave_status	ON
connection master;
CREATE TABLE t1(a INT) ENGINE=InnoDB;
connection slave;
connection master;
connect con1,localhost,root,,;
connect con2,localhost,root,,;
connect con3,localhost,root,,;
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	1
show status like "rpl_semi_sync_master_yes_tx";
Variable_name	Value
Rpl_semi_sync_master_yes_tx	1
#########################################
# Test rpl_semi_sync_master_wait_point  #
#########################################
# Test after_sync and after_commit first.
#Test after_sync
connection con1;
SET GLOBAL rpl_semi_sync_master_timeout = 1000000;
SET GLOBAL rpl_semi_sync_master_wait_point= 'AFTER_SYNC';
SET DEBUG_SYNC= "commit_before_get_LOCK_commit_ordered SIGNAL after_sync_done WAIT_FOR end";
INSERT into t1 values (1);;
connection con2;
SET DEBUG_SYNC= "now WAIT_FOR after_sync_done";
connection slave;
#slave can see record (1) after sync slave with master
select * from t1;
a
1
connection con2;
#con2 shouldn't see record (1)
select * from t1;
a
SET DEBUG_SYNC= "now SIGNAL end";
connection con1;
connection con1;
select * from t1;
a
1
truncate table t1;
connection slave;
connection con1;
SET DEBUG_SYNC= 'reset';
SET DEBUG_SYNC= "commit_before_get_LOCK_log SIGNAL before_fetch_done WAIT_FOR more_queue";
INSERT into t1 VALUES (1);;
connection con2;
SET DEBUG_SYNC= "now WAIT_FOR before_fetch_done";
SET DEBUG_SYNC= "after_semisync_queue SIGNAL more_queue";
INSERT INTO t1 VALUES (2);
connection con1;
connection con1;
SET DEBUG_SYNC= 'reset';
SET DEBUG_SYNC= "commit_before_get_LOCK_log SIGNAL before_fetch_done WAIT_FOR disable_semisync";
INSERT into t1 VALUES (3);;
connection con2;
SET DEBUG_SYNC= "now WAIT_FOR before_fetch_done";
SET GLOBAL rpl_semi_sync_master_enabled= 0;
SET DEBUG_SYNC= "now SIGNAL disable_semisync";
connection con1;
SET GLOBAL rpl_semi_sync_master_enabled = 1;
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	1
#Test after_commit
connection con1;
SET GLOBAL rpl_semi_sync_master_wait_point= 'AFTER_COMMIT';
SET DEBUG_SYNC= "after_group_after_commit SIGNAL after_commit_done WAIT_FOR end";
INSERT into t1 values (4);;
connection con2;
SET DEBUG_SYNC= "now WAIT_FOR after_commit_done";
connection slave;
select * from t1;
a
1
2
3
4
connection con2;
select * from t1;
a
1
2
3
4
SET DEBUG_SYNC= "now SIGNAL end";
connection con1;
connection con1;
select * from t1;
a
1
2
3
4
truncate table t1;
#######################################################
# Test some other options in order to cover the patch #
#######################################################
connection slave;
# Test rpl_semi_sync_slave_trace_level
SET GLOBAL rpl_semi_sync_slave_trace_level= 1;
SET GLOBAL rpl_semi_sync_slave_trace_level= 16;
SET GLOBAL rpl_semi_sync_slave_trace_level= 64;
SET GLOBAL rpl_semi_sync_slave_trace_level= 128;
SET GLOBAL rpl_semi_sync_slave_trace_level= 32;
connection master;
# Test rpl_semi_sync_master_trace_level
SET GLOBAL rpl_semi_sync_master_trace_level= 1;
SET GLOBAL rpl_semi_sync_master_trace_level= 16;
SET GLOBAL rpl_semi_sync_master_trace_level= 64;
SET GLOBAL rpl_semi_sync_master_trace_level= 128;
SET GLOBAL rpl_semi_sync_master_trace_level= 32;
# Test rpl_semi_sync_master_timeout
SET GLOBAL rpl_semi_sync_master_timeout= 1000;
SET GLOBAL rpl_semi_sync_master_timeout= 10000;
SET GLOBAL rpl_semi_sync_master_timeout = 1000000;
# Test rpl_semi_sync_slave_kill_conn_timeout
SET GLOBAL rpl_semi_sync_slave_kill_conn_timeout= 10;
SET GLOBAL rpl_semi_sync_slave_kill_conn_timeout= 20;
SET GLOBAL rpl_semi_sync_slave_kill_conn_timeout= 60;
SET GLOBAL rpl_semi_sync_slave_kill_conn_timeout= 5;
############################################
# Test rpl_semi_sync_master_wait_no_slave  #
############################################
SET GLOBAL rpl_semi_sync_master_wait_no_slave = 1;
connection slave;
STOP SLAVE IO_THREAD;
include/wait_for_slave_io_to_stop.inc
connection con1;
SET GLOBAL rpl_semi_sync_master_timeout = 1000;
INSERT INTO t1 values (1);;
connection con1;
# Rpl_semi_sync_master_no_tx should be non-zero
SHOW STATUS LIKE 'Rpl_semi_sync_master_no_tx'
connection slave;
START SLAVE IO_THREAD;
include/wait_for_slave_io_to_start.inc
connection con1;
INSERT INTO t1 values (2);
connection slave;
connection con1;
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	1
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	ON
connection slave;
STOP SLAVE IO_THREAD;
include/wait_for_slave_io_to_stop.inc
connection con1;
SET GLOBAL rpl_semi_sync_master_wait_no_slave= 0;
SET GLOBAL rpl_semi_sync_master_timeout= 1000000000;
INSERT INTO t1 values (3);
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	0
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	OFF
connection slave;
START SLAVE IO_THREAD;
include/wait_for_slave_io_to_start.inc
connection con1;
SET GLOBAL rpl_semi_sync_master_timeout= 10000000;
SET GLOBAL rpl_semi_sync_master_wait_no_slave= 1;
INSERT INTO t1 values (4);
connection slave;
connection con1;
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	ON
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	1
##########################################
# Test rpl_semi_sync_slave_delay_master  #
##########################################
connection slave;
SET GLOBAL rpl_semi_sync_slave_delay_master= 1;
START SLAVE IO_THREAD;
Warnings:
Note	1254	Slave is already running
include/wait_for_slave_io_to_start.inc
connection con1;
INSERT INTO t1 values (3);
include/sync_slave_io_with_master.inc
connection con1;
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	1
show status like 'Rpl_semi_sync_master_status';
Variable_name	Value
Rpl_semi_sync_master_status	ON
connection slave;
connection slave;
select * from t1 order by a;
a
1
2
3
3
4
connection con1;
select * from t1 order by a;
a
1
2
3
3
4
connection slave;
SET GLOBAL rpl_semi_sync_slave_delay_master = 0;
STOP SLAVE IO_THREAD;
include/wait_for_slave_io_to_stop.inc
START SLAVE IO_THREAD;
include/wait_for_slave_io_to_start.inc
##########################################################
# Test rpl_semi_sync_master_enabled and new ACK thread   #
#########################################################
connection con1;
SET GLOBAL rpl_semi_sync_master_enabled = 0;
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	1
INSERT INTO t1 VALUES (1);
SET GLOBAL rpl_semi_sync_master_enabled = 1;
INSERT INTO t1 VALUES (2);
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	1
# Test failure of select error .
SET GLOBAL debug = 'd,rpl_semisync_simulate_select_error';
Warnings:
Warning	1287	'@@debug' is deprecated and will be removed in a future release. Please use '@@debug_dbug' instead
INSERT INTO t1 VALUES(3);
connection slave;
connection con1;
# Test failure of pthread_create
SET GLOBAL rpl_semi_sync_master_enabled = 0;
SET GLOBAL debug = 'd,rpl_semisync_simulate_create_thread_failure';
Warnings:
Warning	1287	'@@debug' is deprecated and will be removed in a future release. Please use '@@debug_dbug' instead
SET GLOBAL rpl_semi_sync_master_enabled= ON;
# Test failure of pthread_join
SET GLOBAL rpl_semi_sync_master_enabled= OFF;
#
# Failure on registering semisync slave
#
SET GLOBAL debug= 'd,rpl_semisync_simulate_add_slave_failure';
Warnings:
Warning	1287	'@@debug' is deprecated and will be removed in a future release. Please use '@@debug_dbug' instead
SET GLOBAL rpl_semi_sync_master_enabled= ON;
connection slave;
STOP SLAVE IO_THREAD;
include/wait_for_slave_io_to_stop.inc
START SLAVE IO_THREAD;
include/wait_for_slave_io_to_start.inc
connection con1;
SET GLOBAL debug='';
Warnings:
Warning	1287	'@@debug' is deprecated and will be removed in a future release. Please use '@@debug_dbug' instead
connection slave;
START SLAVE IO_THREAD;
include/wait_for_slave_io_to_start.inc
connection con1;
connection slave;
show status like 'Rpl_semi_sync_master_clients';
Variable_name	Value
Rpl_semi_sync_master_clients	0
##################################################################
# Test fixing of BUG#70669                                       #
#SLAVE CAN'T CONTINUE REPLICATION AFTER MASTER'S CRASH RECOVERY  #
#################################################################
connection con1;
SET GLOBAL sync_binlog = 1;
CREATE TABLE t2 (c1 INT);
connection slave;
connection con1;
INSERT INTO t2 values (1);
connection slave;
connection con2;
connection con1;
connection slave;
show tables like 't2';
Tables_in_test (t2)
t2
select * from t2;
c1
1
connection con1;
INSERT INTO t2 VALUES (2);
connection con2;
INSERT INTO t2 VALUES (3);
connection con1;
connection con2;
connection con1;
SET GLOBAL sync_binlog = 0;
DROP TABLE t2;
connection con2;
connection slave;
show tables like 't2';
Tables_in_test (t2)
connection con2;
#cleanup
connection master;
SET DEBUG_SYNC= 'reset';
disconnect con1;
disconnect con2;
disconnect con3;
SET GLOBAL rpl_semi_sync_master_timeout= 10000;
SET GLOBAL rpl_semi_sync_master_enabled = 0;
DROP TABLE t1;
connection slave;
SET GLOBAL rpl_semi_sync_slave_enabled = 0;
stop slave;
start slave;
include/rpl_end.inc