EVOLUTION-MANAGER

Edit File: innochecksum_3.test

#************************************************************
# WL6045:Improve Innochecksum
#************************************************************
--source include/innodb_page_size_small.inc

--source include/no_valgrind_without_big.inc

# Embedded server does not support crashing.
--source include/not_embedded.inc

# Avoid CrashReporter popup on Mac.
--source include/not_crashrep.inc

--echo # Set the environmental variables
let MYSQLD_BASEDIR= `SELECT @@basedir`;
let MYSQLD_DATADIR= `SELECT @@datadir`;
let SEARCH_FILE= $MYSQLTEST_VARDIR/log/my_restart.err;

call mtr.add_suppression("InnoDB: Unable to read tablespace .* page no .* into the buffer pool after 100 attempts");
call mtr.add_suppression("InnoDB: innodb_checksum_algorithm is set to.*");

--echo [1]: Further Test are for rewrite checksum (innodb|crc32|none) for all ibd file & start the server.

CREATE TABLE tab1 (pk INTEGER NOT NULL PRIMARY KEY,
linestring_key GEOMETRY NOT NULL,
linestring_nokey GEOMETRY NOT NULL)
ENGINE=InnoDB ;

INSERT INTO tab1 (pk, linestring_key, linestring_nokey)
VALUES (1, ST_GeomFromText('POINT(10 10) '), ST_GeomFromText('POINT(10 10) '));

CREATE INDEX linestring_index ON tab1(linestring_nokey(5));
ALTER TABLE tab1 ADD  KEY (linestring_key(5));

--echo # create a compressed table
CREATE TABLE tab2(col_1 CHAR (255) ,
col_2 VARCHAR (255), col_3 longtext,
col_4 longtext,col_5 longtext,
col_6 longtext , col_7 int )
engine = innodb row_format=compressed key_block_size=4;

CREATE INDEX idx1 ON tab2(col_3(10));
CREATE INDEX idx2 ON tab2(col_4(10));
CREATE INDEX idx3 ON tab2(col_5(10));

# load the with repeat function
SET @col_1 = repeat('a', 5);
SET @col_2 = repeat('b', 20);
SET @col_3 = repeat('c', 100);
SET @col_4 = repeat('d', 100);
SET @col_5 = repeat('e', 100);
SET @col_6 = repeat('f', 100);

# insert 5 records
let $i = 5;
while ($i) {
 eval INSERT INTO tab2(col_1,col_2,col_3,col_4,col_5,col_6,col_7)
 VALUES (@col_1,@col_2,@col_3,@col_4,@cl_5,@col_6,$i);
 dec $i;
}

--disable_result_log
SELECT * FROM tab2 ORDER BY col_7;

--echo # stop the server
--source include/shutdown_mysqld.inc

--echo [1(a)]: Rewrite into new checksum=InnoDB for all *.ibd file and ibdata1
--exec $INNOCHECKSUM --write=InnoDB $MYSQLD_DATADIR/test/tab1.ibd
--exec $INNOCHECKSUM --write=InnoDB $MYSQLD_DATADIR/test/tab2.ibd
--exec $INNOCHECKSUM --write=InnoDB $MYSQLD_DATADIR/ibdata1
perl;
foreach (glob("$ENV{MYSQLD_DATADIR}/*/*.ibd")) {
	system("$ENV{INNOCHECKSUM} --no-check --write=InnoDB $_")
}
EOF

--echo : start the server with innodb_checksum_algorithm=strict_innodb
--let $restart_parameters= --innodb_checksum_algorithm=strict_innodb
--source include/start_mysqld.inc

INSERT INTO tab1 (pk, linestring_key, linestring_nokey)
VALUES (2, ST_GeomFromText('LINESTRING(10 10,20 20,30 30)'), ST_GeomFromText('LINESTRING(10 10,20 20,30 30)'));

# check the table status is GOOD with DML
let $i = 6;
eval INSERT INTO tab2(col_1,col_2,col_3,col_4,col_5,col_6,col_7)
VALUES (@col_1,@col_2,@col_3,@col_4,@cl_5,@col_6,$i);

-- disable_result_log
SELECT pk,ST_AsText(linestring_key),ST_AsText(linestring_nokey)
FROM tab1 ORDER BY pk;

-- disable_result_log
SELECT * FROM tab2 ORDER BY col_7;

--echo # stop the server
--source include/shutdown_mysqld.inc

--echo [1(b)]: Rewrite into new checksum=crc32 for all *.ibd file and ibdata1
--exec $INNOCHECKSUM  --write=CRC32 $MYSQLD_DATADIR/test/tab1.ibd
--exec $INNOCHECKSUM  --write=CRC32 $MYSQLD_DATADIR/test/tab2.ibd
--exec $INNOCHECKSUM  --write=CRC32 $MYSQLD_DATADIR/ibdata1
perl;
foreach (glob("$ENV{MYSQLD_DATADIR}/*/*.ibd")) {
	system("$ENV{INNOCHECKSUM} --no-check --write=crc32 $_")
}
EOF

--echo # start the server with innodb_checksum_algorithm=strict_crc32
--let $restart_parameters= --innodb_checksum_algorithm=strict_crc32
--source include/start_mysqld.inc

# check the table status is GOOD with DML
INSERT INTO tab1 (pk, linestring_key, linestring_nokey)
VALUES (3, ST_GeomFromText('POLYGON((0 0,5 5,10 10,15 15,0 0),(10 10,20 20,30 30,40 40,10 10))'),
ST_GeomFromText('POLYGON((0 0,5 5,10 10,15 15,0 0),(10 10,20 20,30 30,40 40,10 10))'));

# load the with repeat function
SET @col_1 = repeat('g', 5);
SET @col_2 = repeat('h', 20);
SET @col_3 = repeat('i', 100);
SET @col_4 = repeat('j', 100);
SET @col_5 = repeat('k', 100);
SET @col_6 = repeat('l', 100);

# check the table status is GOOD with DML
let $i = 7;
eval INSERT INTO tab2(col_1,col_2,col_3,col_4,col_5,col_6,col_7)
VALUES (@col_1,@col_2,@col_3,@col_4,@cl_5,@col_6,$i);

# check the records from table
-- disable_result_log
SELECT pk,ST_AsText(linestring_key),ST_AsText(linestring_nokey)
FROM tab1 ORDER BY pk;

-- disable_result_log
SELECT * FROM tab2 ORDER BY col_7;

--echo # stop the server
--source include/shutdown_mysqld.inc

--echo [1(c)]: Rewrite into new checksum=none for all *.ibd file and ibdata1
--exec $INNOCHECKSUM --write=none  $MYSQLD_DATADIR/test/tab1.ibd
--exec $INNOCHECKSUM --write=none  $MYSQLD_DATADIR/test/tab2.ibd
--exec $INNOCHECKSUM --write=none $MYSQLD_DATADIR/ibdata1
perl;
foreach (glob("$ENV{MYSQLD_DATADIR}/undo*")) {
	system("$ENV{INNOCHECKSUM} --no-check --write=NONE $_")
}
foreach (glob("$ENV{MYSQLD_DATADIR}/*/*.ibd")) {
	system("$ENV{INNOCHECKSUM} --no-check --write=NONE $_")
}
EOF

--let $restart_parameters= --innodb_checksum_algorithm=strict_none
--source include/start_mysqld.inc
--let $restart_parameters=
# check the table status is GOOD with DML
INSERT INTO tab1 (pk, linestring_key, linestring_nokey)
VALUES (4, ST_GeomFromText('MULTIPOINT(0 0,5 5,10 10,20 20) '), ST_GeomFromText('MULTIPOINT(0 0,5 5,10 10,20 20) '));

# load the with repeat function
SET @col_1 = repeat('m', 5);
SET @col_2 = repeat('n', 20);
SET @col_3 = repeat('o', 100);
SET @col_4 = repeat('p', 100);
SET @col_5 = repeat('q', 100);
SET @col_6 = repeat('r', 100);

# check the table status is GOOD with DML
let $i = 8;
eval INSERT INTO tab2(col_1,col_2,col_3,col_4,col_5,col_6,col_7)
VALUES (@col_1,@col_2,@col_3,@col_4,@cl_5,@col_6,$i);

# check the records from table
-- disable_result_log
SELECT pk,ST_AsText(linestring_key),ST_AsText(linestring_nokey)
FROM tab1 ORDER BY pk;

--disable_result_log
SELECT * FROM tab2 ORDER BY col_7;
--enable_result_log

--echo # stop the server
--source include/shutdown_mysqld.inc

--echo [2]: Check the page type summary with shortform for tab1.ibd
--replace_regex /File.*.ibd/File::tab1.ibd/ /[0-9]+/#/
--exec $INNOCHECKSUM -S $MYSQLD_DATADIR/test/tab1.ibd 2>$MYSQLTEST_VARDIR/tmp/page_summary_short.txt

--echo [3]: Check the page type summary with longform for tab1.ibd
--replace_regex /File.*.ibd/File::tab1.ibd/ /[0-9]+/#/
--exec $INNOCHECKSUM --page-type-summary  $MYSQLD_DATADIR/test/tab1.ibd 2>$MYSQLTEST_VARDIR/tmp/page_summary_long.txt

--remove_file $MYSQLTEST_VARDIR/tmp/page_summary_short.txt
--remove_file $MYSQLTEST_VARDIR/tmp/page_summary_long.txt
--echo [4]: Page type dump for  with longform for tab1.ibd
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
--exec $INNOCHECKSUM --page-type-dump $MYSQLTEST_VARDIR/tmp/dump.txt $MYSQLD_DATADIR/test/tab1.ibd

perl;
use strict;
use warnings;
use File::Copy;
my $dir = $ENV{'MYSQLTEST_VARDIR'};
opendir(DIR, $dir) or die $!;
my $file= 'dump.txt';
# open file in write mode
open IN_FILE,"<", "$dir/tmp/$file" or die $!;
open OUT_FILE, ">", "$dir/tmp/innochecksum_3_tempfile" or die $!;
while(<IN_FILE>)
{
 # Replace the intergers to # and complete file path to file name only.
 $_=~ s/Filename.+/Filename::tab1.ibd/g;
 $_=~ s/\d+/#/g;
 print OUT_FILE $_;
}
close(IN_FILE);
close(OUT_FILE);
# move the new content from tmp file to the orginal file.
move ("$dir/tmp/innochecksum_3_tempfile", "$dir/tmp/$file");
closedir(DIR);
EOF

--echo # Print the contents stored in dump.txt
cat_file $MYSQLTEST_VARDIR/tmp/dump.txt;
--remove_file $MYSQLTEST_VARDIR/tmp/dump.txt

--echo # Variables used by page type dump for ibdata1
--exec $INNOCHECKSUM -v --page-type-dump $MYSQLTEST_VARDIR/tmp/dump.txt $MYSQLD_DATADIR/ibdata1 > $MYSQLTEST_VARDIR/tmp/page_verbose_summary.txt

--file_exists $MYSQLTEST_VARDIR/tmp/dump.txt
--remove_file $MYSQLTEST_VARDIR/tmp/dump.txt

perl;
use strict;
use warnings;
use File::Copy;
my $dir = $ENV{'MYSQLTEST_VARDIR'};
opendir(DIR, $dir) or die $!;
my $file= 'page_verbose_summary.txt';
# open file in write mode
open IN_FILE,"<", "$dir/tmp/$file" or die $!;
open OUT_FILE, ">", "$dir/tmp/innochecksum_3_tempfile" or die $!;
while(<IN_FILE>)
{
 # Replace complete file path to file name only.
 $_=~ s/$dir/MYSQLTEST_VARDIR/;
 # Remove debug option, which is not in all builds
 next if (/debug/);
 print OUT_FILE $_;
}
close(IN_FILE);
close(OUT_FILE);
# move the new content from tmp file to the orginal file.
move ("$dir/tmp/innochecksum_3_tempfile", "$dir/tmp/$file");
closedir(DIR);
EOF

cat_file $MYSQLTEST_VARDIR/tmp/page_verbose_summary.txt;
--remove_file $MYSQLTEST_VARDIR/tmp/page_verbose_summary.txt

--echo [5]: Page type dump for with shortform for tab1.ibd
--exec $INNOCHECKSUM -D $MYSQLTEST_VARDIR/tmp/dump.txt $MYSQLD_DATADIR/test/tab1.ibd

# Print the contents stored in dump.txt
cat_file $MYSQLTEST_VARDIR/tmp/dump.txt;
--remove_file $MYSQLTEST_VARDIR/tmp/dump.txt

--echo [6]: check the valid lower bound values for option
--echo # allow-mismatches,page,start-page,end-page
--exec $INNOCHECKSUM  --allow-mismatches=0 $MYSQLD_DATADIR/test/tab1.ibd
--exec $INNOCHECKSUM  -a 0 $MYSQLD_DATADIR/test/tab1.ibd
--exec $INNOCHECKSUM  --page=0 $MYSQLD_DATADIR/test/tab1.ibd
--exec $INNOCHECKSUM  -p 0 $MYSQLD_DATADIR/test/tab1.ibd
--exec $INNOCHECKSUM  --start-page=0 $MYSQLD_DATADIR/test/tab1.ibd
--exec $INNOCHECKSUM  -s 0 $MYSQLD_DATADIR/test/tab1.ibd
--exec $INNOCHECKSUM  --end-page=0 $MYSQLD_DATADIR/test/tab1.ibd
--exec $INNOCHECKSUM  -e 0 $MYSQLD_DATADIR/test/tab1.ibd

#
# These produce now errors
#
#--echo [7]: check the negative values for option
#--echo # allow-mismatches,page,start-page,end-page.
#--echo # They will reset to zero for negative values.
#--echo # check the invalid lower bound values
#--exec $INNOCHECKSUM  --allow-mismatches=-1 $MYSQLD_DATADIR/test/tab1.ibd
#--exec $INNOCHECKSUM  -a -1 $MYSQLD_DATADIR/test/tab1.ibd
#--exec $INNOCHECKSUM  --page=-1 $MYSQLD_DATADIR/test/tab1.ibd
#--exec $INNOCHECKSUM  -p -1 $MYSQLD_DATADIR/test/tab1.ibd
#--exec $INNOCHECKSUM  --start-page=-1 $MYSQLD_DATADIR/test/tab1.ibd
#--exec $INNOCHECKSUM  -s -1 $MYSQLD_DATADIR/test/tab1.ibd
#--exec $INNOCHECKSUM  --end-page=-1 $MYSQLD_DATADIR/test/tab1.ibd
#--exec $INNOCHECKSUM  -e -1 $MYSQLD_DATADIR/test/tab1.ibd
#
#--echo [8]: check the valid upper bound values for
#--echo # both short and long options "allow-mismatches" and "end-page"
#
#--exec $INNOCHECKSUM  --allow-mismatches=18446744073709551615 $MYSQLD_DATADIR/test/tab1.ibd
#--exec $INNOCHECKSUM  -a 18446744073709551615 $MYSQLD_DATADIR/test/tab1.ibd
#--exec $INNOCHECKSUM  --end-page=18446744073709551615 $MYSQLD_DATADIR/test/tab1.ibd
#--exec $INNOCHECKSUM  -e 18446744073709551615 $MYSQLD_DATADIR/test/tab1.ibd

--echo [9]: check the both short and long options "page" and "start-page" when
--echo # seek value is larger than file size.
--error 1
--exec $INNOCHECKSUM --page=18446744073709551615 $MYSQLD_DATADIR/test/tab1.ibd 2> $SEARCH_FILE
let SEARCH_PATTERN= Error: Unable to seek to necessary offset: Invalid argument;
--source include/search_pattern_in_file.inc

--error 1
--exec $INNOCHECKSUM -p 18446744073709551615 $MYSQLD_DATADIR/test/tab1.ibd 2> $SEARCH_FILE
let SEARCH_PATTERN= Error: Unable to seek to necessary offset: Invalid argument;
--source include/search_pattern_in_file.inc

--error 1
--exec $INNOCHECKSUM --start-page=18446744073709551615 $MYSQLD_DATADIR/test/tab1.ibd 2> $SEARCH_FILE
let SEARCH_PATTERN= Error: Unable to seek to necessary offset: Invalid argument;
--source include/search_pattern_in_file.inc

--error 1
--exec $INNOCHECKSUM -s 18446744073709551615 $MYSQLD_DATADIR/test/tab1.ibd 2> $SEARCH_FILE
let SEARCH_PATTERN= Error: Unable to seek to necessary offset: Invalid argument;
--source include/search_pattern_in_file.inc

--echo [34]: check the invalid upper bound values for options, allow-mismatches, end-page, start-page and page.
--echo # innochecksum will fail with error code: 1
--error 1
--exec $INNOCHECKSUM --allow-mismatches=18446744073709551616 $MYSQLD_DATADIR/test/tab1.ibd 2> $SEARCH_FILE
let SEARCH_PATTERN= Incorrect unsigned integer value: '18446744073709551616';
--source include/search_pattern_in_file.inc

--error 1
--exec $INNOCHECKSUM -a 18446744073709551616 $MYSQLD_DATADIR/test/tab1.ibd 2> $SEARCH_FILE
let SEARCH_PATTERN= Incorrect unsigned integer value: '18446744073709551616';
--source include/search_pattern_in_file.inc

--error 1
--exec $INNOCHECKSUM --end-page=18446744073709551616 $MYSQLD_DATADIR/test/tab1.ibd 2> $SEARCH_FILE
let SEARCH_PATTERN= Incorrect unsigned integer value: '18446744073709551616';
--source include/search_pattern_in_file.inc

--error 1
--exec $INNOCHECKSUM -e 18446744073709551616 $MYSQLD_DATADIR/test/tab1.ibd 2> $SEARCH_FILE
let SEARCH_PATTERN= Incorrect unsigned integer value: '18446744073709551616';
--source include/search_pattern_in_file.inc

--error 1
--exec $INNOCHECKSUM --page=18446744073709551616 $MYSQLD_DATADIR/test/tab1.ibd 2> $SEARCH_FILE
let SEARCH_PATTERN= Incorrect unsigned integer value: '18446744073709551616';
--source include/search_pattern_in_file.inc

--error 1
--exec $INNOCHECKSUM -p 18446744073709551616 $MYSQLD_DATADIR/test/tab1.ibd 2> $SEARCH_FILE
let SEARCH_PATTERN= Incorrect unsigned integer value: '18446744073709551616';
--source include/search_pattern_in_file.inc

--error 1
--exec $INNOCHECKSUM --start-page=18446744073709551616 $MYSQLD_DATADIR/test/tab1.ibd 2> $SEARCH_FILE
let SEARCH_PATTERN= Incorrect unsigned integer value: '18446744073709551616';
--source include/search_pattern_in_file.inc

--error 1
--exec $INNOCHECKSUM -s 18446744073709551616 $MYSQLD_DATADIR/test/tab1.ibd 2> $SEARCH_FILE
let SEARCH_PATTERN= Incorrect unsigned integer value: '18446744073709551616';
--source include/search_pattern_in_file.inc
--remove_file $SEARCH_FILE

# Cleanup
--source include/start_mysqld.inc

DROP TABLE tab1,tab2;