EVOLUTION-MANAGER

Edit File: sp_alter.result

DROP TABLE IF EXISTS t1,t2,t3;
DROP PROCEDURE IF EXISTS sp1;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET#       ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# CONTAINS SQL     ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# NO SQL     ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# READS SQL DATA     ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# MODIFIES SQL DATA     ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET#     COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# CONTAINS SQL   COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# NO SQL   COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# READS SQL DATA   COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# MODIFIES SQL DATA   COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET#       ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# CONTAINS SQL     ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# NO SQL     ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# READS SQL DATA     ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# MODIFIES SQL DATA     ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET#     COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# CONTAINS SQL   COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# NO SQL   COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# READS SQL DATA   COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# MODIFIES SQL DATA   COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET#   SQL SECURITY INVOKER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# CONTAINS SQL SQL SECURITY INVOKER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# NO SQL SQL SECURITY INVOKER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# READS SQL DATA SQL SECURITY INVOKER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# MODIFIES SQL DATA SQL SECURITY INVOKER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET#   SQL SECURITY INVOKER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# CONTAINS SQL SQL SECURITY INVOKER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# NO SQL SQL SECURITY INVOKER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# READS SQL DATA SQL SECURITY INVOKER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# MODIFIES SQL DATA SQL SECURITY INVOKER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET#   SQL SECURITY INVOKER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# CONTAINS SQL SQL SECURITY INVOKER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# NO SQL SQL SECURITY INVOKER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# READS SQL DATA SQL SECURITY INVOKER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# MODIFIES SQL DATA SQL SECURITY INVOKER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET#   SQL SECURITY INVOKER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# CONTAINS SQL SQL SECURITY INVOKER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# NO SQL SQL SECURITY INVOKER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# READS SQL DATA SQL SECURITY INVOKER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# MODIFIES SQL DATA SQL SECURITY INVOKER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET#    SQL SECURITY DEFINER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# CONTAINS SQL  SQL SECURITY DEFINER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# NO SQL  SQL SECURITY DEFINER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# READS SQL DATA  SQL SECURITY DEFINER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# MODIFIES SQL DATA  SQL SECURITY DEFINER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET#    SQL SECURITY DEFINER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# CONTAINS SQL  SQL SECURITY DEFINER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# NO SQL  SQL SECURITY DEFINER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# READS SQL DATA  SQL SECURITY DEFINER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1    #DET# MODIFIES SQL DATA  SQL SECURITY DEFINER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET#    SQL SECURITY DEFINER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# CONTAINS SQL  SQL SECURITY DEFINER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# NO SQL  SQL SECURITY DEFINER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# READS SQL DATA  SQL SECURITY DEFINER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# MODIFIES SQL DATA  SQL SECURITY DEFINER   ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET#    SQL SECURITY DEFINER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# CONTAINS SQL  SQL SECURITY DEFINER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# NO SQL  SQL SECURITY DEFINER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# READS SQL DATA  SQL SECURITY DEFINER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;
CREATE TABLE t1 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
CREATE TABLE t2 (i INTEGER NULL);
CREATE TABLE t3 (id INTEGER NOT NULL PRIMARY KEY, data INTEGER NULL);
INSERT INTO t1 VALUES(1,1),(2,1),(3,4),(4,5);
INSERT INTO t2 VALUES(1),(2),(3);
CREATE PROCEDURE sp1()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE a CHAR(16);
DECLARE b,c INT;
DECLARE cur1 CURSOR FOR SELECT id,data FROM t1;
DECLARE cur2 CURSOR FOR SELECT i FROM t2;
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = 1;
OPEN cur1;
OPEN cur2;
REPEAT
FETCH cur1 INTO a, b;
FETCH cur2 INTO c;
IF NOT done THEN
IF b < c THEN
INSERT INTO t3 VALUES (a,b);
ELSE
INSERT INTO t3 VALUES (a,c);
END IF;
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
CLOSE cur2;
END//
ALTER PROCEDURE sp1  LANGUAGE SQL #DET# MODIFIES SQL DATA  SQL SECURITY DEFINER COMMENT 'comment' ;
CALL sp1();
SELECT * FROM t1 ORDER BY id;
id	data
1	1
2	1
3	4
4	5
SELECT * FROM t2 ORDER BY i;
i
1
2
3
SELECT * FROM t3 ORDER BY id;
id	data
1	1
2	1
3	3
DROP PROCEDURE sp1;
DROP TABLE t1,t2,t3;