EVOLUTION-MANAGER

Edit File: mix_innodb_myisam_binlog.test

# Check that binlog is ok when a transaction mixes updates to InnoDB and
# MyISAM.
# It would be nice to make this a replication test, but in 4.0 the
# slave is always with --skip-innodb in the testsuite. I (Guilhem) however
# did some tests manually on a slave; tables are replicated fine and
# Exec_Master_Log_Pos advances as expected.

-- source include/have_log_bin.inc
-- source include/have_innodb.inc

call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");

--disable_warnings
drop table if exists t1, t2;
--enable_warnings

connect (con1,localhost,root,,);
connect (con2,localhost,root,,);

connection con1;
create table t1 (a int) engine=innodb;
create table t2 (a int) engine=myisam;

reset master;

begin;
insert into t1 values(1);
insert into t2 select * from t1;
commit;

source include/show_binlog_events.inc;

delete from t1;
delete from t2;
reset master;

begin;
insert into t1 values(2);
insert into t2 select * from t1;
# should say some changes to non-transact1onal tables couldn't be rolled back
rollback;

source include/show_binlog_events.inc;

delete from t1;
delete from t2;
reset master;

begin;
insert into t1 values(3);
savepoint my_savepoint;
insert into t1 values(4);
insert into t2 select * from t1;
rollback to savepoint my_savepoint;
commit;

source include/show_binlog_events.inc;

delete from t1;
delete from t2;
reset master;

begin;
insert into t1 values(5);
savepoint my_savepoint;
insert into t1 values(6);
insert into t2 select * from t1;
rollback to savepoint my_savepoint;
insert into t1 values(7);
commit;
select a from t1 order by a; # check that savepoints work :)

source include/show_binlog_events.inc;

# and when ROLLBACK is not explicit?
delete from t1;
delete from t2;
reset master;

select get_lock("a",10);
begin;
insert into t1 values(8);
insert into t2 select * from t1;
disconnect con1;

connection con2;
# We want to SHOW BINLOG EVENTS, to know what was logged. But there is no
# guarantee that logging of the terminated con1 has been done yet (it may not
# even be started, so con1 may have not even attempted to lock the binlog yet;
# so SHOW BINLOG EVENTS may come before con1 does the loggin. To be sure that
# logging has been done, we use a user lock.
select get_lock("a",10);
source include/show_binlog_events.inc;

# and when not in a transact1on?
delete from t1;
delete from t2;
reset master;

insert into t1 values(9);
insert into t2 select * from t1;

source include/show_binlog_events.inc;

# Check that when the query updat1ng the MyISAM table is the first in the
# transaction, we log it immediately.
delete from t1;
delete from t2;
reset master;

insert into t1 values(10); # first make t1 non-empty
begin;
insert into t2 select * from t1;
source include/show_binlog_events.inc;
insert into t1 values(11);
commit;

source include/show_binlog_events.inc;

# Check that things work like before this BEGIN/ROLLBACK code was added,
# when t2 is INNODB

alter table t2 engine=INNODB;

delete from t1;
delete from t2;
reset master;

begin;
insert into t1 values(12);
insert into t2 select * from t1;
commit;

source include/show_binlog_events.inc;

delete from t1;
delete from t2;
reset master;

begin;
insert into t1 values(13);
insert into t2 select * from t1;
rollback;

source include/show_binlog_events.inc;

delete from t1;
delete from t2;
reset master;

begin;
insert into t1 values(14);
savepoint my_savepoint;
insert into t1 values(15);
insert into t2 select * from t1;
rollback to savepoint my_savepoint;
commit;

source include/show_binlog_events.inc;

delete from t1;
delete from t2;
reset master;

begin;
insert into t1 values(16);
savepoint my_savepoint;
insert into t1 values(17);
insert into t2 select * from t1;
rollback to savepoint my_savepoint;
insert into t1 values(18);
commit;
select a from t1 order by a; # check that savepoints work :)

source include/show_binlog_events.inc;

# Test for BUG#5714, where a MyISAM update in the transaction used to
# release row-level locks in InnoDB

connect (con3,localhost,root,,);

connection con3;
delete from t1;
delete from t2;
--disable_warnings
alter table t2 engine=MyISAM;
--enable_warnings
insert into t1 values (1);
begin;
select * from t1 for update;

connection con2;
select (@before:=unix_timestamp())*0; # always give repeatable output
begin;
send select * from t1 for update;

connection con3;
insert into t2 values (20);

connection con2;
--error 1205
reap;
select (@after:=unix_timestamp())*0; # always give repeatable output
# verify that innodb_lock_wait_timeout was exceeded. When there was
# the bug, the reap would return immediately after the insert into t2.
select (@after-@before) >= 2;

connection con3;
commit;

connection con2;
drop table t1,t2;
commit;

# test for BUG#7947 - DO RELEASE_LOCK() not written to binlog on rollback in
# the middle of a transaction

connection con2;
begin;
create temporary table ti (a int) engine=innodb;
rollback;
insert into ti values(1);
set autocommit=0;
create temporary table t1 (a int) engine=myisam; 
commit;
insert t1 values (1); 
rollback;
create table t0 (n int);
insert t0 select * from t1;
set autocommit=1;
insert into t0 select GET_LOCK("lock1",0);
set autocommit=0;
create table t2 (n int) engine=innodb;
insert into t2 values (3); 
disconnect con2;
connection con3;
select get_lock("lock1",60);
source include/show_binlog_events.inc;
do release_lock("lock1");
drop table t0,t2;

# End of 4.1 tests

#
# Test behaviour of CREATE ... SELECT when mixing MyISAM and InnoDB tables
#

set autocommit=0;
CREATE TABLE t1 (a int, b int) engine=myisam;
reset master;
INSERT INTO t1 values (1,1),(1,2);
--error ER_DUP_ENTRY
CREATE TABLE t2 (primary key (a)) engine=innodb select * from t1;
# This should give warning
DROP TABLE if exists t2;
INSERT INTO t1 values (3,3);
--error ER_DUP_ENTRY
CREATE TEMPORARY TABLE t2 (primary key (a)) engine=innodb select * from t1;
ROLLBACK;
# This should give warning
DROP TABLE IF EXISTS t2;

CREATE TABLE t2 (a int, b int, primary key (a)) engine=innodb;
INSERT INTO t1 VALUES (4,4);
CREATE TABLE IF NOT EXISTS t2 (primary key (a)) engine=innodb select * from t1;
SELECT * from t2;
TRUNCATE table t2;
INSERT INTO t1 VALUES (5,5);
--error ER_DUP_ENTRY
INSERT INTO t2 select * from t1;
SELECT * FROM t2;
DROP TABLE t2;

INSERT INTO t1 values (6,6);
CREATE TEMPORARY TABLE t2 (a int, b int, primary key (a)) engine=innodb ;
INSERT INTO t1 values (7,7);
ROLLBACK;
INSERT INTO t1 values (8,8);
CREATE TEMPORARY TABLE IF NOT EXISTS t2 (primary key (a)) engine=innodb select * from t1;
COMMIT;
INSERT INTO t1 values (9,9);
CREATE TEMPORARY TABLE IF NOT EXISTS t2 (primary key (a)) engine=innodb select * from t1;
ROLLBACK;
SELECT * from t2;
TRUNCATE table t2;
INSERT INTO t1 values (10,10);
--error ER_DUP_ENTRY
INSERT INTO t2 select * from t1;
SELECT * from t1;
INSERT INTO t2 values (100,100);
CREATE TEMPORARY TABLE IF NOT EXISTS t2 (primary key (a)) engine=innodb select * from t1;
COMMIT;
INSERT INTO t2 values (101,101);
CREATE TEMPORARY TABLE IF NOT EXISTS t2 (primary key (a)) engine=innodb select * from t1;
ROLLBACK;
SELECT * from t2;
DROP TABLE t1,t2;
source include/show_binlog_events.inc;

# Test for BUG#16559 (ROLLBACK should always have a zero error code in
# binlog). Has to be here and not earlier, as the SELECTs influence
# XIDs differently between normal and ps-protocol (and SHOW BINLOG
# EVENTS above read XIDs).

connect (con4,localhost,root,,);
connection con3;
reset master;
create table t1 (a int) engine=innodb;
create table t2 (a int) engine=myisam;
select get_lock("a",10);
begin;
insert into t1 values(8);
insert into t2 select * from t1;

disconnect con3;

connection con4;
select get_lock("a",10); # wait for rollback to finish
if (`select @@binlog_format = 'STATEMENT' || @@binlog_format = 'MIXED'`)
{
 --let $binlog_rollback= query_get_value(SHOW BINLOG EVENTS, Pos, 11)
 --let $binlog_query= query_get_value(SHOW BINLOG EVENTS, Info, 11)
 if ($binlog_query != ROLLBACK) {
  --echo Wrong query from SHOW BINLOG EVENTS. Expected ROLLBACK, got '$binlog_query'
  --source include/show_rpl_debug_info.inc
  --die Wrong value for slave parameter
 }
}
flush logs;

let $MYSQLD_DATADIR= `select @@datadir`;
# we check that the error code of the "ROLLBACK" event is 0 and not
# ER_SERVER_SHUTDOWN (i.e. disconnection just rolls back transaction
# and does not make slave to stop)

-- source include/binlog_start_pos.inc

if (`select @@binlog_format = 'ROW'`)
{
  --echo There is nothing to roll back; transactional changes are removed from the trans cache.
}

if (`select @@binlog_format = 'STATEMENT' || @@binlog_format = 'MIXED'`)
{
  --exec $MYSQL_BINLOG --start-position=$binlog_rollback $MYSQLD_DATADIR/master-bin.000001 > $MYSQLTEST_VARDIR/tmp/mix_innodb_myisam_binlog.output

--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
  eval select
  (@a:=load_file("$MYSQLTEST_VARDIR/tmp/mix_innodb_myisam_binlog.output"))
  is not null;
  --replace_result $MYSQL_TEST_DIR MYSQL_TEST_DIR
  eval select
  @a like "%#%error_code=0%ROLLBACK\\n/*!*/;%ROLLBACK /* added by mysqlbinlog */;%" OR
  @a like "%#%error_code=0%ROLLBACK\\r\\n/*!*/;%ROLLBACK /* added by mysqlbinlog */;%",
  @a not like "%#%error_code=%error_code=%";
}
drop table t1, t2;

#
# Bug #27417  	thd->no_trans_update.stmt lost value inside of SF-exec-stack
# bug #28960    non-trans temp table changes with insert .. select
#               not binlogged after rollback
#
# testing appearence of insert into temp_table in binlog.
# There are two branches of execution that require different setup.

## send_eof() branch

# prepare

create temporary table tt (a int unique);
create table ti (a int) engine=innodb;
reset master;

# action

begin; 
insert into ti values (1); 
insert into ti values (2) ;
# This is SAFE because --binlog-direct-non-transactional-updates=FALSE
insert into tt select * from ti;
rollback;

# check

select count(*) from tt /* 2 */;
source include/show_binlog_events.inc;
select count(*) from ti /* zero */;
insert into ti select * from tt;
select * from ti /* that is what slave would miss - a bug */;

## send_error() branch
delete from ti;
delete from tt where a=1;
reset master;

# action

begin; 
insert into ti values (1); 
insert into ti values (2) /* to make the dup error in the following */; 
--error ER_DUP_ENTRY
insert into tt select * from ti /* one affected and error */;
rollback;

# check

source include/show_binlog_events.inc;
select count(*) from ti /* zero */;
insert into ti select * from tt;
select * from tt /* that is what otherwise slave missed - the bug */;

drop table ti, tt;

#
# Bug #27417 thd->no_trans_update.stmt lost value inside of SF-exec-stack
#
# Testing asserts: if there is a side effect of modifying non-transactional
# table thd->no_trans_update.stmt must be TRUE;
# the assert is active with debug build
#

--disable_warnings
drop function if exists bug27417;
drop table if exists t1,t2;
--enable_warnings
# side effect table
CREATE TABLE t1 (a int NOT NULL auto_increment primary key) ENGINE=MyISAM;
# target tables
CREATE TABLE t2 (a int NOT NULL auto_increment, PRIMARY KEY (a));

delimiter |;
create function bug27417(n int)
RETURNS int(11)
begin
  insert into t1 values (null);
  return n;
end|
delimiter ;|

reset master;

# execute

insert into t2 values (bug27417(1));
insert into t2 select bug27417(2);
reset master;

--error ER_DUP_ENTRY
insert into t2 values (bug27417(2)); 
source include/show_binlog_events.inc; /* only (!) with fixes for #23333 will show there is the query */;
select count(*) from t1 /* must be 3 */;

reset master;
select count(*) from t2;
delete from t2 where a=bug27417(3);
select count(*) from t2 /* nothing got deleted */; 
source include/show_binlog_events.inc; /* the query must be in regardless of #23333 */;
select count(*) from t1 /* must be 5 */;

--enable_info
delete t2 from t2 where t2.a=bug27417(100) /* must not affect t2 */;
--disable_info
select count(*) from t1 /* must be 7 */;

# function bug27417 remains for the following testing of bug#23333
drop table t1,t2;

#
# Bug#23333 using the patch (and the test) for bug#27471
#
# throughout the bug tests 
# t1 - non-trans side effects gatherer;
# t2 - transactional table;
#

CREATE TABLE t1 (a int  NOT NULL auto_increment primary key) ENGINE=MyISAM;
CREATE TABLE t2 (a int, PRIMARY KEY (a)) ENGINE=InnoDB;
CREATE TABLE t3 (a int, PRIMARY KEY (a), b int unique) ENGINE=MyISAM;
CREATE TABLE t4 (a int, PRIMARY KEY (a), b int unique) ENGINE=Innodb;
CREATE TABLE t5 (a int, PRIMARY KEY (a)) ENGINE=InnoDB;

#
# INSERT
#

# prepare
  
 insert into t2 values (1);
 reset master;

# execute

--error ER_DUP_ENTRY
 insert into t2 values (bug27417(1)); 
  
# check

source include/show_binlog_events.inc; /* the output must denote there is the query */;
 select count(*) from t1 /* must be 1 */;

#
# INSERT SELECT
#

# prepare
 delete from t1;
 delete from t2;
 insert into t2 values (2);
 reset master;

# execute

--error ER_DUP_ENTRY
 insert into t2 select bug27417(1) union select bug27417(2); 
  
# check

source include/show_binlog_events.inc; /* the output must denote there is the query */;
 select count(*) from t1 /* must be 2 */;

#
# UPDATE inc multi-update
#

# prepare
 delete from t1;
 insert into t3 values (1,1),(2,3),(3,4);
 reset master;

# execute
 --error ER_DUP_ENTRY
 update t3 set b=b+bug27417(1);

# check
 source include/show_binlog_events.inc; /* the output must denote there is the query */;
 select count(*) from t1 /* must be 2 */;

## multi_update::send_eof() branch

# prepare
 delete from t3;
 delete from t4;
 insert into t3 values (1,1);
 insert into t4 values (1,1),(2,2);

reset master;

# execute
 --error ER_DUP_ENTRY
 UPDATE t4,t3 SET t4.a=t3.a + bug27417(1) /* top level non-ta table */;

# check
 source include/show_binlog_events.inc; /* the output must denote there is the query */;
 select count(*) from t1 /* must be 4 */;

## send_error() branch of multi_update

# prepare
 delete from t1;
 delete from t3;
 delete from t4;
 insert into t3 values (1,1),(2,2);
 insert into t4 values (1,1),(2,2);

reset master;

# execute
 --error ER_DUP_ENTRY
 UPDATE t3,t4 SET t3.a=t4.a + bug27417(1);

# check
 select count(*) from t1 /* must be 1 */;

# cleanup
 drop table t4;

#
# DELETE incl multi-delete
#

# prepare
 delete from t1;
 delete from t2;
 delete from t3;
 insert into t2 values (1);
 insert into t3 values (1,1);
 create trigger trg_del before delete on t2 for each row 
   insert into t3 values (bug27417(1), 2);
 reset master;

# execute
 --error ER_DUP_ENTRY
 delete from t2;
# check
 source include/show_binlog_events.inc; /* the output must denote there is the query */;
 select count(*) from t1 /* must be 1 */;

# cleanup
 drop trigger trg_del;

# prepare
 delete from t1;
 delete from t2;
 delete from t5;
 create trigger trg_del_t2 after  delete on t2 for each row
   insert into t1 values (1);
 insert into t2 values (2),(3);
 insert into t5 values (1),(2);
 reset master;

# execute
 --error ER_DUP_ENTRY
 delete t2.* from t2,t5 where t2.a=t5.a + 1;

# check
 source include/show_binlog_events.inc; /* the output must denote there is the query */;
 select count(*) from t1 /* must be 1 */;

#
# LOAD DATA
#

# prepare
 delete from t1;
 create table t4 (a int default 0, b int primary key) engine=innodb;
 insert into t4 values (0, 17);
 reset master;

# execute
 --error ER_DUP_ENTRY
 load data infile '../../std_data/rpl_loaddata.dat' into table t4 (a, @b) set b= @b + bug27417(2);
# check
 select * from t4;
 select count(*) from t1 /* must be 2 */;
 source include/show_binlog_events.inc; /* the output must denote there is the query */;

#
# bug#23333 cleanup
#

drop trigger trg_del_t2;
drop table t1,t2,t3,t4,t5;
drop function bug27417;

--echo end of tests