EVOLUTION-MANAGER

Edit File: examples.txt

.. _further-examples: ================== Further Examples ================== .. currentmodule:: mock .. testsetup:: from datetime import date BackendProvider = Mock() sys.modules['mymodule'] = mymodule = Mock(name='mymodule') def grob(val): "First frob and then clear val" mymodule.frob(val) val.clear() mymodule.frob = lambda val: val mymodule.grob = grob mymodule.date = date class TestCase(unittest2.TestCase): def run(self): result = unittest2.TestResult() out = unittest2.TestCase.run(self, result) assert result.wasSuccessful() from mock import inPy3k For comprehensive examples, see the unit tests included in the full source distribution. Here are some more examples for some slightly more advanced scenarios than in the :ref:`getting started <getting-started>` guide. Mocking chained calls ===================== Mocking chained calls is actually straightforward with mock once you understand the :attr:`~Mock.return_value` attribute. When a mock is called for the first time, or you fetch its `return_value` before it has been called, a new `Mock` is created. This means that you can see how the object returned from a call to a mocked object has been used by interrogating the `return_value` mock: .. doctest:: >>> mock = Mock() >>> mock().foo(a=2, b=3) <Mock name='mock().foo()' id='...'> >>> mock.return_value.foo.assert_called_with(a=2, b=3) From here it is a simple step to configure and then make assertions about chained calls. Of course another alternative is writing your code in a more testable way in the first place... So, suppose we have some code that looks a little bit like this: .. doctest:: >>> class Something(object): ... def __init__(self): ... self.backend = BackendProvider() ... def method(self): ... response = self.backend.get_endpoint('foobar').create_call('spam', 'eggs').start_call() ... # more code Assuming that `BackendProvider` is already well tested, how do we test `method()`? Specifically, we want to test that the code section `# more code` uses the response object in the correct way. As this chain of calls is made from an instance attribute we can monkey patch the `backend` attribute on a `Something` instance. In this particular case we are only interested in the return value from the final call to `start_call` so we don't have much configuration to do. Let's assume the object it returns is 'file-like', so we'll ensure that our response object uses the builtin `file` as its `spec`. To do this we create a mock instance as our mock backend and create a mock response object for it. To set the response as the return value for that final `start_call` we could do this: `mock_backend.get_endpoint.return_value.create_call.return_value.start_call.return_value = mock_response`. We can do that in a slightly nicer way using the :meth:`~Mock.configure_mock` method to directly set the return value for us: .. doctest:: >>> something = Something() >>> mock_response = Mock(spec=file) >>> mock_backend = Mock() >>> config = {'get_endpoint.return_value.create_call.return_value.start_call.return_value': mock_response} >>> mock_backend.configure_mock(**config) With these we monkey patch the "mock backend" in place and can make the real call: .. doctest:: >>> something.backend = mock_backend >>> something.method() Using :attr:`~Mock.mock_calls` we can check the chained call with a single assert. A chained call is several calls in one line of code, so there will be several entries in `mock_calls`. We can use :meth:`call.call_list` to create this list of calls for us: .. doctest:: >>> chained = call.get_endpoint('foobar').create_call('spam', 'eggs').start_call() >>> call_list = chained.call_list() >>> assert mock_backend.mock_calls == call_list Partial mocking =============== In some tests I wanted to mock out a call to `datetime.date.today() <http://docs.python.org/library/datetime.html#datetime.date.today>`_ to return a known date, but I didn't want to prevent the code under test from creating new date objects. Unfortunately `datetime.date` is written in C, and so I couldn't just monkey-patch out the static `date.today` method. I found a simple way of doing this that involved effectively wrapping the date class with a mock, but passing through calls to the constructor to the real class (and returning real instances). The :func:`patch decorator <patch>` is used here to mock out the `date` class in the module under test. The :attr:`side_effect` attribute on the mock date class is then set to a lambda function that returns a real date. When the mock date class is called a real date will be constructed and returned by `side_effect`. .. doctest:: >>> from datetime import date >>> with patch('mymodule.date') as mock_date: ... mock_date.today.return_value = date(2010, 10, 8) ... mock_date.side_effect = lambda *args, **kw: date(*args, **kw) ... ... assert mymodule.date.today() == date(2010, 10, 8) ... assert mymodule.date(2009, 6, 8) == date(2009, 6, 8) ... Note that we don't patch `datetime.date` globally, we patch `date` in the module that *uses* it. See :ref:`where to patch <where-to-patch>`. When `date.today()` is called a known date is returned, but calls to the `date(...)` constructor still return normal dates. Without this you can find yourself having to calculate an expected result using exactly the same algorithm as the code under test, which is a classic testing anti-pattern. Calls to the date constructor are recorded in the `mock_date` attributes (`call_count` and friends) which may also be useful for your tests. An alternative way of dealing with mocking dates, or other builtin classes, is discussed in `this blog entry <http://williamjohnbert.com/2011/07/how-to-unit-testing-in-django-with-mocking-and-patching/>`_. Mocking a Generator Method ========================== A Python generator is a function or method that uses the `yield statement <http://docs.python.org/reference/simple_stmts.html#the-yield-statement>`_ to return a series of values when iterated over [#]_. A generator method / function is called to return the generator object. It is the generator object that is then iterated over. The protocol method for iteration is `__iter__ <http://docs.python.org/library/stdtypes.html#container.__iter__>`_, so we can mock this using a `MagicMock`. Here's an example class with an "iter" method implemented as a generator: .. doctest:: >>> class Foo(object): ... def iter(self): ... for i in [1, 2, 3]: ... yield i ... >>> foo = Foo() >>> list(foo.iter()) [1, 2, 3] How would we mock this class, and in particular its "iter" method? To configure the values returned from the iteration (implicit in the call to `list`), we need to configure the object returned by the call to `foo.iter()`. .. doctest:: >>> mock_foo = MagicMock() >>> mock_foo.iter.return_value = iter([1, 2, 3]) >>> list(mock_foo.iter()) [1, 2, 3] .. [#] There are also generator expressions and more `advanced uses <http://www.dabeaz.com/coroutines/index.html>`_ of generators, but we aren't concerned about them here. A very good introduction to generators and how powerful they are is: `Generator Tricks for Systems Programmers <http://www.dabeaz.com/generators/>`_. Applying the same patch to every test method ============================================ If you want several patches in place for multiple test methods the obvious way is to apply the patch decorators to every method. This can feel like unnecessary repetition. For Python 2.6 or more recent you can use `patch` (in all its various forms) as a class decorator. This applies the patches to all test methods on the class. A test method is identified by methods whose names start with `test`: .. doctest:: >>> @patch('mymodule.SomeClass') ... class MyTest(TestCase): ... ... def test_one(self, MockSomeClass): ... self.assertTrue(mymodule.SomeClass is MockSomeClass) ... ... def test_two(self, MockSomeClass): ... self.assertTrue(mymodule.SomeClass is MockSomeClass) ... ... def not_a_test(self): ... return 'something' ... >>> MyTest('test_one').test_one() >>> MyTest('test_two').test_two() >>> MyTest('test_two').not_a_test() 'something' An alternative way of managing patches is to use the :ref:`start-and-stop`. These allow you to move the patching into your `setUp` and `tearDown` methods. .. doctest:: >>> class MyTest(TestCase): ... def setUp(self): ... self.patcher = patch('mymodule.foo') ... self.mock_foo = self.patcher.start() ... ... def test_foo(self): ... self.assertTrue(mymodule.foo is self.mock_foo) ... ... def tearDown(self): ... self.patcher.stop() ... >>> MyTest('test_foo').run() If you use this technique you must ensure that the patching is "undone" by calling `stop`. This can be fiddlier than you might think, because if an exception is raised in the setUp then tearDown is not called. `unittest2 <http://pypi.python.org/pypi/unittest2>`_ cleanup functions make this simpler: .. doctest:: >>> class MyTest(TestCase): ... def setUp(self): ... patcher = patch('mymodule.foo') ... self.addCleanup(patcher.stop) ... self.mock_foo = patcher.start() ... ... def test_foo(self): ... self.assertTrue(mymodule.foo is self.mock_foo) ... >>> MyTest('test_foo').run() Mocking Unbound Methods ======================= Whilst writing tests today I needed to patch an *unbound method* (patching the method on the class rather than on the instance). I needed self to be passed in as the first argument because I want to make asserts about which objects were calling this particular method. The issue is that you can't patch with a mock for this, because if you replace an unbound method with a mock it doesn't become a bound method when fetched from the instance, and so it doesn't get self passed in. The workaround is to patch the unbound method with a real function instead. The :func:`patch` decorator makes it so simple to patch out methods with a mock that having to create a real function becomes a nuisance. If you pass `autospec=True` to patch then it does the patching with a *real* function object. This function object has the same signature as the one it is replacing, but delegates to a mock under the hood. You still get your mock auto-created in exactly the same way as before. What it means though, is that if you use it to patch out an unbound method on a class the mocked function will be turned into a bound method if it is fetched from an instance. It will have `self` passed in as the first argument, which is exactly what I wanted: .. doctest:: >>> class Foo(object): ... def foo(self): ... pass ... >>> with patch.object(Foo, 'foo', autospec=True) as mock_foo: ... mock_foo.return_value = 'foo' ... foo = Foo() ... foo.foo() ... 'foo' >>> mock_foo.assert_called_once_with(foo) If we don't use `autospec=True` then the unbound method is patched out with a Mock instance instead, and isn't called with `self`. Checking multiple calls with mock ================================= mock has a nice API for making assertions about how your mock objects are used. .. doctest:: >>> mock = Mock() >>> mock.foo_bar.return_value = None >>> mock.foo_bar('baz', spam='eggs') >>> mock.foo_bar.assert_called_with('baz', spam='eggs') If your mock is only being called once you can use the :meth:`assert_called_once_with` method that also asserts that the :attr:`call_count` is one. .. doctest:: >>> mock.foo_bar.assert_called_once_with('baz', spam='eggs') >>> mock.foo_bar() >>> mock.foo_bar.assert_called_once_with('baz', spam='eggs') Traceback (most recent call last): ... AssertionError: Expected to be called once. Called 2 times. Both `assert_called_with` and `assert_called_once_with` make assertions about the *most recent* call. If your mock is going to be called several times, and you want to make assertions about *all* those calls you can use :attr:`~Mock.call_args_list`: .. doctest:: >>> mock = Mock(return_value=None) >>> mock(1, 2, 3) >>> mock(4, 5, 6) >>> mock() >>> mock.call_args_list [call(1, 2, 3), call(4, 5, 6), call()] The :data:`call` helper makes it easy to make assertions about these calls. You can build up a list of expected calls and compare it to `call_args_list`. This looks remarkably similar to the repr of the `call_args_list`: .. doctest:: >>> expected = [call(1, 2, 3), call(4, 5, 6), call()] >>> mock.call_args_list == expected True Coping with mutable arguments ============================= Another situation is rare, but can bite you, is when your mock is called with mutable arguments. `call_args` and `call_args_list` store *references* to the arguments. If the arguments are mutated by the code under test then you can no longer make assertions about what the values were when the mock was called. Here's some example code that shows the problem. Imagine the following functions defined in 'mymodule':: def frob(val): pass def grob(val): "First frob and then clear val" frob(val) val.clear() When we try to test that `grob` calls `frob` with the correct argument look what happens: .. doctest:: >>> with patch('mymodule.frob') as mock_frob: ... val = set([6]) ... mymodule.grob(val) ... >>> val set([]) >>> mock_frob.assert_called_with(set([6])) Traceback (most recent call last): ... AssertionError: Expected: ((set([6]),), {}) Called with: ((set([]),), {}) One possibility would be for mock to copy the arguments you pass in. This could then cause problems if you do assertions that rely on object identity for equality. Here's one solution that uses the :attr:`side_effect` functionality. If you provide a `side_effect` function for a mock then `side_effect` will be called with the same args as the mock. This gives us an opportunity to copy the arguments and store them for later assertions. In this example I'm using *another* mock to store the arguments so that I can use the mock methods for doing the assertion. Again a helper function sets this up for me. .. doctest:: >>> from copy import deepcopy >>> from mock import Mock, patch, DEFAULT >>> def copy_call_args(mock): ... new_mock = Mock() ... def side_effect(*args, **kwargs): ... args = deepcopy(args) ... kwargs = deepcopy(kwargs) ... new_mock(*args, **kwargs) ... return DEFAULT ... mock.side_effect = side_effect ... return new_mock ... >>> with patch('mymodule.frob') as mock_frob: ... new_mock = copy_call_args(mock_frob) ... val = set([6]) ... mymodule.grob(val) ... >>> new_mock.assert_called_with(set([6])) >>> new_mock.call_args call(set([6])) `copy_call_args` is called with the mock that will be called. It returns a new mock that we do the assertion on. The `side_effect` function makes a copy of the args and calls our `new_mock` with the copy. .. note:: If your mock is only going to be used once there is an easier way of checking arguments at the point they are called. You can simply do the checking inside a `side_effect` function. .. doctest:: >>> def side_effect(arg): ... assert arg == set([6]) ... >>> mock = Mock(side_effect=side_effect) >>> mock(set([6])) >>> mock(set()) Traceback (most recent call last): ... AssertionError An alternative approach is to create a subclass of `Mock` or `MagicMock` that copies (using `copy.deepcopy <http://docs.python.org/library/copy.html#copy.deepcopy>`_) the arguments. Here's an example implementation: .. doctest:: >>> from copy import deepcopy >>> class CopyingMock(MagicMock): ... def __call__(self, *args, **kwargs): ... args = deepcopy(args) ... kwargs = deepcopy(kwargs) ... return super(CopyingMock, self).__call__(*args, **kwargs) ... >>> c = CopyingMock(return_value=None) >>> arg = set() >>> c(arg) >>> arg.add(1) >>> c.assert_called_with(set()) >>> c.assert_called_with(arg) Traceback (most recent call last): ... AssertionError: Expected call: mock(set([1])) Actual call: mock(set([])) >>> c.foo <CopyingMock name='mock.foo' id='...'> When you subclass `Mock` or `MagicMock` all dynamically created attributes, and the `return_value` will use your subclass automatically. That means all children of a `CopyingMock` will also have the type `CopyingMock`. Raising exceptions on attribute access ====================================== You can use :class:`PropertyMock` to mimic the behaviour of properties. This includes raising exceptions when an attribute is accessed. Here's an example raising a `ValueError` when the 'foo' attribute is accessed: .. doctest:: >>> m = MagicMock() >>> p = PropertyMock(side_effect=ValueError) >>> type(m).foo = p >>> m.foo Traceback (most recent call last): .... ValueError Because every mock object has its own type, a new subclass of whichever mock class you're using, all mock objects are isolated from each other. You can safely attach properties (or other descriptors or whatever you want in fact) to `type(mock)` without affecting other mock objects. Multiple calls with different effects ===================================== .. note:: In mock 1.0 the handling of iterable `side_effect` was changed. Any exceptions in the iterable will be raised instead of returned. Handling code that needs to behave differently on subsequent calls during the test can be tricky. For example you may have a function that needs to raise an exception the first time it is called but returns a response on the second call (testing retry behaviour). One approach is to use a :attr:`side_effect` function that replaces itself. The first time it is called the `side_effect` sets a new `side_effect` that will be used for the second call. It then raises an exception: .. doctest:: >>> def side_effect(*args): ... def second_call(*args): ... return 'response' ... mock.side_effect = second_call ... raise Exception('boom') ... >>> mock = Mock(side_effect=side_effect) >>> mock('first') Traceback (most recent call last): ... Exception: boom >>> mock('second') 'response' >>> mock.assert_called_with('second') Another perfectly valid way would be to pop return values from a list. If the return value is an exception, raise it instead of returning it: .. doctest:: >>> returns = [Exception('boom'), 'response'] >>> def side_effect(*args): ... result = returns.pop(0) ... if isinstance(result, Exception): ... raise result ... return result ... >>> mock = Mock(side_effect=side_effect) >>> mock('first') Traceback (most recent call last): ... Exception: boom >>> mock('second') 'response' >>> mock.assert_called_with('second') Which approach you prefer is a matter of taste. The first approach is actually a line shorter but maybe the second approach is more readable. Nesting Patches =============== Using patch as a context manager is nice, but if you do multiple patches you can end up with nested with statements indenting further and further to the right: .. doctest:: >>> class MyTest(TestCase): ... ... def test_foo(self): ... with patch('mymodule.Foo') as mock_foo: ... with patch('mymodule.Bar') as mock_bar: ... with patch('mymodule.Spam') as mock_spam: ... assert mymodule.Foo is mock_foo ... assert mymodule.Bar is mock_bar ... assert mymodule.Spam is mock_spam ... >>> original = mymodule.Foo >>> MyTest('test_foo').test_foo() >>> assert mymodule.Foo is original With unittest2_ `cleanup` functions and the :ref:`start-and-stop` we can achieve the same effect without the nested indentation. A simple helper method, `create_patch`, puts the patch in place and returns the created mock for us: .. doctest:: >>> class MyTest(TestCase): ... ... def create_patch(self, name): ... patcher = patch(name) ... thing = patcher.start() ... self.addCleanup(patcher.stop) ... return thing ... ... def test_foo(self): ... mock_foo = self.create_patch('mymodule.Foo') ... mock_bar = self.create_patch('mymodule.Bar') ... mock_spam = self.create_patch('mymodule.Spam') ... ... assert mymodule.Foo is mock_foo ... assert mymodule.Bar is mock_bar ... assert mymodule.Spam is mock_spam ... >>> original = mymodule.Foo >>> MyTest('test_foo').run() >>> assert mymodule.Foo is original Mocking a dictionary with MagicMock =================================== You may want to mock a dictionary, or other container object, recording all access to it whilst having it still behave like a dictionary. We can do this with :class:`MagicMock`, which will behave like a dictionary, and using :data:`~Mock.side_effect` to delegate dictionary access to a real underlying dictionary that is under our control. When the `__getitem__` and `__setitem__` methods of our `MagicMock` are called (normal dictionary access) then `side_effect` is called with the key (and in the case of `__setitem__` the value too). We can also control what is returned. After the `MagicMock` has been used we can use attributes like :data:`~Mock.call_args_list` to assert about how the dictionary was used: .. doctest:: >>> my_dict = {'a': 1, 'b': 2, 'c': 3} >>> def getitem(name): ... return my_dict[name] ... >>> def setitem(name, val): ... my_dict[name] = val ... >>> mock = MagicMock() >>> mock.__getitem__.side_effect = getitem >>> mock.__setitem__.side_effect = setitem .. note:: An alternative to using `MagicMock` is to use `Mock` and *only* provide the magic methods you specifically want: .. doctest:: >>> mock = Mock() >>> mock.__setitem__ = Mock(side_effect=getitem) >>> mock.__getitem__ = Mock(side_effect=setitem) A *third* option is to use `MagicMock` but passing in `dict` as the `spec` (or `spec_set`) argument so that the `MagicMock` created only has dictionary magic methods available: .. doctest:: >>> mock = MagicMock(spec_set=dict) >>> mock.__getitem__.side_effect = getitem >>> mock.__setitem__.side_effect = setitem With these side effect functions in place, the `mock` will behave like a normal dictionary but recording the access. It even raises a `KeyError` if you try to access a key that doesn't exist. .. doctest:: >>> mock['a'] 1 >>> mock['c'] 3 >>> mock['d'] Traceback (most recent call last): ... KeyError: 'd' >>> mock['b'] = 'fish' >>> mock['d'] = 'eggs' >>> mock['b'] 'fish' >>> mock['d'] 'eggs' After it has been used you can make assertions about the access using the normal mock methods and attributes: .. doctest:: >>> mock.__getitem__.call_args_list [call('a'), call('c'), call('d'), call('b'), call('d')] >>> mock.__setitem__.call_args_list [call('b', 'fish'), call('d', 'eggs')] >>> my_dict {'a': 1, 'c': 3, 'b': 'fish', 'd': 'eggs'} Mock subclasses and their attributes ==================================== There are various reasons why you might want to subclass `Mock`. One reason might be to add helper methods. Here's a silly example: .. doctest:: >>> class MyMock(MagicMock): ... def has_been_called(self): ... return self.called ... >>> mymock = MyMock(return_value=None) >>> mymock <MyMock id='...'> >>> mymock.has_been_called() False >>> mymock() >>> mymock.has_been_called() True The standard behaviour for `Mock` instances is that attributes and the return value mocks are of the same type as the mock they are accessed on. This ensures that `Mock` attributes are `Mocks` and `MagicMock` attributes are `MagicMocks` [#]_. So if you're subclassing to add helper methods then they'll also be available on the attributes and return value mock of instances of your subclass. .. doctest:: >>> mymock.foo <MyMock name='mock.foo' id='...'> >>> mymock.foo.has_been_called() False >>> mymock.foo() <MyMock name='mock.foo()' id='...'> >>> mymock.foo.has_been_called() True Sometimes this is inconvenient. For example, `one user <https://code.google.com/p/mock/issues/detail?id=105>`_ is subclassing mock to created a `Twisted adaptor <http://twistedmatrix.com/documents/11.0.0/api/twisted.python.components.html>`_. Having this applied to attributes too actually causes errors. `Mock` (in all its flavours) uses a method called `_get_child_mock` to create these "sub-mocks" for attributes and return values. You can prevent your subclass being used for attributes by overriding this method. The signature is that it takes arbitrary keyword arguments (`**kwargs`) which are then passed onto the mock constructor: .. doctest:: >>> class Subclass(MagicMock): ... def _get_child_mock(self, **kwargs): ... return MagicMock(**kwargs) ... >>> mymock = Subclass() >>> mymock.foo <MagicMock name='mock.foo' id='...'> >>> assert isinstance(mymock, Subclass) >>> assert not isinstance(mymock.foo, Subclass) >>> assert not isinstance(mymock(), Subclass) .. [#] An exception to this rule are the non-callable mocks. Attributes use the callable variant because otherwise non-callable mocks couldn't have callable methods. Mocking imports with patch.dict =============================== One situation where mocking can be hard is where you have a local import inside a function. These are harder to mock because they aren't using an object from the module namespace that we can patch out. Generally local imports are to be avoided. They are sometimes done to prevent circular dependencies, for which there is *usually* a much better way to solve the problem (refactor the code) or to prevent "up front costs" by delaying the import. This can also be solved in better ways than an unconditional local import (store the module as a class or module attribute and only do the import on first use). That aside there is a way to use `mock` to affect the results of an import. Importing fetches an *object* from the `sys.modules` dictionary. Note that it fetches an *object*, which need not be a module. Importing a module for the first time results in a module object being put in `sys.modules`, so usually when you import something you get a module back. This need not be the case however. This means you can use :func:`patch.dict` to *temporarily* put a mock in place in `sys.modules`. Any imports whilst this patch is active will fetch the mock. When the patch is complete (the decorated function exits, the with statement body is complete or `patcher.stop()` is called) then whatever was there previously will be restored safely. Here's an example that mocks out the 'fooble' module. .. doctest:: >>> mock = Mock() >>> with patch.dict('sys.modules', {'fooble': mock}): ... import fooble ... fooble.blob() ... <Mock name='mock.blob()' id='...'> >>> assert 'fooble' not in sys.modules >>> mock.blob.assert_called_once_with() As you can see the `import fooble` succeeds, but on exit there is no 'fooble' left in `sys.modules`. This also works for the `from module import name` form: .. doctest:: >>> mock = Mock() >>> with patch.dict('sys.modules', {'fooble': mock}): ... from fooble import blob ... blob.blip() ... <Mock name='mock.blob.blip()' id='...'> >>> mock.blob.blip.assert_called_once_with() With slightly more work you can also mock package imports: .. doctest:: >>> mock = Mock() >>> modules = {'package': mock, 'package.module': mock.module} >>> with patch.dict('sys.modules', modules): ... from package.module import fooble ... fooble() ... <Mock name='mock.module.fooble()' id='...'> >>> mock.module.fooble.assert_called_once_with() Tracking order of calls and less verbose call assertions ======================================================== The :class:`Mock` class allows you to track the *order* of method calls on your mock objects through the :attr:`~Mock.method_calls` attribute. This doesn't allow you to track the order of calls between separate mock objects, however we can use :attr:`~Mock.mock_calls` to achieve the same effect. Because mocks track calls to child mocks in `mock_calls`, and accessing an arbitrary attribute of a mock creates a child mock, we can create our separate mocks from a parent one. Calls to those child mock will then all be recorded, in order, in the `mock_calls` of the parent: .. doctest:: >>> manager = Mock() >>> mock_foo = manager.foo >>> mock_bar = manager.bar >>> mock_foo.something() <Mock name='mock.foo.something()' id='...'> >>> mock_bar.other.thing() <Mock name='mock.bar.other.thing()' id='...'> >>> manager.mock_calls [call.foo.something(), call.bar.other.thing()] We can then assert about the calls, including the order, by comparing with the `mock_calls` attribute on the manager mock: .. doctest:: >>> expected_calls = [call.foo.something(), call.bar.other.thing()] >>> manager.mock_calls == expected_calls True If `patch` is creating, and putting in place, your mocks then you can attach them to a manager mock using the :meth:`~Mock.attach_mock` method. After attaching calls will be recorded in `mock_calls` of the manager. .. doctest:: >>> manager = MagicMock() >>> with patch('mymodule.Class1') as MockClass1: ... with patch('mymodule.Class2') as MockClass2: ... manager.attach_mock(MockClass1, 'MockClass1') ... manager.attach_mock(MockClass2, 'MockClass2') ... MockClass1().foo() ... MockClass2().bar() ... <MagicMock name='mock.MockClass1().foo()' id='...'> <MagicMock name='mock.MockClass2().bar()' id='...'> >>> manager.mock_calls [call.MockClass1(), call.MockClass1().foo(), call.MockClass2(), call.MockClass2().bar()] If many calls have been made, but you're only interested in a particular sequence of them then an alternative is to use the :meth:`~Mock.assert_has_calls` method. This takes a list of calls (constructed with the :data:`call` object). If that sequence of calls are in :attr:`~Mock.mock_calls` then the assert succeeds. .. doctest:: >>> m = MagicMock() >>> m().foo().bar().baz() <MagicMock name='mock().foo().bar().baz()' id='...'> >>> m.one().two().three() <MagicMock name='mock.one().two().three()' id='...'> >>> calls = call.one().two().three().call_list() >>> m.assert_has_calls(calls) Even though the chained call `m.one().two().three()` aren't the only calls that have been made to the mock, the assert still succeeds. Sometimes a mock may have several calls made to it, and you are only interested in asserting about *some* of those calls. You may not even care about the order. In this case you can pass `any_order=True` to `assert_has_calls`: .. doctest:: >>> m = MagicMock() >>> m(1), m.two(2, 3), m.seven(7), m.fifty('50') (...) >>> calls = [call.fifty('50'), call(1), call.seven(7)] >>> m.assert_has_calls(calls, any_order=True) More complex argument matching ============================== Using the same basic concept as `ANY` we can implement matchers to do more complex assertions on objects used as arguments to mocks. Suppose we expect some object to be passed to a mock that by default compares equal based on object identity (which is the Python default for user defined classes). To use :meth:`~Mock.assert_called_with` we would need to pass in the exact same object. If we are only interested in some of the attributes of this object then we can create a matcher that will check these attributes for us. You can see in this example how a 'standard' call to `assert_called_with` isn't sufficient: .. doctest:: >>> class Foo(object): ... def __init__(self, a, b): ... self.a, self.b = a, b ... >>> mock = Mock(return_value=None) >>> mock(Foo(1, 2)) >>> mock.assert_called_with(Foo(1, 2)) Traceback (most recent call last): ... AssertionError: Expected: call(<__main__.Foo object at 0x...>) Actual call: call(<__main__.Foo object at 0x...>) A comparison function for our `Foo` class might look something like this: .. doctest:: >>> def compare(self, other): ... if not type(self) == type(other): ... return False ... if self.a != other.a: ... return False ... if self.b != other.b: ... return False ... return True ... And a matcher object that can use comparison functions like this for its equality operation would look something like this: .. doctest:: >>> class Matcher(object): ... def __init__(self, compare, some_obj): ... self.compare = compare ... self.some_obj = some_obj ... def __eq__(self, other): ... return self.compare(self.some_obj, other) ... Putting all this together: .. doctest:: >>> match_foo = Matcher(compare, Foo(1, 2)) >>> mock.assert_called_with(match_foo) The `Matcher` is instantiated with our compare function and the `Foo` object we want to compare against. In `assert_called_with` the `Matcher` equality method will be called, which compares the object the mock was called with against the one we created our matcher with. If they match then `assert_called_with` passes, and if they don't an `AssertionError` is raised: .. doctest:: >>> match_wrong = Matcher(compare, Foo(3, 4)) >>> mock.assert_called_with(match_wrong) Traceback (most recent call last): ... AssertionError: Expected: ((<Matcher object at 0x...>,), {}) Called with: ((<Foo object at 0x...>,), {}) With a bit of tweaking you could have the comparison function raise the `AssertionError` directly and provide a more useful failure message. As of version 1.5, the Python testing library `PyHamcrest <http://pypi.python.org/pypi/PyHamcrest>`_ provides similar functionality, that may be useful here, in the form of its equality matcher (`hamcrest.library.integration.match_equality <http://packages.python.org/PyHamcrest/integration.html#hamcrest.library.integration.match_equality>`_). Less verbose configuration of mock objects ========================================== This recipe, for easier configuration of mock objects, is now part of `Mock`. See the :meth:`~Mock.configure_mock` method. Matching any argument in assertions =================================== This example is now built in to mock. See :data:`ANY`. Mocking Properties ================== This example is now built in to mock. See :class:`PropertyMock`. Mocking open ============ This example is now built in to mock. See :func:`mock_open`. Mocks without some attributes ============================= This example is now built in to mock. See :ref:`deleting-attributes`.