EVOLUTION-MANAGER

Edit File: NON-AUTOTOOLS-BUILD.txt

Building PCRE2 without using autotools -------------------------------------- This document has been converted from the PCRE1 document. I have removed a number of sections about building in various environments, as they applied only to PCRE1 and are probably out of date. This document contains the following sections: General Generic instructions for the PCRE2 C library Stack size in Windows environments Linking programs in Windows environments Calling conventions in Windows environments Comments about Win32 builds Building PCRE2 on Windows with CMake Testing with RunTest.bat Building PCRE2 on native z/OS and z/VM GENERAL The basic PCRE2 library consists entirely of code written in Standard C, and so should compile successfully on any system that has a Standard C compiler and library. The PCRE2 distribution includes a "configure" file for use by the configure/make (autotools) build system, as found in many Unix-like environments. The README file contains information about the options for "configure". There is also support for CMake, which some users prefer, especially in Windows environments, though it can also be run in Unix-like environments. See the section entitled "Building PCRE2 on Windows with CMake" below. Versions of src/config.h and src/pcre2.h are distributed in the PCRE2 tarballs under the names src/config.h.generic and src/pcre2.h.generic. These are provided for those who build PCRE2 without using "configure" or CMake. If you use "configure" or CMake, the .generic versions are not used. GENERIC INSTRUCTIONS FOR THE PCRE2 C LIBRARY The following are generic instructions for building the PCRE2 C library "by hand". If you are going to use CMake, this section does not apply to you; you can skip ahead to the CMake section. (1) Copy or rename the file src/config.h.generic as src/config.h, and edit the macro settings that it contains to whatever is appropriate for your environment. In particular, you can alter the definition of the NEWLINE macro to specify what character(s) you want to be interpreted as line terminators. When you compile any of the PCRE2 modules, you must specify -DHAVE_CONFIG_H to your compiler so that src/config.h is included in the sources. An alternative approach is not to edit src/config.h, but to use -D on the compiler command line to make any changes that you need to the configuration options. In this case -DHAVE_CONFIG_H must not be set. NOTE: There have been occasions when the way in which certain parameters in src/config.h are used has changed between releases. (In the configure/make world, this is handled automatically.) When upgrading to a new release, you are strongly advised to review src/config.h.generic before re-using what you had previously. (2) Copy or rename the file src/pcre2.h.generic as src/pcre2.h. (3) EITHER: Copy or rename file src/pcre2_chartables.c.dist as src/pcre2_chartables.c. OR: Compile src/dftables.c as a stand-alone program (using -DHAVE_CONFIG_H if you have set up src/config.h), and then run it with the single argument "src/pcre2_chartables.c". This generates a set of standard character tables and writes them to that file. The tables are generated using the default C locale for your system. If you want to use a locale that is specified by LC_xxx environment variables, add the -L option to the dftables command. You must use this method if you are building on a system that uses EBCDIC code. The tables in src/pcre2_chartables.c are defaults. The caller of PCRE2 can specify alternative tables at run time. (4) For an 8-bit library, compile the following source files from the src directory, setting -DPCRE2_CODE_UNIT_WIDTH=8 as a compiler option. Also set -DHAVE_CONFIG_H if you have set up src/config.h with your configuration, or else use other -D settings to change the configuration as required. pcre2_auto_possess.c pcre2_chartables.c pcre2_compile.c pcre2_config.c pcre2_context.c pcre2_dfa_match.c pcre2_error.c pcre2_find_bracket.c pcre2_jit_compile.c pcre2_maketables.c pcre2_match.c pcre2_match_data.c pcre2_newline.c pcre2_ord2utf.c pcre2_pattern_info.c pcre2_serialize.c pcre2_string_utils.c pcre2_study.c pcre2_substitute.c pcre2_substring.c pcre2_tables.c pcre2_ucd.c pcre2_valid_utf.c pcre2_xclass.c Make sure that you include -I. in the compiler command (or equivalent for an unusual compiler) so that all included PCRE2 header files are first sought in the src directory under the current directory. Otherwise you run the risk of picking up a previously-installed file from somewhere else. Note that you must compile pcre2_jit_compile.c, even if you have not defined SUPPORT_JIT in src/config.h, because when JIT support is not configured, dummy functions are compiled. When JIT support IS configured, pcre2_compile.c #includes other files from the sljit subdirectory, where there should be 16 files, all of whose names begin with "sljit". It also #includes src/pcre2_jit_match.c and src/pcre2_jit_misc.c, so you should not compile these yourself. (5) Now link all the compiled code into an object library in whichever form your system keeps such libraries. This is the basic PCRE2 C 8-bit library. If your system has static and shared libraries, you may have to do this once for each type. (6) If you want to build a 16-bit library or 32-bit library (as well as, or instead of the 8-bit library) just supply 16 or 32 as the value of -DPCRE2_CODE_UNIT_WIDTH when you are compiling. (7) If you want to build the POSIX wrapper functions (which apply only to the 8-bit library), ensure that you have the src/pcre2posix.h file and then compile src/pcre2posix.c. Link the result (on its own) as the pcre2posix library. (8) The pcre2test program can be linked with any combination of the 8-bit, 16-bit and 32-bit libraries (depending on what you selected in src/config.h). Compile src/pcre2test.c; don't forget -DHAVE_CONFIG_H if necessary, but do NOT define PCRE2_CODE_UNIT_WIDTH. Then link with the appropriate library/ies. If you compiled an 8-bit library, pcre2test also needs the pcre2posix wrapper library. (9) Run pcre2test on the testinput files in the testdata directory, and check that the output matches the corresponding testoutput files. There are comments about what each test does in the section entitled "Testing PCRE2" in the README file. If you compiled more than one of the 8-bit, 16-bit and 32-bit libraries, you need to run pcre2test with the -16 option to do 16-bit tests and with the -32 option to do 32-bit tests. Some tests are relevant only when certain build-time options are selected. For example, test 4 is for Unicode support, and will not run if you have built PCRE2 without it. See the comments at the start of each testinput file. If you have a suitable Unix-like shell, the RunTest script will run the appropriate tests for you. The command "RunTest list" will output a list of all the tests. Note that the supplied files are in Unix format, with just LF characters as line terminators. You may need to edit them to change this if your system uses a different convention. (10) If you have built PCRE2 with SUPPORT_JIT, the JIT features can be tested by running pcre2test with the -jit option. This is done automatically by the RunTest script. You might also like to build and run the freestanding JIT test program, src/pcre2_jit_test.c. (11) If you want to use the pcre2grep command, compile and link src/pcre2grep.c; it uses only the basic 8-bit PCRE2 library (it does not need the pcre2posix library). If you have built the PCRE2 library with JIT support by defining SUPPORT_JIT in src/config.h, you can also define SUPPORT_PCRE2GREP_JIT, which causes pcre2grep to make use of JIT (unless it is run with --no-jit). If you define SUPPORT_PCRE2GREP_JIT without defining SUPPORT_JIT, pcre2grep does not try to make use of JIT. STACK SIZE IN WINDOWS ENVIRONMENTS The default processor stack size of 1Mb in some Windows environments is too small for matching patterns that need much recursion. In particular, test 2 may fail because of this. Normally, running out of stack causes a crash, but there have been cases where the test program has just died silently. See your linker documentation for how to increase stack size if you experience problems. If you are using CMake (see "BUILDING PCRE2 ON WINDOWS WITH CMAKE" below) and the gcc compiler, you can increase the stack size for pcre2test and pcre2grep by setting the CMAKE_EXE_LINKER_FLAGS variable to "-Wl,--stack,8388608" (for example). The Linux default of 8Mb is a reasonable choice for the stack, though even that can be too small for some pattern/subject combinations. PCRE2 has a compile configuration option to disable the use of stack for recursion so that heap is used instead. However, pattern matching is significantly slower when this is done. There is more about stack usage in the "pcre2stack" documentation. LINKING PROGRAMS IN WINDOWS ENVIRONMENTS If you want to statically link a program against a PCRE2 library in the form of a non-dll .a file, you must define PCRE2_STATIC before including src/pcre2.h. CALLING CONVENTIONS IN WINDOWS ENVIRONMENTS It is possible to compile programs to use different calling conventions using MSVC. Search the web for "calling conventions" for more information. To make it easier to change the calling convention for the exported functions in the PCRE2 library, the macro PCRE2_CALL_CONVENTION is present in all the external definitions. It can be set externally when compiling (e.g. in CFLAGS). If it is not set, it defaults to empty; the default calling convention is then used (which is what is wanted most of the time). COMMENTS ABOUT WIN32 BUILDS (see also "BUILDING PCRE2 ON WINDOWS WITH CMAKE") There are two ways of building PCRE2 using the "configure, make, make install" paradigm on Windows systems: using MinGW or using Cygwin. These are not at all the same thing; they are completely different from each other. There is also support for building using CMake, which some users find a more straightforward way of building PCRE2 under Windows. The MinGW home page (http://www.mingw.org/) says this: MinGW: A collection of freely available and freely distributable Windows specific header files and import libraries combined with GNU toolsets that allow one to produce native Windows programs that do not rely on any 3rd-party C runtime DLLs. The Cygwin home page (http://www.cygwin.com/) says this: Cygwin is a Linux-like environment for Windows. It consists of two parts: . A DLL (cygwin1.dll) which acts as a Linux API emulation layer providing substantial Linux API functionality . A collection of tools which provide Linux look and feel. On both MinGW and Cygwin, PCRE2 should build correctly using: ./configure && make && make install This should create two libraries called libpcre2-8 and libpcre2-posix. These are independent libraries: when you link with libpcre2-posix you must also link with libpcre2-8, which contains the basic functions. Using Cygwin's compiler generates libraries and executables that depend on cygwin1.dll. If a library that is generated this way is distributed, cygwin1.dll has to be distributed as well. Since cygwin1.dll is under the GPL licence, this forces not only PCRE2 to be under the GPL, but also the entire application. A distributor who wants to keep their own code proprietary must purchase an appropriate Cygwin licence. MinGW has no such restrictions. The MinGW compiler generates a library or executable that can run standalone on Windows without any third party dll or licensing issues. But there is more complication: If a Cygwin user uses the -mno-cygwin Cygwin gcc flag, what that really does is to tell Cygwin's gcc to use the MinGW gcc. Cygwin's gcc is only acting as a front end to MinGW's gcc (if you install Cygwin's gcc, you get both Cygwin's gcc and MinGW's gcc). So, a user can: . Build native binaries by using MinGW or by getting Cygwin and using -mno-cygwin. . Build binaries that depend on cygwin1.dll by using Cygwin with the normal compiler flags. The test files that are supplied with PCRE2 are in UNIX format, with LF characters as line terminators. Unless your PCRE2 library uses a default newline option that includes LF as a valid newline, it may be necessary to change the line terminators in the test files to get some of the tests to work. BUILDING PCRE2 ON WINDOWS WITH CMAKE CMake is an alternative configuration facility that can be used instead of "configure". CMake creates project files (make files, solution files, etc.) tailored to numerous development environments, including Visual Studio, Borland, Msys, MinGW, NMake, and Unix. If possible, use short paths with no spaces in the names for your CMake installation and your PCRE2 source and build directories. The following instructions were contributed by a PCRE1 user, but they should also work for PCRE2. If they are not followed exactly, errors may occur. In the event that errors do occur, it is recommended that you delete the CMake cache before attempting to repeat the CMake build process. In the CMake GUI, the cache can be deleted by selecting "File > Delete Cache". 1. Install the latest CMake version available from http://www.cmake.org/, and ensure that cmake\bin is on your path. 2. Unzip (retaining folder structure) the PCRE2 source tree into a source directory such as C:\pcre2. You should ensure your local date and time is not earlier than the file dates in your source dir if the release is very new. 3. Create a new, empty build directory, preferably a subdirectory of the source dir. For example, C:\pcre2\pcre2-xx\build. 4. Run cmake-gui from the Shell envirornment of your build tool, for example, Msys for Msys/MinGW or Visual Studio Command Prompt for VC/VC++. Do not try to start Cmake from the Windows Start menu, as this can lead to errors. 5. Enter C:\pcre2\pcre2-xx and C:\pcre2\pcre2-xx\build for the source and build directories, respectively. 6. Hit the "Configure" button. 7. Select the particular IDE / build tool that you are using (Visual Studio, MSYS makefiles, MinGW makefiles, etc.) 8. The GUI will then list several configuration options. This is where you can disable Unicode support or select other PCRE2 optional features. 9. Hit "Configure" again. The adjacent "Generate" button should now be active. 10. Hit "Generate". 11. The build directory should now contain a usable build system, be it a solution file for Visual Studio, makefiles for MinGW, etc. Exit from cmake-gui and use the generated build system with your compiler or IDE. E.g., for MinGW you can run "make", or for Visual Studio, open the PCRE2 solution, select the desired configuration (Debug, or Release, etc.) and build the ALL_BUILD project. 12. If during configuration with cmake-gui you've elected to build the test programs, you can execute them by building the test project. E.g., for MinGW: "make test"; for Visual Studio build the RUN_TESTS project. The most recent build configuration is targeted by the tests. A summary of test results is presented. Complete test output is subsequently available for review in Testing\Temporary under your build dir. TESTING WITH RUNTEST.BAT If configured with CMake, building the test project ("make test" or building ALL_TESTS in Visual Studio) creates (and runs) pcre2_test.bat (and depending on your configuration options, possibly other test programs) in the build directory. The pcre2_test.bat script runs RunTest.bat with correct source and exe paths. For manual testing with RunTest.bat, provided the build dir is a subdirectory of the source directory: Open command shell window. Chdir to the location of your pcre2test.exe and pcre2grep.exe programs. Call RunTest.bat with "..\RunTest.Bat" or "..\..\RunTest.bat" as appropriate. To run only a particular test with RunTest.Bat provide a test number argument. Otherwise: 1. Copy RunTest.bat into the directory where pcre2test.exe and pcre2grep.exe have been created. 2. Edit RunTest.bat to indentify the full or relative location of the pcre2 source (wherein which the testdata folder resides), e.g.: set srcdir=C:\pcre2\pcre2-10.00 3. In a Windows command environment, chdir to the location of your bat and exe programs. 4. Run RunTest.bat. Test outputs will automatically be compared to expected results, and discrepancies will be identified in the console output. To independently test the just-in-time compiler, run pcre2_jit_test.exe. BUILDING PCRE2 ON NATIVE Z/OS AND Z/VM z/OS and z/VM are operating systems for mainframe computers, produced by IBM. The character code used is EBCDIC, not ASCII or Unicode. In z/OS, UNIX APIs and applications can be supported through UNIX System Services, and in such an environment PCRE2 can be built in the same way as in other systems. However, in native z/OS (without UNIX System Services) and in z/VM, special ports are required. For details, please see this web site: http://www.zaconsultants.net The site currently has ports for PCRE1 releases, but PCRE2 should follow in due course. You may also download PCRE1 from WWW.CBTTAPE.ORG, file 882. Everything, source and executable, is in EBCDIC and native z/OS file formats and this is the recommended download site. ============================= Last Updated: 13 October 2016