EVOLUTION-MANAGER

Edit File: AuthDatabase.CheckPassword.txt

CheckPassword ============= Checkpassword is an authentication interface originally implemented by qmail [http://www.qmail.org/]. Checkpassword combines both the <password database> [PasswordDatabase.txt] and <user database> [UserDatabase.txt] lookups into a single checkpassword lookup, which makes the standard implementation unsuitable for a standalone userdb. With Dovecot extensions it's also possible to use checkpassword as a userdb. Typically you'll use <prefetch> [UserDatabase.Prefetch.txt] as the userdb, but it's not required that you use the checkpassword script's userdb capabilities. You can still use for example <static userdb> [UserDatabase.Static.txt] if you're using only a single UID and GID, and your home directory fits into a template. Security -------- The standard checkpassword design is incompatible with Dovecot's security model. If the system has local users and the checkpassword script setuid()s into a local user, the user is able to ptrace into the communication and change the authentication results. This is of course undesirable, so v2.2.7+ will just refuse to run in such environments by default. The possibilities to solve this are: 1. If possible, change the checkpassword to return 'userdb_uid' and 'userdb_gid' extra fields instead of using 'setuid()' and 'setgid()'. This also improves the performance. 2. If you can't change the script, you can make Dovecot's 'checkpassword-reply' binary setuid or setgid (e.g.'chgrp dovecot /usr/local/libexec/dovecot/checkpassword-reply; chmod g+s /usr/local/libexec/dovecot/checkpassword-reply') 3. If you don't have any untrusted local users and you just don't care about this check, you can set 'INSECURE_SETUID=1' environment e.g. with a wrapper checkpassword script. Deliver ------- If your checkpassword script doesn't support Dovecot extensions, you can't use it as a user database. This means that if you wish to use <LDA.txt>, you can't use the '-d' parameter to do userdb lookups. There are two ways to solve this: 1. Use another userdb which does the lookup for deliver, for example <SQL> [AuthDatabase.SQL.txt] or <static> [UserDatabase.Static.txt]. Add this userdb after the prefetch userdb. 2. Use a script to look up the user's home directory and run deliver without '-d' parameter. For example: ---%<------------------------------------------------------------------------- #!/bin/sh # <<Lookup user's home directory here.>> # If users have different UIDs/GIDs, make sure to also change this process's UID and GID. # If you want to override any settings, use dovecot-lda's -o parameter # (e.g. dovecot-lda -o mail_location=maildir:~/Maildir). export HOME exec /usr/local/libexec/dovecot/dovecot-lda ---%<------------------------------------------------------------------------- Checkpassword Interface ----------------------- The interface is specified in http://cr.yp.to/checkpwd/interface.html. However here's a quick tutorial for writing a script: * Read '<username> NUL <password> NUL' from fd 3. * Verify the username and password. * If the authentication fails, exit with code 1. This makes Dovecot give "Authentication failed" error to user. * This error is returned both for password mismatch and also if the user doesn't exist at all. Internally Dovecot maps this as password mismatch. * If you encounter an internal error, exit with code 111. This makes Dovecot give "Temporary authentication failure" error to user. * If the authentication succeeds, you'll need to: * Set user's home directory to '$HOME' environment. This isn't required, <but highly encouraged> [VirtualUsers.txt]. * Set '$USER' environment variable. If the user name was changed (eg. if you lowercased "Username" to "username"), you can tell about it to Dovecot by setting '$USER' to the changed user name. * Return the user's <UNIX UID and GID> [UserIds.txt] using 'userdb_uid' and 'userdb_gid' environments and add them to the 'EXTRA' environment (see below for Dovecot extensions). * This is recommended over actually changing the UID/GID using setuid()/setgid() as specified by the standard checkpassword interface, because it's <incompatible with Dovecot's security model> [AuthDatabase.CheckPassword.txt]. * Your program received a path to 'checkpassword-reply' binary as the first parameter. Execute it. Qmail-LDAP ---------- Note that auth_imap that comes with qmail-ldap is not compatible with this interface. You can get a patch that adds auth_dovecot functionality to qmail-ldap here [http://japc.uncovering.org/dovecot/qmail-ldap-1.03-20060201-dovecot.patch]. Or you can use auth_pop instead, but you may need to pass /aliasempty/ to let auth_pop find the Maildir, so it is recommended to write a /var/qmail/bin/auth_dovecot wrapper (don't forget to chmod +x it) around auth_pop. ---%<------------------------------------------------------------------------- #!/bin/sh QMAIL="/var/qmail" if [ -e $QMAIL/control/defaultdelivery ]; then ALIASEMPTY=`head -n 1 $QMAIL/control/defaultdelivery 2> /dev/null` else ALIASEMPTY=`head -n 1 $QMAIL/control/aliasempty 2> /dev/null` fi ALIASEMPTY=${ALIASEMPTY:-"./Maildir/"} exec $QMAIL/bin/auth_pop "$@" $ALIASEMPTY ---%<------------------------------------------------------------------------- you can also use this wrapper to pass LOGLEVEL environmental variable to auth_pop. Dovecot Extensions ------------------ If you wish to return <extra fields> [PasswordDatabase.ExtraFields.txt] for Dovecot, set them in environment variables and then list them in EXTRA environment variable. The <userdb extra fields> [UserDatabase.ExtraFields.txt] can be returned by prefixing them with 'userdb_'. For example: ---%<------------------------------------------------------------------------- userdb_quota_rule=*:storage=10000 userdb_mail=mbox:$HOME/mboxes EXTRA=userdb_quota_rule userdb_mail ---%<------------------------------------------------------------------------- Dovecot also sets some environment variables that the script may use: * 'SERVICE': contains eg. imap, pop3 or smtp * 'TCPLOCALIP' and 'TCPREMOTEIP': Client socket's IP addresses if available * 'MASTER_USER': If master login is attempted. This means that the password contains the master user's password and the normal username contains the user who master wants to log in as. * 'AUTH_*': All of the <auth variables> [Variables.txt] are available as 'AUTH_<long name>' extra fields. For example '%{cert}' is in 'AUTH_CERT'. (v2.0.16+) Checkpassword as userdb ----------------------- Dovecot calls the script with 'AUTHORIZED=1' environment set when performing a userdb lookup. The script must acknowledge this by changing the environment to 'AUTHORIZED=2', otherwise the lookup fails. Other than that, the script works the same way as a passdb checkpassword script. If user doesn't exist, use exit code 3. Checkpassword with passdb lookups (v2.1.2+) ------------------------------------------- Normally checkpassword answers to questions "is user X's password Y?" This doesn't work with non-plaintext auth mechanisms, or when Dovecot wants to do a non-authenticating passdb lookup (e.g. for LMTP proxy). These passdb credentials lookups can be implemented the same way as a userdb lookup (i.e. change the 'AUTHORIZED' environment). * 'AUTHORIZED=1' is set, just like for userdb lookup * When doing a non-plaintext authentication: * 'CREDENTIALS_LOOKUP=1' environment is set * The password scheme that Dovecot wants is available in 'SCHEME' environment (e.g.'SCHEME=CRAM-MD5') * If a password is returned, it must be returned as 'password={SCHEME}secret'. * When doing a passdb lookup, e.g. a proxy which doesn't really want the password, just the passdb extra fields: * Neither 'CREDENTIALS_LOOKUP' nor 'SCHEME' is set. * FIXME: Unfortunately it looks like you currently can't easily differentiate a passdb lookup from userdb lookup! * If user doesn't exist, use exit code 3. * If you get an error about checkpassword exiting with code 0, you didn't execute the 'checkpassword-reply' binary as you should have (which exits with code 2 on success) Example ------- The standard way: ---%<------------------------------------------------------------------------- passdb { driver = checkpassword args = /usr/bin/checkpassword } userdb { driver = prefetch } # If you want to use deliver -d and your users are in SQL: userdb { driver = sql args = /etc/dovecot/dovecot-sql.conf.ext } ---%<------------------------------------------------------------------------- Using checkpassword only to verify the password: ---%<------------------------------------------------------------------------- passdb { driver = checkpassword args = /usr/bin/checkpassword } userdb { driver = static args = uid=vmail gid=vmail home=/home/%u } ---%<------------------------------------------------------------------------- Performance ----------- The <CheckPassword.txt> backend is not suited for heavy traffic. Especially if the script spawned have to launch an entire language interpreter. If your user database is only accessible with custom code an alternative might be using the <Dict AuthDatabase over a UNIX socket> [AuthDatabase.Dict.txt]. Specific checkpassword implementations -------------------------------------- * phpBB dovecot checkpassword authentication, written in python: https://github.com/ser/checkpassword-phpbb (This file was created from the wiki on 2018-05-23 04:42)