EVOLUTION-MANAGER

Edit File: rfc2243.txt

Network Working Group                                           C. Metz
Request for Comments: 2243                                The Inner Net
Category: Standards Track                                 November 1997

OTP Extended Responses

Status of this Memo

This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Abstract

This document provides a specification for a type of response to an
   OTP [RFC 1938] challenge that carries explicit indication of the
   response's encoding. Codings for the two mandatory OTP data formats
   using this new type of response are presented.

This document also provides a specification for a response that
   allows an OTP generator to request that a server re-initialize a
   sequence and change parameters such as the secret pass phrase.

1. Conventions, Terms, and Notation

This document specifies the data formats and software behaviors
   needed to use OTP extended responses. The data formats are described
   three ways: using an ad-hoc UNIX manual page style syntax, using
   augmented BNF described in sections two and three of RFC 822, and by
   examples. Should there be any conflict between these descriptions,
   the augmented BNF takes precedence. The software behaviors are
   described in words, and specific behavior compliance requirements are
   itemized using the requirements terminology (specifically, the words
   MUST, SHOULD, and MAY) defined in RFC 2119.

Metz                        Standards Track                     [Page 1]

RFC 2243                 OTP Extended Responses            November 1997

2. Extended Challenges and Extended Responses

This document builds on the protocol and terminology specified in RFC
   1938 and assumes that you have already read this document and
   understand its contents.

An extended challenge is a single line of printable text terminated
   by either a new line sequence appropriate for the context of its use
   (e.g., ASCII CR followed by ASCII LF) or a whitespace character. It
   contains a standard OTP challenge, a whitespace character, and a list
   that generators use to determine which extended responses are
   supported by a server.

An extended response is a single line of printable text terminated by
   a new line sequence appropriate for the context of its use. It
   contains two or more tokens that are separated with a single colon
   (':') character. The first token contains a type specifier that
   indicates the format of the rest of the response. The tokens that
   follow are argument data for the OTP extended response. At least one
   token of data MUST be present.

2.1. Syntax

In UNIX manual page like syntax, the general form of an extended
   challenge could be described as:

<standard OTP challenge> ext[,<extension set id>[, ...]]

And the general form of an extended response could be described as:

<type-specifier>:<arg1>[:<arg2>[:...]]

In augmented BNF syntax, the syntax of the general form of an
   extended challenge and an extended response is:

extended-challenge = otp-challenge 1*LWSP-char capability-list
                        (NL / *LWSP-char)
   otp-challenge     = <a standard OTP challenge>
   capability-list   = "ext" *("," extension-set-id)
   extension-set-id  = *<any CHAR except LWSP, CTLs, or ",">
   extended-response = type 1*(":" argument) NL
   type              = token
   argument          = token
   token             = 1*<any CHAR except ":" and CTLs>
   NL                = <new line sequence appropriate for the context
                        in which OTP is being used>

Metz                        Standards Track                     [Page 2]

RFC 2243                 OTP Extended Responses            November 1997

An example of an extended challenge indicating support for OTP
   extended responses and for a mythical response set "foo" is:

otp-md5 123 mi1234 ext,foo

An example of an extended response using a mythical type named "foo"
   is:

foo:some data:some more data:12345

2.2. Requirements

A server compliant with this specification:

1. MUST be able to receive and parse the general form of an
         extended response
      2. MUST be able to receive, parse, and correctly process all
         extended responses specified in this document
      3. MUST process the type field in a case-insensitive manner
      4. MUST reject any authentication attempt using an extended
         response if it does not support that type of response
      5. SHOULD provide an appropriate indication to the generator
         if the response was rejected because of (4)
      6. MUST limit the length of the input reasonably
      7. MUST accept otherwise arbitrary amounts of whitespace
         wherever a response allows it
      8. MUST be able to receive and correctly process standard OTP
         responses

A generator compliant with this specification:

1. MUST be able to generate standard OTP responses
      2. MUST use standard responses unless an extended challenge
         has been received for the particular server AND seed
      3. MUST generate the type field in lower case
      4. MUST NOT send a response type for which the server has not
         indicated support through an extended challenge

Extension set identifiers and extension type identifiers named with
   the prefix "x-" are reserved for private use among mutually
   consenting implementations. Implementations that do not recognise a
   particular "x-" extension MUST ignore that extension. This means that
   all "x-" extensions are likely to be non-interoperable with other
   extensions. Careful consideration should be given to the possibility
   of a server interacting with with a generator implementation which,
   although it recognizes a given "x-" extension, uses it for a
   different purpose. All of the remaining extension namespace is
   reserved to IANA, which will only officially assign the extension

Metz                        Standards Track                     [Page 3]

RFC 2243                 OTP Extended Responses            November 1997

into this namespace after the IESG approves of such an assignment.
   During the lifetime of the OTP WG, it is recommended that the IESG
   consult with the OTP WG prior to approving such an assignment.

3. The "hex" and "word" Responses

There exists a very rare case in which a standard OTP response could
   be a valid coding in both the hexadecimal and six-word formats. An
   example of this is the response "ABE ACE ADA ADD BAD A."  The
   solution to this problem mandated by the OTP specification is that
   compliant servers MUST attempt to parse and verify a standard
   response in both hexadecimal and six-word formats and must consider
   the authentication successful if either succeeds.

This problem can be solved easily using extended responses. The "hex"
   response and the "word" response are two response types that encode
   an OTP in an extended response that explicitly describes the
   encoding. These responses start with a type label of "hex" for a
   hexadecimal OTP and "word" for a six-word coded OTP. These responses
   contain one argument field that contains a standard OTP response
   coded in the indicated format.

3.1. Syntax

In UNIX manual page like syntax, the format of these responses could
   be described as:

hex:<hexadecimal number>
      word:<six dictionary words>

In augmented BNF syntax and with the definitions already provided,
   the syntax of these responses is:

hex-response  = "hex:" hex-64bit NL
      hex-64bit     = 16(hex-char *LWSP-char)
      hex-char      = ("A" / "B" / "C" / "D" / "E" / "F" /
                       "a" / "b" / "c" / "d" / "e" / "f" /
                       "0" / "1" / "2" / "3" / "4" / "5" /
                       "6" / "7" / "8" / "9")

word-response = "word:" word-64bit NL
      word-64bit    = 6(otp-word 1*LWSP-char)
      otp-word      = <any valid word in the standard OTP coding
                      dictionary>

Metz                        Standards Track                     [Page 4]

RFC 2243                 OTP Extended Responses            November 1997

Examples of these responses are:

hex:8720 33d4 6202 9172
      word:VAST SAUL TAKE SODA SUCH BOLT

3.2. Requirements

A server compliant with this specification:

1. MUST process all arguments in a case-insensitive manner

A generator compliant with this specification:

1. SHOULD generate otp-word tokens in upper case with single
         spaces separating them
      2. SHOULD generate hexadecimal numbers using only lower case
         for letters

4. The "init-hex" and "init-word" Responses

The OTP specification requires that implementations provide a means
   for a client to re-initialize or change its OTP information with a
   server but does not require any specific protocol for doing it.
   Implementations that support the OTP extended responses described in
   this document MUST support the response with the "init-hex" and
   "init-word" type specifiers, which provide a standard way for a
   client to re-initialize its OTP information with a server. This
   response is intended to be used only by automated clients. Because of
   this, the recommended form of this response uses the hexadecimal
   encoding for binary data. It is possible for a user to type an "init-
   hex" or "init-word" response.

4.1. Syntax

In UNIX manual page like syntax, the format of these responses could
   be described as:

init-hex:<current-OTP>:<new-params>:<new-OTP>
      init-word:<current-OTP>:<new-params>:<new-OTP>

In augmented BNF syntax and with the definitions already provided,
   the syntax of the "init-hex" response is:

init-hex-response = "init-hex:" current-OTP ":" new-params ":"
                        new-OTP NL

current-OTP     = hex-64bit
   new-OTP         = hex-64bit

Metz                        Standards Track                     [Page 5]

RFC 2243                 OTP Extended Responses            November 1997

new-params      = algorithm SPACE sequence-number SPACE seed
   algorithm       = "md4" / "md5" / "sha1"
   sequence-number = 4*3DIGIT
   seed            = 16*1(ALPHA / DIGIT)

In augmented BNF syntax and with the definitions already provided,
   the syntax of the "init-word" response is:

init-word-response = "init-word:" current-OTP ":" new-params ":"
                        new-OTP NL

current-OTP     = word-64bit
   new-OTP         = word-64bit

new-params      = algorithm SPACE sequence-number SPACE seed
   algorithm       = "md4" / "md5" / "sha1"
   sequence-number = 4*3DIGIT
   seed            = 16*1(ALPHA / DIGIT)

Note that all appropriate fields for the "init-hex" response MUST be
   hexadecimally coded and that all appropriate fields for the "init-
   word" response MUST be six-word coded.

Examples of these responses are:

init-hex:f6bd 6b33 89b8 7203:md5 499 ke6118:23d1 b253 5ae0 2b7e
   init-hex:c9b2 12bb 6425 5a0f:md5 499 ke0986:fd17 cef1 b4df 093e

init-word:MOOD SOFT POP COMB BOLO LIFE:md5 499 ke1235:
   ARTY WEAR TAD RUG HALO GIVE
   init-word:END KERN BALM NICK EROS WAVY:md5 499 ke1235:
   BABY FAIN OILY NIL TIDY DADE

(Note that all of these responses are one line. Due to their length,
   they had to be split into multiple lines in order to be included
   here. These responses MUST NOT span more than one line in actual use)

4.2. Description of Fields

The current-OTP field contains the (RFC 1938) response to the OTP
   challenge.  The new-params field contains the parameters for the
   client's new requested challenge and the new-OTP field contains a
   response to that challenge. If the re-initialization is successful, a
   server MUST store the new OTP in its database as the last successful
   OTP received and the sequence number in the next challenge presented
   by the server MUST be one less than the sequence number specified in
   the new-params field.

Metz                        Standards Track                     [Page 6]

RFC 2243                 OTP Extended Responses            November 1997

The new-params field is hashed as a string the same way that a seed
   or secret pass phrase would be. All other field values are hashed in
   their uncoded binary forms, in network byte order and without any
   padding.

4.3. Requirements

A server compliant with this specification:

1. SHOULD NOT allow a user to use the same value for their
         seed and secret pass phrase.
      2. MUST disable all OTP access to any principal whose
         sequence number would be less than one
      3. MUST decrement the sequence number if a reinitialization
         response includes a valid current-OTP, but the server is
         unable to successfully process the new-params or new-OTP for
         any reason.

A generator compliant with this specification:

1. SHOULD NOT allow a user to use the same value for their
         seed and secret pass phrase
      2. MUST take specific steps to prevent infinite loops of
         re-initialization attempts in case of failure
      3. SHOULD provide the user with some indication that the
         re-initialization is taking place
      4. SHOULD NOT do a re-initialization without the user's
         permission, either for that specific instance or as a
         configuration option
      5. SHOULD NOT retry a failed re-initialization without a user's
         permission
      6. SHOULD warn the user if the sequence number falls below ten
      7. MUST refuse to generate OTPs with a sequence number below one

5. Security Considerations

All of the security considerations for the OTP system also apply to
   the OTP system with extended responses.

These extended responses, like OTP itself, do not protect the user
   against active attacks. The IPsec Authentication Header (RFC-1826)
   (or another technique with at least as much strength as IPsec AH)
   SHOULD be used to protect against such attacks.

The consequences of a successful active attack on the re-
   initialization response may be more severe than simply hijacking a
   single session. An attacker could substitute his own response for

Metz                        Standards Track                     [Page 7]

RFC 2243                 OTP Extended Responses            November 1997

that of a legitimate user. The attacker may then be able to use the
   OTP system to authenticate himself as the user at will (at least
   until detected).

Failure to implement server requirement 3 in section 4.3 opens an
   implementation to an attack based on replay of the current-OTP part
   of the response.

6. Acknowledgments

Like RFC 1938, the protocol described in this document was created by
   contributors in the IETF OTP working group. Specific contributions
   were made by Neil Haller, who provided input on the overall design
   requirements of a re-initialization protocol, Denis Pinkas, who
   suggested several modifications to the originally proposed re-
   initialization protocol, and Phil Servita, who opened the debate with
   the first real protocol proposal and provided lots of specific input
   on the design of this and earlier protocols. The extensions to the
   OTP challenge were suggested by Chris Newman and John Valdes.

Randall Atkinson and Ted T'so also contributed their views to
   discussions about details of the protocol extensions in this
   document.

References

[RFC 822]   Crocker, D., "Standard for the Format of ARPA Internet
               Text Messages," RFC 822, August 1982.

[RFC 1825]  Atkinson, R., "Security Architecture for the Internet
               Protocol," RFC 1825, August 1995.

[RFC 1938]  Haller, N. and C. Metz, "A One-Time Password System,"
               RFC 1938, May 1996.

[RFC 2119]  Bradner, S., "Key words for use in RFCs to
               Indicate Requirement Level," RFC 2119,
               March 1997.

Author's Address

Craig Metz
   The Inner Net
   Box 10314-1936
   Blacksburg, VA 24062-0314
   (DSN) 354-8590
   cmetz@inner.net

Metz                        Standards Track                     [Page 8]

RFC 2243                 OTP Extended Responses            November 1997

Appendix: Reference Responses

The following responses were generated by a development version of
   the One-Time Passwords in Everything (OPIE) implementation of this
   specification.

All of these are responses to the challenge:

otp-md5 499 ke1234 ext

Note that the re-initialization responses use the same secret pass
   phrase for new and current and a new seed of "ke1235". Also, these
   responses have been split for formatting purposes into multiple
   lines; they MUST NOT be multiple lines in actual use.

The secret pass phrase for these responses is:

This is a test.

The OTP standard hexadecimal response is:

5bf0 75d9 959d 036f

The OTP standard six-word response is:

BOND FOGY DRAB NE RISE MART

The OTP extended "hex" response is:

hex:5Bf0 75d9 959d 036f

The OTP extended "word" response is:

word:BOND FOGY DRAB NE RISE MART

The OTP extended "init-hex" response is:

init-hex:5bf0 75d9 959d 036f:md5 499 ke1235:3712 dcb4 aa53 16c1

The OTP extended "init-word" response is:

init-word:BOND FOGY DRAB NE RISE MART:md5 499 ke1235:  RED HERD
        NOW BEAN PA BURG

Metz                        Standards Track                     [Page 9]

RFC 2243                 OTP Extended Responses            November 1997

Full Copyright Statement

This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Metz                        Standards Track                    [Page 10]