EVOLUTION-MANAGER

Edit File: ExternalData.cmake

# - Manage data files stored outside source tree
# Use this module to unambiguously reference data files stored outside the
# source tree and fetch them at build time from arbitrary local and remote
# content-addressed locations.  Functions provided by this module recognize
# arguments with the syntax "DATA{<name>}" as references to external data,
# replace them with full paths to local copies of those data, and create build
# rules to fetch and update the local copies.
#
# The DATA{} syntax is literal and the <name> is a full or relative path
# within the source tree.  The source tree must contain either a real data
# file at <name> or a "content link" at <name><ext> containing a hash of the
# real file using a hash algorithm corresponding to <ext>.  For example, the
# argument "DATA{img.png}" may be satisfied by either a real "img.png" file in
# the current source directory or a "img.png.md5" file containing its MD5 sum.
#
# The 'ExternalData_Expand_Arguments' function evaluates DATA{} references
# in its arguments and constructs a new list of arguments:
#  ExternalData_Expand_Arguments(
#    <target>   # Name of data management target
#    <outVar>   # Output variable
#    [args...]  # Input arguments, DATA{} allowed
#    )
# It replaces each DATA{} reference in an argument with the full path of a
# real data file on disk that will exist after the <target> builds.
#
# The 'ExternalData_Add_Test' function wraps around the CMake add_test()
# command but supports DATA{} references in its arguments:
#  ExternalData_Add_Test(
#    <target>   # Name of data management target
#    ...        # Arguments of add_test(), DATA{} allowed
#    )
# It passes its arguments through ExternalData_Expand_Arguments and then
# invokes add_test() using the results.
#
# The 'ExternalData_Add_Target' function creates a custom target to manage
# local instances of data files stored externally:
#  ExternalData_Add_Target(
#    <target>   # Name of data management target
#    )
# It creates custom commands in the target as necessary to make data files
# available for each DATA{} reference previously evaluated by other functions
# provided by this module.  A list of URL templates must be provided in the
# variable ExternalData_URL_TEMPLATES using the placeholders "%(algo)" and
# "%(hash)" in each template.  Data fetch rules try each URL template in order
# by substituting the hash algorithm name for "%(algo)" and the hash value for
# "%(hash)".
#
# The following hash algorithms are supported:
#    %(algo)     <ext>     Description
#    -------     -----     -----------
#    MD5         .md5      Message-Digest Algorithm 5, RFC 1321
#    SHA1        .sha1     US Secure Hash Algorithm 1, RFC 3174
#    SHA224      .sha224   US Secure Hash Algorithms, RFC 4634
#    SHA256      .sha256   US Secure Hash Algorithms, RFC 4634
#    SHA384      .sha384   US Secure Hash Algorithms, RFC 4634
#    SHA512      .sha512   US Secure Hash Algorithms, RFC 4634
# Note that the hashes are used only for unique data identification and
# download verification.  This is not security software.
#
# Example usage:
#   include(ExternalData)
#   set(ExternalData_URL_TEMPLATES "file:///local/%(algo)/%(hash)"
#                                  "http://data.org/%(algo)/%(hash)")
#   ExternalData_Add_Test(MyData
#     NAME MyTest
#     COMMAND MyExe DATA{MyInput.png}
#     )
#   ExternalData_Add_Target(MyData)
# When test "MyTest" runs the "DATA{MyInput.png}" argument will be replaced by
# the full path to a real instance of the data file "MyInput.png" on disk.  If
# the source tree contains a content link such as "MyInput.png.md5" then the
# "MyData" target creates a real "MyInput.png" in the build tree.
#
# The DATA{} syntax can be told to fetch a file series using the form
# "DATA{<name>,:}", where the ":" is literal.  If the source tree contains a
# group of files or content links named like a series then a reference to one
# member adds rules to fetch all of them.  Although all members of a series
# are fetched, only the file originally named by the DATA{} argument is
# substituted for it.  The default configuration recognizes file series names
# ending with "#.ext", "_#.ext", ".#.ext", or "-#.ext" where "#" is a sequence
# of decimal digits and ".ext" is any single extension.  Configure it with a
# regex that parses <number> and <suffix> parts from the end of <name>:
#  ExternalData_SERIES_PARSE = regex of the form (<number>)(<suffix>)$
# For more complicated cases set:
#  ExternalData_SERIES_PARSE = regex with at least two () groups
#  ExternalData_SERIES_PARSE_PREFIX = <prefix> regex group number, if any
#  ExternalData_SERIES_PARSE_NUMBER = <number> regex group number
#  ExternalData_SERIES_PARSE_SUFFIX = <suffix> regex group number
# Configure series number matching with a regex that matches the
# <number> part of series members named <prefix><number><suffix>:
#  ExternalData_SERIES_MATCH = regex matching <number> in all series members
# Note that the <suffix> of a series does not include a hash-algorithm
# extension.
#
# The DATA{} syntax can alternatively match files associated with the named
# file and contained in the same directory.  Associated files may be specified
# by options using the syntax DATA{<name>,<opt1>,<opt2>,...}.  Each option may
# specify one file by name or specify a regular expression to match file names
# using the syntax REGEX:<regex>.  For example, the arguments
#   DATA{MyData/MyInput.mhd,MyInput.img}                   # File pair
#   DATA{MyData/MyFrames00.png,REGEX:MyFrames[0-9]+\\.png} # Series
# will pass MyInput.mha and MyFrames00.png on the command line but ensure
# that the associated files are present next to them.
#
# The DATA{} syntax may reference a directory using a trailing slash and a
# list of associated files.  The form DATA{<name>/,<opt1>,<opt2>,...} adds
# rules to fetch any files in the directory that match one of the associated
# file options.  For example, the argument DATA{MyDataDir/,REGEX:.*} will pass
# the full path to a MyDataDir directory on the command line and ensure that
# the directory contains files corresponding to every file or content link in
# the MyDataDir source directory.
#
# The variable ExternalData_LINK_CONTENT may be set to the name of a supported
# hash algorithm to enable automatic conversion of real data files referenced
# by the DATA{} syntax into content links.  For each such <file> a content
# link named "<file><ext>" is created.  The original file is renamed to the
# form ".ExternalData_<algo>_<hash>" to stage it for future transmission to
# one of the locations in the list of URL templates (by means outside the
# scope of this module).  The data fetch rule created for the content link
# will use the staged object if it cannot be found using any URL template.
#
# The variable ExternalData_OBJECT_STORES may be set to a list of local
# directories that store objects using the layout <dir>/%(algo)/%(hash).
# These directories will be searched first for a needed object.  If the object
# is not available in any store then it will be fetched remotely using the URL
# templates and added to the first local store listed.  If no stores are
# specified the default is a location inside the build tree.
#
# The variable ExternalData_SOURCE_ROOT may be set to the highest source
# directory containing any path named by a DATA{} reference.  The default is
# CMAKE_SOURCE_DIR.  ExternalData_SOURCE_ROOT and CMAKE_SOURCE_DIR must refer
# to directories within a single source distribution (e.g. they come together
# in one tarball).
#
# The variable ExternalData_BINARY_ROOT may be set to the directory to hold
# the real data files named by expanded DATA{} references.  The default is
# CMAKE_BINARY_DIR.  The directory layout will mirror that of content links
# under ExternalData_SOURCE_ROOT.
#
# Variables ExternalData_TIMEOUT_INACTIVITY and ExternalData_TIMEOUT_ABSOLUTE
# set the download inactivity and absolute timeouts, in seconds.  The defaults
# are 60 seconds and 300 seconds, respectively.  Set either timeout to 0
# seconds to disable enforcement.

#=============================================================================
# Copyright 2010-2013 Kitware, Inc.
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
# (To distribute this file outside of CMake, substitute the full
#  License text for the above reference.)

function(ExternalData_add_test target)
  # Expand all arguments as a single string to preserve escaped semicolons.
  ExternalData_expand_arguments("${target}" testArgs "${ARGN}")
  add_test(${testArgs})
endfunction()

function(ExternalData_add_target target)
  if(NOT ExternalData_URL_TEMPLATES)
    message(FATAL_ERROR "ExternalData_URL_TEMPLATES is not set!")
  endif()
  if(NOT ExternalData_OBJECT_STORES)
    set(ExternalData_OBJECT_STORES ${CMAKE_BINARY_DIR}/ExternalData/Objects)
  endif()
  set(config ${CMAKE_CURRENT_BINARY_DIR}/${target}_config.cmake)
  configure_file(${_ExternalData_SELF_DIR}/ExternalData_config.cmake.in ${config} @ONLY)

set(files "")

# Set "_ExternalData_FILE_${file}" for each output file to avoid duplicate
  # rules.  Use local data first to prefer real files over content links.

# Custom commands to copy or link local data.
  get_property(data_local GLOBAL PROPERTY _ExternalData_${target}_LOCAL)
  foreach(entry IN LISTS data_local)
    string(REPLACE "|" ";" tuple "${entry}")
    list(GET tuple 0 file)
    list(GET tuple 1 name)
    if(NOT DEFINED "_ExternalData_FILE_${file}")
      set("_ExternalData_FILE_${file}" 1)
      add_custom_command(
        COMMENT "Generating ${file}"
        OUTPUT "${file}"
        COMMAND ${CMAKE_COMMAND} -Drelative_top=${CMAKE_BINARY_DIR}
                                 -Dfile=${file} -Dname=${name}
                                 -DExternalData_ACTION=local
                                 -DExternalData_CONFIG=${config}
                                 -P ${_ExternalData_SELF}
        MAIN_DEPENDENCY "${name}"
        )
      list(APPEND files "${file}")
    endif()
  endforeach()

# Custom commands to fetch remote data.
  get_property(data_fetch GLOBAL PROPERTY _ExternalData_${target}_FETCH)
  foreach(entry IN LISTS data_fetch)
    string(REPLACE "|" ";" tuple "${entry}")
    list(GET tuple 0 file)
    list(GET tuple 1 name)
    list(GET tuple 2 ext)
    set(stamp "${ext}-stamp")
    if(NOT DEFINED "_ExternalData_FILE_${file}")
      set("_ExternalData_FILE_${file}" 1)
      add_custom_command(
        # Users care about the data file, so hide the hash/timestamp file.
        COMMENT "Generating ${file}"
        # The hash/timestamp file is the output from the build perspective.
        # List the real file as a second output in case it is a broken link.
        # The files must be listed in this order so CMake can hide from the
        # make tool that a symlink target may not be newer than the input.
        OUTPUT "${file}${stamp}" "${file}"
        # Run the data fetch/update script.
        COMMAND ${CMAKE_COMMAND} -Drelative_top=${CMAKE_BINARY_DIR}
                                 -Dfile=${file} -Dname=${name} -Dext=${ext}
                                 -DExternalData_ACTION=fetch
                                 -DExternalData_CONFIG=${config}
                                 -P ${_ExternalData_SELF}
        # Update whenever the object hash changes.
        MAIN_DEPENDENCY "${name}${ext}"
        )
      list(APPEND files "${file}${stamp}")
    endif()
  endforeach()

# Custom target to drive all update commands.
  add_custom_target(${target} ALL DEPENDS ${files})
endfunction()

function(ExternalData_expand_arguments target outArgsVar)
  # Replace DATA{} references with real arguments.
  set(data_regex "DATA{([^;{}\r\n]*)}")
  set(other_regex "([^D]|D[^A]|DA[^T]|DAT[^A]|DATA[^{])+|.")
  set(outArgs "")
  # This list expansion un-escapes semicolons in list element values so we
  # must re-escape them below anywhere a new list expansion will occur.
  foreach(arg IN LISTS ARGN)
    if("x${arg}" MATCHES "${data_regex}")
      # Re-escape in-value semicolons before expansion in foreach below.
      string(REPLACE ";" "\\;" tmp "${arg}")
      # Split argument into DATA{}-pieces and other pieces.
      string(REGEX MATCHALL "${data_regex}|${other_regex}" pieces "${tmp}")
      # Compose output argument with DATA{}-pieces replaced.
      set(outArg "")
      foreach(piece IN LISTS pieces)
        if("x${piece}" MATCHES "^x${data_regex}$")
          # Replace this DATA{}-piece with a file path.
          string(REGEX REPLACE "${data_regex}" "\\1" data "${piece}")
          _ExternalData_arg("${target}" "${piece}" "${data}" file)
          set(outArg "${outArg}${file}")
        else()
          # No replacement needed for this piece.
          set(outArg "${outArg}${piece}")
        endif()
      endforeach()
    else()
      # No replacements needed in this argument.
      set(outArg "${arg}")
    endif()
    # Re-escape in-value semicolons in resulting list.
    string(REPLACE ";" "\\;" outArg "${outArg}")
    list(APPEND outArgs "${outArg}")
  endforeach()
  set("${outArgsVar}" "${outArgs}" PARENT_SCOPE)
endfunction()

#-----------------------------------------------------------------------------
# Private helper interface

set(_ExternalData_REGEX_ALGO "MD5|SHA1|SHA224|SHA256|SHA384|SHA512")
set(_ExternalData_REGEX_EXT "md5|sha1|sha224|sha256|sha384|sha512")
set(_ExternalData_SELF "${CMAKE_CURRENT_LIST_FILE}")
get_filename_component(_ExternalData_SELF_DIR "${_ExternalData_SELF}" PATH)

function(_ExternalData_compute_hash var_hash algo file)
  if("${algo}" MATCHES "^${_ExternalData_REGEX_ALGO}$")
    file("${algo}" "${file}" hash)
    set("${var_hash}" "${hash}" PARENT_SCOPE)
  else()
    message(FATAL_ERROR "Hash algorithm ${algo} unimplemented.")
  endif()
endfunction()

function(_ExternalData_random var)
  string(RANDOM LENGTH 6 random)
  set("${var}" "${random}" PARENT_SCOPE)
endfunction()

function(_ExternalData_exact_regex regex_var string)
  string(REGEX REPLACE "([][+.*()^])" "\\\\\\1" regex "${string}")
  set("${regex_var}" "${regex}" PARENT_SCOPE)
endfunction()

function(_ExternalData_atomic_write file content)
  _ExternalData_random(random)
  set(tmp "${file}.tmp${random}")
  file(WRITE "${tmp}" "${content}")
  file(RENAME "${tmp}" "${file}")
endfunction()

function(_ExternalData_link_content name var_ext)
  if("${ExternalData_LINK_CONTENT}" MATCHES "^(${_ExternalData_REGEX_ALGO})$")
    set(algo "${ExternalData_LINK_CONTENT}")
  else()
    message(FATAL_ERROR
      "Unknown hash algorithm specified by ExternalData_LINK_CONTENT:\n"
      "  ${ExternalData_LINK_CONTENT}")
  endif()
  _ExternalData_compute_hash(hash "${algo}" "${name}")
  get_filename_component(dir "${name}" PATH)
  set(staged "${dir}/.ExternalData_${algo}_${hash}")
  string(TOLOWER ".${algo}" ext)
  _ExternalData_atomic_write("${name}${ext}" "${hash}\n")
  file(RENAME "${name}" "${staged}")
  set("${var_ext}" "${ext}" PARENT_SCOPE)

file(RELATIVE_PATH relname "${ExternalData_SOURCE_ROOT}" "${name}${ext}")
  message(STATUS "Linked ${relname} to ExternalData ${algo}/${hash}")
endfunction()

function(_ExternalData_arg target arg options var_file)
  # Separate data path from the options.
  string(REPLACE "," ";" options "${options}")
  list(GET options 0 data)
  list(REMOVE_AT options 0)

# Interpret trailing slashes as directories.
  set(data_is_directory 0)
  if("x${data}" MATCHES "^x(.*)([/\\])$")
    set(data_is_directory 1)
    set(data "${CMAKE_MATCH_1}")
  endif()

# Convert to full path.
  if(IS_ABSOLUTE "${data}")
    set(absdata "${data}")
  else()
    set(absdata "${CMAKE_CURRENT_SOURCE_DIR}/${data}")
  endif()
  get_filename_component(absdata "${absdata}" ABSOLUTE)

# Convert to relative path under the source tree.
  if(NOT ExternalData_SOURCE_ROOT)
    set(ExternalData_SOURCE_ROOT "${CMAKE_SOURCE_DIR}")
  endif()
  set(top_src "${ExternalData_SOURCE_ROOT}")
  file(RELATIVE_PATH reldata "${top_src}" "${absdata}")
  if(IS_ABSOLUTE "${reldata}" OR "${reldata}" MATCHES "^\\.\\./")
    message(FATAL_ERROR "Data file referenced by argument\n"
      "  ${arg}\n"
      "does not lie under the top-level source directory\n"
      "  ${top_src}\n")
  endif()
  if(data_is_directory AND NOT IS_DIRECTORY "${top_src}/${reldata}")
    message(FATAL_ERROR "Data directory referenced by argument\n"
      "  ${arg}\n"
      "corresponds to source tree path\n"
      "  ${reldata}\n"
      "that does not exist as a directory!")
  endif()
  if(NOT ExternalData_BINARY_ROOT)
    set(ExternalData_BINARY_ROOT "${CMAKE_BINARY_DIR}")
  endif()
  set(top_bin "${ExternalData_BINARY_ROOT}")

# Handle in-source builds gracefully.
  if("${top_src}" STREQUAL "${top_bin}")
    if(ExternalData_LINK_CONTENT)
      message(WARNING "ExternalData_LINK_CONTENT cannot be used in-source")
      set(ExternalData_LINK_CONTENT 0)
    endif()
    set(top_same 1)
  endif()

set(external "") # Entries external to the source tree.
  set(internal "") # Entries internal to the source tree.
  set(have_original ${data_is_directory})

# Process options.
  set(series_option "")
  set(associated_files "")
  set(associated_regex "")
  foreach(opt ${options})
    if("x${opt}" MATCHES "^xREGEX:[^:/]+$")
      # Regular expression to match associated files.
      string(REGEX REPLACE "^REGEX:" "" regex "${opt}")
      list(APPEND associated_regex "${regex}")
    elseif(opt STREQUAL ":")
      # Activate series matching.
      set(series_option "${opt}")
    elseif("x${opt}" MATCHES "^[^][:/*?]+$")
      # Specific associated file.
      list(APPEND associated_files "${opt}")
    else()
      message(FATAL_ERROR "Unknown option \"${opt}\" in argument\n"
        "  ${arg}\n")
    endif()
  endforeach()

if(series_option)
    if(data_is_directory)
      message(FATAL_ERROR "Series option \"${series_option}\" not allowed with directories.")
    endif()
    if(associated_files OR associated_regex)
      message(FATAL_ERROR "Series option \"${series_option}\" not allowed with associated files.")
    endif()
    # Load a whole file series.
    _ExternalData_arg_series()
  elseif(data_is_directory)
    if(associated_files OR associated_regex)
      # Load listed/matching associated files in the directory.
      _ExternalData_arg_associated()
    else()
      message(FATAL_ERROR "Data directory referenced by argument\n"
        "  ${arg}\n"
        "must list associated files.")
    endif()
  else()
    # Load the named data file.
    _ExternalData_arg_single()
    if(associated_files OR associated_regex)
      # Load listed/matching associated files.
      _ExternalData_arg_associated()
    endif()
  endif()

if(NOT have_original)
    message(FATAL_ERROR "Data file referenced by argument\n"
      "  ${arg}\n"
      "corresponds to source tree path\n"
      "  ${reldata}\n"
      "that does not exist as a file (with or without an extension)!")
  endif()

if(external)
    # Make the series available in the build tree.
    set_property(GLOBAL APPEND PROPERTY
      _ExternalData_${target}_FETCH "${external}")
    set_property(GLOBAL APPEND PROPERTY
      _ExternalData_${target}_LOCAL "${internal}")
    set("${var_file}" "${top_bin}/${reldata}" PARENT_SCOPE)
  else()
    # The whole series is in the source tree.
    set("${var_file}" "${top_src}/${reldata}" PARENT_SCOPE)
  endif()
endfunction()

macro(_ExternalData_arg_associated)
  # Associated files lie in the same directory.
  if(data_is_directory)
    set(reldir "${reldata}")
  else()
    get_filename_component(reldir "${reldata}" PATH)
  endif()
  if(reldir)
    set(reldir "${reldir}/")
  endif()
  _ExternalData_exact_regex(reldir_regex "${reldir}")

# Find files named explicitly.
  foreach(file ${associated_files})
    _ExternalData_exact_regex(file_regex "${file}")
    _ExternalData_arg_find_files("${reldir}${file}" "${reldir_regex}${file_regex}")
  endforeach()

# Find files matching the given regular expressions.
  set(all "")
  set(sep "")
  foreach(regex ${associated_regex})
    set(all "${all}${sep}${reldir_regex}${regex}")
    set(sep "|")
  endforeach()
  _ExternalData_arg_find_files("${reldir}" "${all}")
endmacro()

macro(_ExternalData_arg_single)
  # Match only the named data by itself.
  _ExternalData_exact_regex(data_regex "${reldata}")
  _ExternalData_arg_find_files("${reldata}" "${data_regex}")
endmacro()

macro(_ExternalData_arg_series)
  # Configure series parsing and matching.
  set(series_parse_prefix "")
  set(series_parse_number "\\1")
  set(series_parse_suffix "\\2")
  if(ExternalData_SERIES_PARSE)
    if(ExternalData_SERIES_PARSE_NUMBER AND ExternalData_SERIES_PARSE_SUFFIX)
      if(ExternalData_SERIES_PARSE_PREFIX)
        set(series_parse_prefix "\\${ExternalData_SERIES_PARSE_PREFIX}")
      endif()
      set(series_parse_number "\\${ExternalData_SERIES_PARSE_NUMBER}")
      set(series_parse_suffix "\\${ExternalData_SERIES_PARSE_SUFFIX}")
    elseif(NOT "x${ExternalData_SERIES_PARSE}" MATCHES "^x\$[^()]*\$\$[^()]*\$\\$$")
      message(FATAL_ERROR
        "ExternalData_SERIES_PARSE is set to\n"
        "  ${ExternalData_SERIES_PARSE}\n"
        "which is not of the form\n"
        "  (<number>)(<suffix>)$\n"
        "Fix the regular expression or set variables\n"
        "  ExternalData_SERIES_PARSE_PREFIX = <prefix> regex group number, if any\n"
        "  ExternalData_SERIES_PARSE_NUMBER = <number> regex group number\n"
        "  ExternalData_SERIES_PARSE_SUFFIX = <suffix> regex group number\n"
        )
    endif()
    set(series_parse "${ExternalData_SERIES_PARSE}")
  else()
    set(series_parse "([0-9]*)(\\.[^./]*)$")
  endif()
  if(ExternalData_SERIES_MATCH)
    set(series_match "${ExternalData_SERIES_MATCH}")
  else()
    set(series_match "[_.-]?[0-9]*")
  endif()

# Parse the base, number, and extension components of the series.
  string(REGEX REPLACE "${series_parse}" "${series_parse_prefix};${series_parse_number};${series_parse_suffix}" tuple "${reldata}")
  list(LENGTH tuple len)
  if(NOT "${len}" EQUAL 3)
    message(FATAL_ERROR "Data file referenced by argument\n"
      "  ${arg}\n"
      "corresponds to path\n"
      "  ${reldata}\n"
      "that does not match regular expression\n"
      "  ${series_parse}")
  endif()
  list(GET tuple 0 relbase)
  list(GET tuple 2 ext)

# Glob files that might match the series.
  # Then match base, number, and extension.
  _ExternalData_exact_regex(series_base "${relbase}")
  _ExternalData_exact_regex(series_ext "${ext}")
  _ExternalData_arg_find_files("${relbase}*${ext}"
    "${series_base}${series_match}${series_ext}")
endmacro()

function(_ExternalData_arg_find_files pattern regex)
  file(GLOB globbed RELATIVE "${top_src}" "${top_src}/${pattern}*")
  foreach(entry IN LISTS globbed)
    if("x${entry}" MATCHES "^x(.*)(\\.(${_ExternalData_REGEX_EXT}))$")
      set(relname "${CMAKE_MATCH_1}")
      set(alg "${CMAKE_MATCH_2}")
    else()
      set(relname "${entry}")
      set(alg "")
    endif()
    if("x${relname}" MATCHES "^x${regex}$" # matches
        AND NOT IS_DIRECTORY "${top_src}/${entry}" # not a directory
        AND NOT "x${relname}" MATCHES "(^x|/)\\.ExternalData_" # not staged obj
        )
      set(name "${top_src}/${relname}")
      set(file "${top_bin}/${relname}")
      if(alg)
        list(APPEND external "${file}|${name}|${alg}")
      elseif(ExternalData_LINK_CONTENT)
        _ExternalData_link_content("${name}" alg)
        list(APPEND external "${file}|${name}|${alg}")
      elseif(NOT top_same)
        list(APPEND internal "${file}|${name}")
      endif()
      if("${relname}" STREQUAL "${reldata}")
        set(have_original 1)
      endif()
    endif()
  endforeach()
  set(external "${external}" PARENT_SCOPE)
  set(internal "${internal}" PARENT_SCOPE)
  set(have_original "${have_original}" PARENT_SCOPE)
endfunction()

#-----------------------------------------------------------------------------
# Private script mode interface

if(CMAKE_GENERATOR OR NOT ExternalData_ACTION)
  return()
endif()

if(ExternalData_CONFIG)
  include(${ExternalData_CONFIG})
endif()
if(NOT ExternalData_URL_TEMPLATES)
  message(FATAL_ERROR "No ExternalData_URL_TEMPLATES set!")
endif()

function(_ExternalData_link_or_copy src dst)
  # Create a temporary file first.
  get_filename_component(dst_dir "${dst}" PATH)
  file(MAKE_DIRECTORY "${dst_dir}")
  _ExternalData_random(random)
  set(tmp "${dst}.tmp${random}")
  if(UNIX)
    # Create a symbolic link.
    set(tgt "${src}")
    if(relative_top)
      # Use relative path if files are close enough.
      file(RELATIVE_PATH relsrc "${relative_top}" "${src}")
      file(RELATIVE_PATH relfile "${relative_top}" "${dst}")
      if(NOT IS_ABSOLUTE "${relsrc}" AND NOT "${relsrc}" MATCHES "^\\.\\./" AND
          NOT IS_ABSOLUTE "${reldst}" AND NOT "${reldst}" MATCHES "^\\.\\./")
        file(RELATIVE_PATH tgt "${dst_dir}" "${src}")
      endif()
    endif()
    execute_process(COMMAND "${CMAKE_COMMAND}" -E create_symlink "${tgt}" "${tmp}" RESULT_VARIABLE result)
  else()
    # Create a copy.
    execute_process(COMMAND "${CMAKE_COMMAND}" -E copy "${src}" "${tmp}" RESULT_VARIABLE result)
  endif()
  if(result)
    file(REMOVE "${tmp}")
    message(FATAL_ERROR "Failed to create\n  ${tmp}\nfrom\n  ${obj}")
  endif()

# Atomically create/replace the real destination.
  file(RENAME "${tmp}" "${dst}")
endfunction()

function(_ExternalData_download_file url file err_var msg_var)
  set(retry 3)
  while(retry)
    math(EXPR retry "${retry} - 1")
    if(ExternalData_TIMEOUT_INACTIVITY)
      set(inactivity_timeout INACTIVITY_TIMEOUT ${ExternalData_TIMEOUT_INACTIVITY})
    elseif(NOT "${ExternalData_TIMEOUT_INACTIVITY}" EQUAL 0)
      set(inactivity_timeout INACTIVITY_TIMEOUT 60)
    else()
      set(inactivity_timeout "")
    endif()
    if(ExternalData_TIMEOUT_ABSOLUTE)
      set(absolute_timeout TIMEOUT ${ExternalData_TIMEOUT_ABSOLUTE})
    elseif(NOT "${ExternalData_TIMEOUT_ABSOLUTE}" EQUAL 0)
      set(absolute_timeout TIMEOUT 300)
    else()
      set(absolute_timeout "")
    endif()
    file(DOWNLOAD "${url}" "${file}" STATUS status LOG log ${inactivity_timeout} ${absolute_timeout} SHOW_PROGRESS)
    list(GET status 0 err)
    list(GET status 1 msg)
    if(err)
      if("${msg}" MATCHES "HTTP response code said error" AND
          "${log}" MATCHES "error: 503")
        set(msg "temporarily unavailable")
      endif()
    elseif("${log}" MATCHES "\nHTTP[^\n]* 503")
      set(err TRUE)
      set(msg "temporarily unavailable")
    endif()
    if(NOT err OR NOT "${msg}" MATCHES "partial|timeout|temporarily")
      break()
    elseif(retry)
      message(STATUS "[download terminated: ${msg}, retries left: ${retry}]")
    endif()
  endwhile()
  set("${err_var}" "${err}" PARENT_SCOPE)
  set("${msg_var}" "${msg}" PARENT_SCOPE)
endfunction()

function(_ExternalData_download_object name hash algo var_obj)
  # Search all object stores for an existing object.
  foreach(dir ${ExternalData_OBJECT_STORES})
    set(obj "${dir}/${algo}/${hash}")
    if(EXISTS "${obj}")
      message(STATUS "Found object: \"${obj}\"")
      set("${var_obj}" "${obj}" PARENT_SCOPE)
      return()
    endif()
  endforeach()

# Download object to the first store.
  list(GET ExternalData_OBJECT_STORES 0 store)
  set(obj "${store}/${algo}/${hash}")

_ExternalData_random(random)
  set(tmp "${obj}.tmp${random}")
  set(found 0)
  set(tried "")
  foreach(url_template IN LISTS ExternalData_URL_TEMPLATES)
    string(REPLACE "%(hash)" "${hash}" url_tmp "${url_template}")
    string(REPLACE "%(algo)" "${algo}" url "${url_tmp}")
    message(STATUS "Fetching \"${url}\"")
    _ExternalData_download_file("${url}" "${tmp}" err errMsg)
    set(tried "${tried}\n  ${url}")
    if(err)
      set(tried "${tried} (${errMsg})")
    else()
      # Verify downloaded object.
      _ExternalData_compute_hash(dl_hash "${algo}" "${tmp}")
      if("${dl_hash}" STREQUAL "${hash}")
        set(found 1)
        break()
      else()
        set(tried "${tried} (wrong hash ${algo}=${dl_hash})")
        if("$ENV{ExternalData_DEBUG_DOWNLOAD}" MATCHES ".")
          file(RENAME "${tmp}" "${store}/${algo}/${dl_hash}")
        endif()
      endif()
    endif()
    file(REMOVE "${tmp}")
  endforeach()

get_filename_component(dir "${name}" PATH)
  set(staged "${dir}/.ExternalData_${algo}_${hash}")

if(found)
    file(RENAME "${tmp}" "${obj}")
    message(STATUS "Downloaded object: \"${obj}\"")
  elseif(EXISTS "${staged}")
    set(obj "${staged}")
    message(STATUS "Staged object: \"${obj}\"")
  else()
    message(FATAL_ERROR "Object ${algo}=${hash} not found at:${tried}")
  endif()

set("${var_obj}" "${obj}" PARENT_SCOPE)
endfunction()

if("${ExternalData_ACTION}" STREQUAL "fetch")
  foreach(v ExternalData_OBJECT_STORES file name ext)
    if(NOT DEFINED "${v}")
      message(FATAL_ERROR "No \"-D${v}=\" value provided!")
    endif()
  endforeach()

file(READ "${name}${ext}" hash)
  string(STRIP "${hash}" hash)

if("${ext}" MATCHES "^\\.(${_ExternalData_REGEX_EXT})$")
    string(TOUPPER "${CMAKE_MATCH_1}" algo)
  else()
    message(FATAL_ERROR "Unknown hash algorithm extension \"${ext}\"")
  endif()

_ExternalData_download_object("${name}" "${hash}" "${algo}" obj)

# Check if file already corresponds to the object.
  set(stamp "${ext}-stamp")
  set(file_up_to_date 0)
  if(EXISTS "${file}" AND EXISTS "${file}${stamp}")
    file(READ "${file}${stamp}" f_hash)
    string(STRIP "${f_hash}" f_hash)
    if("${f_hash}" STREQUAL "${hash}")
      #message(STATUS "File already corresponds to object")
      set(file_up_to_date 1)
    endif()
  endif()

if(file_up_to_date)
    # Touch the file to convince the build system it is up to date.
    execute_process(COMMAND "${CMAKE_COMMAND}" -E touch "${file}")
  else()
    _ExternalData_link_or_copy("${obj}" "${file}")
  endif()

# Atomically update the hash/timestamp file to record the object referenced.
  _ExternalData_atomic_write("${file}${stamp}" "${hash}\n")
elseif("${ExternalData_ACTION}" STREQUAL "local")
  foreach(v file name)
    if(NOT DEFINED "${v}")
      message(FATAL_ERROR "No \"-D${v}=\" value provided!")
    endif()
  endforeach()
  _ExternalData_link_or_copy("${name}" "${file}")
else()
  message(FATAL_ERROR "Unknown ExternalData_ACTION=[${ExternalData_ACTION}]")
endif()