EVOLUTION-MANAGER

Edit File: CPackComponent.cmake

##section Variables concerning CPack Components
##end
##module
# - Build binary and source package installers
#
# The CPackComponent module is the module which handles
# the component part of CPack. See CPack module for
# general information about CPack.
#
# For certain kinds of binary installers (including the graphical
# installers on Mac OS X and Windows), CPack generates installers that
# allow users to select individual application components to
# install. The contents of each of the components are identified by
# the COMPONENT argument of CMake's INSTALL command. These components
# can be annotated with user-friendly names and descriptions,
# inter-component dependencies, etc., and grouped in various ways to
# customize the resulting installer. See the cpack_add_* commands,
# described below, for more information about component-specific
# installations.
#
# Component-specific installation allows users to select specific sets
# of components to install during the install process. Installation
# components are identified by the COMPONENT argument of CMake's
# INSTALL commands, and should be further described by the following
# CPack commands:
##end
#
##variable
#  CPACK_COMPONENTS_ALL - The list of component to install.
#
#The default value of this variable is computed by CPack
#and contains all components defined by the project. The
#user may set it to only include the specified components.
##end
#
##variable
#  CPACK_<GENNAME>_COMPONENT_INSTALL - Enable/Disable component install for
#  CPack generator <GENNAME>.
#
#Each CPack Generator (RPM, DEB, ARCHIVE, NSIS, DMG, etc...) has a legacy
#default behavior. e.g. RPM builds monolithic whereas NSIS builds component.
#One can change the default behavior by setting this variable to 0/1 or OFF/ON.
##end
##variable
#  CPACK_COMPONENTS_GROUPING - Specify how components are grouped for multi-package
#  component-aware CPack generators.
#
#Some generators like RPM or ARCHIVE family (TGZ, ZIP, ...) generates several
#packages files when asked for component packaging. They group the component
#differently depending on the value of this variable:
#  - ONE_PER_GROUP (default): creates one package file per component group
#  - ALL_COMPONENTS_IN_ONE : creates a single package with all (requested) component
#  - IGNORE : creates one package per component, i.e. IGNORE component group
#One can specify different grouping for different CPack generator by using
#a CPACK_PROJECT_CONFIG_FILE.
##end
##variable
#  CPACK_COMPONENT_<compName>_DISPLAY_NAME - The name to be displayed for a component.
##end
##variable
#  CPACK_COMPONENT_<compName>_DESCRIPTION - The description of a component.
##end
##variable
#  CPACK_COMPONENT_<compName>_GROUP - The group of a component.
##end
##variable
#  CPACK_COMPONENT_<compName>_DEPENDS - The dependencies (list of components)
#  on which this component depends.
##end
##variable
#  CPACK_COMPONENT_<compName>_REQUIRED - True is this component is required.
##end
##macro
#cpack_add_component - Describes a CPack installation component
#named by the COMPONENT argument to a CMake INSTALL command.
#
#  cpack_add_component(compname
#                      [DISPLAY_NAME name]
#                      [DESCRIPTION description]
#                      [HIDDEN | REQUIRED | DISABLED ]
#                      [GROUP group]
#                      [DEPENDS comp1 comp2 ... ]
#                      [INSTALL_TYPES type1 type2 ... ]
#                      [DOWNLOADED]
#                      [ARCHIVE_FILE filename])
#
#The cmake_add_component command describes an installation
#component, which the user can opt to install or remove as part of
#the graphical installation process. compname is the name of the
#component, as provided to the COMPONENT argument of one or more
#CMake INSTALL commands.
#
#DISPLAY_NAME is the displayed name of the component, used in
#graphical installers to display the component name. This value can
#be any string.
#
#DESCRIPTION is an extended description of the component, used in
#graphical installers to give the user additional information about
#the component. Descriptions can span multiple lines using "\n" as
#the line separator. Typically, these descriptions should be no
#more than a few lines long.
#
#HIDDEN indicates that this component will be hidden in the
#graphical installer, so that the user cannot directly change
#whether it is installed or not.
#
#REQUIRED indicates that this component is required, and therefore
#will always be installed. It will be visible in the graphical
#installer, but it cannot be unselected. (Typically, required
#components are shown greyed out).
#
#DISABLED indicates that this component should be disabled
#(unselected) by default. The user is free to select this component
#for installation, unless it is also HIDDEN.
#
#DEPENDS lists the components on which this component depends. If
#this component is selected, then each of the components listed
#must also be selected. The dependency information is encoded
#within the installer itself, so that users cannot install
#inconsistent sets of components.
#
#GROUP names the component group of which this component is a
#part. If not provided, the component will be a standalone
#component, not part of any component group. Component groups are
#described with the cpack_add_component_group command, detailed
#below.
#
#INSTALL_TYPES lists the installation types of which this component
#is a part. When one of these installations types is selected, this
#component will automatically be selected. Installation types are
#described with the cpack_add_install_type command, detailed below.
#
#DOWNLOADED indicates that this component should be downloaded
#on-the-fly by the installer, rather than packaged in with the
#installer itself. For more information, see the cpack_configure_downloads
# command.
#
#ARCHIVE_FILE provides a name for the archive file created by CPack
#to be used for downloaded components. If not supplied, CPack will
#create a file with some name based on CPACK_PACKAGE_FILE_NAME and
#the name of the component. See cpack_configure_downloads for more
#information.
##end
#
##macro
#cpack_add_component_group - Describes a group of related CPack
#installation components.
#
#  cpack_add_component_group(groupname
#                           [DISPLAY_NAME name]
#                           [DESCRIPTION description]
#                           [PARENT_GROUP parent]
#                           [EXPANDED]
#                           [BOLD_TITLE])
#
#The cpack_add_component_group describes a group of installation
#components, which will be placed together within the listing of
#options. Typically, component groups allow the user to
#select/deselect all of the components within a single group via a
#single group-level option. Use component groups to reduce the
#complexity of installers with many options. groupname is an
#arbitrary name used to identify the group in the GROUP argument of
#the cpack_add_component command, which is used to place a
#component in a group. The name of the group must not conflict with
#the name of any component.
#
#DISPLAY_NAME is the displayed name of the component group, used in
#graphical installers to display the component group name. This
#value can be any string.
#
#DESCRIPTION is an extended description of the component group,
#used in graphical installers to give the user additional
#information about the components within that group. Descriptions
#can span multiple lines using "\n" as the line
#separator. Typically, these descriptions should be no more than a
#few lines long.
#
#PARENT_GROUP, if supplied, names the parent group of this group.
#Parent groups are used to establish a hierarchy of groups,
#providing an arbitrary hierarchy of groups.
#
#EXPANDED indicates that, by default, the group should show up as
#"expanded", so that the user immediately sees all of the
#components within the group. Otherwise, the group will initially
#show up as a single entry.
#
#BOLD_TITLE indicates that the group title should appear in bold,
#to call the user's attention to the group.
##end
#
##macro
#cpack_add_install_type - Add a new installation type containing a
#set of predefined component selections to the graphical installer.
#
#  cpack_add_install_type(typename
#                         [DISPLAY_NAME name])
#
#The cpack_add_install_type command identifies a set of preselected
#components that represents a common use case for an
#application. For example, a "Developer" install type might include
#an application along with its header and library files, while an
#"End user" install type might just include the application's
#executable. Each component identifies itself with one or more
#install types via the INSTALL_TYPES argument to
#cpack_add_component.
#
#DISPLAY_NAME is the displayed name of the install type, which will
#typically show up in a drop-down box within a graphical
#installer. This value can be any string.
##end
#
##macro
#cpack_configure_downloads - Configure CPack to download selected
#components on-the-fly as part of the installation process.
#
#  cpack_configure_downloads(site
#                            [UPLOAD_DIRECTORY dirname]
#                            [ALL]
#                            [ADD_REMOVE|NO_ADD_REMOVE])
#
#The cpack_configure_downloads command configures installation-time
#downloads of selected components. For each downloadable component,
#CPack will create an archive containing the contents of that
#component, which should be uploaded to the given site. When the
#user selects that component for installation, the installer will
#download and extract the component in place. This feature is
#useful for creating small installers that only download the
#requested components, saving bandwidth. Additionally, the
#installers are small enough that they will be installed as part of
#the normal installation process, and the "Change" button in
#Windows Add/Remove Programs control panel will allow one to add or
#remove parts of the application after the original
#installation. On Windows, the downloaded-components functionality
#requires the ZipDLL plug-in for NSIS, available at:
#
#  http://nsis.sourceforge.net/ZipDLL_plug-in
#
#On Mac OS X, installers that download components on-the-fly can
#only be built and installed on system using Mac OS X 10.5 or
#later.
#
#The site argument is a URL where the archives for downloadable
#components will reside, e.g., http://www.cmake.org/files/2.6.1/installer/
#All of the archives produced by CPack should be uploaded to that location.
#
#UPLOAD_DIRECTORY is the local directory where CPack will create the
#various archives for each of the components. The contents of this
#directory should be uploaded to a location accessible by the URL given
#in the site argument. If omitted, CPack will use the directory
#CPackUploads inside the CMake binary directory to store the generated
#archives.
#
#The ALL flag indicates that all components be downloaded. Otherwise, only
#those components explicitly marked as DOWNLOADED or that have a specified
#ARCHIVE_FILE will be downloaded. Additionally, the ALL option implies
#ADD_REMOVE (unless NO_ADD_REMOVE is specified).
#
#ADD_REMOVE indicates that CPack should install a copy of the installer
#that can be called from Windows' Add/Remove Programs dialog (via the
#"Modify" button) to change the set of installed components. NO_ADD_REMOVE
#turns off this behavior. This option is ignored on Mac OS X.
##endmacro

#=============================================================================
# Copyright 2006-2009 Kitware, Inc.
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
# (To distribute this file outside of CMake, substitute the full
#  License text for the above reference.)

# Define var in order to avoid multiple inclusion
if(NOT CPackComponent_CMake_INCLUDED)
set(CPackComponent_CMake_INCLUDED 1)

# Argument-parsing macro from http://www.cmake.org/Wiki/CMakeMacroParseArguments
macro(cpack_parse_arguments prefix arg_names option_names)
  set(${prefix}_DEFAULT_ARGS)
  foreach(arg_name ${arg_names})
    set(${prefix}_${arg_name})
  endforeach()
  foreach(option ${option_names})
    set(${prefix}_${option} FALSE)
  endforeach()

set(current_arg_name DEFAULT_ARGS)
  set(current_arg_list)
  foreach(arg ${ARGN})
    set(larg_names ${arg_names})
    list(FIND larg_names "${arg}" is_arg_name)
    if (is_arg_name GREATER -1)
      set(${prefix}_${current_arg_name} ${current_arg_list})
      set(current_arg_name ${arg})
      set(current_arg_list)
    else ()
      set(loption_names ${option_names})
      list(FIND loption_names "${arg}" is_option)
      if (is_option GREATER -1)
        set(${prefix}_${arg} TRUE)
      else ()
        set(current_arg_list ${current_arg_list} ${arg})
      endif ()
    endif ()
  endforeach()
  set(${prefix}_${current_arg_name} ${current_arg_list})
endmacro()

# Macro that appends a SET command for the given variable name (var)
# to the macro named strvar, but only if the variable named "var"
# has been defined. The string will eventually be appended to a CPack
# configuration file.
macro(cpack_append_variable_set_command var strvar)
  if (DEFINED ${var})
    set(${strvar} "${${strvar}}set(${var}")
    foreach(APPENDVAL ${${var}})
      set(${strvar} "${${strvar}} ${APPENDVAL}")
    endforeach()
    set(${strvar} "${${strvar}})\n")
  endif ()
endmacro()

# Macro that appends a SET command for the given variable name (var)
# to the macro named strvar, but only if the variable named "var"
# has been defined and is a string. The string will eventually be
# appended to a CPack configuration file.
macro(cpack_append_string_variable_set_command var strvar)
  if (DEFINED ${var})
    list(LENGTH ${var} CPACK_APP_VALUE_LEN)
    if(${CPACK_APP_VALUE_LEN} EQUAL 1)
      set(${strvar} "${${strvar}}set(${var} \"${${var}}\")\n")
    endif()
  endif ()
endmacro()

# Macro that appends a SET command for the given variable name (var)
# to the macro named strvar, but only if the variable named "var"
# has been set to true. The string will eventually be
# appended to a CPack configuration file.
macro(cpack_append_option_set_command var strvar)
  if (${var})
    list(LENGTH ${var} CPACK_APP_VALUE_LEN)
    if(${CPACK_APP_VALUE_LEN} EQUAL 1)
      set(${strvar} "${${strvar}}set(${var} TRUE)\n")
    endif()
  endif ()
endmacro()

# Macro that adds a component to the CPack installer
macro(cpack_add_component compname)
  string(TOUPPER ${compname} CPACK_ADDCOMP_UNAME)
  cpack_parse_arguments(CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}
    "DISPLAY_NAME;DESCRIPTION;GROUP;DEPENDS;INSTALL_TYPES;ARCHIVE_FILE"
    "HIDDEN;REQUIRED;DISABLED;DOWNLOADED"
    ${ARGN}
    )

if (CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DOWNLOADED)
    set(CPACK_ADDCOMP_STR "\n# Configuration for downloaded component \"${compname}\"\n")
  else ()
    set(CPACK_ADDCOMP_STR "\n# Configuration for component \"${compname}\"\n")
  endif ()

if(NOT CPACK_MONOLITHIC_INSTALL)
    # If the user didn't set CPACK_COMPONENTS_ALL explicitly, update the
    # value of CPACK_COMPONENTS_ALL in the configuration file. This will
    # take care of any components that have been added after the CPack
    # moduled was included.
    if(NOT CPACK_COMPONENTS_ALL_SET_BY_USER)
      get_cmake_property(CPACK_ADDCOMP_COMPONENTS COMPONENTS)
      set(CPACK_ADDCOMP_STR "${CPACK_ADDCOMP_STR}\nSET(CPACK_COMPONENTS_ALL")
      foreach(COMP ${CPACK_ADDCOMP_COMPONENTS})
       set(CPACK_ADDCOMP_STR "${CPACK_ADDCOMP_STR} ${COMP}")
      endforeach()
      set(CPACK_ADDCOMP_STR "${CPACK_ADDCOMP_STR})\n")
    endif()
  endif()

cpack_append_string_variable_set_command(
    CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DISPLAY_NAME
    CPACK_ADDCOMP_STR)
  cpack_append_string_variable_set_command(
    CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DESCRIPTION
    CPACK_ADDCOMP_STR)
  cpack_append_variable_set_command(
    CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_GROUP
    CPACK_ADDCOMP_STR)
  cpack_append_variable_set_command(
    CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DEPENDS
    CPACK_ADDCOMP_STR)
  cpack_append_variable_set_command(
    CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_INSTALL_TYPES
    CPACK_ADDCOMP_STR)
  cpack_append_string_variable_set_command(
    CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_ARCHIVE_FILE
    CPACK_ADDCOMP_STR)
  cpack_append_option_set_command(
    CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_HIDDEN
    CPACK_ADDCOMP_STR)
  cpack_append_option_set_command(
    CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_REQUIRED
    CPACK_ADDCOMP_STR)
  cpack_append_option_set_command(
    CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DISABLED
    CPACK_ADDCOMP_STR)
  cpack_append_option_set_command(
    CPACK_COMPONENT_${CPACK_ADDCOMP_UNAME}_DOWNLOADED
    CPACK_ADDCOMP_STR)
  # Backward compatibility issue.
  # Write to config iff the macros is used after CPack.cmake has been
  # included, other it's not necessary because the variables
  # will be encoded by cpack_encode_variables.
  if(CPack_CMake_INCLUDED)
    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_ADDCOMP_STR}")
  endif()
endmacro()

# Macro that adds a component group to the CPack installer
macro(cpack_add_component_group grpname)
  string(TOUPPER ${grpname} CPACK_ADDGRP_UNAME)
  cpack_parse_arguments(CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}
    "DISPLAY_NAME;DESCRIPTION"
    "EXPANDED;BOLD_TITLE"
    ${ARGN}
    )

set(CPACK_ADDGRP_STR "\n# Configuration for component group \"${grpname}\"\n")
  cpack_append_string_variable_set_command(
    CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_DISPLAY_NAME
    CPACK_ADDGRP_STR)
  cpack_append_string_variable_set_command(
    CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_DESCRIPTION
    CPACK_ADDGRP_STR)
  cpack_append_option_set_command(
    CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_EXPANDED
    CPACK_ADDGRP_STR)
  cpack_append_option_set_command(
    CPACK_COMPONENT_GROUP_${CPACK_ADDGRP_UNAME}_BOLD_TITLE
    CPACK_ADDGRP_STR)
  # Backward compatibility issue.
  # Write to config iff the macros is used after CPack.cmake has been
  # included, other it's not necessary because the variables
  # will be encoded by cpack_encode_variables.
  if(CPack_CMake_INCLUDED)
    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_ADDGRP_STR}")
  endif()
endmacro()

# Macro that adds an installation type to the CPack installer
macro(cpack_add_install_type insttype)
  string(TOUPPER ${insttype} CPACK_INSTTYPE_UNAME)
  cpack_parse_arguments(CPACK_INSTALL_TYPE_${CPACK_INSTTYPE_UNAME}
    "DISPLAY_NAME"
    ""
    ${ARGN}
    )

set(CPACK_INSTTYPE_STR
    "\n# Configuration for installation type \"${insttype}\"\n")
  set(CPACK_INSTTYPE_STR
    "${CPACK_INSTTYPE_STR}list(APPEND CPACK_ALL_INSTALL_TYPES ${insttype})\n")
  cpack_append_string_variable_set_command(
    CPACK_INSTALL_TYPE_${CPACK_INSTTYPE_UNAME}_DISPLAY_NAME
    CPACK_INSTTYPE_STR)
  # Backward compatibility issue.
  # Write to config iff the macros is used after CPack.cmake has been
  # included, other it's not necessary because the variables
  # will be encoded by cpack_encode_variables.
  if(CPack_CMake_INCLUDED)
    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_INSTTYPE_STR}")
  endif()
endmacro()

macro(cpack_configure_downloads site)
  cpack_parse_arguments(CPACK_DOWNLOAD
    "UPLOAD_DIRECTORY"
    "ALL;ADD_REMOVE;NO_ADD_REMOVE"
    ${ARGN}
    )

set(CPACK_CONFIG_DL_STR
    "\n# Downloaded components configuration\n")
  set(CPACK_UPLOAD_DIRECTORY ${CPACK_DOWNLOAD_UPLOAD_DIRECTORY})
  set(CPACK_DOWNLOAD_SITE ${site})
  cpack_append_string_variable_set_command(
    CPACK_DOWNLOAD_SITE
    CPACK_CONFIG_DL_STR)
  cpack_append_string_variable_set_command(
    CPACK_UPLOAD_DIRECTORY
    CPACK_CONFIG_DL_STR)
  cpack_append_option_set_command(
    CPACK_DOWNLOAD_ALL
    CPACK_CONFIG_DL_STR)
  if (${CPACK_DOWNLOAD_ALL} AND NOT ${CPACK_DOWNLOAD_NO_ADD_REMOVE})
    set(CPACK_DOWNLOAD_ADD_REMOVE ON)
  endif ()
  set(CPACK_ADD_REMOVE ${CPACK_DOWNLOAD_ADD_REMOVE})
  cpack_append_option_set_command(
    CPACK_ADD_REMOVE
    CPACK_CONFIG_DL_STR)
  # Backward compatibility issue.
  # Write to config iff the macros is used after CPack.cmake has been
  # included, other it's not necessary because the variables
  # will be encoded by cpack_encode_variables.
  if(CPack_CMake_INCLUDED)
    file(APPEND "${CPACK_OUTPUT_CONFIG_FILE}" "${CPACK_CONFIG_DL_STR}")
  endif()
endmacro()
endif()