EVOLUTION-MANAGER

Edit File: terragendataset.cpp

/******************************************************************************
 * terragendataset.cpp,v 1.2
 *
 * Project:  Terragen(tm) TER Driver
 * Purpose:  Reader for Terragen TER documents
 * Author:   Ray Gardener, Daylon Graphics Ltd.
 *
 * Portions of this module derived from GDAL drivers by
 * Frank Warmerdam, see http://www.gdal.org

rcg    apr 19/06       Fixed bug with hf size being misread by one
                        if xpts/ypts tags not included in file.
                        Added Create() support.
                        Treat pixels as points.

rcg    jun  6/07       Better heightscale/baseheight determination
                    when writing.

*
 ******************************************************************************
 * Copyright (c) 2006-2007 Daylon Graphics Ltd.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included
 * in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 ******************************************************************************
 */

/*
        Terragen format notes:

Based on official Planetside specs.

All distances along all three axes are in
        terrain units, which are 30m by default.
        If a SCAL chunk is present, however, it
        can indicate something other than 30.
        Note that uniform scaling should be used.

The offset (base height) in the ALTW chunk
        is in terrain units, and the scale (height scale)
        is a normalized value using unsigned 16-bit notation.
        The physical terrain value for a read pixel is
        hv' = hv * scale / 65536 + offset.
        It still needs to be scaled by SCAL to
        get to meters.

For writing:

SCAL = gridpost distance in meters
        hv_px = hv_m / SCAL
        span_px = span_m / SCAL
        offset = see TerragenDataset::write_header()
        scale = see TerragenDataset::write_header()
        physical hv =
          (hv_px - offset) * 65536.0/scale

We tell callers that:

Elevations are Int16 when reading,
        and Float32 when writing. We need logical
        elevations when writing so that we can
        encode them with as much precision as possible
        when going down to physical 16-bit ints.
        Implementing band::SetScale/SetOffset won't work because
        it requires callers to know format write details.
        So we've added two Create() options that let the
        caller tell us the span's logical extent, and with
        those two values we can convert to physical pixels.

band::GetUnitType() returns meters.
        band::GetScale() returns SCAL * (scale/65536)
        band::GetOffset() returns SCAL * offset
        ds::GetProjectionRef() returns a local CS
                using meters.
        ds::GetGeoTransform() returns a scale matrix
                having SCAL sx,sy members.

ds::SetGeoTransform() lets us establish the
                size of ground pixels.
        ds::SetProjection() lets us establish what
                units ground measures are in (also needed
                to calc the size of ground pixels).
        band::SetUnitType() tells us what units
                the given Float32 elevations are in.
        band::SetScale() is unused.
        band::SetOffset() is unused.
*/

#include "cpl_string.h"
#include "gdal_frmts.h"
#include "gdal_pam.h"
#include "ogr_spatialref.h"

#include <cmath>

#include <algorithm>

// CPL_CVSID("$Id: terragendataset.cpp 36501 2016-11-25 14:09:24Z rouault $");

const double kdEarthCircumPolar = 40007849;
const double kdEarthCircumEquat = 40075004;

static double average(double a, double b)
{
    return 0.5 * (a + b);
}

static double degrees_to_radians(double d)
{
    return d * 0.017453292;
}

static bool approx_equal(double a, double b)
{
    const double epsilon = 1e-5;
    return std::abs(a-b) <= epsilon;
}

/************************************************************************/
/* ==================================================================== */
/*                              TerragenDataset                         */
/* ==================================================================== */
/************************************************************************/

class TerragenRasterBand;

class TerragenDataset : public GDALPamDataset
{
    friend class TerragenRasterBand;

double              m_dScale,
                        m_dOffset,
                        m_dSCAL, // 30.0 normally, from SCAL chunk
                        m_adfTransform[6],
                        m_dGroundScale,
                        m_dMetersPerGroundUnit,
                        m_dMetersPerElevUnit,
                        m_dLogSpan[2],
                        m_span_m[2],
                        m_span_px[2];

VSILFILE*           m_fp;
    vsi_l_offset        m_nDataOffset;

GInt16              m_nHeightScale;
    GInt16              m_nBaseHeight;

char*               m_pszFilename;
    char*               m_pszProjection;
    char                m_szUnits[32];

bool                m_bIsGeo;

int         LoadFromFile();

public:
    TerragenDataset();
    virtual ~TerragenDataset();

static GDALDataset* Open( GDALOpenInfo* );
    static GDALDataset* Create( const char* pszFilename,
                                int nXSize, int nYSize, int nBands,
                                GDALDataType eType, char** papszOptions );

virtual CPLErr      GetGeoTransform( double* ) override;
    virtual const char* GetProjectionRef(void) override;
    virtual CPLErr SetProjection( const char * ) override;
    virtual CPLErr SetGeoTransform( double * ) override;

protected:
    bool get(GInt16&);
    bool get(GUInt16&);
    bool get(float&);
    bool put(GInt16);
    bool put(float);
    bool skip(size_t n) { return 0 == VSIFSeekL(m_fp, n, SEEK_CUR); }
    bool pad(size_t n) { return skip( n ); }

bool read_next_tag(char*);
    bool write_next_tag(const char*);
    static bool tag_is(const char* szTag, const char*);

bool write_header(void);
};

/************************************************************************/
/* ==================================================================== */
/*                            TerragenRasterBand                        */
/* ==================================================================== */
/************************************************************************/

class TerragenRasterBand : public GDALPamRasterBand
{
    friend class TerragenDataset;

void*               m_pvLine;
    bool            m_bFirstTime;

public:

explicit TerragenRasterBand(TerragenDataset*);
    virtual ~TerragenRasterBand()
    {
        if(m_pvLine != NULL)
            CPLFree(m_pvLine);
    }

// Geomeasure support.
    virtual CPLErr IReadBlock( int, int, void * ) override;
    virtual const char* GetUnitType() override;
    virtual double GetOffset(int* pbSuccess = NULL) override;
    virtual double GetScale(int* pbSuccess = NULL) override;

virtual CPLErr IWriteBlock( int, int, void * ) override;
    virtual CPLErr SetUnitType( const char* ) override;
};

/************************************************************************/
/*                         TerragenRasterBand()                         */
/************************************************************************/

TerragenRasterBand::TerragenRasterBand( TerragenDataset *poDSIn ) :
    m_pvLine(CPLMalloc( sizeof(GInt16) * poDSIn->GetRasterXSize() )),
    m_bFirstTime(true)
{
    poDS = poDSIn;
    nBand = 1;

eDataType = poDSIn->GetAccess() == GA_ReadOnly
        ? GDT_Int16
        : GDT_Float32;

nBlockXSize = poDSIn->GetRasterXSize();
    nBlockYSize = 1;
}

/************************************************************************/
/*                             IReadBlock()                             */
/************************************************************************/

CPLErr TerragenRasterBand::IReadBlock( CPL_UNUSED int nBlockXOff,
                                       int nBlockYOff,
                                       void* pImage )
{
    //CPLAssert( sizeof(float) == sizeof(GInt32) );
    CPLAssert( nBlockXOff == 0  );
    CPLAssert( pImage != NULL );

TerragenDataset& ds = *reinterpret_cast<TerragenDataset *>( poDS );

/* -------------------------------------------------------------------- */
/*      Seek to scanline.
        Terragen is a bottom-top format, so we have to
        invert the row location.
 -------------------------------------------------------------------- */
    const size_t rowbytes = nBlockXSize * sizeof(GInt16);

if(0 != VSIFSeekL(
           ds.m_fp,
           ds.m_nDataOffset +
           (ds.GetRasterYSize() -1 - nBlockYOff) * rowbytes,
           SEEK_SET))
    {
        CPLError( CE_Failure, CPLE_FileIO,
                  "Terragen Seek failed:%s", VSIStrerror( errno ) );
        return CE_Failure;
    }

/* -------------------------------------------------------------------- */
/*      Read the scanline into the line buffer.                        */
/* -------------------------------------------------------------------- */

if( VSIFReadL( pImage, rowbytes, 1, ds.m_fp ) != 1 )
    {
        CPLError( CE_Failure, CPLE_FileIO,
                  "Terragen read failed:%s", VSIStrerror( errno ) );
        return CE_Failure;
    }

/* -------------------------------------------------------------------- */
/*      Swap on MSB platforms.                                          */
/* -------------------------------------------------------------------- */
#ifdef CPL_MSB
    GDALSwapWords( pImage, sizeof(GInt16), nRasterXSize, sizeof(GInt16) );
#endif

return CE_None;
}

/************************************************************************/
/*                            GetUnitType()                             */
/************************************************************************/
const char *TerragenRasterBand::GetUnitType()
{
    // todo: Return elevation units.
    // For Terragen documents, it's the same as the ground units.
    TerragenDataset *poGDS = reinterpret_cast<TerragenDataset *>( poDS );

return poGDS->m_szUnits;
}

/************************************************************************/
/*                              GetScale()                              */
/************************************************************************/

double TerragenRasterBand::GetScale(int* pbSuccess)
{
    const TerragenDataset& ds = *reinterpret_cast<TerragenDataset *>( poDS );
    if(pbSuccess != NULL)
        *pbSuccess = TRUE;

return ds.m_dScale;
}

/************************************************************************/
/*                             GetOffset()                              */
/************************************************************************/

double TerragenRasterBand::GetOffset(int* pbSuccess)
{
    const TerragenDataset& ds = *reinterpret_cast<TerragenDataset *>( poDS );
    if(pbSuccess != NULL)
        *pbSuccess = TRUE;

return ds.m_dOffset;
}

/************************************************************************/
/*                             IWriteBlock()                            */
/************************************************************************/

CPLErr TerragenRasterBand::IWriteBlock
(
    CPL_UNUSED int nBlockXOff,
    int nBlockYOff,
    void* pImage
)
{
    CPLAssert( nBlockXOff == 0  );
    CPLAssert( pImage != NULL );
    CPLAssert( m_pvLine != NULL );

const size_t pixelsize = sizeof(GInt16);

TerragenDataset& ds = *reinterpret_cast<TerragenDataset *>(poDS );
    if( m_bFirstTime )
    {
        m_bFirstTime = false;
        ds.write_header();
        ds.m_nDataOffset = VSIFTellL(ds.m_fp);
    }
    const size_t rowbytes = nBlockXSize * pixelsize;

GInt16* pLine = reinterpret_cast<GInt16 *>( m_pvLine );

if(0 == VSIFSeekL(
           ds.m_fp,
           ds.m_nDataOffset +
           // Terragen is Y inverted.
           (ds.GetRasterYSize()-1-nBlockYOff) * rowbytes,
           SEEK_SET))
    {
        // Convert each float32 to int16.
        float* pfImage = reinterpret_cast<float *>( pImage );
        for( size_t x = 0; x < static_cast<size_t>( nBlockXSize ); x++ )
        {
            const double f = pfImage[x] * ds.m_dMetersPerElevUnit / ds.m_dSCAL;
            const GInt16 hv = static_cast<GInt16>(
                ( f - ds.m_nBaseHeight ) * 65536.0 / ds.m_nHeightScale
                /*+ ds.m_nShift*/ );
            pLine[x] = hv;
        }

#ifdef CPL_MSB
        GDALSwapWords( m_pvLine, pixelsize, nBlockXSize, pixelsize );
#endif
        if(1 == VSIFWriteL(m_pvLine, rowbytes, 1, ds.m_fp))
            return CE_None;
    }

return CE_Failure;
}

CPLErr TerragenRasterBand::SetUnitType( const char* psz )
{
    TerragenDataset& ds = *reinterpret_cast<TerragenDataset *>( poDS );

if(EQUAL(psz, "m"))
        ds.m_dMetersPerElevUnit = 1.0;
    else if(EQUAL(psz, "ft"))
        ds.m_dMetersPerElevUnit = 0.3048;
    else if(EQUAL(psz, "sft"))
        ds.m_dMetersPerElevUnit = 1200.0 / 3937.0;
    else
        return CE_Failure;

return CE_None;
}

/************************************************************************/
/* ==================================================================== */
/*                          TerragenDataset                             */
/* ==================================================================== */
/************************************************************************/

/************************************************************************/
/*                          TerragenDataset()                           */
/************************************************************************/

TerragenDataset::TerragenDataset() :
    m_dScale(0.0),
    m_dOffset(0.0),
    m_dSCAL(30.0),
    m_dGroundScale(0.0),
    m_dMetersPerGroundUnit(1.0),
    m_dMetersPerElevUnit(0.0),
    m_fp(NULL),
    m_nDataOffset(0),
    m_nHeightScale(0),
    m_nBaseHeight(0),
    m_pszFilename(NULL),
    m_pszProjection(NULL),
    m_bIsGeo(false)
{
    m_dLogSpan[0] = 0.0;
    m_dLogSpan[1] = 0.0;

m_adfTransform[0] = 0.0;
    m_adfTransform[1] = m_dSCAL;
    m_adfTransform[2] = 0.0;
    m_adfTransform[3] = 0.0;
    m_adfTransform[4] = 0.0;
    m_adfTransform[5] = m_dSCAL;
    m_span_m[0] = 0.0;
    m_span_m[1] = 0.0;
    m_span_px[0] = 0.0;
    m_span_px[1] = 0.0;
    memset( m_szUnits, 0, sizeof(m_szUnits) );
}

/************************************************************************/
/*                          ~TerragenDataset()                          */
/************************************************************************/

TerragenDataset::~TerragenDataset()

{
    FlushCache();

CPLFree(m_pszProjection);
    CPLFree(m_pszFilename);

if( m_fp != NULL )
        VSIFCloseL( m_fp );
}

bool TerragenDataset::write_header()
{
    char szHeader[16];
    // cppcheck-suppress bufferNotZeroTerminated
    memcpy(szHeader, "TERRAGENTERRAIN ", sizeof(szHeader));

if(1 != VSIFWriteL( reinterpret_cast<void *>( szHeader ), sizeof(szHeader), 1, m_fp ))
    {
        CPLError( CE_Failure, CPLE_FileIO,
                  "Couldn't write to Terragen file %s.\n"
                  "Is file system full?",
                  m_pszFilename );
        VSIFCloseL( m_fp );

return false;
    }

// --------------------------------------------------------------------
//      Write out the heightfield dimensions, etc.
// --------------------------------------------------------------------

const int nXSize = GetRasterXSize();
    const int nYSize = GetRasterYSize();

write_next_tag( "SIZE" );
    put( static_cast<GInt16>( std::min( nXSize, nYSize ) - 1 ) );
    pad( sizeof(GInt16) );

if(nXSize != nYSize)
    {
        write_next_tag( "XPTS" );
        put( static_cast<GInt16>( nXSize ) );
        pad( sizeof(GInt16) );
        write_next_tag( "YPTS" );
        put( static_cast<GInt16>( nYSize ) );
        pad( sizeof(GInt16) );
    }

if(m_bIsGeo)
    {
        /*
          With a geographic projection (degrees),
          m_dGroundScale will be in degrees and
          m_dMetersPerGroundUnit is undefined.
          So we're going to estimate a m_dMetersPerGroundUnit
          value here (i.e., meters per degree).

We figure out the degree size of one
          pixel, and then the latitude degrees
          of the heightfield's center. The circumference of
          the latitude's great circle lets us know how
          wide the pixel is in meters, and we
          average that with the pixel's meter breadth,
          which is based on the polar circumference.
        */

/* const double m_dDegLongPerPixel =
              fabs(m_adfTransform[1]); */

const double m_dDegLatPerPixel = std::abs(m_adfTransform[5]);

/* const double m_dCenterLongitude =
              m_adfTransform[0] +
              (0.5 * m_dDegLongPerPixel * (nXSize-1)); */

const double m_dCenterLatitude =
            m_adfTransform[3] +
            (0.5 * m_dDegLatPerPixel * (nYSize-1));

const double dLatCircum = kdEarthCircumEquat
            * std::sin( degrees_to_radians( 90.0 - m_dCenterLatitude ) );

const double dMetersPerDegLongitude = dLatCircum / 360;
        /* const double dMetersPerPixelX =
              (m_dDegLongPerPixel / 360) * dLatCircum; */

const double dMetersPerDegLatitude =
            kdEarthCircumPolar / 360;
        /* const double dMetersPerPixelY =
              (m_dDegLatPerPixel / 360) * kdEarthCircumPolar; */

m_dMetersPerGroundUnit =
            average(dMetersPerDegLongitude, dMetersPerDegLatitude);
    }

m_dSCAL = m_dGroundScale * m_dMetersPerGroundUnit;

if(m_dSCAL != 30.0)
    {
        const float sc = static_cast<float>( m_dSCAL );
        write_next_tag( "SCAL" );
        put( sc );
        put( sc );
        put( sc );
    }

if( !write_next_tag( "ALTW" ) )
    {
        CPLError( CE_Failure, CPLE_FileIO,
                  "Couldn't write to Terragen file %s.\n"
                  "Is file system full?",
                  m_pszFilename );
        VSIFCloseL( m_fp );

return false;
    }

// Compute physical scales and offsets.
    m_span_m[0] = m_dLogSpan[0] * m_dMetersPerElevUnit;
    m_span_m[1] = m_dLogSpan[1] * m_dMetersPerElevUnit;

m_span_px[0] = m_span_m[0] / m_dSCAL;
    m_span_px[1] = m_span_m[1] / m_dSCAL;

const double span_px = m_span_px[1] - m_span_px[0];
    m_nHeightScale = static_cast<GInt16>( span_px );
    if(m_nHeightScale == 0)
        m_nHeightScale++;

// TODO(schwehr): Make static functions.
#define P2L_PX(n, hs, bh) (static_cast<double>( n ) / 65536.0 * (hs) + (bh))

#define L2P_PX(n, hs, bh) (static_cast<int>( ((n)-(bh)) * 65536.0 / (hs) ) )

// Increase the heightscale until the physical span
    // fits within a 16-bit range. The smaller the logical span,
    // the more necessary this becomes.
    int hs = m_nHeightScale;
    int bh = 0;
    for( ; hs <= 32767; hs++)
    {
        double prevdelta = 1.0e30;
        for( bh = -32768; bh <= 32767; bh++ )
        {
            const int nValley = L2P_PX(m_span_px[0], hs, bh);
            if(nValley < -32768) continue;
            const int nPeak = L2P_PX(m_span_px[1], hs, bh);
            if(nPeak > 32767) continue;

// now see how closely the baseheight gets
            // to the pixel span.
            const double d = P2L_PX(nValley, hs, bh);
            const double delta = std::abs(d - m_span_px[0]);
            if(delta < prevdelta) // Converging?
                prevdelta = delta;
            else
            {
                // We're diverging, so use the previous bh
                // and stop looking.
                bh--;
                break;
            }
        }
        if(bh != 32768) break;
    }
    if(hs == 32768)
    {
        CPLError( CE_Failure, CPLE_FileIO,
                  "Couldn't write to Terragen file %s.\n"
                  "Cannot find adequate heightscale/baseheight combination.",
                  m_pszFilename );
        VSIFCloseL( m_fp );

return false;
    }

m_nHeightScale = static_cast<GInt16>( hs );
    m_nBaseHeight = static_cast<GInt16>( bh );

// m_nHeightScale is the one that gives us the
    // widest use of the 16-bit space. However, there
    // might be larger heightscales that, even though
    // the reduce the space usage, give us a better fit
    // for preserving the span extents.

return put(m_nHeightScale) && put(m_nBaseHeight);
}

/************************************************************************/
/*                                get()                                 */
/************************************************************************/

bool TerragenDataset::get(GInt16& value)
{
    if(1 == VSIFReadL(&value, sizeof(value), 1, m_fp))
    {
        CPL_LSBPTR16(&value);
        return true;
    }
    return false;
}

bool TerragenDataset::get(GUInt16& value)
{
    if(1 == VSIFReadL(&value, sizeof(value), 1, m_fp))
    {
        CPL_LSBPTR16(&value);
        return true;
    }
    return false;
}

bool TerragenDataset::get(float& value)
{
    if(1 == VSIFReadL(&value, sizeof(value), 1, m_fp))
    {
        CPL_LSBPTR32(&value);
        return true;
    }
    return false;
}

/************************************************************************/
/*                                put()                                 */
/************************************************************************/

bool TerragenDataset::put(GInt16 n)
{
    CPL_LSBPTR16(&n);
    return 1 == VSIFWriteL(&n, sizeof(n), 1, m_fp);
}

bool TerragenDataset::put(float f)
{
    CPL_LSBPTR32(&f);
    return 1 == VSIFWriteL(&f, sizeof(f), 1, m_fp);
}

/************************************************************************/
/*                              tag stuff                               */
/************************************************************************/

bool TerragenDataset::read_next_tag(char* szTag)
{
    return 1 == VSIFReadL(szTag, 4, 1, m_fp);
}

bool TerragenDataset::write_next_tag(const char* szTag)
{
  return 1 == VSIFWriteL(
      reinterpret_cast<void *>( const_cast<char *> ( szTag ) ), 4, 1, m_fp);
}

bool TerragenDataset::tag_is(const char* szTag, const char* sz)
{
    return 0 == memcmp(szTag, sz, 4);
}

/************************************************************************/
/*                            LoadFromFile()                            */
/************************************************************************/

int TerragenDataset::LoadFromFile()
{
    m_dSCAL = 30.0;
    m_nDataOffset = 0;

if(0 != VSIFSeekL(m_fp, 16, SEEK_SET))
        return FALSE;

char szTag[4];
    if( !read_next_tag(szTag) || !tag_is(szTag, "SIZE") )
        return FALSE;

GUInt16 nSize;
    if( !get(nSize) || !skip(2) )
        return FALSE;

// Set dimensions to SIZE chunk. If we don't
    // encounter XPTS/YPTS chunks, we can assume
    // the terrain to be square.
    GUInt16 xpts = nSize+1;
    GUInt16 ypts = nSize+1;

while( read_next_tag(szTag) )
    {
        if( tag_is(szTag, "XPTS") )
        {
            get(xpts);
            if( xpts < nSize || !skip(2) )
                return FALSE;
            continue;
        }

if( tag_is(szTag, "YPTS") )
        {
            get( ypts );
            if( ypts < nSize || !skip(2) )
                return FALSE;
            continue;
        }

if( tag_is(szTag, "SCAL") )
        {
            float sc[3] = { 0.0f };
            get(sc[0]);
            get(sc[1]);
            get(sc[2]);
            m_dSCAL = sc[1];
            continue;
        }

if( tag_is(szTag, "CRAD") )
        {
            if( !skip(sizeof(float)) )
                return FALSE;
            continue;
        }
        if( tag_is(szTag, "CRVM") )
        {
            if( !skip(sizeof(GUInt32)) )
                return FALSE;
            continue;
        }
        if( tag_is(szTag, "ALTW") )
        {
            get(m_nHeightScale);
            get(m_nBaseHeight);
            m_nDataOffset = VSIFTellL(m_fp);
            if( !skip(static_cast<size_t>(xpts) * static_cast<size_t>(ypts) * sizeof(GInt16)) )
                return FALSE;
            continue;
        }
        if( tag_is(szTag, "EOF ") )
        {
            break;
        }
    }

if(xpts == 0 || ypts == 0 || m_nDataOffset == 0)
        return FALSE;

nRasterXSize = xpts;
    nRasterYSize = ypts;

// todo: sanity check: do we have enough pixels?

// Cache realworld scaling and offset.
    m_dScale = m_dSCAL / 65536 * m_nHeightScale;
    m_dOffset = m_dSCAL * m_nBaseHeight;
    strcpy(m_szUnits, "m");

// Make our projection to have origin at the
    // NW corner, and groundscale to match elev scale
    // (i.e., uniform voxels).
    m_adfTransform[0] = 0.0;
    m_adfTransform[1] = m_dSCAL;
    m_adfTransform[2] = 0.0;
    m_adfTransform[3] = 0.0;
    m_adfTransform[4] = 0.0;
    m_adfTransform[5] = m_dSCAL;

/* -------------------------------------------------------------------- */
/*      Set projection.                                                 */
/* -------------------------------------------------------------------- */
    // Terragen files as of Apr 2006 are partially georeferenced,
    // we can declare a local coordsys that uses meters.
    OGRSpatialReference sr;

sr.SetLocalCS("Terragen world space");
    if(OGRERR_NONE != sr.SetLinearUnits("m", 1.0))
        return FALSE;

if(OGRERR_NONE != sr.exportToWkt(&m_pszProjection))
        return FALSE;

return TRUE;
}

/************************************************************************/
/*                           SetProjection()                            */
/************************************************************************/

CPLErr TerragenDataset::SetProjection( const char * pszNewProjection )
{
    // Terragen files aren't really georeferenced, but
    // we should get the projection's linear units so
    // that we can scale elevations correctly.

//m_dSCAL = 30.0; // default

OGRSpatialReference oSRS( pszNewProjection );

/* -------------------------------------------------------------------- */
/*      Linear units.                                                   */
/* -------------------------------------------------------------------- */
    m_bIsGeo = oSRS.IsGeographic() != FALSE;
    if(m_bIsGeo)
    {
        // The caller is using degrees. We need to convert
        // to meters, otherwise we can't derive a SCAL
        // value to scale elevations with.
        m_bIsGeo = true;
    }
    else
    {
        const double dfLinear = oSRS.GetLinearUnits();

if( approx_equal(dfLinear, 0.3048))
            m_dMetersPerGroundUnit = 0.3048;
        else if( approx_equal(dfLinear, CPLAtof(SRS_UL_US_FOOT_CONV)) )
            m_dMetersPerGroundUnit = CPLAtof(SRS_UL_US_FOOT_CONV);
        else
            m_dMetersPerGroundUnit = 1.0;
    }

return CE_None;
}

/************************************************************************/
/*                          GetProjectionRef()                          */
/************************************************************************/

const char* TerragenDataset::GetProjectionRef(void)
{
    if(m_pszProjection == NULL )
        return "";

return m_pszProjection;
}

/************************************************************************/
/*                          SetGeoTransform()                           */
/************************************************************************/

CPLErr TerragenDataset::SetGeoTransform( double *padfGeoTransform )
{
    memcpy(m_adfTransform, padfGeoTransform,
           sizeof(m_adfTransform));

// Average the projection scales.
    m_dGroundScale =
        average(fabs(m_adfTransform[1]), fabs(m_adfTransform[5]));
    return CE_None;
}

/************************************************************************/
/*                          GetGeoTransform()                           */
/************************************************************************/

CPLErr TerragenDataset::GetGeoTransform(double* padfTransform)
{
    memcpy(padfTransform, m_adfTransform, sizeof(m_adfTransform));
    return CE_None;
}

/************************************************************************/
/*                                Create()                                */
/************************************************************************/
GDALDataset* TerragenDataset::Create
(
    const char* pszFilename,
    int nXSize, int nYSize, int nBands,
    GDALDataType eType, char** papszOptions
)
{
    TerragenDataset* poDS = new TerragenDataset();

poDS->eAccess = GA_Update;

poDS->m_pszFilename = CPLStrdup(pszFilename);

// --------------------------------------------------------------------
    //      Verify input options.
    // --------------------------------------------------------------------
    const char* pszValue = CSLFetchNameValue( papszOptions,"MINUSERPIXELVALUE");
    if( pszValue != NULL )
        poDS->m_dLogSpan[0] = CPLAtof( pszValue );

pszValue = CSLFetchNameValue( papszOptions,"MAXUSERPIXELVALUE");
    if( pszValue != NULL )
        poDS->m_dLogSpan[1] = CPLAtof( pszValue );

if( poDS->m_dLogSpan[1] <= poDS->m_dLogSpan[0] )
    {
        CPLError( CE_Failure, CPLE_AppDefined,
              "Inverted, flat, or unspecified span for Terragen file." );

delete poDS;
        return NULL;
    }

if( eType != GDT_Float32 )
    {
        CPLError( CE_Failure, CPLE_AppDefined,
              "Attempt to create Terragen dataset with a non-float32\n"
              "data type (%s).\n",
                  GDALGetDataTypeName(eType) );

delete poDS;
        return NULL;
    }

if( nBands != 1 )
    {
        CPLError( CE_Failure, CPLE_NotSupported,
                  "Terragen driver doesn't support %d bands. Must be 1.\n",
                  nBands );

delete poDS;
        return NULL;
    }

// --------------------------------------------------------------------
//      Try to create the file.
// --------------------------------------------------------------------

poDS->m_fp = VSIFOpenL( pszFilename, "wb+" );

if( poDS->m_fp == NULL )
    {
        CPLError( CE_Failure, CPLE_OpenFailed,
                  "Attempt to create file `%s' failed.\n",
                  pszFilename );
        delete poDS;
        return NULL;
    }

poDS->nRasterXSize = nXSize;
    poDS->nRasterYSize = nYSize;

// Don't bother writing the header here; the first
    // call to IWriteBlock will do that instead, since
    // the elevation data's location depends on the
    // header size.

// --------------------------------------------------------------------
//      Instance a band.
// --------------------------------------------------------------------
    poDS->SetBand( 1, new TerragenRasterBand( poDS ) );

//VSIFClose( poDS->m_fp );

// return (GDALDataset *) GDALOpen( pszFilename, GA_Update );
    return reinterpret_cast<GDALDataset *>( poDS );
}

/************************************************************************/
/*                                Open()                                */
/************************************************************************/

GDALDataset *TerragenDataset::Open( GDALOpenInfo * poOpenInfo )

{
    // The file should have at least 32 header bytes
    if( poOpenInfo->nHeaderBytes < 32 )
        return NULL;

if( !EQUALN(reinterpret_cast<const char *>( poOpenInfo->pabyHeader ),
                "TERRAGENTERRAIN ", 16) )
        return NULL;

/* -------------------------------------------------------------------- */
/*      Create a corresponding GDALDataset.                             */
/* -------------------------------------------------------------------- */
    TerragenDataset *poDS = new TerragenDataset();

// Reopen for large file access.
    if( poOpenInfo->eAccess == GA_Update )
        poDS->m_fp = VSIFOpenL( poOpenInfo->pszFilename, "rb+" );
    else
        poDS->m_fp = VSIFOpenL( poOpenInfo->pszFilename, "rb" );

if( poDS->m_fp == NULL )
    {
        CPLError( CE_Failure, CPLE_OpenFailed,
                  "Failed to re-open %s within Terragen driver.\n",
                  poOpenInfo->pszFilename );
        delete poDS;
        return NULL;
    }
    poDS->eAccess = poOpenInfo->eAccess;

/* -------------------------------------------------------------------- */
/*      Read the file.                                                  */
/* -------------------------------------------------------------------- */
    if( !poDS->LoadFromFile() )
    {
        delete poDS;
        return NULL;
    }

/* -------------------------------------------------------------------- */
/*      Create band information objects.                                */
/* -------------------------------------------------------------------- */
    poDS->SetBand( 1, new TerragenRasterBand( poDS ));

poDS->SetMetadataItem( GDALMD_AREA_OR_POINT, GDALMD_AOP_POINT );

/* -------------------------------------------------------------------- */
/*      Initialize any PAM information.                                 */
/* -------------------------------------------------------------------- */
    poDS->SetDescription( poOpenInfo->pszFilename );
    poDS->TryLoadXML();

/* -------------------------------------------------------------------- */
/*      Support overviews.                                              */
/* -------------------------------------------------------------------- */
    poDS->oOvManager.Initialize( poDS, poOpenInfo->pszFilename );

return poDS;
}

/************************************************************************/
/*                        GDALRegister_Terragen()                       */
/************************************************************************/

void GDALRegister_Terragen()

{
    if( GDALGetDriverByName( "Terragen" ) != NULL )
        return;

GDALDriver *poDriver = new GDALDriver();

poDriver->SetDescription( "Terragen" );
    poDriver->SetMetadataItem( GDAL_DCAP_RASTER, "YES" );
    poDriver->SetMetadataItem( GDAL_DMD_EXTENSION, "ter" );
    poDriver->SetMetadataItem( GDAL_DMD_LONGNAME, "Terragen heightfield" );
    poDriver->SetMetadataItem( GDAL_DMD_HELPTOPIC, "frmt_terragen.html" );

poDriver->SetMetadataItem( GDAL_DMD_CREATIONOPTIONLIST,
"<CreationOptionList>"
"   <Option name='MINUSERPIXELVALUE' type='float' description='Lowest logical elevation'/>"
"   <Option name='MAXUSERPIXELVALUE' type='float' description='Highest logical elevation'/>"
"</CreationOptionList>" );

poDriver->pfnOpen = TerragenDataset::Open;
    poDriver->pfnCreate = TerragenDataset::Create;

GetGDALDriverManager()->RegisterDriver( poDriver );
}