EVOLUTION-MANAGER

Edit File: STANDARD-MIB.mib

STANDARD-MIB DEFINITIONS ::= BEGIN
 
	IMPORTS
		Counter, TimeTicks
			FROM RFC1155-SMI
		OBJECT-TYPE
			FROM RFC-1212
		DisplayString, mib-2
			FROM RFC1213-MIB
		;

-- Standard Datatypes
 
-- From SNMPv2 (rfc1903)
TruthValue ::= 
-- Represents a boolean value
	 INTEGER { true(1), false(2) }

-- From SNMPv2 (rfc1903)
DateAndTime ::=
--    DESCRIPTION
--            "A date-time specification.
--
--            field  octets  contents                  range
--              1      1-2   year                      0..65536
--              2       3    month                     1..12
--              3       4    day                       1..31
--              4       5    hour                      0..23
--              5       6    minutes                   0..59
--              6       7    seconds                   0..60
--                           (use 60 for leap-second)
--              7       8    deci-seconds              0..9
--              8       9    direction from UTC        '+' / '-'
--              9      10    hours from UTC            0..11
--             10      11    minutes from UTC          0..59
--
--            For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be
--            displayed as:
--
--                             1992-5-26,13:30:15.0,-4:0
--
--            Note that if only local time is known, then timezone
--            information (fields 8-10) is not present."
	OCTET STRING (SIZE (8 | 11))

-- From SNMPv2 (rfc1903)
RowStatus ::= 
	INTEGER {
		-- the following two values are states:
		-- these values may be read or written
		active(1),
		notInService(2),

-- the following value is a state:
		-- this value may be read, but not written
		notReady(3),

-- the following three values are
		-- actions: these values may be written,
		--   but are never read
		createAndGo(4),
		createAndWait(5),
		destroy(6)
		}

system       OBJECT IDENTIFIER ::= { mib-2 1 }
snmp         OBJECT IDENTIFIER ::= { mib-2 11 }

-- the System group
 
-- Implementation of the System group is mandatory for all
-- systems.  If an agent is not configured to have a value
-- for any of these variables, a string of length 0 is
-- returned.
 
sysDescr OBJECT-TYPE
	SYNTAX  DisplayString (SIZE (0..255))
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"A textual description of the entity.  This value
		should include the full name and version
		identification of the system's hardware type,
		software operating-system, and networking
		software.  It is mandatory that this only contain
		printable ASCII characters."
	::= { system 1 }
 
sysObjectID OBJECT-TYPE
	SYNTAX  OBJECT IDENTIFIER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The vendor's authoritative identification of the
		network management subsystem contained in the
		entity.  This value is allocated within the SMI
		enterprises subtree (1.3.6.1.4.1) and provides an
		easy and unambiguous means for determining `what
		kind of box' is being managed.  For example, if
		vendor `Flintstones, Inc.' was assigned the
		subtree 1.3.6.1.4.1.4242, it could assign the
		identifier 1.3.6.1.4.1.4242.1.1 to its `Fred
		Router'."
	::= { system 2 }
 
sysUpTime OBJECT-TYPE
	SYNTAX  TimeTicks
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The time (in hundredths of a second) since the
		network management portion of the system was last
		re-initialized."
	::= { system 3 }
 
sysContact OBJECT-TYPE
	SYNTAX  DisplayString (SIZE (0..255))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The textual identification of the contact person
		for this managed node, together with information
		on how to contact this person."
	::= { system 4 }
 
sysName OBJECT-TYPE
	SYNTAX  DisplayString (SIZE (0..255))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"An administratively-assigned name for this
		managed node.  By convention, this is the node's
		fully-qualified domain name."
	::= { system 5 }
 
sysLocation OBJECT-TYPE
	SYNTAX  DisplayString (SIZE (0..255))
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"The physical location of this node (e.g.,
		`telephone closet, 3rd floor')."
	::= { system 6 }
 
sysServices OBJECT-TYPE
	SYNTAX  INTEGER (0..127)
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"A value which indicates the set of services that
		this entity primarily offers.
 
		The value is a sum.  This sum initially takes the
		value zero, Then, for each layer, L, in the range
		1 through 7, that this node performs transactions
		for, 2 raised to (L - 1) is added to the sum.  For
		example, a node which performs primarily routing
		functions would have a value of 4 (2^(3-1)).  In
		contrast, a node which is a host offering
		application services would have a value of 72
		(2^(4-1) + 2^(7-1)).  Note that in the context of
		the Internet suite of protocols, values should be
		calculated accordingly:
 
			layer  functionality
			1  physical (e.g., repeaters)
			2  datalink/subnetwork (e.g., bridges)
			3  internet (e.g., IP gateways)
			4  end-to-end  (e.g., IP hosts)
			7  applications (e.g., mail relays)
 
		For systems including OSI protocols, layers 5 and
		6 may also be counted."
	::= { system 7 }

-- the SNMP group
 
	-- Implementation of the SNMP group is mandatory for all
	-- systems which support an SNMP protocol entity.  Some of
	-- the objects defined below will be zero-valued in those
	-- SNMP implementations that are optimized to support only
	-- those functions specific to either a management agent or
	-- a management station.  In particular, it should be
	-- observed that the objects below refer to an SNMP entity,
	-- and there may be several SNMP entities residing on a
	-- managed node (e.g., if the node is hosting acting as
	-- a management station).
 
snmpInPkts OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of Messages delivered to the
		SNMP entity from the transport service."
	::= { snmp 1 }
 
snmpOutPkts OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP Messages which were
		passed from the SNMP protocol entity to the
		transport service."
	::= { snmp 2 }
 
snmpInBadVersions OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP Messages which were
		delivered to the SNMP protocol entity and were for
		an unsupported SNMP version."
	::= { snmp 3 }
 
snmpInBadCommunityNames OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP Messages delivered to
		the SNMP protocol entity which used a SNMP
		community name not known to said entity."
	::= { snmp 4 }
 
snmpInBadCommunityUses OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP Messages delivered to
		the SNMP protocol entity which represented an SNMP
		operation which was not allowed by the SNMP
		community named in the Message."
	::= { snmp 5 }
 
snmpInASNParseErrs OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of ASN.1 or BER errors
		encountered by the SNMP protocol entity when
		decoding received SNMP Messages."
	::= { snmp 6 }
 
	-- { snmp 7 } is not used
 
snmpInTooBigs OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP PDUs which were
		delivered to the SNMP protocol entity and for
		which the value of the error-status field is
		`tooBig'."
	::= { snmp 8 }
 
snmpInNoSuchNames OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP PDUs which were
		delivered to the SNMP protocol entity and for
		which the value of the error-status field is
		`noSuchName'."
	::= { snmp 9 }
 
snmpInBadValues OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP PDUs which were
		delivered to the SNMP protocol entity and for
		which the value of the error-status field is
		`badValue'."
	::= { snmp 10 }
 
snmpInReadOnlys OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number valid SNMP PDUs which were
		delivered to the SNMP protocol entity and for
		which the value of the error-status field is
		`readOnly'.  It should be noted that it is a
		protocol error to generate an SNMP PDU which
		contains the value `readOnly' in the error-status
		field, as such this object is provided as a means
		of detecting incorrect implementations of the
		SNMP."
	::= { snmp 11 }
 
snmpInGenErrs OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP PDUs which were
		delivered to the SNMP protocol entity and for
		which the value of the error-status field is
		`genErr'."
	::= { snmp 12 }
 
snmpInTotalReqVars OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of MIB objects which have been
		retrieved successfully by the SNMP protocol entity
		as the result of receiving valid SNMP Get-Request
		and Get-Next PDUs."
	::= { snmp 13 }
 
snmpInTotalSetVars OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of MIB objects which have been
		altered successfully by the SNMP protocol entity
		as the result of receiving valid SNMP Set-Request
		PDUs."
	::= { snmp 14 }
 
snmpInGetRequests OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP Get-Request PDUs which
		have been accepted and processed by the SNMP
		protocol entity."
	::= { snmp 15 }
 
snmpInGetNexts OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP Get-Next PDUs which have
		been accepted and processed by the SNMP protocol
		entity."
	::= { snmp 16 }
 
snmpInSetRequests OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP Set-Request PDUs which
		have been accepted and processed by the SNMP
		protocol entity."
	::= { snmp 17 }
 
snmpInGetResponses OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP Get-Response PDUs which
		have been accepted and processed by the SNMP
		protocol entity."
	::= { snmp 18 }
 
snmpInTraps OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP Trap PDUs which have
		been accepted and processed by the SNMP protocol
		entity."
	::= { snmp 19 }
 
snmpOutTooBigs OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP PDUs which were
		generated by the SNMP protocol entity and for
		which the value of the error-status field is
		`tooBig.'"
	::= { snmp 20 }
 
snmpOutNoSuchNames OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP PDUs which were
		generated by the SNMP protocol entity and for
		which the value of the error-status is
		`noSuchName'."
	::= { snmp 21 }
 
snmpOutBadValues OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP PDUs which were
		generated by the SNMP protocol entity and for
		which the value of the error-status field is
		`badValue'."
	::= { snmp 22 }
 
	-- { snmp 23 } is not used
 
snmpOutGenErrs OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP PDUs which were
		generated by the SNMP protocol entity and for
		which the value of the error-status field is
		`genErr'."
	::= { snmp 24 }
 
snmpOutGetRequests OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP Get-Request PDUs which
		have been generated by the SNMP protocol entity."
	::= { snmp 25 }
 
snmpOutGetNexts OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP Get-Next PDUs which have
		been generated by the SNMP protocol entity."
	::= { snmp 26 }
 
snmpOutSetRequests OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP Set-Request PDUs which
		have been generated by the SNMP protocol entity."
	::= { snmp 27 }
 
snmpOutGetResponses OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP Get-Response PDUs which
		have been generated by the SNMP protocol entity."
	::= { snmp 28 }
 
snmpOutTraps OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The total number of SNMP Trap PDUs which have
		been generated by the SNMP protocol entity."
	::= { snmp 29 }
 
snmpEnableAuthenTraps OBJECT-TYPE
	SYNTAX  INTEGER { enabled(1), disabled(2) }
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"Indicates whether the SNMP agent process is
		permitted to generate authentication-failure
		traps.  The value of this object overrides any
		configuration information; as such, it provides a
		means whereby all authentication-failure traps may
		be disabled.
 
		Note that it is strongly recommended that this
		object be stored in non-volatile memory so that it
		remains constant between re-initializations of the
		network management system."
	::= { snmp 30 }
 
coldStart TRAP-TYPE
	ENTERPRISE  snmp
	DESCRIPTION
		"A coldStart trap signifies that the sending
		protocol entity is reinitializing itself such
		that the agent's configuration or the rotocol
		entity implementation may be altered."
	::= 0

warmStart TRAP-TYPE
	ENTERPRISE  snmp
	DESCRIPTION
		"A warmStart trap signifies that the sending
		protocol entity is reinitializing itself such
		that neither the agent configuration nor the
		protocol entity implementation is altered."
	::= 1

authenticationFailure TRAP-TYPE
	ENTERPRISE  snmp
	DESCRIPTION
		"An authenticationFailure trap signifies that
		the sending protocol entity is the addressee
		of a protocol message that is not properly
		authenticated.  While implementations of the
		SNMP must be capable of generating this trap,
		they must also be capable of suppressing the
		emission of such traps via an implementation-
		specific mechanism."
	::= 4

END