EVOLUTION-MANAGER

Edit File: ptp_clock_kernel.h

/* * PTP 1588 clock support * * Copyright (C) 2010 OMICRON electronics GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _PTP_CLOCK_KERNEL_H_ #define _PTP_CLOCK_KERNEL_H_ #include <linux/device.h> #include <linux/pps_kernel.h> #include <linux/ptp_clock.h> struct ptp_clock_request { enum { PTP_CLK_REQ_EXTTS, PTP_CLK_REQ_PEROUT, PTP_CLK_REQ_PPS, } type; union { struct ptp_extts_request extts; struct ptp_perout_request perout; }; }; struct system_device_crosststamp; /** * struct ptp_system_timestamp - system time corresponding to a PHC timestamp */ struct ptp_system_timestamp { struct timespec64 pre_ts; struct timespec64 post_ts; }; /** * struct ptp_clock_info - decribes a PTP hardware clock * * @owner: The clock driver should set to THIS_MODULE. * @name: A short "friendly name" to identify the clock and to * help distinguish PHY based devices from MAC based ones. * The string is not meant to be a unique id. * @max_adj: The maximum possible frequency adjustment, in parts per billon. * @n_alarm: The number of programmable alarms. * @n_ext_ts: The number of external time stamp channels. * @n_per_out: The number of programmable periodic signals. * @n_pins: The number of programmable pins. * @pps: Indicates whether the clock supports a PPS callback. * @pin_config: Array of length 'n_pins'. If the number of * programmable pins is nonzero, then drivers must * allocate and initialize this array. * * clock operations * * @adjfine: Adjusts the frequency of the hardware clock. * parameter scaled_ppm: Desired frequency offset from * nominal frequency in parts per million, but with a * 16 bit binary fractional field. * * @adjfreq: Adjusts the frequency of the hardware clock. * This method is deprecated. New drivers should implement * the @adjfine method instead. * parameter delta: Desired frequency offset from nominal frequency * in parts per billion * * @adjtime: Shifts the time of the hardware clock. * parameter delta: Desired change in nanoseconds. * * @gettime: Reads the current time from the hardware clock. (deprecated) * parameter ts: Holds the result. * * @settime: Set the current time on the hardware clock. (deprecated) * parameter ts: Time value to set. * * @gettime64: Reads the current time from the hardware clock. * This method is deprecated. New drivers should implement * the @gettimex64 method instead. * parameter ts: Holds the result. * * @gettimex64: Reads the current time from the hardware clock and optionally * also the system clock. * parameter ts: Holds the PHC timestamp. * parameter sts: If not NULL, it holds a pair of timestamps from * the system clock. The first reading is made right before * reading the lowest bits of the PHC timestamp and the second * reading immediately follows that. * * @getcrosststamp: Reads the current time from the hardware clock and * system clock simultaneously. * parameter cts: Contains timestamp (device,system) pair, * where system time is realtime and monotonic. * * @settime64: Set the current time on the hardware clock. * parameter ts: Time value to set. * * @enable: Request driver to enable or disable an ancillary feature. * parameter request: Desired resource to enable or disable. * parameter on: Caller passes one to enable or zero to disable. * * @verify: Confirm that a pin can perform a given function. The PTP * Hardware Clock subsystem maintains the 'pin_config' * array on behalf of the drivers, but the PHC subsystem * assumes that every pin can perform every function. This * hook gives drivers a way of telling the core about * limitations on specific pins. This function must return * zero if the function can be assigned to this pin, and * nonzero otherwise. * parameter pin: index of the pin in question. * parameter func: the desired function to use. * parameter chan: the function channel index to use. * * Drivers should embed their ptp_clock_info within a private * structure, obtaining a reference to it using container_of(). * * The callbacks must all return zero on success, non-zero otherwise. */ struct ptp_clock_info { struct module *owner; char name[16]; s32 max_adj; int n_alarm; int n_ext_ts; int n_per_out; int n_pins; int pps; struct ptp_pin_desc *pin_config; int (*adjfine)(struct ptp_clock_info *ptp, long scaled_ppm); int (*adjfreq)(struct ptp_clock_info *ptp, s32 delta); int (*adjtime)(struct ptp_clock_info *ptp, s64 delta); int (*gettime)(struct ptp_clock_info *ptp, struct timespec *ts); int (*settime)(struct ptp_clock_info *ptp, const struct timespec *ts); int (*gettime64)(struct ptp_clock_info *ptp, struct timespec64 *ts); int (*gettimex64)(struct ptp_clock_info *ptp, struct timespec64 *ts, struct ptp_system_timestamp *sts); int (*getcrosststamp)(struct ptp_clock_info *ptp, struct system_device_crosststamp *cts); int (*settime64)(struct ptp_clock_info *p, const struct timespec64 *ts); int (*enable)(struct ptp_clock_info *ptp, struct ptp_clock_request *request, int on); int (*verify)(struct ptp_clock_info *ptp, unsigned int pin, enum ptp_pin_function func, unsigned int chan); }; struct ptp_clock; /** * ptp_clock_register() - register a PTP hardware clock driver * * @info: Structure describing the new clock. * @parent: Pointer to the parent device of the new clock. * * Returns a valid pointer on success or PTR_ERR on failure. If PHC * support is missing at the configuration level, this function * returns NULL, and drivers are expected to gracefully handle that * case separately. */ extern struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info, struct device *parent); /** * ptp_clock_unregister() - unregister a PTP hardware clock driver * * @ptp: The clock to remove from service. */ extern int ptp_clock_unregister(struct ptp_clock *ptp); enum ptp_clock_events { PTP_CLOCK_ALARM, PTP_CLOCK_EXTTS, PTP_CLOCK_PPS, PTP_CLOCK_PPSUSR, }; /** * struct ptp_clock_event - decribes a PTP hardware clock event * * @type: One of the ptp_clock_events enumeration values. * @index: Identifies the source of the event. * @timestamp: When the event occurred (%PTP_CLOCK_EXTTS only). * @pps_times: When the event occurred (%PTP_CLOCK_PPSUSR only). */ struct ptp_clock_event { int type; int index; union { u64 timestamp; struct pps_event_time pps_times; }; }; /** * ptp_clock_event() - notify the PTP layer about an event * * @ptp: The clock obtained from ptp_clock_register(). * @event: Message structure describing the event. */ extern void ptp_clock_event(struct ptp_clock *ptp, struct ptp_clock_event *event); /** * ptp_clock_index() - obtain the device index of a PTP clock * * @ptp: The clock obtained from ptp_clock_register(). */ extern int ptp_clock_index(struct ptp_clock *ptp); /** * ptp_find_pin() - obtain the pin index of a given auxiliary function * * @ptp: The clock obtained from ptp_clock_register(). * @func: One of the ptp_pin_function enumerated values. * @chan: The particular functional channel to find. * Return: Pin index in the range of zero to ptp_clock_caps.n_pins - 1, * or -1 if the auxiliary function cannot be found. */ int ptp_find_pin(struct ptp_clock *ptp, enum ptp_pin_function func, unsigned int chan); static inline void ptp_read_system_prets(struct ptp_system_timestamp *sts) { if (sts) ktime_get_real_ts64(&sts->pre_ts); } static inline void ptp_read_system_postts(struct ptp_system_timestamp *sts) { if (sts) ktime_get_real_ts64(&sts->post_ts); } #endif