EVOLUTION-MANAGER

Edit File: Kconfig.non_dt

menu "Atmel Non-DT world" config HAVE_AT91_DATAFLASH_CARD bool choice prompt "Atmel AT91 Processor Devices for non DT boards" config ARCH_AT91_NONE bool "None" config ARCH_AT91RM9200 bool "AT91RM9200" select SOC_AT91RM9200 config ARCH_AT91SAM9260 bool "AT91SAM9260 or AT91SAM9XE" select SOC_AT91SAM9260 config ARCH_AT91SAM9261 bool "AT91SAM9261" select SOC_AT91SAM9261 config ARCH_AT91SAM9G10 bool "AT91SAM9G10" select SOC_AT91SAM9261 config ARCH_AT91SAM9263 bool "AT91SAM9263" select SOC_AT91SAM9263 config ARCH_AT91SAM9RL bool "AT91SAM9RL" select SOC_AT91SAM9RL config ARCH_AT91SAM9G20 bool "AT91SAM9G20" select SOC_AT91SAM9260 config ARCH_AT91SAM9G45 bool "AT91SAM9G45" select SOC_AT91SAM9G45 config ARCH_AT91X40 bool "AT91x40" depends on !MMU select ARCH_USES_GETTIMEOFFSET select MULTI_IRQ_HANDLER select SPARSE_IRQ endchoice # ---------------------------------------------------------- if ARCH_AT91RM9200 comment "AT91RM9200 Board Type" config MACH_ONEARM bool "Ajeco 1ARM Single Board Computer" help Select this if you are using Ajeco's 1ARM Single Board Computer. <http://www.ajeco.fi/> config ARCH_AT91RM9200DK bool "Atmel AT91RM9200-DK Development board" select HAVE_AT91_DATAFLASH_CARD help Select this if you are using Atmel's AT91RM9200-DK Development board. (Discontinued) config MACH_AT91RM9200EK bool "Atmel AT91RM9200-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD help Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> config MACH_CSB337 bool "Cogent CSB337" help Select this if you are using Cogent's CSB337 board. <http://www.cogcomp.com/csb_csb337.htm> config MACH_CSB637 bool "Cogent CSB637" help Select this if you are using Cogent's CSB637 board. <http://www.cogcomp.com/csb_csb637.htm> config MACH_CARMEVA bool "Conitec ARM&EVA" help Select this if you are using Conitec's AT91RM9200-MCU-Module. <http://www.conitec.net/english/linuxboard.php> config MACH_ATEB9200 bool "Embest ATEB9200" help Select this if you are using Embest's ATEB9200 board. <http://www.embedinfo.com/english/product/ATEB9200.asp> config MACH_KB9200 bool "KwikByte KB920x" help Select this if you are using KwikByte's KB920x board. <http://www.kwikbyte.com/KB9202.html> config MACH_PICOTUX2XX bool "picotux 200" help Select this if you are using a picotux 200. <http://www.picotux.com/> config MACH_KAFA bool "Sperry-Sun KAFA board" help Select this if you are using Sperry-Sun's KAFA board. config MACH_ECBAT91 bool "emQbit ECB_AT91 SBC" select HAVE_AT91_DATAFLASH_CARD help Select this if you are using emQbit's ECB_AT91 board. <http://wiki.emqbit.com/free-ecb-at91> config MACH_YL9200 bool "ucDragon YL-9200" help Select this if you are using the ucDragon YL-9200 board. config MACH_CPUAT91 bool "Eukrea CPUAT91" help Select this if you are using the Eukrea Electromatique's CPUAT91 board <http://www.eukrea.com/>. config MACH_ECO920 bool "eco920" help Select this if you are using the eco920 board config MACH_RSI_EWS bool "RSI Embedded Webserver" depends on ARCH_AT91RM9200 help Select this if you are using RSIs EWS board. endif # ---------------------------------------------------------- if ARCH_AT91SAM9260 comment "AT91SAM9260 Variants" comment "AT91SAM9260 / AT91SAM9XE Board Type" config MACH_AT91SAM9260EK bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD help Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> config MACH_CAM60 bool "KwikByte KB9260 (CAM60) board" help Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. <http://www.kwikbyte.com/KB9260.html> config MACH_SAM9_L9260 bool "Olimex SAM9-L9260 board" select HAVE_AT91_DATAFLASH_CARD help Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. <http://www.olimex.com/dev/sam9-L9260.html> config MACH_AFEB9260 bool "Custom afeb9260 board v1" help Select this if you are using custom afeb9260 board based on open hardware design. Select this for revision 1 of the board. <svn://194.85.238.22/home/users/george/svn/arm9eb> <http://groups.google.com/group/arm9fpga-evolution-board> config MACH_USB_A9260 bool "CALAO USB-A9260" help Select this if you are using a Calao Systems USB-A9260. <http://www.calao-systems.com> config MACH_QIL_A9260 bool "CALAO QIL-A9260 board" help Select this if you are using a Calao Systems QIL-A9260 Board. <http://www.calao-systems.com> config MACH_CPU9260 bool "Eukrea CPU9260 board" help Select this if you are using a Eukrea Electromatique's CPU9260 Board <http://www.eukrea.com/> config MACH_FLEXIBITY bool "Flexibity Connect board" help Select this if you are using Flexibity Connect board <http://www.flexibity.com> endif # ---------------------------------------------------------- if ARCH_AT91SAM9261 comment "AT91SAM9261 Board Type" config MACH_AT91SAM9261EK bool "Atmel AT91SAM9261-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD help Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> endif # ---------------------------------------------------------- if ARCH_AT91SAM9G10 comment "AT91SAM9G10 Board Type" config MACH_AT91SAM9G10EK bool "Atmel AT91SAM9G10-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD help Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> endif # ---------------------------------------------------------- if ARCH_AT91SAM9263 comment "AT91SAM9263 Board Type" config MACH_AT91SAM9263EK bool "Atmel AT91SAM9263-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD help Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> config MACH_USB_A9263 bool "CALAO USB-A9263" help Select this if you are using a Calao Systems USB-A9263. <http://www.calao-systems.com> endif # ---------------------------------------------------------- if ARCH_AT91SAM9RL comment "AT91SAM9RL Board Type" config MACH_AT91SAM9RLEK bool "Atmel AT91SAM9RL-EK Evaluation Kit" help Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. endif # ---------------------------------------------------------- if ARCH_AT91SAM9G20 comment "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD help Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit that embeds only one SD/MMC slot. config MACH_AT91SAM9G20EK_2MMC depends on MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" help Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and onwards. <http://www.atmel.com/tools/SAM9G20-EK.aspx> config MACH_CPU9G20 bool "Eukrea CPU9G20 board" help Select this if you are using a Eukrea Electromatique's CPU9G20 Board <http://www.eukrea.com/> config MACH_ACMENETUSFOXG20 bool "Acme Systems srl FOX Board G20" help Select this if you are using Acme Systems FOX Board G20 <http://www.acmesystems.it> config MACH_PORTUXG20 bool "taskit PortuxG20" help Select this if you are using taskit's PortuxG20. <http://www.taskit.de/en/> config MACH_STAMP9G20 bool "taskit Stamp9G20 CPU module" help Select this if you are using taskit's Stamp9G20 CPU module on its evaluation board. <http://www.taskit.de/en/> config MACH_PCONTROL_G20 bool "PControl G20 CPU module" help Select this if you are using taskit's Stamp9G20 CPU module on this carrier board, beeing the decentralized unit of a building automation system; featuring nvram, eth-switch, iso-rs485, display, io config MACH_GSIA18S bool "GS_IA18_S board" help This enables support for the GS_IA18_S board produced by GeoSIG Ltd company. This is an internet accelerograph. <http://www.geosig.com> config MACH_USB_A9G20 bool "CALAO USB-A9G20" depends on ARCH_AT91SAM9G20 help Select this if you are using a Calao Systems USB-A9G20. <http://www.calao-systems.com> endif if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) comment "AT91SAM9260/AT91SAM9G20 boards" config MACH_SNAPPER_9260 bool "Bluewater Systems Snapper 9260/9G20 module" help Select this if you are using the Bluewater Systems Snapper 9260 or Snapper 9G20 modules. <http://www.bluewatersys.com/> endif # ---------------------------------------------------------- if ARCH_AT91SAM9G45 comment "AT91SAM9G45 Board Type" config MACH_AT91SAM9M10G45EK bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" help Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit. Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10 families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx> endif # ---------------------------------------------------------- if ARCH_AT91X40 comment "AT91X40 Board Type" config MACH_AT91EB01 bool "Atmel AT91EB01 Evaluation Kit" help Select this if you are using Atmel's AT91EB01 Evaluation Kit. It is also a popular target for simulators such as GDB's ARM simulator (commonly known as the ARMulator) and the Skyeye simulator. endif # ---------------------------------------------------------- comment "AT91 Board Options" config MTD_AT91_DATAFLASH_CARD bool "Enable DataFlash Card support" depends on HAVE_AT91_DATAFLASH_CARD help Enable support for the DataFlash card. endmenu