EVOLUTION-MANAGER

Edit File: fwd.cpp

/******************************************************************************
 * Project:  PROJ.4
 * Purpose:  Forward operation invocation
 * Author:   Thomas Knudsen,  thokn@sdfe.dk,  2018-01-02
 *           Based on material from Gerald Evenden (original pj_fwd)
 *           and Piyush Agram (original pj_fwd3d)
 *
 ******************************************************************************
 * Copyright (c) 2000, Frank Warmerdam
 * Copyright (c) 2018, Thomas Knudsen / SDFE
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included
 * in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 *****************************************************************************/

#include <errno.h>
#include <math.h>

#include "proj_internal.h"
#include <math.h>

#define INPUT_UNITS  P->left
#define OUTPUT_UNITS P->right

static PJ_COORD fwd_prepare (PJ *P, PJ_COORD coo) {
    if (HUGE_VAL==coo.v[0] || HUGE_VAL==coo.v[1] || HUGE_VAL==coo.v[2])
        return proj_coord_error ();

/* The helmert datum shift will choke unless it gets a sensible 4D coordinate */
    if (HUGE_VAL==coo.v[2] && P->helmert) coo.v[2] = 0.0;
    if (HUGE_VAL==coo.v[3] && P->helmert) coo.v[3] = 0.0;

/* Check validity of angular input coordinates */
    if (INPUT_UNITS==PJ_IO_UNITS_RADIANS) {
        double t;

/* check for latitude or longitude over-range */
        t = (coo.lp.phi < 0  ?  -coo.lp.phi  :  coo.lp.phi) - M_HALFPI;
        if (t > PJ_EPS_LAT  ||  coo.lp.lam > 10  ||  coo.lp.lam < -10) {
            proj_errno_set (P, PJD_ERR_LAT_OR_LON_EXCEED_LIMIT);
            return proj_coord_error ();
        }

/* Clamp latitude to -90..90 degree range */
        if (coo.lp.phi > M_HALFPI)
            coo.lp.phi = M_HALFPI;
        if (coo.lp.phi < -M_HALFPI)
            coo.lp.phi = -M_HALFPI;

/* If input latitude is geocentrical, convert to geographical */
        if (P->geoc)
            coo = pj_geocentric_latitude (P, PJ_INV, coo);

/* Ensure longitude is in the -pi:pi range */
        if (0==P->over)
            coo.lp.lam = adjlon(coo.lp.lam);

if (P->hgridshift)
            coo = proj_trans (P->hgridshift, PJ_INV, coo);
        else if (P->helmert || (P->cart_wgs84 != nullptr && P->cart != nullptr)) {
            coo = proj_trans (P->cart_wgs84, PJ_FWD, coo); /* Go cartesian in WGS84 frame */
            if( P->helmert )
                coo = proj_trans (P->helmert,    PJ_INV, coo); /* Step into local frame */
            coo = proj_trans (P->cart,       PJ_INV, coo); /* Go back to angular using local ellps */
        }
        if (coo.lp.lam==HUGE_VAL)
            return coo;
        if (P->vgridshift)
            coo = proj_trans (P->vgridshift, PJ_FWD, coo); /* Go orthometric from geometric */

/* Distance from central meridian, taking system zero meridian into account */
        coo.lp.lam = (coo.lp.lam - P->from_greenwich) - P->lam0;

/* Ensure longitude is in the -pi:pi range */
        if (0==P->over)
            coo.lp.lam = adjlon(coo.lp.lam);

return coo;
    }

/* We do not support gridshifts on cartesian input */
    if (INPUT_UNITS==PJ_IO_UNITS_CARTESIAN && P->helmert)
            return proj_trans (P->helmert, PJ_INV, coo);
    return coo;
}

static PJ_COORD fwd_finalize (PJ *P, PJ_COORD coo) {

switch (OUTPUT_UNITS) {

/* Handle false eastings/northings and non-metric linear units */
    case PJ_IO_UNITS_CARTESIAN:

if (P->is_geocent) {
            coo = proj_trans (P->cart, PJ_FWD, coo);
        }
        coo.xyz.x *= P->fr_meter;
        coo.xyz.y *= P->fr_meter;
        coo.xyz.z *= P->fr_meter;

break;

/* Classic proj.4 functions return plane coordinates in units of the semimajor axis */
    case PJ_IO_UNITS_CLASSIC:
        coo.xy.x *= P->a;
        coo.xy.y *= P->a;

/* Falls through */ /* (<-- GCC warning silencer) */
    /* to continue processing in common with PJ_IO_UNITS_PROJECTED */
    case PJ_IO_UNITS_PROJECTED:
        coo.xyz.x = P->fr_meter  * (coo.xyz.x + P->x0);
        coo.xyz.y = P->fr_meter  * (coo.xyz.y + P->y0);
        coo.xyz.z = P->vfr_meter * (coo.xyz.z + P->z0);
        break;

case PJ_IO_UNITS_WHATEVER:
        break;

case PJ_IO_UNITS_RADIANS:
        coo.lpz.z = P->vfr_meter * (coo.lpz.z + P->z0);

if( P->is_long_wrap_set ) {
            if( coo.lpz.lam != HUGE_VAL ) {
                coo.lpz.lam  = P->long_wrap_center +
                               adjlon(coo.lpz.lam - P->long_wrap_center);
            }
        }

break;
    }

if (P->axisswap)
        coo = proj_trans (P->axisswap, PJ_FWD, coo);

return coo;
}

static PJ_COORD error_or_coord(PJ *P, PJ_COORD coord, int last_errno) {
    if (proj_errno(P))
        return proj_coord_error();

proj_errno_restore(P, last_errno);
    return coord;
}

PJ_XY pj_fwd(PJ_LP lp, PJ *P) {
    int last_errno;
    PJ_COORD coo = {{0,0,0,0}};
    coo.lp = lp;

last_errno = proj_errno_reset(P);

if (!P->skip_fwd_prepare)
        coo = fwd_prepare (P, coo);
    if (HUGE_VAL==coo.v[0] || HUGE_VAL==coo.v[1])
        return proj_coord_error ().xy;

/* Do the transformation, using the lowest dimensional transformer available */
    if (P->fwd)
        coo.xy = P->fwd(coo.lp, P);
    else if (P->fwd3d)
        coo.xyz = P->fwd3d (coo.lpz, P);
    else if (P->fwd4d)
        coo = P->fwd4d (coo, P);
    else {
        proj_errno_set (P, EINVAL);
        return proj_coord_error ().xy;
    }
    if (HUGE_VAL==coo.v[0])
        return proj_coord_error ().xy;

if (!P->skip_fwd_finalize)
        coo = fwd_finalize (P, coo);

return error_or_coord(P, coo, last_errno).xy;
}

PJ_XYZ pj_fwd3d(PJ_LPZ lpz, PJ *P) {
    int last_errno;
    PJ_COORD coo = {{0,0,0,0}};
    coo.lpz = lpz;

last_errno = proj_errno_reset(P);

if (!P->skip_fwd_prepare)
        coo = fwd_prepare (P, coo);
    if (HUGE_VAL==coo.v[0])
        return proj_coord_error ().xyz;

/* Do the transformation, using the lowest dimensional transformer feasible */
    if (P->fwd3d)
        coo.xyz = P->fwd3d(coo.lpz, P);
    else if (P->fwd4d)
        coo = P->fwd4d (coo, P);
    else if (P->fwd)
        coo.xy = P->fwd (coo.lp, P);
    else {
        proj_errno_set (P, EINVAL);
        return proj_coord_error ().xyz;
    }
    if (HUGE_VAL==coo.v[0])
        return proj_coord_error ().xyz;

if (!P->skip_fwd_finalize)
        coo = fwd_finalize (P, coo);

return error_or_coord(P, coo, last_errno).xyz;
}

PJ_COORD pj_fwd4d (PJ_COORD coo, PJ *P) {
    int last_errno = proj_errno_reset(P);

if (!P->skip_fwd_prepare)
        coo = fwd_prepare (P, coo);
    if (HUGE_VAL==coo.v[0])
        return proj_coord_error ();

/* Call the highest dimensional converter available */
    if (P->fwd4d)
        coo = P->fwd4d (coo, P);
    else if (P->fwd3d)
        coo.xyz  =  P->fwd3d (coo.lpz, P);
    else if (P->fwd)
        coo.xy  =  P->fwd (coo.lp, P);
    else {
        proj_errno_set (P, EINVAL);
        return proj_coord_error ();
    }
    if (HUGE_VAL==coo.v[0])
        return proj_coord_error ();

if (!P->skip_fwd_finalize)
        coo = fwd_finalize (P, coo);

return error_or_coord(P, coo, last_errno);
}