EVOLUTION-MANAGER

Edit File: URIDNSBL.pm

# <@LICENSE> # Licensed to the Apache Software Foundation (ASF) under one or more # contributor license agreements. See the NOTICE file distributed with # this work for additional information regarding copyright ownership. # The ASF licenses this file to you under the Apache License, Version 2.0 # (the "License"); you may not use this file except in compliance with # the License. You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # </@LICENSE> =head1 NAME URIDNSBL - look up URLs against DNS blocklists =head1 SYNOPSIS loadplugin Mail::SpamAssassin::Plugin::URIDNSBL uridnsbl URIBL_SBLXBL sbl-xbl.spamhaus.org. TXT =head1 DESCRIPTION This works by analysing message text and HTML for URLs, extracting host names from those, then querying various DNS blocklists for either: IP addresses of these hosts (uridnsbl,a) or their nameservers (uridnsbl,ns), or domain names of these hosts (urirhsbl), or domain names of their nameservers (urinsrhsbl, urifullnsrhsbl). =head1 USER SETTINGS =over 4 =item skip_uribl_checks ( 0 | 1 ) (default: 0) Turning on the skip_uribl_checks setting will disable the URIDNSBL plugin. By default, SpamAssassin will run URI DNSBL checks. Individual URI blocklists may be disabled selectively by setting a score of a corresponding rule to 0 or through the uridnsbl_skip_domain parameter. See also a related configuration parameter skip_rbl_checks, which controls the DNSEval plugin (documented in the Conf man page). =back =over 4 =item uridnsbl_skip_domain domain1 domain2 ... Specify a domain, or a number of domains, which should be skipped for the URIBL checks. This is very useful to specify very common domains which are not going to be listed in URIBLs. =back =over 4 =item clear_uridnsbl_skip_domain [domain1 domain2 ...] If no argument is given, then clears the entire list of domains declared by I<uridnsbl_skip_domain> configuration directives so far. Any subsequent I<uridnsbl_skip_domain> directives will start creating a new list of skip domains. When given a list of domains as arguments, only the specified domains are removed from the list of skipped domains. =back =head1 RULE DEFINITIONS AND PRIVILEGED SETTINGS =over 4 =item uridnsbl NAME_OF_RULE dnsbl_zone lookuptype Specify a lookup. C<NAME_OF_RULE> is the name of the rule to be used, C<dnsbl_zone> is the zone to look up IPs in, and C<lookuptype> is the type of lookup (B<TXT> or B<A>). Note that you must also define a body-eval rule calling C<check_uridnsbl()> to use this. This works by collecting domain names from URLs and querying DNS blocklists with an IP address of host names found in URLs or with IP addresses of their name servers, according to tflags as follows. If the corresponding body rule has a tflag 'a', the DNS blocklist will be queried with an IP address of a host found in URLs. If the corresponding body rule has a tflag 'ns', DNS will be queried for name servers (NS records) of a domain name found in URLs, then these name server names will be resolved to their IP addresses, which in turn will be sent to DNS blocklist. Tflags directive may specify either 'a' or 'ns' or both flags. In absence of any of these two flags, a default is a 'ns', which is compatible with pre-3.4 versions of SpamAssassin. The choice of tflags must correspond to the policy and expected use of each DNS blocklist and is normally not a local decision. As an example, a blocklist expecting queries resulting from an 'a' tflag is a "black_a.txt" ( http://www.uribl.com/datasets.shtml ). Example: uridnsbl URIBL_SBLXBL sbl-xbl.spamhaus.org. TXT body URIBL_SBLXBL eval:check_uridnsbl('URIBL_SBLXBL') describe URIBL_SBLXBL Contains a URL listed in the SBL/XBL blocklist tflags URIBL_SBLXBL net ns =item uridnssub NAME_OF_RULE dnsbl_zone lookuptype subtest Specify a DNSBL-style domain lookup with a sub-test. C<NAME_OF_RULE> is the name of the rule to be used, C<dnsbl_zone> is the zone to look up IPs in, and C<lookuptype> is the type of lookup (B<TXT> or B<A>). Tflags 'ns' and 'a' on a corresponding body rule are recognized and have the same meaning as in the uridnsbl directive. C<subtest> is a sub-test to run against the returned data. The sub-test may be in one of the following forms: m, n1-n2, or n/m, where n,n1,n2,m can be any of: decimal digits, 0x followed by up to 8 hexadecimal digits, or an IPv4 address in quad-dot form. The 'A' records (IPv4 dotted address) as returned by DNSBLs lookups are converted into a numerical form (r) and checked against the specified sub-test as follows: for a range n1-n2 the following must be true: (r >= n1 && r <= n2); for a n/m form the following must be true: (r & m) == (n & m); for a single value in quad-dot form the following must be true: r == n; for a single decimal or hex form the following must be true: ((r & n) != 0) && ((r & 0xff000000) == 0x7f000000), i.e. within 127.0.0.0/8 Some typical examples of a sub-test are: 127.0.1.2, 127.0.1.20-127.0.1.39, 127.0.1.0/255.255.255.0, 0.0.0.16/0.0.0.16, 0x10/0x10, 16, 0x10 . Note that, as with C<uridnsbl>, you must also define a body-eval rule calling C<check_uridnsbl()> to use this. Example: uridnssub URIBL_DNSBL_4 dnsbl.example.org. A 127.0.0.4 uridnssub URIBL_DNSBL_8 dnsbl.example.org. A 8 =item urirhsbl NAME_OF_RULE rhsbl_zone lookuptype Specify a RHSBL-style domain lookup. C<NAME_OF_RULE> is the name of the rule to be used, C<rhsbl_zone> is the zone to look up domain names in, and C<lookuptype> is the type of lookup (B<TXT> or B<A>). Note that you must also define a body-eval rule calling C<check_uridnsbl()> to use this. An RHSBL zone is one where the domain name is looked up, as a string; e.g. a URI using the domain C<foo.com> will cause a lookup of C<foo.com.uriblzone.net>. Note that hostnames are stripped from the domain used in the URIBL lookup, so the domain C<foo.bar.com> will look up C<bar.com.uriblzone.net>, and C<foo.bar.co.uk> will look up C<bar.co.uk.uriblzone.net>. If an URI consists of an IP address instead of a hostname, the IP address is looked up (using the standard reversed quads method) in each C<rhsbl_zone>. Example: urirhsbl URIBL_RHSBL rhsbl.example.org. TXT =item urirhssub NAME_OF_RULE rhsbl_zone lookuptype subtest Specify a RHSBL-style domain lookup with a sub-test. C<NAME_OF_RULE> is the name of the rule to be used, C<rhsbl_zone> is the zone to look up domain names in, and C<lookuptype> is the type of lookup (B<TXT> or B<A>). C<subtest> is a sub-test to run against the returned data. The sub-test may be in one of the following forms: m, n1-n2, or n/m, where n,n1,n2,m can be any of: decimal digits, 0x followed by up to 8 hexadecimal digits, or an IPv4 address in quad-dot form. The 'A' records (IPv4 dotted address) as returned by DNSBLs lookups are converted into a numerical form (r) and checked against the specified sub-test as follows: for a range n1-n2 the following must be true: (r >= n1 && r <= n2); for a n/m form the following must be true: (r & m) == (n & m); for a single value in quad-dot form the following must be true: r == n; for a single decimal or hex form the following must be true: ((r & n) != 0) && ((r & 0xff000000) == 0x7f000000), i.e. within 127.0.0.0/8 Some typical examples of a sub-test are: 127.0.1.2, 127.0.1.20-127.0.1.39, 127.2.3.0/255.255.255.0, 0.0.0.16/0.0.0.16, 0x10/0x10, 16, 0x10 . Note that, as with C<urirhsbl>, you must also define a body-eval rule calling C<check_uridnsbl()> to use this. Example: urirhssub URIBL_RHSBL_4 rhsbl.example.org. A 127.0.0.4 urirhssub URIBL_RHSBL_8 rhsbl.example.org. A 8 =item urinsrhsbl NAME_OF_RULE rhsbl_zone lookuptype Perform a RHSBL-style domain lookup against the contents of the NS records for each URI. In other words, a URI using the domain C<foo.com> will cause an NS lookup to take place; assuming that domain has an NS of C<ns0.bar.com>, that will cause a lookup of C<bar.com.uriblzone.net>. Note that hostnames are stripped from both the domain used in the URI, and the domain in the lookup. C<NAME_OF_RULE> is the name of the rule to be used, C<rhsbl_zone> is the zone to look up domain names in, and C<lookuptype> is the type of lookup (B<TXT> or B<A>). Note that, as with C<urirhsbl>, you must also define a body-eval rule calling C<check_uridnsbl()> to use this. =item urinsrhssub NAME_OF_RULE rhsbl_zone lookuptype subtest Specify a RHSBL-style domain-NS lookup, as above, with a sub-test. C<NAME_OF_RULE> is the name of the rule to be used, C<rhsbl_zone> is the zone to look up domain names in, and C<lookuptype> is the type of lookup (B<TXT> or B<A>). C<subtest> is the sub-test to run against the returned data; see <urirhssub>. Note that, as with C<urirhsbl>, you must also define a body-eval rule calling C<check_uridnsbl()> to use this. =item urifullnsrhsbl NAME_OF_RULE rhsbl_zone lookuptype Perform a RHSBL-style domain lookup against the contents of the NS records for each URI. In other words, a URI using the domain C<foo.com> will cause an NS lookup to take place; assuming that domain has an NS of C<ns0.bar.com>, that will cause a lookup of C<ns0.bar.com.uriblzone.net>. Note that hostnames are stripped from the domain used in the URI. C<NAME_OF_RULE> is the name of the rule to be used, C<rhsbl_zone> is the zone to look up domain names in, and C<lookuptype> is the type of lookup (B<TXT> or B<A>). Note that, as with C<urirhsbl>, you must also define a body-eval rule calling C<check_uridnsbl()> to use this. =item urifullnsrhssub NAME_OF_RULE rhsbl_zone lookuptype subtest Specify a RHSBL-style domain-NS lookup, as above, with a sub-test. C<NAME_OF_RULE> is the name of the rule to be used, C<rhsbl_zone> is the zone to look up domain names in, and C<lookuptype> is the type of lookup (B<TXT> or B<A>). C<subtest> is the sub-test to run against the returned data; see <urirhssub>. Note that, as with C<urirhsbl>, you must also define a body-eval rule calling C<check_uridnsbl()> to use this. =item tflags NAME_OF_RULE ips_only Only URIs containing IP addresses as the "host" component will be matched against the named "urirhsbl"/"urirhssub" rule. =item tflags NAME_OF_RULE domains_only Only URIs containing a non-IP-address "host" component will be matched against the named "urirhsbl"/"urirhssub" rule. =item tflags NAME_OF_RULE ns The 'ns' flag may be applied to rules corresponding to uridnsbl and uridnssub directives. Host names from URLs will be mapped to their name server IP addresses (a NS lookup followed by an A lookup), which in turn will be sent to blocklists. This is a default when neither 'a' nor 'ns' flags are specified. =item tflags NAME_OF_RULE a The 'a' flag may be applied to rules corresponding to uridnsbl and uridnssub directives. Host names from URLs will be mapped to their IP addresses, which will be sent to blocklists. When both 'ns' and 'a' flags are specified, both queries will be performed. =back =head1 ADMINISTRATOR SETTINGS =over 4 =item uridnsbl_max_domains N (default: 20) The maximum number of domains to look up. =back =head1 NOTES The C<uridnsbl_timeout> option has been obsoleted by the C<rbl_timeout> option. See the C<Mail::SpamAssassin::Conf> POD for details on C<rbl_timeout>. =cut package Mail::SpamAssassin::Plugin::URIDNSBL; use Mail::SpamAssassin::Plugin; use Mail::SpamAssassin::Constants qw(:ip); use Mail::SpamAssassin::Util; use Mail::SpamAssassin::Util::RegistrarBoundaries; use Mail::SpamAssassin::Logger; use strict; use warnings; use bytes; use re 'taint'; use vars qw(@ISA); @ISA = qw(Mail::SpamAssassin::Plugin); use constant LOG_COMPLETION_TIMES => 0; # constructor sub new { my $class = shift; my $samain = shift; # some boilerplate... $class = ref($class) || $class; my $self = $class->SUPER::new($samain); bless ($self, $class); # this can be effectively global, at least in each process, safely $self->{finished} = { }; $self->register_eval_rule ("check_uridnsbl"); $self->set_config($samain->{conf}); return $self; } # this is just a placeholder; in fact the results are dealt with later sub check_uridnsbl { return 0; } # --------------------------------------------------------------------------- # once the metadata is parsed, we can access the URI list. So start off # the lookups here! sub parsed_metadata { my ($self, $opts) = @_; my $pms = $opts->{permsgstatus}; my $conf = $pms->{conf}; return 0 if $conf->{skip_uribl_checks}; if (!$pms->is_dns_available()) { $self->{dns_not_available} = 1; return 0; } else { # due to re-testing dns may become available after being unavailable # DOS: I don't think dns_not_available is even used anymore $self->{dns_not_available} = 0; } $pms->{'uridnsbl_activerules'} = { }; $pms->{'uridnsbl_hits'} = { }; $pms->{'uridnsbl_seen_lookups'} = { }; # only hit DNSBLs for active rules (defined and score != 0) $pms->{'uridnsbl_active_rules_rhsbl'} = { }; $pms->{'uridnsbl_active_rules_rhsbl_ipsonly'} = { }; $pms->{'uridnsbl_active_rules_rhsbl_domsonly'} = { }; $pms->{'uridnsbl_active_rules_nsrhsbl'} = { }; $pms->{'uridnsbl_active_rules_fullnsrhsbl'} = { }; $pms->{'uridnsbl_active_rules_nsrevipbl'} = { }; $pms->{'uridnsbl_active_rules_arevipbl'} = { }; foreach my $rulename (keys %{$conf->{uridnsbls}}) { next unless ($conf->is_rule_active('body_evals',$rulename)); my $rulecf = $conf->{uridnsbls}->{$rulename}; my $tflags = $conf->{tflags}->{$rulename}; $tflags = '' if !defined $tflags; my %tfl = map { ($_,1) } split(' ',$tflags); my $is_rhsbl = $rulecf->{is_rhsbl}; if ( $is_rhsbl && $tfl{'ips_only'}) { $pms->{uridnsbl_active_rules_rhsbl_ipsonly}->{$rulename} = 1; } elsif ($is_rhsbl && $tfl{'domains_only'}) { $pms->{uridnsbl_active_rules_rhsbl_domsonly}->{$rulename} = 1; } elsif ($is_rhsbl) { $pms->{uridnsbl_active_rules_rhsbl}->{$rulename} = 1; } elsif ($rulecf->{is_fullnsrhsbl}) { $pms->{uridnsbl_active_rules_fullnsrhsbl}->{$rulename} = 1; } elsif ($rulecf->{is_nsrhsbl}) { $pms->{uridnsbl_active_rules_nsrhsbl}->{$rulename} = 1; } else { # just a plain dnsbl rule (IP based), not a RHS rule (name-based) if ($tfl{'a'}) { # tflag 'a' explicitly $pms->{uridnsbl_active_rules_arevipbl}->{$rulename} = 1; } if ($tfl{'ns'} || !$tfl{'a'}) { # tflag 'ns' explicitly, or default $pms->{uridnsbl_active_rules_nsrevipbl}->{$rulename} = 1; } } } # get all domains in message # don't keep dereferencing this my $skip_domains = $conf->{uridnsbl_skip_domains}; $skip_domains = {} if !$skip_domains; # list of hashes to use in order my @uri_ordered; # Generate the full list of html-parsed domains. my $uris = $pms->get_uri_detail_list(); # go from uri => info to uri_ordered # 0: a # 1: form # 2: img # 3: !a_empty # 4: parsed # 5: a_empty while (my($uri, $info) = each %{$uris}) { # we want to skip mailto: uris next if ($uri =~ /^mailto:/i); # no hosts/domains were found via this uri, so skip next unless ($info->{hosts}); my $entry = 3; if ($info->{types}->{a}) { $entry = 5; # determine a vs a_empty foreach my $at (@{$info->{anchor_text}}) { if (length $at) { $entry = 0; last; } } } elsif ($info->{types}->{form}) { $entry = 1; } elsif ($info->{types}->{img}) { $entry = 2; } elsif ($info->{types}->{parsed} && (keys %{$info->{types}} == 1)) { $entry = 4; } # take the usable domains and add them to the ordered list while (my($host,$domain) = each( %{$info->{hosts}} )) { if ($skip_domains->{$domain}) { dbg("uridnsbl: domain $domain in skip list, host $host"); } else { # use hostname as a key, and drag along the stripped domain name part $uri_ordered[$entry]->{$host} = $domain; } } } # at this point, @uri_ordered is an ordered array of hostname hashes my %hostlist; # keys are host names, values are their domain parts my $umd = $conf->{uridnsbl_max_domains}; while (keys %hostlist < $umd && @uri_ordered) { my $array = shift @uri_ordered; next unless $array; # run through and find the new domains in this grouping my @hosts = grep(!$hostlist{$_}, keys %{$array}); next unless @hosts; # the new hosts are all useful, just add them in if (keys(%hostlist) + @hosts <= $umd) { foreach my $host (@hosts) { $hostlist{$host} = $array->{$host}; } } else { dbg("uridnsbl: more than $umd URIs, picking a subset"); # trim down to a limited number - pick randomly while (@hosts && keys %hostlist < $umd) { my $r = int rand(scalar @hosts); my $picked_host = splice(@hosts, $r, 1); $hostlist{$picked_host} = $array->{$picked_host}; } } } my @hnames = keys %hostlist; $pms->set_tag('URIHOSTS', @hnames == 1 ? $hnames[0] : \@hnames) if @hnames; my @dnames = values %hostlist; $pms->set_tag('URIDOMAINS', @dnames == 1 ? $dnames[0] : \@dnames) if @dnames; # and query $self->query_hosts_or_domains($pms, \%hostlist); return 1; } # Accepts argument in one of the following forms: m, n1-n2, or n/m, # where n,n1,n2,m can be any of: decimal digits, 0x followed by up to 8 # hexadecimal digits, or an IPv4 address in quad-dot form. The argument # is checked for syntax (undef is returned on syntax errors), hex numbers # are converted to decimal, and quad-dot is converted to decimal, then # reassembled into original string delimited by '-' or '/'. As a special # backward compatibility measure, a single quad-dot (with no second number) # is converted into n-n, to distinguish it from a traditional mask-only form. # # In practice, arguments like the following are anticipated: # 127.0.1.2 (same as 127.0.1.2-127.0.1.2 or 127.0.1.2/255.255.255.255) # 127.0.1.20-127.0.1.39 (= 0x7f000114-0x7f000127 or 2130706708-2130706727) # 0.0.0.16/0.0.0.16 (same as 0x10/0x10 or 16/0x10 or 16/16) # 16 (traditional style mask-only, same as 0x10) # sub parse_and_canonicalize_subtest { my($subtest) = @_; my $digested_subtest; local($1,$2,$3); if ($subtest =~ m{^ ([^/-]+) (?: ([/-]) (.+) )? \z}xs) { my($n1,$delim,$n2) = ($1,$2,$3); my $any_quad_dot; for ($n1,$n2) { if (!defined $_) { # ok, $n2 may not exist } elsif (/^\d{1,10}\z/) { # ok, already a decimal number } elsif (/^0x[0-9a-zA-Z]{1,8}\z/) { $_ = hex($_); # hex -> number } elsif (/^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}\z/) { $_ = Mail::SpamAssassin::Util::my_inet_aton($_); # quad-dot -> number $any_quad_dot = 1; } else { return; } } $digested_subtest = defined $n2 ? $n1.$delim.$n2 : $any_quad_dot ? $n1.'-'.$n1 : "$n1"; } return $digested_subtest; } sub set_config { my($self, $conf) = @_; my @cmds; push(@cmds, { setting => 'skip_uribl_checks', default => 0, type => $Mail::SpamAssassin::Conf::CONF_TYPE_BOOL, }); push(@cmds, { setting => 'uridnsbl_max_domains', is_admin => 1, default => 20, type => $Mail::SpamAssassin::Conf::CONF_TYPE_NUMERIC, }); push (@cmds, { setting => 'uridnsbl', is_priv => 1, code => sub { my ($self, $key, $value, $line) = @_; local($1,$2,$3); if ($value =~ /^(\S+)\s+(\S+)\s+(\S+)$/) { my $rulename = $1; my $zone = $2; my $type = $3; $zone =~ s/\.\z//; # strip a redundant trailing dot $self->{uridnsbls}->{$rulename} = { zone => $zone, type => $type, is_rhsbl => 0 }; } elsif ($value =~ /^$/) { return $Mail::SpamAssassin::Conf::MISSING_REQUIRED_VALUE; } else { return $Mail::SpamAssassin::Conf::INVALID_VALUE; } } }); push (@cmds, { setting => 'uridnssub', is_priv => 1, code => sub { my ($self, $key, $value, $line) = @_; local($1,$2,$3,$4); if ($value =~ /^(\S+)\s+(\S+)\s+(\S+)\s+(.*?)\s*$/) { my $rulename = $1; my $zone = $2; my $type = $3; my $subrule = $4; $zone =~ s/\.\z//; # strip a redundant trailing dot $subrule = parse_and_canonicalize_subtest($subrule); defined $subrule or return $Mail::SpamAssassin::Conf::INVALID_VALUE; $self->{uridnsbls}->{$rulename} = { zone => $zone, type => $type, is_rhsbl => 0, subtest => $subrule, }; } elsif ($value =~ /^$/) { return $Mail::SpamAssassin::Conf::MISSING_REQUIRED_VALUE; } else { return $Mail::SpamAssassin::Conf::INVALID_VALUE; } } }); push (@cmds, { setting => 'urirhsbl', is_priv => 1, code => sub { my ($self, $key, $value, $line) = @_; local($1,$2,$3); if ($value =~ /^(\S+)\s+(\S+)\s+(\S+)$/) { my $rulename = $1; my $zone = $2; my $type = $3; $zone =~ s/\.\z//; # strip a redundant trailing dot $self->{uridnsbls}->{$rulename} = { zone => $zone, type => $type, is_rhsbl => 1 }; } elsif ($value =~ /^$/) { return $Mail::SpamAssassin::Conf::MISSING_REQUIRED_VALUE; } else { return $Mail::SpamAssassin::Conf::INVALID_VALUE; } } }); push (@cmds, { setting => 'urirhssub', is_priv => 1, code => sub { my ($self, $key, $value, $line) = @_; local($1,$2,$3,$4); if ($value =~ /^(\S+)\s+(\S+)\s+(\S+)\s+(.*?)\s*$/) { my $rulename = $1; my $zone = $2; my $type = $3; my $subrule = $4; $zone =~ s/\.\z//; # strip a redundant trailing dot $subrule = parse_and_canonicalize_subtest($subrule); defined $subrule or return $Mail::SpamAssassin::Conf::INVALID_VALUE; $self->{uridnsbls}->{$rulename} = { zone => $zone, type => $type, is_rhsbl => 1, subtest => $subrule, }; } elsif ($value =~ /^$/) { return $Mail::SpamAssassin::Conf::MISSING_REQUIRED_VALUE; } else { return $Mail::SpamAssassin::Conf::INVALID_VALUE; } } }); push (@cmds, { setting => 'urinsrhsbl', is_priv => 1, code => sub { my ($self, $key, $value, $line) = @_; local($1,$2,$3); if ($value =~ /^(\S+)\s+(\S+)\s+(\S+)$/) { my $rulename = $1; my $zone = $2; my $type = $3; $zone =~ s/\.\z//; # strip a redundant trailing dot $self->{uridnsbls}->{$rulename} = { zone => $zone, type => $type, is_nsrhsbl => 1 }; } elsif ($value =~ /^$/) { return $Mail::SpamAssassin::Conf::MISSING_REQUIRED_VALUE; } else { return $Mail::SpamAssassin::Conf::INVALID_VALUE; } } }); push (@cmds, { setting => 'urinsrhssub', is_priv => 1, code => sub { my ($self, $key, $value, $line) = @_; local($1,$2,$3,$4); if ($value =~ /^(\S+)\s+(\S+)\s+(\S+)\s+(.*?)\s*$/) { my $rulename = $1; my $zone = $2; my $type = $3; my $subrule = $4; $zone =~ s/\.\z//; # strip a redundant trailing dot $subrule = parse_and_canonicalize_subtest($subrule); defined $subrule or return $Mail::SpamAssassin::Conf::INVALID_VALUE; $self->{uridnsbls}->{$rulename} = { zone => $zone, type => $type, is_nsrhsbl => 1, subtest => $subrule, }; } elsif ($value =~ /^$/) { return $Mail::SpamAssassin::Conf::MISSING_REQUIRED_VALUE; } else { return $Mail::SpamAssassin::Conf::INVALID_VALUE; } } }); push (@cmds, { setting => 'urifullnsrhsbl', is_priv => 1, code => sub { my ($self, $key, $value, $line) = @_; local($1,$2,$3); if ($value =~ /^(\S+)\s+(\S+)\s+(\S+)$/) { my $rulename = $1; my $zone = $2; my $type = $3; $zone =~ s/\.\z//; # strip a redundant trailing dot $self->{uridnsbls}->{$rulename} = { zone => $zone, type => $type, is_fullnsrhsbl => 1 }; } elsif ($value =~ /^$/) { return $Mail::SpamAssassin::Conf::MISSING_REQUIRED_VALUE; } else { return $Mail::SpamAssassin::Conf::INVALID_VALUE; } } }); push (@cmds, { setting => 'urifullnsrhssub', is_priv => 1, code => sub { my ($self, $key, $value, $line) = @_; local($1,$2,$3,$4); if ($value =~ /^(\S+)\s+(\S+)\s+(\S+)\s+(.*?)\s*$/) { my $rulename = $1; my $zone = $2; my $type = $3; my $subrule = $4; $zone =~ s/\.\z//; # strip a redundant trailing dot $subrule = parse_and_canonicalize_subtest($subrule); defined $subrule or return $Mail::SpamAssassin::Conf::INVALID_VALUE; $self->{uridnsbls}->{$rulename} = { zone => $zone, type => $type, is_fullnsrhsbl => 1, subtest => $subrule, }; } elsif ($value =~ /^$/) { return $Mail::SpamAssassin::Conf::MISSING_REQUIRED_VALUE; } else { return $Mail::SpamAssassin::Conf::INVALID_VALUE; } } }); push (@cmds, { setting => 'uridnsbl_skip_domain', default => {}, type => $Mail::SpamAssassin::Conf::CONF_TYPE_HASH_KEY_VALUE, code => sub { my ($self, $key, $value, $line) = @_; if ($value =~ /^$/) { return $Mail::SpamAssassin::Conf::MISSING_REQUIRED_VALUE; } foreach my $domain (split(/\s+/, $value)) { $self->{uridnsbl_skip_domains}->{lc $domain} = 1; } } }); push (@cmds, { setting => 'clear_uridnsbl_skip_domain', type => $Mail::SpamAssassin::Conf::CONF_TYPE_HASH_KEY_VALUE, code => sub { my ($self, $key, $value, $line) = @_; if (!defined $value || $value eq '') { # clear the entire list $self->{uridnsbl_skip_domains} = {}; } else { foreach my $domain (split(/\s+/, $value)) { delete $self->{uridnsbl_skip_domains}->{lc $domain}; } } } }); # obsolete push(@cmds, { setting => 'uridnsbl_timeout', code => sub { # not a lint_warn(), since it's pretty harmless and we don't want # to break stuff like sa-update warn("config: 'uridnsbl_timeout' is obsolete, use 'rbl_timeout' instead"); return 0; } }); $conf->{parser}->register_commands(\@cmds); } # --------------------------------------------------------------------------- sub query_hosts_or_domains { my ($self, $pms, $hosthash_ref) = @_; my $conf = $pms->{conf}; my $seen_lookups = $pms->{'uridnsbl_seen_lookups'}; my $rhsblrules = $pms->{uridnsbl_active_rules_rhsbl}; my $rhsbliprules = $pms->{uridnsbl_active_rules_rhsbl_ipsonly}; my $rhsbldomrules = $pms->{uridnsbl_active_rules_rhsbl_domsonly}; my $nsrhsblrules = $pms->{uridnsbl_active_rules_nsrhsbl}; my $fullnsrhsblrules = $pms->{uridnsbl_active_rules_fullnsrhsbl}; my $nsreviprules = $pms->{uridnsbl_active_rules_nsrevipbl}; my $areviprules = $pms->{uridnsbl_active_rules_arevipbl}; while (my($host,$domain) = each(%$hosthash_ref)) { $domain = lc $domain; # just in case $host = lc $host; dbg("uridnsbl: considering host=$host, domain=$domain"); my $obj = { dom => $domain }; my ($is_ip, $single_dnsbl); if ($host =~ /^\d+\.\d+\.\d+\.\d+$/) { my $IPV4_ADDRESS = IPV4_ADDRESS; my $IP_PRIVATE = IP_PRIVATE; # only look up the IP if it is public and valid if ($host =~ /^$IPV4_ADDRESS$/o && $host !~ /^$IP_PRIVATE$/o) { my $obj = { dom => $host }; $self->lookup_dnsbl_for_ip($pms, $obj, $host); # and check the IP in RHSBLs too local($1,$2,$3,$4); if ($host =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/) { $domain = "$4.$3.$2.$1"; $single_dnsbl = 1; $is_ip = 1; } } } else { $single_dnsbl = 1; } if ($single_dnsbl) { # rule names which look up a domain in the basic RHSBL subset my @rhsblrules = keys %{$rhsblrules}; # and add the "domains_only" and "ips_only" subsets as appropriate if ($is_ip) { push @rhsblrules, keys %{$rhsbliprules}; } else { push @rhsblrules, keys %{$rhsbldomrules}; } foreach my $rulename (@rhsblrules) { my $rulecf = $conf->{uridnsbls}->{$rulename}; $self->lookup_single_dnsbl($pms, $obj, $rulename, $domain, $rulecf->{zone}, $rulecf->{type}); # note that these rules are now underway. important: unless the # rule hits, in the current design, these will not be considered # "finished" until harvest_dnsbl_queries() completes $pms->register_async_rule_start($rulename); } # perform NS+A or A queries to look up the domain in the non-RHSBL subset, # but only if there are active reverse-IP-URIBL rules if ($host !~ /^\d+\.\d+\.\d+\.\d+$/) { if ( !$seen_lookups->{'NS:'.$domain} && (%$nsreviprules || %$nsrhsblrules || %$fullnsrhsblrules) ) { $seen_lookups->{'NS:'.$domain} = 1; $self->lookup_domain_ns($pms, $obj, $domain); } if (%$areviprules && !$seen_lookups->{'A:'.$host}) { $seen_lookups->{'A:'.$host} = 1; my $obj = { dom => $host }; $self->lookup_a_record($pms, $obj, $host); $pms->register_async_rule_start($_) for keys %$areviprules; } } } } } # --------------------------------------------------------------------------- sub lookup_domain_ns { my ($self, $pms, $obj, $dom, $rulename) = @_; my $key = "NS:" . $dom; my $ent = { key => $key, zone => $dom, obj => $obj, type => "URI-NS", rulename => $rulename, }; # dig $dom ns $ent = $pms->{async}->bgsend_and_start_lookup( $dom, 'NS', undef, $ent, sub { my ($ent2,$pkt) = @_; $self->complete_ns_lookup($pms, $ent2, $pkt, $dom) }, master_deadline => $pms->{master_deadline} ); return $ent; } sub complete_ns_lookup { my ($self, $pms, $ent, $pkt, $dom) = @_; if (!$pkt) { # $pkt will be undef if the DNS query was aborted (e.g. timed out) dbg("uridnsbl: complete_ns_lookup aborted %s", $ent->{key}); return; } dbg("uridnsbl: complete_ns_lookup %s", $ent->{key}); my $conf = $pms->{conf}; my @answer = $pkt->answer; my $IPV4_ADDRESS = IPV4_ADDRESS; my $IP_PRIVATE = IP_PRIVATE; my $nsrhsblrules = $pms->{uridnsbl_active_rules_nsrhsbl}; my $fullnsrhsblrules = $pms->{uridnsbl_active_rules_fullnsrhsbl}; my $seen_lookups = $pms->{'uridnsbl_seen_lookups'}; my $j = 0; foreach my $rr (@answer) { $j++; my $str = $rr->string; next unless (defined($str) && defined($dom)); dbg("uridnsbl: got($j) NS for $dom: $str"); if ($str =~ /IN\s+NS\s+(\S+)/) { my $nsmatch = lc $1; $nsmatch =~ s/\.$//; my $nsrhblstr = $nsmatch; my $fullnsrhblstr = $nsmatch; if ($nsmatch =~ /^\d+\.\d+\.\d+\.\d+$/) { # only look up the IP if it is public and valid if ($nsmatch =~ /^$IPV4_ADDRESS$/o && $nsmatch !~ /^$IP_PRIVATE$/o) { $self->lookup_dnsbl_for_ip($pms, $ent->{obj}, $nsmatch); } $nsrhblstr = $nsmatch; } else { if (!$seen_lookups->{'A:'.$nsmatch}) { $seen_lookups->{'A:'.$nsmatch} = 1; $self->lookup_a_record($pms, $ent->{obj}, $nsmatch); } $nsrhblstr = Mail::SpamAssassin::Util::RegistrarBoundaries::trim_domain($nsmatch); } foreach my $rulename (keys %{$nsrhsblrules}) { my $rulecf = $conf->{uridnsbls}->{$rulename}; $self->lookup_single_dnsbl($pms, $ent->{obj}, $rulename, $nsrhblstr, $rulecf->{zone}, $rulecf->{type}); $pms->register_async_rule_start($rulename); } foreach my $rulename (keys %{$fullnsrhsblrules}) { my $rulecf = $conf->{uridnsbls}->{$rulename}; $self->lookup_single_dnsbl($pms, $ent->{obj}, $rulename, $fullnsrhblstr, $rulecf->{zone}, $rulecf->{type}); $pms->register_async_rule_start($rulename); } } } } # --------------------------------------------------------------------------- sub lookup_a_record { my ($self, $pms, $obj, $hname, $rulename) = @_; my $key = "A:" . $hname; my $ent = { key => $key, zone => $hname, obj => $obj, type => "URI-A", rulename => $rulename, }; # dig $hname a $ent = $pms->{async}->bgsend_and_start_lookup( $hname, 'A', undef, $ent, sub { my ($ent2,$pkt) = @_; $self->complete_a_lookup($pms, $ent2, $pkt, $hname) }, master_deadline => $pms->{master_deadline} ); return $ent; } sub complete_a_lookup { my ($self, $pms, $ent, $pkt, $hname) = @_; if (!$pkt) { # $pkt will be undef if the DNS query was aborted (e.g. timed out) dbg("uridnsbl: complete_a_lookup aborted %s", $ent->{key}); return; } dbg("uridnsbl: complete_a_lookup %s", $ent->{key}); my @answer = $pkt->answer; my $j = 0; foreach my $rr (@answer) { $j++; my $str = $rr->string; if (!defined $hname) { warn "complete_a_lookup-1: $j, (hname is undef), $str"; } elsif (!defined $str) { warn "complete_a_lookup-2: $j, $hname, (str is undef)"; next; } dbg("uridnsbl: complete_a_lookup got(%d) A for %s: %s", $j,$hname,$str); local $1; if ($str =~ /IN\s+A\s+(\S+)/) { $self->lookup_dnsbl_for_ip($pms, $ent->{obj}, $1); } } } # --------------------------------------------------------------------------- sub lookup_dnsbl_for_ip { my ($self, $pms, $obj, $ip) = @_; local($1,$2,$3,$4); $ip =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/; my $revip = "$4.$3.$2.$1"; my $conf = $pms->{conf}; my $tflags = $conf->{tflags}; my $cfns = $pms->{uridnsbl_active_rules_nsrevipbl}; my $cfa = $pms->{uridnsbl_active_rules_arevipbl}; foreach my $rulename (keys %$cfa, keys %$cfns) { my $rulecf = $conf->{uridnsbls}->{$rulename}; # ips_only/domains_only lookups should not act on this kind of BL next if defined $tflags->{$rulename} && $tflags->{$rulename} =~ /\b(?:ips_only|domains_only)\b/; $self->lookup_single_dnsbl($pms, $obj, $rulename, $revip, $rulecf->{zone}, $rulecf->{type}); } } sub lookup_single_dnsbl { my ($self, $pms, $obj, $rulename, $lookupstr, $dnsbl, $qtype) = @_; my $key = "DNSBL:" . $lookupstr . ':' . $dnsbl; my $ent = { key => $key, zone => $dnsbl, obj => $obj, type => 'URI-DNSBL', rulename => $rulename, }; $ent = $pms->{async}->bgsend_and_start_lookup( $lookupstr.".".$dnsbl, $qtype, undef, $ent, sub { my ($ent2,$pkt) = @_; $self->complete_dnsbl_lookup($pms, $ent2, $pkt) }, master_deadline => $pms->{master_deadline} ); return $ent; } sub complete_dnsbl_lookup { my ($self, $pms, $ent, $pkt) = @_; if (!$pkt) { # $pkt will be undef if the DNS query was aborted (e.g. timed out) dbg("uridnsbl: complete_dnsbl_lookup aborted %s %s", $ent->{rulename}, $ent->{key}); return; } dbg("uridnsbl: complete_dnsbl_lookup %s %s", $ent->{rulename}, $ent->{key}); my $conf = $pms->{conf}; my $zone = $ent->{zone}; my $dom = $ent->{obj}->{dom}; my $rulename = $ent->{rulename}; my $rulecf = $conf->{uridnsbls}->{$rulename}; my @subtests; my @answer = $pkt->answer; foreach my $rr (@answer) { my($rdatastr,$rdatanum); my $rr_type = $rr->type; if ($rr_type eq 'A') { $rdatastr = $rr->rdatastr; if ($rdatastr =~ m/^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$/) { $rdatanum = Mail::SpamAssassin::Util::my_inet_aton($rdatastr); } } elsif ($rr_type eq 'TXT') { # txtdata returns a non- zone-file-format encoded result, unlike rdatastr; # avoid space-separated RDATA <character-string> fields if possible; # txtdata provides a list of strings in list context since Net::DNS 0.69 $rdatastr = join('',$rr->txtdata); } else { next; } my $subtest = $rulecf->{subtest}; dbg("uridnsbl: %s . %s -> %s, %s%s", $dom, $zone, $rdatastr, $rulename, !defined $subtest ? '' : ', subtest:'.$subtest); my $match; if (!defined $subtest) { # this zone is a simple rule, not a set of subrules # skip any A record that isn't on 127/8 if ($rr_type eq 'A' && $rdatastr !~ /^127\./) { warn("uridnsbl: bogus rr for domain=$dom, rule=$rulename, id=" . $pkt->header->id." rr=".$rr->string); next; } $match = 1; } elsif ($subtest eq $rdatastr) { $match = 1; } elsif ($subtest =~ m{^ (\d+) (?: ([/-]) (\d+) )? \z}x) { my($n1,$delim,$n2) = ($1,$2,$3); $match = !defined $n2 ? ($rdatanum & $n1) && # mask only (($rdatanum & 0xff000000) == 0x7f000000) # 127/8 : $delim eq '-' ? $rdatanum >= $n1 && $rdatanum <= $n2 # range : $delim eq '/' ? ($rdatanum & $n2) == ($n1 & $n2) # value/mask : 0; dbg("uridnsbl: %s . %s -> %s, %s, %08x %s %s", $dom, $zone, $rdatastr, $rulename, $rdatanum, !defined $n2 ? sprintf('& %08x', $n1) : $n1 == $n2 ? sprintf('== %08x', $n1) : sprintf('%08x%s%08x', $n1,$delim,$n2), $match ? 'match' : 'no'); } $self->got_dnsbl_hit($pms, $ent, $rdatastr, $dom, $rulename) if $match; } } sub got_dnsbl_hit { my ($self, $pms, $ent, $str, $dom, $rulename) = @_; $str =~ s/\s+/ /gs; # long whitespace => short dbg("uridnsbl: domain \"$dom\" listed ($rulename): $str"); if (!defined $pms->{uridnsbl_hits}->{$rulename}) { $pms->{uridnsbl_hits}->{$rulename} = { }; }; $pms->{uridnsbl_hits}->{$rulename}->{$dom} = 1; if ( $pms->{uridnsbl_active_rules_nsrevipbl}->{$rulename} || $pms->{uridnsbl_active_rules_arevipbl}->{$rulename} || $pms->{uridnsbl_active_rules_nsrhsbl}->{$rulename} || $pms->{uridnsbl_active_rules_fullnsrhsbl}->{$rulename} || $pms->{uridnsbl_active_rules_rhsbl}->{$rulename} || $pms->{uridnsbl_active_rules_rhsbl_ipsonly}->{$rulename} || $pms->{uridnsbl_active_rules_rhsbl_domsonly}->{$rulename}) { # TODO: this needs to handle multiple domain hits per rule $pms->clear_test_state(); my $uris = join (' ', keys %{$pms->{uridnsbl_hits}->{$rulename}}); $pms->test_log ("URIs: $uris"); $pms->got_hit ($rulename, ""); # note that this rule has completed (since it got at least 1 hit) $pms->register_async_rule_finish($rulename); } } # --------------------------------------------------------------------------- # capability checks for "if can()": # sub has_tflags_domains_only { 1 } sub has_subtest_for_ranges { 1 } sub has_uridnsbl_for_a { 1 } # uridnsbl rules recognize tflags 'a' and 'ns' 1;