EVOLUTION-MANAGER

Edit File: rpc-grind.nse

local stdnse = require "stdnse"
local nmap = require "nmap"
local rpc = require "rpc"
local datafiles = require "datafiles"
local bin = require "bin"
local math = require "math"
local io = require "io"
local coroutine = require "coroutine"
local table = require "table"

description = [[
Fingerprints the target RPC port to extract the target service, RPC number and version.

The script works by sending RPC Null call requests with a random high version
unsupported number to the target service with iterated over RPC program numbers
from the nmap-rpc file and check for replies from the target port.
A reply with a RPC accept state 2 (Remote can't support version) means that we
the request sent the matching program number, and we proceed to extract the
supported versions. A reply with an accept state RPC accept state 1 (remote
hasn't exported program) means that we have sent the incorrect program number.
Any other accept state is an incorrect behaviour.
]]

---
-- @args rpc-grind.threads Number of grinding threads. Defaults to <code>4</code>
--
-- @usage
-- nmap -sV <target>
-- nmap --script rpc-grind <target>
-- nmap --script rpc-grind --script-args 'rpc-grind.threads=8' -p <targetport>
-- <target>
--
--@output
--PORT      STATE SERVICE          VERSION
--53344/udp open  walld (walld V1) 1 (RPC #100008)
--

author = "Hani Benhabiles"

license = "Same as Nmap--See http://nmap.org/book/man-legal.html"

categories = {"version"}

portrule = function(host, port)
    -- Do not run for excluded ports
    if (nmap.port_is_excluded(port.number, port.protocol)) then
	return false
    end
    if port.service ~= nil and port.version.service_dtype ~= "table" and port.service ~= 'rpcbind' then
        -- Exclude services that have already been detected as something
        -- different than rpcbind.
        return false
    end
    return true
end

--- Function that determines if the target port of host uses RPC protocol.
--@param host Host table as commonly used in Nmap.
--@param port Port table as commonly used in Nmap.
--@return status boolean True if target port uses RPC protocol, false else.
local isRPC = function(host, port)
    -- If rpcbind is already set up by -sV
    -- which does practically the same check as in the "else" part.
    -- The nmap-services-probe entry "rpcbind" is not correctly true, and should
    -- be changed to something like "sunrpc"
    if port.service == 'rpcbind' then
        return true
    else
        -- this check is important if we didn't run the scan with -sV.
        -- If we run the scan with -sV, this check shouldn't return true as it is pretty much similar
        -- to the "rpcbind" service probe in nmap-service-probes.
        local rpcConn, status, err, data, rxid, msgtype, _

-- Create new socket
        -- rpcbind is not really important, we could have used another protocol from rpc.lua
        -- such as nfs or mountd. Same thing for version 2.
        rpcConn = rpc.Comm:new("rpcbind", 2)
        status, err = rpcConn:Connect(host, port)
        if not status then
            stdnse.print_debug("%s: %s", SCRIPT_NAME, err)
            return
        end

-- Send packet
        local xid = math.random(1234567890)
        data = rpcConn:EncodePacket(xid)
        status, err = rpcConn:SendPacket(data)
        if not status then
            stdnse.print_debug("%s SendPacket(): %s", SCRIPT_NAME, err)
            return
        end

-- And check response
        status, data = rpcConn:ReceivePacket()
        if not status then
            stdnse.print_debug("%s: isRPC didn't receive response.", SCRIPT_NAME)
            return
        else
            -- If we got response, set port to open
            nmap.set_port_state(host, port, "open")

_, rxid = bin.unpack(">I", data, 1)
            _, msgtype = bin.unpack(">I", data, 5)
            -- If response XID does match request XID
            -- and message type equals 1 (REPLY) then
            -- it is a RPC port.
            if rxid == xid and msgtype == 1 then
                return true
            end
        end
    end
    stdnse.print_debug("%s: RPC checking function response data is not RPC.", SCRIPT_NAME)
end

-- Function that iterates over the nmap-rpc file and
-- returns program name and number pairs.
-- @return name Name of the RPC service.
-- @return number RPC number of the matching service name.
local rpcIterator = function()
    -- Check if nmap-rpc file is present.
    local path = nmap.fetchfile("nmap-rpc")
    if not path then
        stdnse.print_debug("%s: Could not find nmap-rpc file.", SCRIPT_NAME)
        return false
    end

-- And is readable
    local nmaprpc, _, _ = io.open( path, "r" )
    if not nmaprpc then
        stdnse.print_debug("%s: Could not open nmap-rpc for reading.", SCRIPT_NAME)
        return false
    end

return function()
        while true do
            local line = nmaprpc:read()
            if not line then
                break
            end
            -- Now, we parse lines for meaningful ones
            local name, number = line:match("^%s*([^%s#]+)%s+(%d+)")
            -- And return program name and number
            if name and number then
                return name, tonumber(number)
            end
        end
    end
end

--- Function that sends RPC null commands with a random version number and
-- iterated over program numbers and checks the response for a sign that the
-- sent program number is the matching one for the target service.
-- @param host Host table as commonly used in Nmap.
-- @param port Port table as commonly used in Nmap.
-- @param iterator Iterator function that returns program name and number pairs.
-- @param result table to put result into.
local rpcGrinder = function(host, port, iterator, result)
    local condvar = nmap.condvar(result)
    local rpcConn, version, xid, status, response, packet, err, data, _

xid = math.random(123456789)
      -- We use a random, most likely unsupported version so that
    -- we also trigger min and max version disclosure for the target service.
    version = math.random(12345, 123456789)
    rpcConn = rpc.Comm:new("rpcbind", version)
    rpcConn:SetCheckProgVer(false)
    status, err = rpcConn:Connect(host, port)

if not status then
        stdnse.print_debug("%s Connect(): %s", SCRIPT_NAME, err)
        condvar "signal";
        return
    end
    for program, number in iterator do
        -- No need to continue further if we found the matching service.
        if #result > 0 then
            break
        end

xid = xid + 1 -- XiD increased by 1 each time (from old RPC grind) <= Any important reason for that?
        rpcConn:SetProgID(number)
        packet = rpcConn:EncodePacket(xid)
        status, err = rpcConn:SendPacket(packet)
        if not status then
            stdnse.print_debug("%s SendPacket(): %s", SCRIPT_NAME, err)
            condvar "signal";
            return
        end

status, data = rpcConn:ReceivePacket()
        if not status then
            stdnse.print_debug("%s ReceivePacket(): %s", SCRIPT_NAME, data)
            condvar "signal";
            return
        end

_,response = rpcConn:DecodeHeader(data, 1)
        if type(response) == 'table' then
            if xid ~= response.xid then
                -- Shouldn't happen.
                stdnse.print_debug("%s: XID mismtach.", SCRIPT_NAME)
            end
            -- Look at accept state
            -- Not supported version means that we used the right program number
            if response.accept_state == rpc.Portmap.AcceptState.PROG_MISMATCH then
                result.program = program
                result.number = number
                _, result.highver = bin.unpack(">I", data, #data - 3)
                _, result.lowver = bin.unpack(">I", data, #data - 7)
                table.insert(result, true) -- To make #result > 1

-- Otherwise, an Accept state other than Program unavailable is not normal behaviour.
            elseif response.accept_state ~= rpc.Portmap.AcceptState.PROG_UNAVAIL then
                stdnse.print_debug("%s: returned %s accept state for %s program number.",SCRIPT_NAME, response.accept_state, number)
            end
        end
    end
    condvar "signal";
    return result
end

action = function(host, port)
    local result, lthreads = {}, {}

if not isRPC(host, port) then
        stdnse.print_debug("Target port %s is not a RPC port.", port.number)
        return
    end
    local threads = tonumber(stdnse.get_script_args(SCRIPT_NAME .. ".threads")) or 4

local iterator = rpcIterator()
    if not iterator then
        return
    end
    -- And now, exec our grinder
    for i = 1,threads do
        local co = stdnse.new_thread(rpcGrinder, host, port, iterator, result)
        lthreads[co] = true
    end

local condvar = nmap.condvar(result)
    repeat
        for thread in pairs(lthreads) do
            if coroutine.status(thread) == "dead" then
                lthreads[thread] = nil
            end
        end
        if ( next(lthreads) ) then
            condvar "wait";
        end
    until next(lthreads) == nil;

-- Check the result and set the port version.
    if #result > 0 then
        port.version.name = result.program
        port.version.extrainfo = "RPC #" .. result.number
        if result.highver ~= result.lowver then
            port.version.version = ("%s-%s"):format(result.lowver, result.highver)
        else
            port.version.version = result.highver 
        end
        nmap.set_port_version(host, port, "hardmatched")
    else
        stdnse.print_debug("Couldn't determine the target RPC service. Running a service not in nmap-rpc ?")
    end
    return nil
end