EVOLUTION-MANAGER
Edit File: mitab_maptoolblock.cpp
/********************************************************************** * * Name: mitab_maptoollock.cpp * Project: MapInfo TAB Read/Write library * Language: C++ * Purpose: Implementation of the TABMAPToolBlock class used to handle * reading/writing of the .MAP files' drawing tool blocks * Author: Daniel Morissette, dmorissette@dmsolutions.ca * ********************************************************************** * Copyright (c) 1999, 2000, Daniel Morissette * Copyright (c) 2014, Even Rouault <even.rouault at spatialys.com> * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. **********************************************************************/ #include "cpl_port.h" #include "mitab.h" #include <cstddef> #include "cpl_conv.h" #include "cpl_error.h" #include "cpl_vsi.h" #include "mitab_priv.h" CPL_CVSID("$Id: mitab_maptoolblock.cpp 37351 2017-02-12 05:22:20Z goatbar $"); /*===================================================================== * class TABMAPToolBlock *====================================================================*/ static const int MAP_TOOL_HEADER_SIZE = 8; /********************************************************************** * TABMAPToolBlock::TABMAPToolBlock() * * Constructor. **********************************************************************/ TABMAPToolBlock::TABMAPToolBlock( TABAccess eAccessMode /*= TABRead*/ ) : TABRawBinBlock(eAccessMode, TRUE), m_numDataBytes(0), m_nNextToolBlock(0), m_numBlocksInChain(1), // Current block counts as 1 m_poBlockManagerRef(NULL) {} /********************************************************************** * TABMAPToolBlock::~TABMAPToolBlock() * * Destructor. **********************************************************************/ TABMAPToolBlock::~TABMAPToolBlock() {} /********************************************************************** * TABMAPToolBlock::EndOfChain() * * Return TRUE if we reached the end of the last block in the chain * TABMAPToolBlocks, or FALSE if there is still data to be read from * this chain. **********************************************************************/ GBool TABMAPToolBlock::EndOfChain() { if (m_pabyBuf && (m_nCurPos < (m_numDataBytes+MAP_TOOL_HEADER_SIZE) || m_nNextToolBlock > 0 ) ) { return FALSE; // There is still data to be read. } return TRUE; } /********************************************************************** * TABMAPToolBlock::InitBlockFromData() * * Perform some initialization on the block after its binary data has * been set or changed (or loaded from a file). * * Returns 0 if successful or -1 if an error happened, in which case * CPLError() will have been called. **********************************************************************/ int TABMAPToolBlock::InitBlockFromData(GByte *pabyBuf, int nBlockSize, int nSizeUsed, GBool bMakeCopy /* = TRUE */, VSILFILE *fpSrc /* = NULL */, int nOffset /* = 0 */) { /*----------------------------------------------------------------- * First of all, we must call the base class' InitBlockFromData() *----------------------------------------------------------------*/ const int nStatus = TABRawBinBlock::InitBlockFromData(pabyBuf, nBlockSize, nSizeUsed, bMakeCopy, fpSrc, nOffset); if (nStatus != 0) return nStatus; /*----------------------------------------------------------------- * Validate block type *----------------------------------------------------------------*/ if (m_nBlockType != TABMAP_TOOL_BLOCK) { CPLError(CE_Failure, CPLE_FileIO, "InitBlockFromData(): Invalid Block Type: got %d expected %d", m_nBlockType, TABMAP_TOOL_BLOCK); CPLFree(m_pabyBuf); m_pabyBuf = NULL; return -1; } /*----------------------------------------------------------------- * Init member variables *----------------------------------------------------------------*/ GotoByteInBlock(0x002); m_numDataBytes = ReadInt16(); /* Excluding 8 bytes header */ if( m_numDataBytes < 0 || m_numDataBytes + MAP_TOOL_HEADER_SIZE > nBlockSize ) { CPLError(CE_Failure, CPLE_FileIO, "TABMAPToolBlock::InitBlockFromData(): m_numDataBytes=%d incompatible with block size %d", m_numDataBytes, nBlockSize); CPLFree(m_pabyBuf); m_pabyBuf = NULL; return -1; } m_nNextToolBlock = ReadInt32(); if( m_nNextToolBlock != 0 && (m_nNextToolBlock / m_nBlockSize) * m_nBlockSize == nOffset ) { CPLError(CE_Failure, CPLE_FileIO, "InitBlockFromData(): self referencing block"); CPLFree(m_pabyBuf); m_pabyBuf = NULL; return -1; } /*----------------------------------------------------------------- * The read ptr is now located at the beginning of the data part. *----------------------------------------------------------------*/ GotoByteInBlock(MAP_TOOL_HEADER_SIZE); return 0; } /********************************************************************** * TABMAPToolBlock::CommitToFile() * * Commit the current state of the binary block to the file to which * it has been previously attached. * * This method makes sure all values are properly set in the map object * block header and then calls TABRawBinBlock::CommitToFile() to do * the actual writing to disk. * * Returns 0 if successful or -1 if an error happened, in which case * CPLError() will have been called. **********************************************************************/ int TABMAPToolBlock::CommitToFile() { int nStatus = 0; if ( m_pabyBuf == NULL ) { CPLError(CE_Failure, CPLE_AssertionFailed, "CommitToFile(): Block has not been initialized yet!"); return -1; } /*----------------------------------------------------------------- * Nothing to do here if block has not been modified *----------------------------------------------------------------*/ if (!m_bModified) return 0; /*----------------------------------------------------------------- * Make sure 8 bytes block header is up to date. *----------------------------------------------------------------*/ GotoByteInBlock(0x000); WriteInt16(TABMAP_TOOL_BLOCK); // Block type code CPLAssert(m_nSizeUsed >= MAP_TOOL_HEADER_SIZE && m_nSizeUsed < MAP_TOOL_HEADER_SIZE + 32768); WriteInt16((GInt16)(m_nSizeUsed - MAP_TOOL_HEADER_SIZE)); // num. bytes used WriteInt32(m_nNextToolBlock); nStatus = CPLGetLastErrorNo(); /*----------------------------------------------------------------- * OK, call the base class to write the block to disk. *----------------------------------------------------------------*/ if (nStatus == 0) { #ifdef DEBUG_VERBOSE CPLDebug("MITAB", "Committing TOOL block to offset %d", m_nFileOffset); #endif nStatus = TABRawBinBlock::CommitToFile(); } return nStatus; } /********************************************************************** * TABMAPToolBlock::InitNewBlock() * * Initialize a newly created block so that it knows to which file it * is attached, its block size, etc . and then perform any specific * initialization for this block type, including writing a default * block header, etc. and leave the block ready to receive data. * * This is an alternative to calling ReadFromFile() or InitBlockFromData() * that puts the block in a stable state without loading any initial * data in it. * * Returns 0 if successful or -1 if an error happened, in which case * CPLError() will have been called. **********************************************************************/ int TABMAPToolBlock::InitNewBlock(VSILFILE *fpSrc, int nBlockSize, int nFileOffset /* = 0*/) { #ifdef DEBUG_VERBOSE CPLDebug( "MITAB", "Instantiating new TOOL block at offset %d", nFileOffset); #endif /*----------------------------------------------------------------- * Start with the default initialization *----------------------------------------------------------------*/ if ( TABRawBinBlock::InitNewBlock(fpSrc, nBlockSize, nFileOffset) != 0) return -1; /*----------------------------------------------------------------- * And then set default values for the block header. *----------------------------------------------------------------*/ m_nNextToolBlock = 0; m_numDataBytes = 0; GotoByteInBlock(0x000); if (m_eAccess != TABRead) { WriteInt16(TABMAP_TOOL_BLOCK); // Block type code WriteInt16(0); // num. bytes used, excluding header WriteInt32(0); // Pointer to next tool block } if (CPLGetLastErrorNo() != 0) return -1; return 0; } /********************************************************************** * TABMAPToolBlock::SetNextToolBlock() * * Set the address (offset from beginning of file) of the drawing tool block * that follows the current one. **********************************************************************/ void TABMAPToolBlock::SetNextToolBlock(GInt32 nNextToolBlockAddress) { m_nNextToolBlock = nNextToolBlockAddress; } /********************************************************************** * TABMAPToolBlock::SetMAPBlockManagerRef() * * Pass a reference to the block manager object for the file this * block belongs to. The block manager will be used by this object * when it needs to automatically allocate a new block. **********************************************************************/ void TABMAPToolBlock::SetMAPBlockManagerRef(TABBinBlockManager *poBlockMgr) { m_poBlockManagerRef = poBlockMgr; }; /********************************************************************** * TABMAPToolBlock::ReadBytes() * * Cover function for TABRawBinBlock::ReadBytes() that will automagically * load the next coordinate block in the chain before reading the * requested bytes if we are at the end of the current block and if * m_nNextToolBlock is a valid block. * * Then the control is passed to TABRawBinBlock::ReadBytes() to finish the * work: * Copy the number of bytes from the data block's internal buffer to * the user's buffer pointed by pabyDstBuf. * * Passing pabyDstBuf = NULL will only move the read pointer by the * specified number of bytes as if the copy had happened... but it * won't crash. * * Returns 0 if successful or -1 if an error happened, in which case * CPLError() will have been called. **********************************************************************/ int TABMAPToolBlock::ReadBytes(int numBytes, GByte *pabyDstBuf) { if (m_pabyBuf && m_nCurPos >= (m_numDataBytes+MAP_TOOL_HEADER_SIZE) && m_nNextToolBlock > 0) { int nStatus = GotoByteInFile(m_nNextToolBlock); if( nStatus != 0 ) { // Failed.... an error has already been reported. return nStatus; } GotoByteInBlock(MAP_TOOL_HEADER_SIZE); // Move pointer past header m_numBlocksInChain++; } return TABRawBinBlock::ReadBytes(numBytes, pabyDstBuf); } /********************************************************************** * TABMAPToolBlock::WriteBytes() * * Cover function for TABRawBinBlock::WriteBytes() that will automagically * CommitToFile() the current block and create a new one if we are at * the end of the current block. * * Then the control is passed to TABRawBinBlock::WriteBytes() to finish the * work. * * Passing pabySrcBuf = NULL will only move the write pointer by the * specified number of bytes as if the copy had happened... but it * won't crash. * * Returns 0 if successful or -1 if an error happened, in which case * CPLError() will have been called. **********************************************************************/ int TABMAPToolBlock::WriteBytes(int nBytesToWrite, const GByte *pabySrcBuf) { if (m_eAccess == TABWrite && m_poBlockManagerRef && (m_nBlockSize - m_nCurPos) < nBytesToWrite) { int nNewBlockOffset = m_poBlockManagerRef->AllocNewBlock("TOOL"); SetNextToolBlock(nNewBlockOffset); if (CommitToFile() != 0 || InitNewBlock(m_fp, m_nBlockSize, nNewBlockOffset) != 0) { // An error message should have already been reported. return -1; } m_numBlocksInChain ++; } return TABRawBinBlock::WriteBytes(nBytesToWrite, pabySrcBuf); } /********************************************************************** * TABMAPToolBlock::CheckAvailableSpace() * * Check if an object of the specified type can fit in * current block. If it can't fit then force committing current block * and allocating a new one. * * Returns 0 if successful or -1 if an error happened, in which case * CPLError() will have been called. **********************************************************************/ int TABMAPToolBlock::CheckAvailableSpace(int nToolType) { int nBytesToWrite = 0; switch(nToolType) { case TABMAP_TOOL_PEN: nBytesToWrite = 11; break; case TABMAP_TOOL_BRUSH: nBytesToWrite = 13; break; case TABMAP_TOOL_FONT: nBytesToWrite = 37; break; case TABMAP_TOOL_SYMBOL: nBytesToWrite = 13; break; default: CPLAssert(false); } if (GetNumUnusedBytes() < nBytesToWrite) { int nNewBlockOffset = m_poBlockManagerRef->AllocNewBlock("TOOL"); SetNextToolBlock(nNewBlockOffset); if (CommitToFile() != 0 || InitNewBlock(m_fp, m_nBlockSize, nNewBlockOffset) != 0) { // An error message should have already been reported. return -1; } m_numBlocksInChain ++; } return 0; } /********************************************************************** * TABMAPToolBlock::Dump() * * Dump block contents... available only in DEBUG mode. **********************************************************************/ #ifdef DEBUG void TABMAPToolBlock::Dump(FILE *fpOut /*=NULL*/) { if (fpOut == NULL) fpOut = stdout; fprintf(fpOut, "----- TABMAPToolBlock::Dump() -----\n"); if (m_pabyBuf == NULL) { fprintf(fpOut, "Block has not been initialized yet."); } else { fprintf(fpOut,"Tool Block (type %d) at offset %d.\n", m_nBlockType, m_nFileOffset); fprintf(fpOut," m_numDataBytes = %d\n", m_numDataBytes); fprintf(fpOut," m_nNextToolBlock = %d\n", m_nNextToolBlock); } fflush(fpOut); } #endif // DEBUG