EVOLUTION-MANAGER

Edit File: test_widgets.py

import matplotlib.widgets as widgets
import matplotlib.pyplot as plt
from matplotlib.testing.decorators import image_comparison
from matplotlib.testing.widgets import do_event, get_ax

from numpy.testing import assert_allclose

import pytest

def check_rectangle(**kwargs):
    ax = get_ax()

def onselect(epress, erelease):
        ax._got_onselect = True
        assert epress.xdata == 100
        assert epress.ydata == 100
        assert erelease.xdata == 199
        assert erelease.ydata == 199

tool = widgets.RectangleSelector(ax, onselect, **kwargs)
    do_event(tool, 'press', xdata=100, ydata=100, button=1)
    do_event(tool, 'onmove', xdata=199, ydata=199, button=1)

# purposely drag outside of axis for release
    do_event(tool, 'release', xdata=250, ydata=250, button=1)

if kwargs.get('drawtype', None) not in ['line', 'none']:
        assert_allclose(tool.geometry,
                        [[100., 100, 199, 199, 100],
                         [100, 199, 199, 100, 100]],
                        err_msg=tool.geometry)

assert ax._got_onselect

def test_rectangle_selector():
    check_rectangle()
    check_rectangle(drawtype='line', useblit=False)
    check_rectangle(useblit=True, button=1)
    check_rectangle(drawtype='none', minspanx=10, minspany=10)
    check_rectangle(minspanx=10, minspany=10, spancoords='pixels')
    check_rectangle(rectprops=dict(fill=True))

def test_ellipse():
    """For ellipse, test out the key modifiers"""
    ax = get_ax()

def onselect(epress, erelease):
        pass

tool = widgets.EllipseSelector(ax, onselect=onselect,
                                   maxdist=10, interactive=True)
    tool.extents = (100, 150, 100, 150)

# drag the rectangle
    do_event(tool, 'press', xdata=10, ydata=10, button=1,
             key=' ')

do_event(tool, 'onmove', xdata=30, ydata=30, button=1)
    do_event(tool, 'release', xdata=30, ydata=30, button=1)
    assert tool.extents == (120, 170, 120, 170)

# create from center
    do_event(tool, 'on_key_press', xdata=100, ydata=100, button=1,
             key='control')
    do_event(tool, 'press', xdata=100, ydata=100, button=1)
    do_event(tool, 'onmove', xdata=125, ydata=125, button=1)
    do_event(tool, 'release', xdata=125, ydata=125, button=1)
    do_event(tool, 'on_key_release', xdata=100, ydata=100, button=1,
             key='control')
    assert tool.extents == (75, 125, 75, 125)

# create a square
    do_event(tool, 'on_key_press', xdata=10, ydata=10, button=1,
             key='shift')
    do_event(tool, 'press', xdata=10, ydata=10, button=1)
    do_event(tool, 'onmove', xdata=35, ydata=30, button=1)
    do_event(tool, 'release', xdata=35, ydata=30, button=1)
    do_event(tool, 'on_key_release', xdata=10, ydata=10, button=1,
             key='shift')
    extents = [int(e) for e in tool.extents]
    assert extents == [10, 35, 10, 34]

# create a square from center
    do_event(tool, 'on_key_press', xdata=100, ydata=100, button=1,
             key='ctrl+shift')
    do_event(tool, 'press', xdata=100, ydata=100, button=1)
    do_event(tool, 'onmove', xdata=125, ydata=130, button=1)
    do_event(tool, 'release', xdata=125, ydata=130, button=1)
    do_event(tool, 'on_key_release', xdata=100, ydata=100, button=1,
             key='ctrl+shift')
    extents = [int(e) for e in tool.extents]
    assert extents == [70, 129, 70, 130]

assert tool.geometry.shape == (2, 73)
    assert_allclose(tool.geometry[:, 0], [70., 100])

def test_rectangle_handles():
    ax = get_ax()

def onselect(epress, erelease):
        pass

tool = widgets.RectangleSelector(ax, onselect=onselect,
                                     maxdist=10, interactive=True)
    tool.extents = (100, 150, 100, 150)

assert tool.corners == (
        (100, 150, 150, 100), (100, 100, 150, 150))
    assert tool.extents == (100, 150, 100, 150)
    assert tool.edge_centers == (
        (100, 125.0, 150, 125.0), (125.0, 100, 125.0, 150))
    assert tool.extents == (100, 150, 100, 150)

# grab a corner and move it
    do_event(tool, 'press', xdata=100, ydata=100)
    do_event(tool, 'onmove', xdata=120, ydata=120)
    do_event(tool, 'release', xdata=120, ydata=120)
    assert tool.extents == (120, 150, 120, 150)

# grab the center and move it
    do_event(tool, 'press', xdata=132, ydata=132)
    do_event(tool, 'onmove', xdata=120, ydata=120)
    do_event(tool, 'release', xdata=120, ydata=120)
    assert tool.extents == (108, 138, 108, 138)

# create a new rectangle
    do_event(tool, 'press', xdata=10, ydata=10)
    do_event(tool, 'onmove', xdata=100, ydata=100)
    do_event(tool, 'release', xdata=100, ydata=100)
    assert tool.extents == (10, 100, 10, 100)

def check_span(*args, **kwargs):
    ax = get_ax()

def onselect(vmin, vmax):
        ax._got_onselect = True
        assert vmin == 100
        assert vmax == 150

def onmove(vmin, vmax):
        assert vmin == 100
        assert vmax == 125
        ax._got_on_move = True

if 'onmove_callback' in kwargs:
        kwargs['onmove_callback'] = onmove

tool = widgets.SpanSelector(ax, onselect, *args, **kwargs)
    do_event(tool, 'press', xdata=100, ydata=100, button=1)
    do_event(tool, 'onmove', xdata=125, ydata=125, button=1)
    do_event(tool, 'release', xdata=150, ydata=150, button=1)

assert ax._got_onselect

if 'onmove_callback' in kwargs:
        assert ax._got_on_move

def test_span_selector():
    check_span('horizontal', minspan=10, useblit=True)
    check_span('vertical', onmove_callback=True, button=1)
    check_span('horizontal', rectprops=dict(fill=True))

def check_lasso_selector(**kwargs):
    ax = get_ax()

def onselect(verts):
        ax._got_onselect = True
        assert verts == [(100, 100), (125, 125), (150, 150)]

tool = widgets.LassoSelector(ax, onselect, **kwargs)
    do_event(tool, 'press', xdata=100, ydata=100, button=1)
    do_event(tool, 'onmove', xdata=125, ydata=125, button=1)
    do_event(tool, 'release', xdata=150, ydata=150, button=1)

assert ax._got_onselect

def test_lasso_selector():
    check_lasso_selector()
    check_lasso_selector(useblit=False, lineprops=dict(color='red'))
    check_lasso_selector(useblit=True, button=1)

def test_CheckButtons():
    ax = get_ax()
    check = widgets.CheckButtons(ax, ('a', 'b', 'c'), (True, False, True))
    assert check.get_status() == [True, False, True]
    check.set_active(0)
    assert check.get_status() == [False, False, True]

cid = check.on_clicked(lambda: None)
    check.disconnect(cid)

@image_comparison(['check_radio_buttons.png'], style='mpl20', remove_text=True)
def test_check_radio_buttons_image():
    # Remove this line when this test image is regenerated.
    plt.rcParams['text.kerning_factor'] = 6

get_ax()
    plt.subplots_adjust(left=0.3)
    rax1 = plt.axes([0.05, 0.7, 0.15, 0.15])
    rax2 = plt.axes([0.05, 0.2, 0.15, 0.15])
    widgets.RadioButtons(rax1, ('Radio 1', 'Radio 2', 'Radio 3'))
    widgets.CheckButtons(rax2, ('Check 1', 'Check 2', 'Check 3'),
                         (False, True, True))

@image_comparison(['check_bunch_of_radio_buttons.png'],
                  style='mpl20', remove_text=True)
def test_check_bunch_of_radio_buttons():
    rax = plt.axes([0.05, 0.1, 0.15, 0.7])
    widgets.RadioButtons(rax, ('B1', 'B2', 'B3', 'B4', 'B5', 'B6',
                               'B7', 'B8', 'B9', 'B10', 'B11', 'B12',
                               'B13', 'B14', 'B15'))

def test_slider_slidermin_slidermax_invalid():
    fig, ax = plt.subplots()
    # test min/max with floats
    with pytest.raises(ValueError):
        widgets.Slider(ax=ax, label='', valmin=0.0, valmax=24.0,
                       slidermin=10.0)
    with pytest.raises(ValueError):
        widgets.Slider(ax=ax, label='', valmin=0.0, valmax=24.0,
                       slidermax=10.0)

def test_slider_slidermin_slidermax():
    fig, ax = plt.subplots()
    slider_ = widgets.Slider(ax=ax, label='', valmin=0.0, valmax=24.0,
                             valinit=5.0)

slider = widgets.Slider(ax=ax, label='', valmin=0.0, valmax=24.0,
                            valinit=1.0, slidermin=slider_)
    assert slider.val == slider_.val

slider = widgets.Slider(ax=ax, label='', valmin=0.0, valmax=24.0,
                            valinit=10.0, slidermax=slider_)
    assert slider.val == slider_.val

def test_slider_valmin_valmax():
    fig, ax = plt.subplots()
    slider = widgets.Slider(ax=ax, label='', valmin=0.0, valmax=24.0,
                            valinit=-10.0)
    assert slider.val == slider.valmin

slider = widgets.Slider(ax=ax, label='', valmin=0.0, valmax=24.0,
                            valinit=25.0)
    assert slider.val == slider.valmax

def test_slider_horizontal_vertical():
    fig, ax = plt.subplots()
    slider = widgets.Slider(ax=ax, label='', valmin=0, valmax=24,
                            valinit=12, orientation='horizontal')
    slider.set_val(10)
    assert slider.val == 10
    # check the dimension of the slider patch in axes units
    box = slider.poly.get_extents().transformed(ax.transAxes.inverted())
    assert_allclose(box.bounds, [0, 0, 10/24, 1])

fig, ax = plt.subplots()
    slider = widgets.Slider(ax=ax, label='', valmin=0, valmax=24,
                            valinit=12, orientation='vertical')
    slider.set_val(10)
    assert slider.val == 10
    # check the dimension of the slider patch in axes units
    box = slider.poly.get_extents().transformed(ax.transAxes.inverted())
    assert_allclose(box.bounds, [0, 0, 1, 10/24])

def check_polygon_selector(event_sequence, expected_result, selections_count):
    """
    Helper function to test Polygon Selector.

Parameters
    ----------
    event_sequence : list of tuples (etype, dict())
        A sequence of events to perform. The sequence is a list of tuples
        where the first element of the tuple is an etype (e.g., 'onmove',
        'press', etc.), and the second element of the tuple is a dictionary of
         the arguments for the event (e.g., xdata=5, key='shift', etc.).
    expected_result : list of vertices (xdata, ydata)
        The list of vertices that are expected to result from the event
        sequence.
    selections_count : int
        Wait for the tool to call its `onselect` function `selections_count`
        times, before comparing the result to the `expected_result`
    """
    ax = get_ax()

ax._selections_count = 0

def onselect(vertices):
        ax._selections_count += 1
        ax._current_result = vertices

tool = widgets.PolygonSelector(ax, onselect)

for (etype, event_args) in event_sequence:
        do_event(tool, etype, **event_args)

assert ax._selections_count == selections_count
    assert ax._current_result == expected_result

def polygon_place_vertex(xdata, ydata):
    return [('onmove', dict(xdata=xdata, ydata=ydata)),
            ('press', dict(xdata=xdata, ydata=ydata)),
            ('release', dict(xdata=xdata, ydata=ydata))]

def test_polygon_selector():
    # Simple polygon
    expected_result = [(50, 50), (150, 50), (50, 150)]
    event_sequence = (polygon_place_vertex(50, 50)
                      + polygon_place_vertex(150, 50)
                      + polygon_place_vertex(50, 150)
                      + polygon_place_vertex(50, 50))
    check_polygon_selector(event_sequence, expected_result, 1)

# Move first vertex before completing the polygon.
    expected_result = [(75, 50), (150, 50), (50, 150)]
    event_sequence = (polygon_place_vertex(50, 50)
                      + polygon_place_vertex(150, 50)
                      + [('on_key_press', dict(key='control')),
                         ('onmove', dict(xdata=50, ydata=50)),
                         ('press', dict(xdata=50, ydata=50)),
                         ('onmove', dict(xdata=75, ydata=50)),
                         ('release', dict(xdata=75, ydata=50)),
                         ('on_key_release', dict(key='control'))]
                      + polygon_place_vertex(50, 150)
                      + polygon_place_vertex(75, 50))
    check_polygon_selector(event_sequence, expected_result, 1)

# Move first two vertices at once before completing the polygon.
    expected_result = [(50, 75), (150, 75), (50, 150)]
    event_sequence = (polygon_place_vertex(50, 50)
                      + polygon_place_vertex(150, 50)
                      + [('on_key_press', dict(key='shift')),
                         ('onmove', dict(xdata=100, ydata=100)),
                         ('press', dict(xdata=100, ydata=100)),
                         ('onmove', dict(xdata=100, ydata=125)),
                         ('release', dict(xdata=100, ydata=125)),
                         ('on_key_release', dict(key='shift'))]
                      + polygon_place_vertex(50, 150)
                      + polygon_place_vertex(50, 75))
    check_polygon_selector(event_sequence, expected_result, 1)

# Move first vertex after completing the polygon.
    expected_result = [(75, 50), (150, 50), (50, 150)]
    event_sequence = (polygon_place_vertex(50, 50)
                      + polygon_place_vertex(150, 50)
                      + polygon_place_vertex(50, 150)
                      + polygon_place_vertex(50, 50)
                      + [('onmove', dict(xdata=50, ydata=50)),
                         ('press', dict(xdata=50, ydata=50)),
                         ('onmove', dict(xdata=75, ydata=50)),
                         ('release', dict(xdata=75, ydata=50))])
    check_polygon_selector(event_sequence, expected_result, 2)

# Move all vertices after completing the polygon.
    expected_result = [(75, 75), (175, 75), (75, 175)]
    event_sequence = (polygon_place_vertex(50, 50)
                      + polygon_place_vertex(150, 50)
                      + polygon_place_vertex(50, 150)
                      + polygon_place_vertex(50, 50)
                      + [('on_key_press', dict(key='shift')),
                         ('onmove', dict(xdata=100, ydata=100)),
                         ('press', dict(xdata=100, ydata=100)),
                         ('onmove', dict(xdata=125, ydata=125)),
                         ('release', dict(xdata=125, ydata=125)),
                         ('on_key_release', dict(key='shift'))])
    check_polygon_selector(event_sequence, expected_result, 2)

# Try to move a vertex and move all before placing any vertices.
    expected_result = [(50, 50), (150, 50), (50, 150)]
    event_sequence = ([('on_key_press', dict(key='control')),
                       ('onmove', dict(xdata=100, ydata=100)),
                       ('press', dict(xdata=100, ydata=100)),
                       ('onmove', dict(xdata=125, ydata=125)),
                       ('release', dict(xdata=125, ydata=125)),
                       ('on_key_release', dict(key='control')),
                       ('on_key_press', dict(key='shift')),
                       ('onmove', dict(xdata=100, ydata=100)),
                       ('press', dict(xdata=100, ydata=100)),
                       ('onmove', dict(xdata=125, ydata=125)),
                       ('release', dict(xdata=125, ydata=125)),
                       ('on_key_release', dict(key='shift'))]
                      + polygon_place_vertex(50, 50)
                      + polygon_place_vertex(150, 50)
                      + polygon_place_vertex(50, 150)
                      + polygon_place_vertex(50, 50))
    check_polygon_selector(event_sequence, expected_result, 1)

# Try to place vertex out-of-bounds, then reset, and start a new polygon.
    expected_result = [(50, 50), (150, 50), (50, 150)]
    event_sequence = (polygon_place_vertex(50, 50)
                      + polygon_place_vertex(250, 50)
                      + [('on_key_press', dict(key='escape')),
                         ('on_key_release', dict(key='escape'))]
                      + polygon_place_vertex(50, 50)
                      + polygon_place_vertex(150, 50)
                      + polygon_place_vertex(50, 150)
                      + polygon_place_vertex(50, 50))
    check_polygon_selector(event_sequence, expected_result, 1)