EVOLUTION-MANAGER

Edit File: ios_l2_interfaces.py

#!/usr/bin/python
# -*- coding: utf-8 -*-
# Copyright 2019 Red Hat
# GNU General Public License v3.0+
# (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)

#############################################
#                WARNING                    #
#############################################
#
# This file is auto generated by the resource
#   module builder playbook.
#
# Do not edit this file manually.
#
# Changes to this file will be over written
#   by the resource module builder.
#
# Changes should be made in the model used to
#   generate this file or in the resource module
#   builder template.
#
#############################################

"""
The module file for ios_l2_interfaces
"""

from __future__ import absolute_import, division, print_function
__metaclass__ = type

ANSIBLE_METADATA = {'metadata_version': '1.1',
                    'status': ['preview'],
                    'supported_by': 'network'}

DOCUMENTATION = """
---
module: ios_l2_interfaces
version_added: 2.9
short_description: Manage Layer-2 interface on Cisco IOS devices.
description: This module provides declarative management of Layer-2 interface on Cisco IOS devices.
author: Sumit Jaiswal (@justjais)
notes:
  - Tested against Cisco IOSv Version 15.2 on VIRL
  - This module works with connection C(network_cli).
    See L(IOS Platform Options,../network/user_guide/platform_ios.html).
options:
  config:
    description: A dictionary of Layer-2 interface options
    type: list
    elements: dict
    suboptions:
      name:
        description:
        - Full name of the interface excluding any logical unit number, i.e. GigabitEthernet0/1.
        type: str
        required: True
      access:
        description:
        - Switchport mode access command to configure the interface as a layer 2 access.
        type: dict
        suboptions:
          vlan:
            description:
            - Configure given VLAN in access port. It's used as the access VLAN ID.
            type: int
      trunk:
        description:
        - Switchport mode trunk command to configure the interface as a Layer 2 trunk.
          Note The encapsulation is always set to dot1q.
        type: dict
        suboptions:
          allowed_vlans:
            description:
            - List of allowed VLANs in a given trunk port. These are the only VLANs that will be
              configured on the trunk.
            type: list
          native_vlan:
            description:
            - Native VLAN to be configured in trunk port. It's used as the trunk native VLAN ID.
            type: int
          encapsulation:
            description:
            - Trunking encapsulation when interface is in trunking mode.
            choices: ['dot1q','isl','negotiate']
            type: str
          pruning_vlans:
            description:
            - Pruning VLAN to be configured in trunk port. It's used as the trunk pruning VLAN ID.
            type: list
  state:
    choices:
    - merged
    - replaced
    - overridden
    - deleted
    default: merged
    description:
    - The state of the configuration after module completion
    type: str
"""

EXAMPLES = """
---

# Using merged

# Before state:
# -------------
#
# viosl2#show running-config | section ^interface
# interface GigabitEthernet0/1
#  description Configured by Ansible
#  negotiation auto
# interface GigabitEthernet0/2
#  description This is test
#  switchport access vlan 20
#  media-type rj45
#  negotiation auto

- name: Merge provided configuration with device configuration
  ios_l2_interfaces:
    config:
      - name: GigabitEthernet0/1
        access:
          vlan: 10
      - name: GigabitEthernet0/2
        trunk:
          allowed_vlan: 10-20, 40
          native_vlan: 20
          pruning_vlan: 10,20
          encapsulation: dot1q
    state: merged

# After state:
# ------------
#
# viosl2#show running-config | section ^interface
# interface GigabitEthernet0/1
#  description Configured by Ansible
#  switchport access vlan 10
#  negotiation auto
# interface GigabitEthernet0/2
#  description This is test
#  switchport trunk allowed vlan 10-20,40
#  switchport trunk encapsulation dot1q
#  switchport trunk native vlan 20
#  switchport trunk pruning vlan 10,20
#  media-type rj45
#  negotiation auto

# Using replaced

- name: Replaces device configuration of listed l2 interfaces with provided configuration
  ios_l2_interfaces:
    config:
      - name: GigabitEthernet0/2
        trunk:
        - allowed_vlan: 20-25,40
          native_vlan: 20
          pruning_vlan: 10
          encapsulation: isl
    state: replaced

# After state:
# -------------
#
# viosl2#show running-config | section ^interface
# interface GigabitEthernet0/1
#  description Configured by Ansible
#  switchport access vlan 20
#  negotiation auto
# interface GigabitEthernet0/2
#  description This is test
#  switchport trunk allowed vlan 20-25,40
#  switchport trunk encapsulation isl
#  switchport trunk native vlan 20
#  switchport trunk pruning vlan 10
#  media-type rj45
#  negotiation auto

# Using overridden

# Before state:
# -------------
#
# viosl2#show running-config | section ^interface
# interface GigabitEthernet0/1
#  description Configured by Ansible
#  switchport trunk encapsulation dot1q
#  switchport trunk native vlan 20
#  negotiation auto
# interface GigabitEthernet0/2
#  description This is test
#  switchport access vlan 20
#  switchport trunk encapsulation dot1q
#  switchport trunk native vlan 20
#  media-type rj45
#  negotiation auto

- name: Override device configuration of all l2 interfaces with provided configuration
  ios_l2_interfaces:
    config:
      - name: GigabitEthernet0/2
        access:
          vlan: 20
    state: overridden

# Using Deleted

# Before state:
# -------------
#
# viosl2#show running-config | section ^interface
# interface GigabitEthernet0/1
#  description Configured by Ansible
#  switchport access vlan 20
#  negotiation auto
# interface GigabitEthernet0/2
#  description This is test
#  switchport access vlan 20
#  switchport trunk allowed vlan 20-40,60,80
#  switchport trunk encapsulation dot1q
#  switchport trunk native vlan 10
#  switchport trunk pruning vlan 10
#  media-type rj45
#  negotiation auto

- name: Delete IOS L2 interfaces as in given arguments
  ios_l2_interfaces:
    config:
      - name: GigabitEthernet0/1
    state: deleted

# After state:
# -------------
#
# viosl2#show running-config | section ^interface
# interface GigabitEthernet0/1
#  description Configured by Ansible
#  negotiation auto
# interface GigabitEthernet0/2
#  description This is test
#  switchport access vlan 20
#  switchport trunk allowed vlan 20-40,60,80
#  switchport trunk encapsulation dot1q
#  switchport trunk native vlan 10
#  switchport trunk pruning vlan 10
#  media-type rj45
#  negotiation auto

# Using Deleted without any config passed
#"(NOTE: This will delete all of configured resource module attributes from each configured interface)"

- name: Delete IOS L2 interfaces as in given arguments
  ios_l2_interfaces:
    state: deleted

"""

RETURN = """
before:
  description: The configuration as structured data prior to module invocation.
  returned: always
  type: list
  sample: The configuration returned will always be in the same format of the parameters above.
after:
  description: The configuration as structured data after module completion.
  returned: when changed
  type: list
  sample: The configuration returned will always be in the same format of the parameters above.
commands:
  description: The set of commands pushed to the remote device
  returned: always
  type: list
  sample: ['interface GigabitEthernet0/1', 'switchport access vlan 20']
"""

from ansible.module_utils.basic import AnsibleModule
from ansible.module_utils.network.ios.argspec.l2_interfaces.l2_interfaces import L2_InterfacesArgs
from ansible.module_utils.network.ios.config.l2_interfaces.l2_interfaces import L2_Interfaces

def main():
    """
    Main entry point for module execution

:returns: the result form module invocation
    """
    required_if = [('state', 'merged', ('config',)),
                   ('state', 'replaced', ('config',)),
                   ('state', 'overridden', ('config',))]

module = AnsibleModule(argument_spec=L2_InterfacesArgs.argument_spec,
                           required_if=required_if,
                           supports_check_mode=True)

result = L2_Interfaces(module).execute_module()
    module.exit_json(**result)

if __name__ == '__main__':
    main()