EVOLUTION-MANAGER

Edit File: Microsoft.Common.CurrentVersion.targets

<!--
***********************************************************************************************
Microsoft.Common.CurrentVersion.targets

WARNING:  DO NOT MODIFY this file unless you are knowledgeable about MSBuild and have
          created a backup copy.  Incorrect changes to this file will make it
          impossible to load or build your projects from the command-line or the IDE.

This file defines the steps in the standard build process for .NET projects.  It
contains all the steps that are common among the different .NET languages, such as
Visual Basic, and Visual C#.

Copyright (C) Microsoft Corporation. All rights reserved.
***********************************************************************************************
-->

<PropertyGroup>
    <VisualStudioVersion Condition="'$(VisualStudioVersion)' == ''">10.0</VisualStudioVersion>
  </PropertyGroup>

<PropertyGroup>
    <CustomBeforeMicrosoftCommonTargets Condition="'$(CustomBeforeMicrosoftCommonTargets)'==''">$(MSBuildExtensionsPath)\v$(MSBuildToolsVersion)\Custom.Before.Microsoft.Common.targets</CustomBeforeMicrosoftCommonTargets>
    <CustomAfterMicrosoftCommonTargets Condition="'$(CustomAfterMicrosoftCommonTargets)'==''">$(MSBuildExtensionsPath)\v$(MSBuildToolsVersion)\Custom.After.Microsoft.Common.targets</CustomAfterMicrosoftCommonTargets>
    <ReportingServicesTargets Condition="'$(ReportingServicesTargets)'==''">$(MSBuildExtensionsPath)\Microsoft\VisualStudio\v$(VisualStudioVersion)\ReportingServices\Microsoft.ReportingServices.targets</ReportingServicesTargets>
  </PropertyGroup>

<PropertyGroup Condition="'$(TargetRuntime)' == ''">
    <TargetRuntime>Managed</TargetRuntime>
  </PropertyGroup>

<PropertyGroup Condition="'$(TargetRuntime)' == 'Managed'">
    <TargetFrameworkIdentifier Condition="'$(TargetFrameworkIdentifier)' == ''">.NETFramework</TargetFrameworkIdentifier>
    <TargetFrameworkVersion Condition=" '$(TargetFrameworkVersion)' == '' ">v4.0</TargetFrameworkVersion>
  </PropertyGroup>

<PropertyGroup>
    <AvailablePlatforms Condition="'$(VisualStudioVersion)' == '10.0' or '$(VisualStudioVersion)' == ''">Any CPU,x86,x64,Itanium</AvailablePlatforms>
    <AvailablePlatforms Condition="'$(VisualStudioVersion)' != '' and '$(VisualStudioVersion)' > '10.0'">Any CPU,x86,x64</AvailablePlatforms>
  </PropertyGroup>

<Import Project="Microsoft.NETFramework.props" Condition="'$(TargetFrameworkIdentifier)' == '.NETFramework' or '$(TargetFrameworkIdentifier)' == 'Silverlight'"/>
  <Import Project="Microsoft.NET.props" Condition="'$(TargetFrameworkIdentifier)' == '.NETStandard' or '$(TargetFrameworkIdentifier)' == '.NETCoreApp'"/>

<PropertyGroup Condition="'$(TargetFrameworkIdentifier)' != '' and '$(TargetFrameworkVersion)' != ''">
    <TargetFrameworkMoniker Condition="'$(TargetFrameworkMoniker)' == '' and '$([System.String]::IsNullOrWhitespace($(TargetFrameworkProfile)))' != 'true'">$(TargetFrameworkIdentifier),Version=$(TargetFrameworkVersion),Profile=$(TargetFrameworkProfile)</TargetFrameworkMoniker>
    <TargetFrameworkMoniker Condition="'$(TargetFrameworkMoniker)' == ''">$(TargetFrameworkIdentifier),Version=$(TargetFrameworkVersion)</TargetFrameworkMoniker>

<FrameworkPathOverride Condition="'$(EnableFrameworkPathOverride)' != 'false' And '$(FrameworkPathOverride)' == '' And Exists('$(TargetFrameworkRootPath)$(TargetFrameworkIdentifier)\$(TargetFrameworkVersion)')">$(TargetFrameworkRootPath)$(TargetFrameworkIdentifier)\$(TargetFrameworkVersion)</FrameworkPathOverride>
    
    <FrameworkPathOverride Condition="'$(EnableFrameworkPathOverride)' != 'false' And '$(FrameworkPathOverride)' == ''">$([Microsoft.Build.Utilities.ToolLocationHelper]::GetPathToStandardLibraries($(TargetFrameworkIdentifier), $(TargetFrameworkVersion), $(TargetFrameworkProfile), $(PlatformTarget), $(TargetFrameworkRootPath), $(TargetFrameworkFallbackSearchPaths)))</FrameworkPathOverride>
    <FrameworkPathOverride Condition="'$(EnableFrameworkPathOverride)' != 'false' And !Exists('$(FrameworkPathOverride)\mscorlib.dll')">$(MSBuildFrameworkToolsPath)</FrameworkPathOverride>
  </PropertyGroup>

<PropertyGroup>
    <TargetPlatformIdentifier Condition="'$(TargetPlatformIdentifier)' == ''">Windows</TargetPlatformIdentifier>
    <TargetPlatformVersion Condition="'$(TargetPlatformVersion)' == ''">7.0</TargetPlatformVersion>
    <TargetPlatformSdkPath Condition="'$(TargetPlatformSdkPath)' == '' and '$(TargetPlatformSdkRootOverride)' != ''">$(TargetPlatformSdkRootOverride)\</TargetPlatformSdkPath>
    <TargetPlatformSdkPath Condition="'$(TargetPlatformSdkPath)' == '' and '$(TargetPlatformIdentifier)' == 'Windows' and '$(OS)' == 'Windows_NT' and '$(MSBuildRuntimeType)' != 'Core'">$([MSBuild]::GetRegistryValueFromView('HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SDKs\Windows\v$(TargetPlatformVersion)', InstallationFolder, null, RegistryView.Registry32, RegistryView.Default))</TargetPlatformSdkPath>
    <TargetPlatformSdkPath Condition="'$(TargetPlatformSdkPath)' == ''">$([Microsoft.Build.Utilities.ToolLocationHelper]::GetPlatformSDKLocation($(TargetPlatformIdentifier), $(TargetPlatformVersion)))</TargetPlatformSdkPath>
    <TargetPlatformSdkMetadataLocation Condition="'$(TargetPlatformSdkMetadataLocation)' == '' and Exists('$(TargetPlatformSdkPath)')">$(TargetPlatformSdkPath)Windows Metadata</TargetPlatformSdkMetadataLocation>
    <TargetPlatformSdkMetadataLocation Condition="Exists('$(TargetPlatformSdkPath)') and ('$(TargetPlatformSdkMetadataLocation)' == '' or !Exists('$(TargetPlatformSdkMetadataLocation)'))">$(TargetPlatformSdkPath)References\CommonConfiguration\Neutral</TargetPlatformSdkMetadataLocation>
    <TargetPlatformWinMDLocation Condition="'$(TargetPlatformWinMDLocation)' == '' and Exists('$(TargetPlatformSdkMetadataLocation)')">$(TargetPlatformSdkMetadataLocation)</TargetPlatformWinMDLocation>
    <UseOSWinMdReferences Condition="'$(UseOSWinMdReferences)' == '' and ('$(TargetPlatformWinMDLocation)' == '' and '$(TargetPlatformIdentifier)' == 'Windows' and '$(TargetPlatformVersion)' &gt; '7.0')">true</UseOSWinMdReferences>
    <TargetPlatformWinMDLocation Condition="'$(UseOsWinMdReferences)' == 'true'">$(WinDir)\System32\WinMetadata</TargetPlatformWinMDLocation>
    <TargetPlatformMoniker Condition="'$(TargetPlatformMoniker)' == ''">$(TargetPlatformIdentifier),Version=$(TargetPlatformVersion)</TargetPlatformMoniker>
    <TargetPlatformDisplayName Condition="'$(TargetPlatformDisplayName)' == ''">$([Microsoft.Build.Utilities.ToolLocationHelper]::GetPlatformSDKDisplayName($(TargetPlatformIdentifier), $(TargetPlatformVersion)))</TargetPlatformDisplayName>
  </PropertyGroup>

<!--
    Several properties must be set in the main project file, before using this .TARGETS file.
    However, if the properties are not set, we pick some defaults.

OutDir:
    Indicates the final output location for the project or solution. When building a solution,
    OutDir can be used to gather multiple project outputs in one location. In addition,
    OutDir is included in AssemblySearchPaths used for resolving references.

OutputPath:
    This property is usually specified in the project file and is used to initialize OutDir.
    OutDir and OutputPath are distinguished for legacy reasons, and OutDir should be used if at all possible.

BaseIntermediateOutputPath:
    This is the top level folder where all configuration specific intermediate output folders will be created.
    Default value is obj\

IntermediateOutputPath:
    This is the full intermediate Output Path, and is derived from BaseIntermediateOutputPath, if none specified
    (eg. obj\debug). If this property is overridden, then setting BaseIntermediateOutputPath has no effect.
    -->

<PropertyGroup>
      
    <_DebugFileExt Condition="'$(_DebugFileExt)' == ''">.pdb</_DebugFileExt>
    
    <OutputPath Condition="'$(OutputPath)' != '' and !HasTrailingSlash('$(OutputPath)')">$(OutputPath)\</OutputPath>
    <AssemblyName Condition=" '$(AssemblyName)'=='' ">$(MSBuildProjectName)</AssemblyName>
    
    <OutputPath Condition=" '$(Platform)'=='' and '$(Configuration)'=='' and '$(OutputPath)'=='' ">bin\Debug\</OutputPath>
    <_OriginalConfiguration>$(Configuration)</_OriginalConfiguration>
    <_OriginalPlatform>$(Platform)</_OriginalPlatform>
    <Configuration Condition=" '$(Configuration)'=='' ">Debug</Configuration>
    <ConfigurationName Condition=" '$(ConfigurationName)' == '' ">$(Configuration)</ConfigurationName>
    
    <Platform Condition=" '$(Platform)'=='' ">AnyCPU</Platform>

<OutputType Condition=" '$(TargetType)' != ''">$(TargetType)</OutputType>
    <OutputType Condition=" '$(TargetType)' == 'Container' or '$(TargetType)' == 'DocumentContainer' ">library</OutputType>
    <OutputType Condition=" '$(OutputType)' == '' ">exe</OutputType>

<_DebugSymbolsProduced>false</_DebugSymbolsProduced>
    <_DebugSymbolsProduced Condition="'$(DebugSymbols)'=='true'">true</_DebugSymbolsProduced>
    <_DebugSymbolsProduced Condition="'$(DebugType)'=='none'">false</_DebugSymbolsProduced>
    <_DebugSymbolsProduced Condition="'$(DebugType)'=='pdbonly'">true</_DebugSymbolsProduced>
    <_DebugSymbolsProduced Condition="'$(DebugType)'=='full'">true</_DebugSymbolsProduced>
    <_DebugSymbolsProduced Condition="'$(DebugType)'=='portable'">true</_DebugSymbolsProduced>
    <_DebugSymbolsProduced Condition="'$(DebugType)'=='embedded'">false</_DebugSymbolsProduced>

<_DocumentationFileProduced>true</_DocumentationFileProduced>
    <_DocumentationFileProduced Condition="'$(DocumentationFile)'==''">false</_DocumentationFileProduced>

<ProduceReferenceAssembly Condition="'$(ProduceReferenceAssembly)' == ''">false</ProduceReferenceAssembly>
  </PropertyGroup>

<PropertyGroup>
    <TargetExt Condition="'$(TargetExt)' == '' and '$(OutputType)'=='exe'">.exe</TargetExt>
    <TargetExt Condition="'$(TargetExt)' == '' and '$(OutputType)'=='winexe'">.exe</TargetExt>
    <TargetExt Condition="'$(TargetExt)' == '' and '$(OutputType)'=='appcontainerexe'">.exe</TargetExt>
    <TargetExt Condition="'$(TargetExt)' == '' and '$(OutputType)'=='library'">.dll</TargetExt>
    <TargetExt Condition="'$(TargetExt)' == '' and '$(OutputType)'=='module'">.netmodule</TargetExt>
    <TargetExt Condition="'$(TargetExt)' == '' and '$(OutputType)'=='winmdobj'">.winmdobj</TargetExt>
  </PropertyGroup>

<OutDirWasSpecified Condition=" '$(OutDir)'!='' and '$(OutDirWasSpecified)'=='' ">true</OutDirWasSpecified>

<OutDir Condition=" '$(OutDir)' == '' ">$(OutputPath)</OutDir>
    
    
    <OutDir Condition="'$(OutDir)' != '' and !HasTrailingSlash('$(OutDir)')">$(OutDir)\</OutDir>
    <ProjectName Condition=" '$(ProjectName)' == '' ">$(MSBuildProjectName)</ProjectName>

<OutDir Condition="'$(OutDir)' != '' and '$(OutDirWasSpecified)' == 'true' and (('$(WindowsAppContainer)' == 'true' and '$(GenerateProjectSpecificOutputFolder)' != 'false') or '$(GenerateProjectSpecificOutputFolder)' == 'true')">$(OutDir)$(ProjectName)\</OutDir>

<TargetName Condition="'$(TargetName)' == '' and '$(OutputType)' == 'winmdobj' and '$(RootNamespace)' != ''">$(RootNamespace)</TargetName>
    <TargetName Condition=" '$(TargetName)' == '' ">$(AssemblyName)</TargetName>
    
    <ProjectFileName Condition=" '$(ProjectFileName)' == '' ">$(MSBuildProjectFile)</ProjectFileName>
    
    <ProjectExt Condition=" '$(ProjectExt)' == '' ">$(MSBuildProjectExtension)</ProjectExt>
    
    <WinMDExpOutputWindowsMetadataFilename Condition="'$(WinMDExpOutputWindowsMetadataFilename)' == '' and '$(OutputType)' == 'winmdobj'">$(TargetName).winmd</WinMDExpOutputWindowsMetadataFilename>
    <TargetFileName Condition=" '$(TargetFileName)' == '' and '$(OutputType)' == 'winmdobj'">$(WinMDExpOutputWindowsMetadataFilename)</TargetFileName>
    <TargetFileName Condition=" '$(TargetFileName)' == '' ">$(TargetName)$(TargetExt)</TargetFileName>

</PropertyGroup>

<PropertyGroup>
    
    <_DeploymentPublishableProjectDefault Condition="'$(OutputType)'=='winexe' or '$(OutputType)'=='exe' or '$(OutputType)'=='appcontainerexe'">true</_DeploymentPublishableProjectDefault>
    <PublishableProject Condition="'$(PublishableProject)'==''">$(_DeploymentPublishableProjectDefault)</PublishableProject>

<_DeploymentTargetApplicationManifestFileName Condition="'$(OutputType)'=='library'">Native.$(AssemblyName).manifest</_DeploymentTargetApplicationManifestFileName>
    
    <_DeploymentTargetApplicationManifestFileName Condition="'$(OutputType)'=='winexe'">$(TargetFileName).manifest</_DeploymentTargetApplicationManifestFileName>
    
    <_DeploymentTargetApplicationManifestFileName Condition="'$(OutputType)'=='exe'">$(TargetFileName).manifest</_DeploymentTargetApplicationManifestFileName>
    
    <_DeploymentTargetApplicationManifestFileName Condition="'$(OutputType)'=='appcontainerexe'">$(TargetFileName).manifest</_DeploymentTargetApplicationManifestFileName>
    
    <TargetDeployManifestFileName Condition="'$(TargetDeployManifestFileName)' == '' and '$(HostInBrowser)' != 'true'">$(AssemblyName).application</TargetDeployManifestFileName>
    
    <TargetDeployManifestFileName Condition="'$(TargetDeployManifestFileName)' == '' and '$(HostInBrowser)' == 'true'">$(AssemblyName).xbap</TargetDeployManifestFileName>
    
    <GenerateClickOnceManifests Condition="'$(OutputType)'=='winexe' or '$(OutputType)'=='exe' or '$(OutputType)'=='appcontainerexe'">$(GenerateManifests)</GenerateClickOnceManifests>

<_DeploymentApplicationManifestIdentity Condition="'$(OutputType)'=='library'">Native.$(AssemblyName)</_DeploymentApplicationManifestIdentity>
    <_DeploymentApplicationManifestIdentity Condition="'$(OutputType)'=='winexe'">$(AssemblyName).exe</_DeploymentApplicationManifestIdentity>
    <_DeploymentApplicationManifestIdentity Condition="'$(OutputType)'=='exe'">$(AssemblyName).exe</_DeploymentApplicationManifestIdentity>
    <_DeploymentApplicationManifestIdentity Condition="'$(OutputType)'=='appcontainerexe'">$(AssemblyName).exe</_DeploymentApplicationManifestIdentity>
    <_DeploymentDeployManifestIdentity Condition="'$(HostInBrowser)' != 'true'">$(AssemblyName).application</_DeploymentDeployManifestIdentity>
    <_DeploymentDeployManifestIdentity Condition="'$(HostInBrowser)' == 'true'">$(AssemblyName).xbap</_DeploymentDeployManifestIdentity>

<_DeploymentFileMappingExtension Condition="'$(MapFileExtensions)'=='true'">.deploy</_DeploymentFileMappingExtension>
    <_DeploymentFileMappingExtension Condition="'$(MapFileExtensions)'!='true'"></_DeploymentFileMappingExtension>

<_DeploymentBuiltUpdateInterval Condition="'$(UpdatePeriodically)'=='true'">$(UpdateInterval)</_DeploymentBuiltUpdateInterval>
    <_DeploymentBuiltUpdateIntervalUnits Condition="'$(UpdatePeriodically)'=='true'">$(UpdateIntervalUnits)</_DeploymentBuiltUpdateIntervalUnits>
    <_DeploymentBuiltUpdateInterval Condition="'$(UpdatePeriodically)'!='true'">0</_DeploymentBuiltUpdateInterval>
    <_DeploymentBuiltUpdateIntervalUnits Condition="'$(UpdatePeriodically)'!='true'">Days</_DeploymentBuiltUpdateIntervalUnits>
    <_DeploymentBuiltMinimumRequiredVersion Condition="'$(UpdateRequired)'=='true' and '$(Install)'=='true'">$(MinimumRequiredVersion)</_DeploymentBuiltMinimumRequiredVersion>

<PropertyGroup>
    
    <TargetCulture Condition="'$(TargetCulture)'==''">*</TargetCulture>
    <FallbackCulture Condition="'$(UICulture)'!='' and '$(FallbackCulture)'==''">$(UICulture)</FallbackCulture>
  </PropertyGroup>

<_UnmanagedRegistrationCache Include="$(BaseIntermediateOutputPath)$(MSBuildProjectFile).UnmanagedRegistration.cache"/>
    <_ResolveComReferenceCache Include="$(IntermediateOutputPath)$(MSBuildProjectFile).ResolveComReference.cache"/>
  </ItemGroup>

<PropertyGroup>
    
    
    <TargetDir Condition="'$(OutDir)' != ''">$([MSBuild]::Escape($([System.IO.Path]::GetFullPath(`$([System.IO.Path]::Combine(`$(MSBuildProjectDirectory)`, `$(OutDir)`))`))))</TargetDir>

<TargetPath Condition=" '$(TargetPath)' == '' ">$(TargetDir)$(TargetFileName)</TargetPath>

<TargetRefPath Condition=" '$(TargetRefPath)' == '' and '$(ProduceReferenceAssembly)' == 'true' ">$([MSBuild]::NormalizePath($(TargetDir), 'ref', $(TargetFileName)))</TargetRefPath>

<ProjectDir Condition=" '$(ProjectDir)' == '' ">$(MSBuildProjectDirectory)\</ProjectDir>

<ProjectPath Condition=" '$(ProjectPath)' == '' ">$(ProjectDir)$(ProjectFileName)</ProjectPath>

<PlatformName Condition=" '$(PlatformName)' == '' ">$(Platform)</PlatformName>
  </PropertyGroup>

<PropertyGroup>
    <DevEnvDir Condition="'$(DevEnvDir)'==''">*Undefined*</DevEnvDir>
    <SolutionName Condition="'$(SolutionName)'==''">*Undefined*</SolutionName>
    
    <SolutionFileName Condition="'$(SolutionFileName)'==''">*Undefined*</SolutionFileName>
    
    <SolutionPath Condition="'$(SolutionPath)'==''">*Undefined*</SolutionPath>
    
    <SolutionDir Condition="'$(SolutionDir)'==''">*Undefined*</SolutionDir>
    
    <SolutionExt Condition="'$(SolutionExt)'==''">*Undefined*</SolutionExt>
    
  </PropertyGroup>

<PropertyGroup>
    <GenerateBindingRedirectsOutputType Condition="'$(OutputType)'=='exe' or '$(OutputType)'=='winexe'">true</GenerateBindingRedirectsOutputType>
    
    <AutoGenerateBindingRedirects Condition="'$(AutoGenerateBindingRedirects)' == '' and '$(TargetFrameworkIdentifier)' == '.NETFramework' and '$(TargetFrameworkVersion.TrimStart(vV))' >= '4.7.2'">true</AutoGenerateBindingRedirects>
  </PropertyGroup>
  <PropertyGroup Condition="'$(AutoUnifyAssemblyReferences)' == ''">
    <AutoUnifyAssemblyReferences>true</AutoUnifyAssemblyReferences>
    <AutoUnifyAssemblyReferences Condition="'$(GenerateBindingRedirectsOutputType)' == 'true' and '$(AutoGenerateBindingRedirects)' != 'true'">false</AutoUnifyAssemblyReferences>
  </PropertyGroup>
  <PropertyGroup>
    <BaseIntermediateOutputPath Condition="!HasTrailingSlash('$(BaseIntermediateOutputPath)')">$(BaseIntermediateOutputPath)\</BaseIntermediateOutputPath>
    <CleanFile Condition="'$(CleanFile)'==''">$(MSBuildProjectFile).FileListAbsolute.txt</CleanFile>
    
    <BuildProjectReferences Condition="'$(BuildProjectReferences)' == '' and '$(DesignTimeBuild)' == 'true'">false</BuildProjectReferences>
    
    <BuildProjectReferences Condition="'$(BuildProjectReferences)' == ''">true</BuildProjectReferences>
    <BuildInParallel Condition="'$(BuildInParallel)' == ''">true</BuildInParallel>
    <_ResolveReferenceDependencies Condition="'$(_ResolveReferenceDependencies)' == ''">false</_ResolveReferenceDependencies>
    <_GetChildProjectCopyToOutputDirectoryItems Condition="'$(_GetChildProjectCopyToOutputDirectoryItems)' == ''">true</_GetChildProjectCopyToOutputDirectoryItems>
    <OverwriteReadOnlyFiles Condition="'$(OverwriteReadOnlyFiles)' == ''">false</OverwriteReadOnlyFiles>
    <ComReferenceNoClassMembers Condition="'$(ComReferenceNoClassMembers)' == ''">false</ComReferenceNoClassMembers>
  </PropertyGroup>

<PropertyGroup Condition=" $(IntermediateOutputPath) == '' ">
    <IntermediateOutputPath Condition=" '$(PlatformName)' == 'AnyCPU' ">$(BaseIntermediateOutputPath)$(Configuration)\</IntermediateOutputPath>
    <IntermediateOutputPath Condition=" '$(PlatformName)' != 'AnyCPU' ">$(BaseIntermediateOutputPath)$(PlatformName)\$(Configuration)\</IntermediateOutputPath>
  </PropertyGroup>
  <PropertyGroup>
    <IntermediateOutputPath Condition="!HasTrailingSlash('$(IntermediateOutputPath)')">$(IntermediateOutputPath)\</IntermediateOutputPath>
    <_GenerateBindingRedirectsIntermediateAppConfig>$(IntermediateOutputPath)$(TargetFileName).config</_GenerateBindingRedirectsIntermediateAppConfig>
  </PropertyGroup>
  <ItemGroup>
    <IntermediateAssembly Include="$(IntermediateOutputPath)$(TargetName)$(TargetExt)"/>
    <FinalDocFile Include="@(DocFileItem->'$(OutDir)%(Filename)%(Extension)')"/>
    <CopyUpToDateMarker Include="$([MSBuild]::NormalizePath('$(MSBuildProjectDirectory)', '$(IntermediateOutputPath)', '$(MSBuildProjectFile).CopyComplete'))" />
  </ItemGroup>

<ItemGroup Condition="'$(ProduceReferenceAssembly)' == 'true'">
    <IntermediateRefAssembly Include="$(IntermediateOutputPath)ref\$(TargetName)$(TargetExt)" Condition="'@(IntermediateRefAssembly)' == ''" />
    <CreateDirectory Include="@(IntermediateRefAssembly->'%(RootDir)%(Directory)')" />
    <CreateDirectory Include="$(OutDir)ref" />
  </ItemGroup>

<ItemGroup Condition="'$(_DebugSymbolsProduced)' == 'true'">
    <_DebugSymbolsIntermediatePath Include="$(IntermediateOutputPath)$(TargetName).compile.pdb" Condition="'$(OutputType)' == 'winmdobj' and '@(_DebugSymbolsIntermediatePath)' == ''"/>
    <_DebugSymbolsIntermediatePath Include="$(IntermediateOutputPath)$(TargetName)$(_DebugFileExt)" Condition="'$(OutputType)' != 'winmdobj' and '@(_DebugSymbolsIntermediatePath)' == '' and '$(_DebugFileExt)' == '.pdb'"/>
    
    <_DebugSymbolsIntermediatePath Include="$(IntermediateOutputPath)$(TargetName)$(TargetExt)$(_DebugFileExt)" Condition="'$(OutputType)' != 'winmdobj' and '@(_DebugSymbolsIntermediatePath)' == '' and '$(_DebugFileExt)' != '.pdb'"/>
    <_DebugSymbolsOutputPath Include="@(_DebugSymbolsIntermediatePath->'$(OutDir)%(Filename)%(Extension)')" />
  </ItemGroup>

<PropertyGroup Condition="'$(_DebugSymbolsProduced)' == 'true' and '$(OutputType)' == 'winmdobj'">
    <WinMDExpOutputPdb Condition="'$(WinMDExpOutputPdb)' == ''">$(IntermediateOutputPath)$(TargetName).pdb</WinMDExpOutputPdb>
    <_WinMDDebugSymbolsOutputPath>$([System.IO.Path]::Combine('$(OutDir)', $([System.IO.Path]::GetFileName('$(WinMDExpOutputPdb)'))))</_WinMDDebugSymbolsOutputPath>
  </PropertyGroup>

<PropertyGroup Condition="'$(OutputType)' == 'winmdobj' and '$(DocumentationFile)'!=''">
    <WinMDOutputDocumentationFile Condition="'$(WinMDOutputDocumentationFile)' == ''">$(IntermediateOutputPath)$(TargetName).xml</WinMDOutputDocumentationFile>
    <_WinMDDocFileOutputPath>$([System.IO.Path]::Combine('$(OutDir)', $([System.IO.Path]::GetFileName('$(WinMDOutputDocumentationFile)'))))</_WinMDDocFileOutputPath>
  </PropertyGroup>

<PropertyGroup Condition="'$(WinMDExpOutputWindowsMetadataFilename)' != ''">
    <_IntermediateWindowsMetadataPath>$(IntermediateOutputPath)$(WinMDExpOutputWindowsMetadataFilename)</_IntermediateWindowsMetadataPath>
    <_WindowsMetadataOutputPath>$(OutDir)$(WinMDExpOutputWindowsMetadataFilename)</_WindowsMetadataOutputPath>
  </PropertyGroup>

<ItemGroup>
    
    <_DeploymentManifestEntryPoint Include="@(IntermediateAssembly)">
      <TargetPath>$(TargetFileName)</TargetPath>
    </_DeploymentManifestEntryPoint>

<_DeploymentManifestIconFile Include="$(ApplicationIcon)" Condition="Exists('$(ApplicationIcon)')">
      <TargetPath>$(ApplicationIcon)</TargetPath>
    </_DeploymentManifestIconFile>

<ApplicationManifest Include="$(IntermediateOutputPath)$(_DeploymentTargetApplicationManifestFileName)">
      <TargetPath>$(_DeploymentTargetApplicationManifestFileName)</TargetPath>
    </ApplicationManifest>

<_ApplicationManifestFinal Include="$(OutDir)$(_DeploymentTargetApplicationManifestFileName)">
      <TargetPath>$(_DeploymentTargetApplicationManifestFileName)</TargetPath>
    </_ApplicationManifestFinal>

<DeployManifest Include="$(IntermediateOutputPath)$(TargetDeployManifestFileName)">
      <TargetPath>$(TargetDeployManifestFileName)</TargetPath>
    </DeployManifest>

<_DeploymentIntermediateTrustInfoFile Include="$(IntermediateOutputPath)$(TargetName).TrustInfo.xml" Condition="'$(TargetZone)'!=''"/>
  </ItemGroup>

<PropertyGroup>
    <_DeploymentUrl Condition="'$(_DeploymentUrl)'==''">$(UpdateUrl)</_DeploymentUrl>
    <_DeploymentUrl Condition="'$(_DeploymentUrl)'==''">$(InstallUrl)</_DeploymentUrl>
    <_DeploymentUrl Condition="'$(_DeploymentUrl)'==''">$(PublishUrl)</_DeploymentUrl>
    <_DeploymentUrl Condition="!('$(UpdateUrl)'=='') and '$(Install)'=='false'"></_DeploymentUrl>
    <_DeploymentUrl Condition="'$(_DeploymentUrl)'!=''">$(_DeploymentUrl)$(TargetDeployManifestFileName)</_DeploymentUrl>
    
    <_DeploymentUrl Condition="'$(UpdateUrl)'=='' and !('$(Install)'=='true' and '$(UpdateEnabled)'=='true')"></_DeploymentUrl>
    <_DeploymentUrl Condition="'$(ExcludeDeploymentUrl)'=='true'"></_DeploymentUrl>
  </PropertyGroup>

<PropertyGroup>
    <_DeploymentApplicationUrl Condition="'$(IsWebBootstrapper)'=='true'">$(InstallUrl)</_DeploymentApplicationUrl>
    <_DeploymentApplicationUrl Condition="'$(IsWebBootstrapper)'=='true' and '$(InstallUrl)'==''">$(PublishUrl)</_DeploymentApplicationUrl>
    <_DeploymentComponentsUrl Condition="'$(BootstrapperComponentsLocation)'=='Absolute'">$(BootstrapperComponentsUrl)</_DeploymentComponentsUrl>
  </PropertyGroup>

<PropertyGroup>
    <PublishDir Condition="'$(PublishDir)' != '' and !HasTrailingSlash('$(PublishDir)')">$(PublishDir)\</PublishDir>
    <PublishDir Condition="'$(PublishDir)'==''">$(OutputPath)app.publish\</PublishDir>
  </PropertyGroup>

<PropertyGroup Condition="'$(ProcessorArchitecture)'==''">
    
    <ProcessorArchitecture>$(PlatformTarget)</ProcessorArchitecture>

<ProcessorArchitecture Condition=" '$(PlatformTarget)' == 'AnyCpu' ">msil</ProcessorArchitecture>
    <ProcessorArchitecture Condition=" '$(PlatformTarget)' == 'x64' ">amd64</ProcessorArchitecture>
    <ProcessorArchitecture Condition=" '$(PlatformTarget)' == 'Itanium' ">ia64</ProcessorArchitecture>
    <ProcessorArchitecture Condition=" '$(PlatformTarget)' == 'x86' ">x86</ProcessorArchitecture>
    <ProcessorArchitecture Condition=" '$(PlatformTarget)' == 'ARM' ">arm</ProcessorArchitecture>
  </PropertyGroup>

<PropertyGroup Condition="'$(ProcessorArchitecture)' == '' and '$(ConsiderPlatformAsProcessorArchitecture)' == 'true'">
    
    <ProcessorArchitectureAsPlatform>$(Platform)</ProcessorArchitectureAsPlatform>
    <ProcessorArchitecture Condition=" '$(ProcessorArchitectureAsPlatform)' == 'AnyCpu' or '$(ProcessorArchitectureAsPlatform)' == 'Any Cpu'">msil</ProcessorArchitecture>
    <ProcessorArchitecture Condition=" '$(ProcessorArchitectureAsPlatform)' == 'x64' or '$(ProcessorArchitectureAsPlatform)' == 'amd64'">amd64</ProcessorArchitecture>
    <ProcessorArchitecture Condition=" '$(ProcessorArchitectureAsPlatform)' == 'Itanium' ">ia64</ProcessorArchitecture>
    <ProcessorArchitecture Condition=" '$(ProcessorArchitectureAsPlatform)' == 'x86' or '$(ProcessorArchitectureAsPlatform)' == 'win32'">x86</ProcessorArchitecture>
    <ProcessorArchitecture Condition=" '$(ProcessorArchitectureAsPlatform)' == 'ARM' ">arm</ProcessorArchitecture>

<ResolveAssemblyWarnOrErrorOnTargetArchitectureMismatch Condition="'$(ProcessorArchitecture)'==''">None</ResolveAssemblyWarnOrErrorOnTargetArchitectureMismatch>
    <ProcessorArchitecture Condition="'$(ProcessorArchitecture)'==''">$(PROCESSOR_ARCHITECTURE)</ProcessorArchitecture>
  </PropertyGroup>

<PropertyGroup Condition="'$(DisableOutOfProcTaskHost)' == '' and '$(MSBuildRuntimeType)' == 'Full'">
    <TargetFrameworkAsMSBuildRuntime Condition="'$(TargetFrameworkVersion)' == 'v2.0' or '$(TargetFrameworkVersion)' == 'v3.0' or '$(TargetFrameworkVersion)' == 'v3.5'">CLR2</TargetFrameworkAsMSBuildRuntime>
    <TargetFrameworkAsMSBuildRuntime Condition="'$(TargetFrameworkVersion)' == 'v4.0' or '$(TargetFrameworkVersion)' == 'v4.5'">CLR4</TargetFrameworkAsMSBuildRuntime>
    <TargetFrameworkAsMSBuildRuntime Condition="'$(TargetFrameworkAsMSBuildRuntime)' == ''">CurrentRuntime</TargetFrameworkAsMSBuildRuntime>

<PlatformTargetAsMSBuildArchitectureExplicitlySet Condition="'$(PlatformTargetAsMSBuildArchitecture)' != ''">true</PlatformTargetAsMSBuildArchitectureExplicitlySet>
    <PlatformTargetAsMSBuildArchitectureExplicitlySet Condition="'$(PlatformTargetAsMSBuildArchitecture)' == ''">false</PlatformTargetAsMSBuildArchitectureExplicitlySet>

<PlatformTargetAsMSBuildArchitecture Condition="'$(PlatformTarget)' == 'x86' or ('$(PlatformTarget)' == 'x64' and '$(MSBuildExtensionsPath64)' != '')">$(PlatformTarget)</PlatformTargetAsMSBuildArchitecture>
    <PlatformTargetAsMSBuildArchitecture Condition="'$(PlatformTarget)' == 'arm'">x86</PlatformTargetAsMSBuildArchitecture>
    <PlatformTargetAsMSBuildArchitecture Condition="('$(PlatformTarget)' == 'ia64' and '$(MSBuildExtensionsPath64)' != '')">x64</PlatformTargetAsMSBuildArchitecture>
    <PlatformTargetAsMSBuildArchitecture Condition="'$(PlatformTargetAsMSBuildArchitecture)' == ''">CurrentArchitecture</PlatformTargetAsMSBuildArchitecture>
  </PropertyGroup>

<PropertyGroup>
    <ProjectFlavor Condition="'$(ProjectFlavor)'==''">Client</ProjectFlavor>
  </PropertyGroup>

<PropertyGroup>
    <DelaySign Condition="'$(SignAssembly)' != 'true'">false</DelaySign>
    <DelaySign Condition="'$(DelaySign)'!='true'"></DelaySign>
  </PropertyGroup>

<PropertyGroup>
    <WebReference_EnableProperties Condition=" '$(WebReference_EnableProperties)' == '' ">true</WebReference_EnableProperties>
    <WebReference_EnableSQLTypes Condition=" '$(WebReference_EnableSQLTypes)' == '' ">true</WebReference_EnableSQLTypes>
    <WebReference_EnableLegacyEventingModel Condition=" '$(WebReference_EnableLegacyEventingModel)' == '' ">false</WebReference_EnableLegacyEventingModel>
  </PropertyGroup>

<PropertyGroup>
    <AssemblyFoldersSuffix Condition=" '$(AssemblyFoldersSuffix)' == '' ">AssemblyFoldersEx</AssemblyFoldersSuffix>
    <FrameworkRegistryBase Condition=" '$(FrameworkRegistryBase)' == '' ">Software\Microsoft\$(TargetFrameworkIdentifier)</FrameworkRegistryBase>
    <TargetPlatformRegistryBase Condition="'$(TargetPlatformRegistryBase)' == ''">Software\Microsoft\Microsoft SDKs\$(TargetPlatformIdentifier)</TargetPlatformRegistryBase>
    <AssemblyFoldersConfigFile Condition="'$(AssemblyFoldersConfigFile)' == ''">$(MSBuildToolsPath32)\AssemblyFolders.config</AssemblyFoldersConfigFile>
    <AssemblyFoldersConfigFileSearchPath Condition="Exists('$(AssemblyFoldersConfigFile)')">{AssemblyFoldersFromConfig:$(AssemblyFoldersConfigFile),$(TargetFrameworkVersion)};</AssemblyFoldersConfigFileSearchPath>
    <!--
        The SearchPaths property is set to find assemblies in the following order:

(1) Files from current project - indicated by {CandidateAssemblyFiles}
            (2) $(ReferencePath) - the reference path property, which comes from the .USER file.
            (3) The hintpath from the referenced item itself, indicated by {HintPathFromItem}.
            (4) The directory of MSBuild's "target" runtime from GetFrameworkPath.
                The "target" runtime folder is the folder of the runtime that MSBuild is a part of.
            (5) Registered assembly folders, indicated by {Registry:*,*,*}
            (6) Assembly folders from AssemblyFolders.config file (provided by Visual Studio Dev15+).
            (7) Legacy registered assembly folders, indicated by {AssemblyFolders}
            (8) Resolve to the GAC.
            (9) Treat the reference's Include as if it were a real file name.
            (10) Look in the application's output folder (like bin\debug)
        -->
    <AssemblySearchPaths Condition=" '$(AssemblySearchPaths)' == ''">
      {CandidateAssemblyFiles};
      $(ReferencePath);
      {HintPathFromItem};
      {TargetFrameworkDirectory};
      $(AssemblyFoldersConfigFileSearchPath)
      {Registry:$(FrameworkRegistryBase),$(TargetFrameworkVersion),$(AssemblyFoldersSuffix)$(AssemblyFoldersExConditions)};
      {AssemblyFolders};
      {GAC};
      {RawFileName};
      $(OutDir)
    </AssemblySearchPaths>

<AllowedReferenceAssemblyFileExtensions Condition=" '$(AllowedReferenceAssemblyFileExtensions)' == '' ">
      .winmd;
      .dll;
      .exe
    </AllowedReferenceAssemblyFileExtensions>

<AllowedReferenceRelatedDebugFileExtensions Condition="'$(AllowedReferenceRelatedDebugFileExtensions)' == ''">
      .pdb;
    </AllowedReferenceRelatedDebugFileExtensions>

<AllowedReferenceRelatedFileExtensions Condition=" '$(AllowedReferenceRelatedFileExtensions)' == '' ">
      $(AllowedReferenceRelatedDebugFileExtensions);
      .xml;
      .pri;
      .dll.config;
      .exe.config
    </AllowedReferenceRelatedFileExtensions>

<FullReferenceAssemblyNames Condition="'$(FullReferenceAssemblyNames)' == ''">Full</FullReferenceAssemblyNames>
  </PropertyGroup>

<PropertyGroup>
    <ContinueOnError Condition="'$(ContinueOnError)' == ''">false</ContinueOnError>
  </PropertyGroup>

<PropertyGroup>
    <CommonXamlResourcesDirectory Condition=" '$(CommonXamlResourcesDirectory)' == '' ">$(MSBuildThisFileDirectory)$(LangName)\</CommonXamlResourcesDirectory>
  </PropertyGroup>

<PropertyGroup Condition="!Exists('$(CommonXamlResourcesDirectory)')">
    <CommonXamlResourcesDirectory>$(MSBuildThisFileDirectory)en-US\</CommonXamlResourcesDirectory>
  </PropertyGroup>

<PropertyPageSchema Include="
                        $(CommonXamlResourcesDirectory)General.xaml;
                        $(CommonXamlResourcesDirectory)Debugger_General.xaml">
      <Context>Project</Context>
    </PropertyPageSchema>

<PropertyPageSchema Include="$(CommonXamlResourcesDirectory)General.BrowseObject.xaml">
      <Context>BrowseObject</Context>
    </PropertyPageSchema>

<PropertyPageSchema Include="$(CommonXamlResourcesDirectory)SCC.xaml">
      <Context>Invisible</Context>
    </PropertyPageSchema>

<PropertyPageSchema Include="
                        $(CommonXamlResourcesDirectory)Folder.xaml;
                        $(CommonXamlResourcesDirectory)None.xaml;
                        $(CommonXamlResourcesDirectory)Content.xaml;
                        $(CommonXamlResourcesDirectory)EmbeddedResource.xaml;
                        ">
      <Context>File;BrowseObject</Context>
    </PropertyPageSchema>

<PropertyPageSchema Include="$(CommonXamlResourcesDirectory)SpecialFolder.xaml;">
      <Context>File;ProjectSubscriptionService</Context>
    </PropertyPageSchema>
  </ItemGroup>

<PropertyGroup>
    <DefineCommonReferenceSchemas Condition=" '$(DefineCommonReferenceSchemas)' == '' ">$(DefineCommonItemSchemas)</DefineCommonReferenceSchemas>
  </PropertyGroup>

<ItemGroup Condition=" '$(DefineCommonReferenceSchemas)' == 'true' ">
    
    <PropertyPageSchema Include="$(CommonXamlResourcesDirectory)assemblyreference.xaml">
      <Context>;BrowseObject</Context>
    </PropertyPageSchema>
    <PropertyPageSchema Include="$(CommonXamlResourcesDirectory)ResolvedAssemblyReference.xaml">
      <Context>ProjectSubscriptionService;BrowseObject</Context>
    </PropertyPageSchema>

<PropertyPageSchema Include="$(CommonXamlResourcesDirectory)COMReference.xaml">
      <Context>;BrowseObject</Context>
    </PropertyPageSchema>
    <PropertyPageSchema Include="$(CommonXamlResourcesDirectory)ResolvedCOMReference.xaml">
      <Context>ProjectSubscriptionService;BrowseObject</Context>
    </PropertyPageSchema>

<PropertyPageSchema Include="$(CommonXamlResourcesDirectory)ProjectReference.xaml">
      <Context>;BrowseObject</Context>
    </PropertyPageSchema>
    <PropertyPageSchema Include="$(CommonXamlResourcesDirectory)ResolvedProjectReference.xaml">
      <Context>ProjectSubscriptionService;BrowseObject</Context>
    </PropertyPageSchema>
  </ItemGroup>

<ItemDefinitionGroup Condition=" '$(DefineExplicitDefaults)' == 'true' ">
    <None>
      <CopyToOutputDirectory>Never</CopyToOutputDirectory>
    </None>
    <Content>
      <CopyToOutputDirectory>Never</CopyToOutputDirectory>
    </Content>
    <Compile>
      <CopyToOutputDirectory>Never</CopyToOutputDirectory>
    </Compile>
    <EmbeddedResource>
      <CopyToOutputDirectory>Never</CopyToOutputDirectory>
    </EmbeddedResource>
  </ItemDefinitionGroup>

<!--
    Target that allows targets consuming source control confirmation to establish a dependency on targets producing this information.

Any target that reads SourceRevisionId, PrivateRepositoryUrl, SourceRoot, and other source control properties and items
    should depend on this target and be conditioned on '$(SourceControlInformationFeatureSupported)' == 'true'.

SourceRevisionId property uniquely identifies the source control revision of the repository the project belongs to.
    For Git repositories this id is a commit hash, for TFVC repositories it's the changeset number, etc.

PrivateRepositoryUrl property stores the URL of the repository supplied by the CI server or retrieved from source control manager.
    Targets consuming this property shall not publish its value implicitly as it might inadvertently reveal an internal URL.
    Instead, they shall only do so if the project sets PublishRepositoryUrl property to true. For example, the NuGet Pack target
    may include the repository URL in the nuspec file generated for NuGet package produced by the project if PublishRepositoryUrl is true.

SourceRoot item group lists all source roots that the project source files reside under and their mapping to source control server URLs,
    if available. This includes both source files under source control as well as source files in source packages. SourceRoot items are
    used by compilers to determine path map in deterministic build and by SourceLink provider, which maps local paths to URLs of source files
    stored on the source control server.

Source control information provider that sets these properties and items shall execute before this target (by including
    InitializeSourceControlInformation in its BeforeTargets) and set source control properties and items that haven't been initialized yet.
  -->
  <Target Name="InitializeSourceControlInformation" />

<!--
    ============================================================
                                        _CheckForInvalidConfigurationAndPlatform

This target checks for errors in statically defined properties.  By setting BeforeTargets, we try
    to ensure that the target runs before any build related targets.
    If your target requires this check and is running as a BeforeTargets of one of the first targets
    of $(BuildDependsOn), $(RebuildDependsOn), or $(CleanDependsOn) you will need to set your DependsOn
    to this target.
    ============================================================
    -->
  <Target
      Name="_CheckForInvalidConfigurationAndPlatform"
      BeforeTargets="$(BuildDependsOn);Build;$(RebuildDependsOn);Rebuild;$(CleanDependsOn);Clean">

<PropertyGroup>
      <_InvalidConfigurationMessageText>The OutputPath property is not set for project '$(MSBuildProjectFile)'.  Please check to make sure that you have specified a valid combination of Configuration and Platform for this project.  Configuration='$(_OriginalConfiguration)'  Platform='$(_OriginalPlatform)'.</_InvalidConfigurationMessageText>
      <_InvalidConfigurationMessageText Condition="'$(BuildingInsideVisualStudio)' == 'true'">$(_InvalidConfigurationMessageText)  This error may also appear if some other project is trying to follow a project-to-project reference to this project, this project has been unloaded or is not included in the solution, and the referencing project does not build using the same or an equivalent Configuration or Platform.</_InvalidConfigurationMessageText>
      <_InvalidConfigurationMessageText Condition="'$(BuildingInsideVisualStudio)' != 'true'">$(_InvalidConfigurationMessageText)  You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project.</_InvalidConfigurationMessageText>
    </PropertyGroup>

<Error Condition="'$(OutDir)' != '' and !HasTrailingSlash('$(OutDir)')" Text="The OutDir property must end with a trailing slash." />
    <Error Condition="'$(BaseIntermediateOutputPath)' != '' and !HasTrailingSlash('$(BaseIntermediateOutputPath)')" Text="The BaseIntermediateOutputPath must end with a trailing slash." />
    <Error Condition="'$(IntermediateOutputPath)' != '' and !HasTrailingSlash('$(IntermediateOutputPath)')" Text="The IntermediateOutputPath must end with a trailing slash." />

<PropertyGroup Condition="'$(Prefer32Bit)' == 'true' and ('$(PlatformTarget)' == 'AnyCPU' or '$(PlatformTarget)' == '') and '$(PlatformTargetAsMSBuildArchitectureExplicitlySet)' != 'true'">
      <PlatformTargetAsMSBuildArchitecture>x86</PlatformTargetAsMSBuildArchitecture>
    </PropertyGroup>

<Error Condition=" '$(_InitialMSBuildProjectExtensionsPath)' != '' And '$(MSBuildProjectExtensionsPath)' != '$(_InitialMSBuildProjectExtensionsPath)' "
           Code="MSB3540"
           Text="The value of the property &quot;MSBuildProjectExtensionsPath&quot; was modified after it was used by MSBuild which can lead to unexpected build results.  To set this property, you must do so before Microsoft.Common.props is imported, for example by using Directory.Build.props.  For more information, please visit https://go.microsoft.com/fwlink/?linkid=869650"
            />

<!--
      Log a warning if:
        1. $(EnableBaseIntermediateOutputPathMismatchWarning) is 'true'
        2. $(BaseIntermediateOutputPath) was set in the body of a project after its default value was set in Microsoft.Common.props
        3. $(BaseIntermediateOutputPath) is not the same as $(MSBuildProjectExtensionsPath)

Similar to the error above, there are cases when users set $(BaseIntermediateOutputPath) in the body of their project and things build but only by coincidence.
      MSBuild does not know if $(BaseIntermediateOutputPath) changing would cause problems so tools like NuGet must set $(EnableBaseIntermediateOutputPathMismatchWarning)
      to 'true'.
    -->
    <Warning Condition=" '$(EnableBaseIntermediateOutputPathMismatchWarning)' == 'true' And '$(_InitialBaseIntermediateOutputPath)' != '$(BaseIntermediateOutputPath)' And '$(BaseIntermediateOutputPath)' != '$(MSBuildProjectExtensionsPath)' "
             Code="MSB3539"
             Text="The value of the property &quot;BaseIntermediateOutputPath&quot; was modified after it was used by MSBuild which can lead to unexpected build results. Tools such as NuGet will write outputs to the path specified by the &quot;MSBuildProjectExtensionsPath&quot; instead. To set this property, you must do so before Microsoft.Common.props is imported, for example by using Directory.Build.props.  For more information, please visit https://go.microsoft.com/fwlink/?linkid=869650"
             />
  </Target>

<!--
    ============================================================
                                        Build

The main build entry point.
    ============================================================
    -->
  <PropertyGroup>
    <BuildDependsOn>
      BeforeBuild;
      CoreBuild;
      AfterBuild
    </BuildDependsOn>
  </PropertyGroup>

<!--
    ============================================================
                                        BeforeBuild

Redefine this target in your project in order to run tasks just before Build
    ============================================================
    -->
  <Target Name="BeforeBuild"/>

<!--
    ============================================================
                                        AfterBuild

Redefine this target in your project in order to run tasks just after Build
    ============================================================
    -->
  <Target Name="AfterBuild"/>

<!--
    ============================================================
                                        CoreBuild

The core build step calls each of the build targets.
    ============================================================
    -->
  <PropertyGroup>
    <CoreBuildDependsOn>
      BuildOnlySettings;
      PrepareForBuild;
      PreBuildEvent;
      ResolveReferences;
      PrepareResources;
      ResolveKeySource;
      Compile;
      ExportWindowsMDFile;
      UnmanagedUnregistration;
      GenerateSerializationAssemblies;
      CreateSatelliteAssemblies;
      GenerateManifests;
      GetTargetPath;
      PrepareForRun;
      UnmanagedRegistration;
      IncrementalClean;
      PostBuildEvent
    </CoreBuildDependsOn>
  </PropertyGroup>
  <Target
      Name="CoreBuild"
      DependsOnTargets="$(CoreBuildDependsOn)">

</Target>

<!--
    ============================================================
                                        Rebuild

Delete all intermediate and final build outputs, and then build the project from scratch.
    ============================================================
    -->
  <PropertyGroup>

<_ProjectDefaultTargets Condition="'$(MSBuildProjectDefaultTargets)' != ''">$(MSBuildProjectDefaultTargets)</_ProjectDefaultTargets>
    <_ProjectDefaultTargets Condition="'$(MSBuildProjectDefaultTargets)' == ''">Build</_ProjectDefaultTargets>

<RebuildDependsOn>
      BeforeRebuild;
      Clean;
      $(_ProjectDefaultTargets);
      AfterRebuild;
    </RebuildDependsOn>

<RebuildDependsOn Condition=" '$(MSBuildProjectDefaultTargets)' == 'Rebuild' " >
      BeforeRebuild;
      Clean;
      Build;
      AfterRebuild;
    </RebuildDependsOn>
  </PropertyGroup>

<!--
    ============================================================
                                        BeforeRebuild

Redefine this target in your project in order to run tasks just before Rebuild
    ============================================================
    -->
  <Target Name="BeforeRebuild"/>

<!--
    ============================================================
                                        AfterRebuild

Redefine this target in your project in order to run tasks just after Rebuild
    ============================================================
    -->
  <Target Name="AfterRebuild"/>

<!--
    ============================================================
                                        BuildGenerateSources

Redefine this target in your project in order to run tasks for BuildGenerateSources

Set BuildPassReferences to enable P2P builds
    ============================================================
    -->
  <PropertyGroup>
    <BuildGenerateSourcesAction>Build</BuildGenerateSourcesAction>
  </PropertyGroup>

<!--
    ============================================================
                                        BuildCompile

Redefine this target in your project in order to run tasks for BuildCompile
    ============================================================
    -->
  <PropertyGroup>
    <BuildCompileAction>Build</BuildCompileAction>
  </PropertyGroup>

<!--
    ============================================================
                                        BuildLink

Redefine this target in your project in order to run tasks for BuildLink
    ============================================================
    -->
  <PropertyGroup>
    <BuildLinkAction>Build</BuildLinkAction>
  </PropertyGroup>

<!--
    ============================================================
                                        CopyRunEnvironmentFiles

Copy environment files necessary to run the user's app to the final directory.
    This is a public target that can be invoked by an IDE.

This may be used by an IDE to make the app.config file available for running
    the target app.
    ============================================================
    -->
  <Target
      Name="CopyRunEnvironmentFiles"
      DependsOnTargets="PrepareForBuild;SetWin32ManifestProperties;_CopyAppConfigFile;_CleanRecordFileWrites"/>

<!--
    ============================================================
                                        Run

Run the final build output if it is a .EXE
    ============================================================
    -->
  <PropertyGroup>
    <RunDependsOn></RunDependsOn>
  </PropertyGroup>
  <Target
      Name="Run"
      DependsOnTargets="$(RunDependsOn)">

</Target>

<!--
    ============================================================
                                        BuildOnlySettings

This target is called only when doing a real build.  It is specifically not called during project load.
    ============================================================
    -->
  <PropertyGroup>
    <BuildingProject>false</BuildingProject>
  </PropertyGroup>
  <Target
      Name="BuildOnlySettings">
    <PropertyGroup>
      <BuildingProject>true</BuildingProject>
    </PropertyGroup>
  </Target>

<!--
    ============================================================
                                        PrepareForBuild

Prepare the prerequisites for building.
    ============================================================
    -->
  <PropertyGroup>
    <PrepareForBuildDependsOn>$(PrepareForBuildDependsOn);GetFrameworkPaths;GetReferenceAssemblyPaths;AssignLinkMetadata</PrepareForBuildDependsOn>
  </PropertyGroup>
  <Target
      Name="PrepareForBuild"
      DependsOnTargets="$(PrepareForBuildDependsOn)">

<ItemGroup>
      <AppConfigWithTargetPath Include="$(AppConfig)" Condition="'$(AppConfig)'!=''">
        <TargetPath>$(TargetFileName).config</TargetPath>
      </AppConfigWithTargetPath>
    </ItemGroup>

<MakeDir Directories="$(OutDir);$(IntermediateOutputPath);@(DocFileItem->'%(RelativeDir)');@(CreateDirectory)" ContinueOnError="True"/>

</Target>

<!--
    ============================================================
                                        GetFrameworkPaths

Get the paths for the .NET Framework installation directory

These paths are not used directly by this .targets file but are available for pre and
    post build steps.
    ============================================================
    -->
  <PropertyGroup>
    <Framework40Dir>@(_TargetFramework40DirectoryItem)</Framework40Dir>
    <Framework35Dir>@(_TargetFramework35DirectoryItem)</Framework35Dir>
    <Framework30Dir>@(_TargetFramework30DirectoryItem)</Framework30Dir>
    <Framework20Dir>@(_TargetFramework20DirectoryItem)</Framework20Dir>
    
    <FrameworkDir Condition="'$(FrameworkDir)' == '' and ('$(TargetFrameworkVersion)' == 'v2.0' or '$(TargetFrameworkVersion)' == 'v3.5' or '$(TargetFrameworkVersion)' == 'v4.0')">@(_TargetFramework20DirectoryItem)</FrameworkDir>
    <FrameworkDir Condition="'$(FrameworkDir)' == ''">@(_TargetFramework40DirectoryItem)</FrameworkDir>
    <TargetedFrameworkDir Condition="'$(TargetedFrameworkDir)' == ''">@(_TargetedFrameworkDirectoryItem)</TargetedFrameworkDir>
    <FrameworkSDKDir Condition="'$(FrameworkSDKDir)' == ''">@(_TargetFrameworkSDKDirectoryItem)</FrameworkSDKDir>
    <GetFrameworkPathsDependsOn></GetFrameworkPathsDependsOn>
  </PropertyGroup>

<Target Name="GetFrameworkPaths"/>

<!--
    ============================================================
                                        GetReferenceAssemblyPaths

Get the paths for the Reference Assemblies for the known versions of the
    .NET Framework.

These paths are used by the build process in order to resolve the correct
    assemblies from the various directories, and to support multi-targeting
    ============================================================
    -->
  <Target
      Name="GetReferenceAssemblyPaths"
      DependsOnTargets="$(GetReferenceAssemblyPathsDependsOn);GetFrameworkPaths">

<PropertyGroup>
      <TargetFrameworkDirectory Condition="'@(_CombinedTargetFrameworkDirectoriesItem)' == '$(TargetFrameworkDirectory)'"/>
    </PropertyGroup>

<GetReferenceAssemblyPaths
        Condition="'$(TargetFrameworkMoniker)' != '' and ('$(_TargetFrameworkDirectories)' == '' or '$(_FullFrameworkReferenceAssemblyPaths)' == '')"
        TargetFrameworkMoniker="$(TargetFrameworkMoniker)"
        RootPath="$(TargetFrameworkRootPath)"
        TargetFrameworkFallbackSearchPaths="$(TargetFrameworkFallbackSearchPaths)"
        BypassFrameworkInstallChecks="$(BypassFrameworkInstallChecks)"
        >
      <Output TaskParameter="ReferenceAssemblyPaths" PropertyName="_TargetFrameworkDirectories"/>
      <Output TaskParameter="FullFrameworkReferenceAssemblyPaths" PropertyName="_FullFrameworkReferenceAssemblyPaths"/>
      <Output TaskParameter="TargetFrameworkMonikerDisplayName" PropertyName="TargetFrameworkMonikerDisplayName" Condition="'$(TargetFrameworkMonikerDisplayName)' == ''"/>
    </GetReferenceAssemblyPaths>

<PropertyGroup>
      <TargetFrameworkDirectory>$(_TargetFrameworkDirectories);$(TargetFrameworkDirectory);$(WinFXAssemblyDirectory)</TargetFrameworkDirectory>
      <TargetFrameworkDirectory Condition="'$(TargetPlatformWinMDLocation)' != '' and Exists('$(TargetPlatformWinMDLocation)')">$(TargetFrameworkDirectory);$(TargetPlatformWinMDLocation)</TargetFrameworkDirectory>
    </PropertyGroup>

<PropertyGroup Condition="'$(_TargetFrameworkDirectories)' == '' and '$(AssemblySearchPaths)' != '' and '$(RemoveAssemblyFoldersIfNoTargetFramework)' == 'true'">
      <AssemblySearchPaths>$(AssemblySearchPaths.Replace('{AssemblyFolders}', '').Split(';'))</AssemblySearchPaths>
    </PropertyGroup>

<PropertyGroup Condition="'@(DesignTimeFacadeDirectories)' != ''">
      <TargetFrameworkDirectory>$(TargetFrameworkDirectory);@(DesignTimeFacadeDirectories)</TargetFrameworkDirectory>
    </PropertyGroup>

<Target Name="GetTargetFrameworkMoniker"
          Returns="$(TargetFrameworkMoniker)"/>

<Target Name="GetTargetFrameworkMonikerDisplayName"
          DependsOnTargets="GetFrameworkPaths;GetReferenceAssemblyPaths"
          Returns="$(TargetFrameworkMonikerDisplayName)"/>

<Target Name="GetTargetFrameworkDirectories"
          DependsOnTargets="GetFrameworkPaths;GetReferenceAssemblyPaths"
          Returns="$(TargetFrameworkDirectory)"/>

<!--
    ============================================================
                                        AssignLinkMetadata

For items of a certain set of whitelisted types, make sure that
       if they are defined in a file other than the project file, that
       they have "Link" metadata set to an appropriate default.
    ============================================================
    -->
  <Target Name="AssignLinkMetadata" Condition=" '$(SynthesizeLinkMetadata)' == 'true' ">
    
    <AssignLinkMetadata Items="@(None)"
                        Condition="'@(None)' != '' and '%(None.DefiningProjectFullPath)' != '$(MSBuildProjectFullPath)'">
      <Output TaskParameter="OutputItems" ItemName="_Temp" />
    </AssignLinkMetadata>

<AssignLinkMetadata Items="@(Content)"
                        Condition="'@(Content)' != '' and '%(Content.DefiningProjectFullPath)' != '$(MSBuildProjectFullPath)'">
      <Output TaskParameter="OutputItems" ItemName="_Temp" />
    </AssignLinkMetadata>

<AssignLinkMetadata Items="@(Page)"
                        Condition="'@(Page)' != '' and '%(Page.DefiningProjectFullPath)' != '$(MSBuildProjectFullPath)'">
      <Output TaskParameter="OutputItems" ItemName="_Temp" />
    </AssignLinkMetadata>

<AssignLinkMetadata Items="@(ApplicationDefinition)"
                        Condition="'@(ApplicationDefinition)' != '' and '%(ApplicationDefinition.DefiningProjectFullPath)' != '$(MSBuildProjectFullPath)'">
      <Output TaskParameter="OutputItems" ItemName="_Temp" />
    </AssignLinkMetadata>

<AssignLinkMetadata Items="@(EmbeddedResource)"
                        Condition="'@(EmbeddedResource)' != '' and '%(EmbeddedResource.DefiningProjectFullPath)' != '$(MSBuildProjectFullPath)'">
      <Output TaskParameter="OutputItems" ItemName="_Temp" />
    </AssignLinkMetadata>

<!--
    ============================================================
                                        PreBuildEvent

Run the pre-build event if there is one.
    ============================================================
    -->
  <PropertyGroup>
    <PreBuildEventDependsOn></PreBuildEventDependsOn>
  </PropertyGroup>
  <Target
      Name="PreBuildEvent"
      Condition="'$(PreBuildEvent)'!=''"
      DependsOnTargets="$(PreBuildEventDependsOn)">

</Target>

<!--
    ============================================================
                                        UnmanagedUnregistration

If the main assembly had previously been registered for COM interop, unregister it now.
    We will re-register the new version after it has been built.
    ============================================================
    -->
  <PropertyGroup>
    <UnmanagedUnregistrationDependsOn></UnmanagedUnregistrationDependsOn>
  </PropertyGroup>
  <Target
      Name="UnmanagedUnregistration"
      Condition="(('$(_AssemblyTimestampBeforeCompile)' != '$(_AssemblyTimestampAfterCompile)' or '$(RegisterForComInterop)' != 'true' or '$(OutputType)' != 'library') or
                    ('$(_AssemblyTimestampBeforeCompile)' == '')) and
                   Exists('@(_UnmanagedRegistrationCache)')"
      DependsOnTargets="$(UnmanagedUnregistrationDependsOn)">

<PropertyGroup>
      <UnregisterAssemblyMSBuildArchitecture Condition="'$(UnregisterAssemblyMSBuildArchitecture)' == ''">$(PlatformTargetAsMSBuildArchitecture)</UnregisterAssemblyMSBuildArchitecture>
    </PropertyGroup>

<PropertyGroup Condition="'$(TargetFrameworkAsMSBuildRuntime)' != '' and '$(UnregisterAssemblyMSBuildArchitecture)' != ''">
      
      <UnregisterAssemblyMSBuildRuntime
          Condition="'$(UnregisterAssemblyMSBuildRuntime)' == '' and
                     $([MSBuild]::DoesTaskHostExist(`$(TargetFrameworkAsMSBuildRuntime)`, `$(UnregisterAssemblyMSBuildArchitecture)`))">$(TargetFrameworkAsMSBuildRuntime)</UnregisterAssemblyMSBuildRuntime>

<UnregisterAssemblyMSBuildRuntime Condition="'$(UnregisterAssemblyMSBuildRuntime)' == ''">CurrentRuntime</UnregisterAssemblyMSBuildRuntime>
    </PropertyGroup>

</Target>

<!--
    ============================================================
                     GetTargetFrameworkVersion

This stand-alone target returns the target framework version (i.e. v3.5, v4.0, etc.)
    that would be used if we built this project.

============================================================
    -->

<PropertyGroup>
    <ResolveReferencesDependsOn>
      BeforeResolveReferences;
      AssignProjectConfiguration;
      ResolveProjectReferences;
      FindInvalidProjectReferences;
      ResolveNativeReferences;
      ResolveAssemblyReferences;
      GenerateBindingRedirects;
      ResolveComReferences;
      AfterResolveReferences
    </ResolveReferencesDependsOn>
  </PropertyGroup>

<!--
    ============================================================
                                        BeforeResolveReferences

Redefine this target in your project in order to run tasks just before ResolveReferences
    ============================================================
    -->
  <Target Name="BeforeResolveReferences"/>

<!--
    ============================================================
                                        AfterResolveReferences

Redefine this target in your project in order to run tasks just after ResolveReferences
    ============================================================
    -->
  <Target Name="AfterResolveReferences"/>

<!--
    ============================================================
                                        AssignProjectConfiguration

Assigns the appropriate configuration to each project in the list of project references passed in.
    Adds to the project references passed in any project references implied by dependencies expressed in the solution file, if any.

[IN]
        @(ProjectReference) - the list of all project references

[OUT]
        @(ProjectReferenceWithConfiguration) - the list of project references (MSBuild and potentially VSIP projects)
                                               with metadata values FullConfiguration, Configuration, Platform,
                                               SetConfiguration, and SetPlatform
    ============================================================
    -->
  <Target
      Name="AssignProjectConfiguration"
      Condition="'$(CurrentSolutionConfigurationContents)' != '' or '@(ProjectReference)'!=''">

<PropertyGroup>
      <OnlyReferenceAndBuildProjectsEnabledInSolutionConfiguration Condition="'$(OnlyReferenceAndBuildProjectsEnabledInSolutionConfiguration)' == ''">true</OnlyReferenceAndBuildProjectsEnabledInSolutionConfiguration>
      <ShouldUnsetParentConfigurationAndPlatform Condition="'$(ShouldUnsetParentConfigurationAndPlatform)' == '' and ('$(BuildingInsideVisualStudio)' == 'true' or '$(BuildingSolutionFile)' == 'true')">true</ShouldUnsetParentConfigurationAndPlatform>
      <ShouldUnsetParentConfigurationAndPlatform Condition="'$(ShouldUnsetParentConfigurationAndPlatform)' == ''">false</ShouldUnsetParentConfigurationAndPlatform>

<AddSyntheticProjectReferencesForSolutionDependencies Condition="'$(AddSyntheticProjectReferencesForSolutionDependencies)' == '' and '$(TargetFrameworkIdentifier)' == 'Silverlight'">false</AddSyntheticProjectReferencesForSolutionDependencies>

<AddSyntheticProjectReferencesForSolutionDependencies Condition="'$(AddSyntheticProjectReferencesForSolutionDependencies)' == '' and '$(BuildingInsideVisualStudio)' != 'true'">true</AddSyntheticProjectReferencesForSolutionDependencies>
    </PropertyGroup>

<AssignProjectConfiguration
        ProjectReferences="@(ProjectReference)"
        CurrentProject="$(MSBuildProjectFullPath)"
        CurrentProjectConfiguration="$(Configuration)"
        CurrentProjectPlatform="$(Platform)"
        DefaultToVcxPlatformMapping="$(DefaultToVcxPlatformMapping)"
        VcxToDefaultPlatformMapping="$(VcxToDefaultPlatformMapping)"
        OutputType="$(OutputType)"
        ResolveConfigurationPlatformUsingMappings="false"
        SolutionConfigurationContents="$(CurrentSolutionConfigurationContents)"
        AddSyntheticProjectReferencesForSolutionDependencies="$(AddSyntheticProjectReferencesForSolutionDependencies)"
        OnlyReferenceAndBuildProjectsEnabledInSolutionConfiguration = "$(OnlyReferenceAndBuildProjectsEnabledInSolutionConfiguration)"
        ShouldUnsetParentConfigurationAndPlatform = "$(ShouldUnsetParentConfigurationAndPlatform)" >

<Output TaskParameter="AssignedProjects" ItemName="_ProjectReferenceWithConfiguration"/>
      <Output TaskParameter="UnassignedProjects" ItemName="_ProjectReferenceWithConfiguration"/>

<!--
    ============================================================
                                        _SplitProjectReferencesByFileExistence

Split referenced projects into two lists: those that exist on
    disk and those that don't.
    ============================================================
    -->

<ResolveNonMSBuildProjectOutput
        ProjectReferences="@(ProjectReferenceWithConfiguration)"
        PreresolvedProjectOutputs="$(VSIDEResolvedNonMSBuildProjectOutputs)"
        Condition="'$(BuildingInsideVisualStudio)'=='true' and '@(ProjectReferenceWithConfiguration)'!=''">

</ResolveNonMSBuildProjectOutput>

<ItemGroup>
      <_MSBuildProjectReference Include="@(ProjectReferenceWithConfiguration)" Condition="'$(BuildingInsideVisualStudio)'!='true' and '@(ProjectReferenceWithConfiguration)'!=''"/>
    </ItemGroup>

<ItemGroup>
      <_MSBuildProjectReferenceExistent Include="@(_MSBuildProjectReference)" Condition="Exists('%(Identity)')"/>
      <_MSBuildProjectReferenceNonexistent Include="@(_MSBuildProjectReference)" Condition="!Exists('%(Identity)')"/>
    </ItemGroup>

</Target>

<!--
    ====================================================================================
                                        _GetProjectReferenceTargetFrameworkProperties

Builds the GetTargetFrameworks target of all existent project references to get a list
    of all supported TargetFrameworks of the referenced projects. Calls the
    GetReferenceNearestTargetFrameworkTask to determine the closest match for each project.
    This allows a cross-targeting project to select how it should be configured to build
    against the most appropriate target for the referring target framework.

======================================================================================
  -->
  <Target Name="_GetProjectReferenceTargetFrameworkProperties">
    
    <PropertyGroup Condition="'$(ReferringTargetFrameworkForProjectReferences)' == ''">
      <ReferringTargetFrameworkForProjectReferences Condition="'$(NuGetTargetMoniker)' != '' and !$(NuGetTargetMoniker.Contains(';'))">$(NuGetTargetMoniker)</ReferringTargetFrameworkForProjectReferences>
      <ReferringTargetFrameworkForProjectReferences Condition="'$(NuGetTargetMoniker)' == ''">$(TargetFrameworkMoniker)</ReferringTargetFrameworkForProjectReferences>
    </PropertyGroup>

<!--
      Honor SkipGetTargetFrameworkProperties=true metadata on project references
      to mean that the project reference is known not to target multiple frameworks
      and the mechanism here for selecting the best one can be skipped as an optimization.

We give this treatment to .vcxproj by default since no .vcxproj can target more
      than one framework.

Likewise if the dependency is for build ordering instead of an assembly reference
      (ReferenceOutputAssembly=false), skip the checks since we can't know what TF
      the output would need to be compatible with.
   -->
   <ItemGroup>
      <_MSBuildProjectReferenceExistent Condition="'%(_MSBuildProjectReferenceExistent.SkipGetTargetFrameworkProperties)' == '' and ('%(Extension)' == '.vcxproj' or '%(Extension)' == '.nativeproj')">
        <SkipGetTargetFrameworkProperties>true</SkipGetTargetFrameworkProperties>
      </_MSBuildProjectReferenceExistent>
   </ItemGroup>

<!--
       Allow project references to specify which target framework properties to set and their values
       without consulting the referenced project. This has two use cases:

1. A caller may wish to pick a compatible but sub-optimal target framework. For example,
          to unit test the .NETStandard implementation using a .NETFramework caller even though
          there is also a .NETFramework implementation.

2. As an escape hatch for cases where the compatibility check performed by
          GetTargetFrameworkProperties is faulty.
    -->
    <ItemGroup>
      <_MSBuildProjectReferenceExistent Condition="'%(_MSBuildProjectReferenceExistent.SetTargetFramework)' != ''">
        <SkipGetTargetFrameworkProperties>true</SkipGetTargetFrameworkProperties>
      </_MSBuildProjectReferenceExistent>
    </ItemGroup>

<MSBuild
        Projects="@(_MSBuildProjectReferenceExistent)"
        Targets="GetTargetFrameworks"
        BuildInParallel="$(BuildInParallel)"
        Properties="%(_MSBuildProjectReferenceExistent.SetConfiguration); %(_MSBuildProjectReferenceExistent.SetPlatform)"
        ContinueOnError="!$(BuildingProject)"
        RemoveProperties="%(_MSBuildProjectReferenceExistent.GlobalPropertiesToRemove);TargetFramework;RuntimeIdentifier"
        Condition="'%(_MSBuildProjectReferenceExistent.SkipGetTargetFrameworkProperties)' != 'true'"
        SkipNonexistentTargets="true">
      <Output TaskParameter="TargetOutputs" ItemName="_ProjectReferenceTargetFrameworkPossibilities" />
    </MSBuild>

<ItemGroup>
      
      <_ProjectReferenceTargetFrameworkPossibilitiesOriginalItemSpec Include="@(_ProjectReferenceTargetFrameworkPossibilities->'%(OriginalItemSpec)')"/>
      <_ProjectReferenceTargetFrameworkPossibilities Remove="@(_ProjectReferenceTargetFrameworkPossibilities)"  />
      <_ProjectReferenceTargetFrameworkPossibilities Include="@(_ProjectReferenceTargetFrameworkPossibilitiesOriginalItemSpec)"/>
    </ItemGroup>

<GetReferenceNearestTargetFrameworkTask AnnotatedProjectReferences="@(_ProjectReferenceTargetFrameworkPossibilities)"
                                            CurrentProjectTargetFramework="$(ReferringTargetFrameworkForProjectReferences)"
                                            CurrentProjectName="$(MSBuildProjectName)"
                                            FallbackTargetFrameworks="$(AssetTargetFallback)"
                                            Condition="'@(_ProjectReferenceTargetFrameworkPossibilities->Count())' != '0' and '$(ReferringTargetFrameworkForProjectReferences)' != ''">
      <Output ItemName="AnnotatedProjects" TaskParameter="AssignedProjects" />
    </GetReferenceNearestTargetFrameworkTask>

<ItemGroup>
      
      <AnnotatedProjects Include="@(_ProjectReferenceTargetFrameworkPossibilities)"
                         Condition="'$(ReferringTargetFrameworkForProjectReferences)' == ''" />
      
      <AnnotatedProjects Condition="'@(AnnotatedProjects)' == '%(Identity)' and '%(AnnotatedProjects.NearestTargetFramework)' != '' and '%(AnnotatedProjects.HasSingleTargetFramework)' != 'true'">
        <SetTargetFramework>TargetFramework=%(AnnotatedProjects.NearestTargetFramework)</SetTargetFramework>
      </AnnotatedProjects>

<AnnotatedProjects Condition="'@(AnnotatedProjects)' == '%(Identity)' and ('%(AnnotatedProjects.NearestTargetFramework)' == '' or '%(AnnotatedProjects.HasSingleTargetFramework)' == 'true')">
        <UndefineProperties>%(AnnotatedProjects.UndefineProperties);TargetFramework</UndefineProperties>
      </AnnotatedProjects>

<AnnotatedProjects Condition="'@(AnnotatedProjects)' == '%(Identity)' and '%(AnnotatedProjects.IsRidAgnostic)' == 'true'">
        <UndefineProperties>%(AnnotatedProjects.UndefineProperties);RuntimeIdentifier</UndefineProperties>
      </AnnotatedProjects>

<_MSBuildProjectReferenceExistent Remove="@(_MSBuildProjectReferenceExistent)" Condition="'%(_MSBuildProjectReferenceExistent.SkipGetTargetFrameworkProperties)' != 'true'" />
      <_MSBuildProjectReferenceExistent Include="@(AnnotatedProjects)" />
    </ItemGroup>
  </Target>

<Target Name="GetTargetFrameworks"
          Returns="@(_ThisProjectBuildMetadata)">
    <ItemGroup>
      <_ThisProjectBuildMetadata Include="$(MSBuildProjectFullPath)">
        <TargetFrameworks Condition="'$(TargetFrameworks)' != ''">$(TargetFrameworks)</TargetFrameworks>
        <TargetFrameworks Condition="'$(TargetFrameworks)' == ''">$(TargetFramework)</TargetFrameworks>
        <HasSingleTargetFramework>true</HasSingleTargetFramework>
        <HasSingleTargetFramework Condition="'$(IsCrossTargetingBuild)' == 'true'">false</HasSingleTargetFramework>
        
      <IsRidAgnostic>false</IsRidAgnostic>
      <IsRidAgnostic Condition=" '$(RuntimeIdentifier)' == '' and '$(RuntimeIdentifiers)' == '' ">true</IsRidAgnostic>
      </_ThisProjectBuildMetadata>
    </ItemGroup>
  </Target>

<!--
    ============================================================
                                    GetTargetFrameworkProperties

Overrridden by cross-targeting projects to return the set of
    properties (in the form "key1=value1;...keyN=valueN") needed
    to build it with the best target for the referring project's
    target framework.

The referring project's $(TargetFrameworkMoniker) is passed
    in as $(ReferringTargetFramework)
  -->
  <Target Name="GetTargetFrameworkProperties" />

<!--
    ============================================================
                                        PrepareProjectReferences

Prepares project references for consumption by other targets.

[IN]
        @(ProjectReference) - The list of project references.

[OUT]
        @(ProjectReferenceWithConfiguration)   - Project references with apporpriate metadata
        @(_MSBuildProjectReferenceExistent)    - Subset of @(ProjectReferenceWithConfiguration) that exist
                                                 with added SetTargetFramework metadata for cross-targeting
        @(_MSBuildProjectReferenceNonExistent) - Subset of  @(ProjectReferenceWithConfiguration) that do not exist
    ============================================================
  -->
  <PropertyGroup>
    <PrepareProjectReferencesDependsOn>
      AssignProjectConfiguration;
      _SplitProjectReferencesByFileExistence;
      _GetProjectReferenceTargetFrameworkProperties
    </PrepareProjectReferencesDependsOn>
  </PropertyGroup>
  <Target Name="PrepareProjectReferences" DependsOnTargets="$(PrepareProjectReferencesDependsOn)" />

<!--
    ============================================================
                                        ResolveProjectReferences

Build referenced projects:

[IN]
        @(ProjectReferenceWithConfiguration) - The list of project references.

[OUT]
        @(_ResolvedNativeProjectReferencePaths) - Paths to referenced native projects.
        @(_ResolvedProjectReferencePaths) - Paths to referenced managed projects.
    ============================================================
    -->
  
  <ItemDefinitionGroup>
    <ProjectReference>
      
      <Targets>$(ProjectReferenceBuildTargets)</Targets>
      
      <OutputItemType/>
      <ReferenceSourceTarget>ProjectReference</ReferenceSourceTarget>
    </ProjectReference>
  </ItemDefinitionGroup>

<!--
        When building this project from the IDE, just gather the referenced build outputs.
        The IDE will already have built the project, so there's no need to do it again here.

The ContinueOnError setting is here so that, during project load, as
        much information as possible will be passed to the compilers.
        -->

</MSBuild>

<MSBuild
        Projects="@(_MSBuildProjectReferenceExistent)"
        Targets="%(_MSBuildProjectReferenceExistent.Targets)"
        BuildInParallel="$(BuildInParallel)"
        Properties="%(_MSBuildProjectReferenceExistent.SetConfiguration); %(_MSBuildProjectReferenceExistent.SetPlatform);  %(_MSBuildProjectReferenceExistent.SetTargetFramework)"
        Condition="'%(_MSBuildProjectReferenceExistent.BuildReference)' == 'true' and '@(ProjectReferenceWithConfiguration)' != '' and '$(BuildingInsideVisualStudio)' != 'true' and '$(BuildProjectReferences)' == 'true' and '@(_MSBuildProjectReferenceExistent)' != ''"
        ContinueOnError="$(ContinueOnError)"
        RemoveProperties="%(_MSBuildProjectReferenceExistent.GlobalPropertiesToRemove)">

</MSBuild>

<MSBuild
        Projects="@(_MSBuildProjectReferenceExistent)"
        Targets="GetNativeManifest"
        BuildInParallel="$(BuildInParallel)"
        Properties="%(_MSBuildProjectReferenceExistent.SetConfiguration); %(_MSBuildProjectReferenceExistent.SetPlatform); %(_MSBuildProjectReferenceExistent.SetTargetFramework)"
        Condition="'%(_MSBuildProjectReferenceExistent.BuildReference)' == 'true' and '@(ProjectReferenceWithConfiguration)' != '' and '$(BuildingProject)' == 'true' and '@(_MSBuildProjectReferenceExistent)' != ''"
        ContinueOnError="$(ContinueOnError)"
        SkipNonexistentTargets="true"
        RemoveProperties="%(_MSBuildProjectReferenceExistent.GlobalPropertiesToRemove)">

<ItemGroup>
      <_ResolvedProjectReferencePaths Remove="@(_ResolvedProjectReferencePaths)" Condition="'%(_ResolvedProjectReferencePaths.ResolveableAssembly)' == 'false'" />
      
      <_ResolvedProjectReferencePaths>
        <OriginalProjectReferenceItemSpec>%(_ResolvedProjectReferencePaths.OriginalItemSpec)</OriginalProjectReferenceItemSpec>
      </_ResolvedProjectReferencePaths>
    </ItemGroup>

<Warning
        Text="The referenced project '%(_MSBuildProjectReferenceNonexistent.Identity)' does not exist."
        Condition="'@(ProjectReferenceWithConfiguration)' != '' and '@(_MSBuildProjectReferenceNonexistent)' != ''"/>

</Target>

<Target
    Name="ResolveProjectReferencesDesignTime"
    Returns="@(_ProjectReferencesFromRAR);@(_ResolvedNativeProjectReferencePaths)"
    DependsOnTargets="ResolveProjectReferences;ResolveAssemblyReferences">
    
    <ItemGroup>
      <_ProjectReferencesFromRAR Include="@(ReferencePath->WithMetadataValue('ReferenceSourceTarget', 'ProjectReference'))">
        <OriginalItemSpec>%(ReferencePath.ProjectReferenceOriginalItemSpec)</OriginalItemSpec>
      </_ProjectReferencesFromRAR>
    </ItemGroup>
  </Target>

<!--
    ============================================================
                                        GetTargetPath

This target returns an item containing the build product (i.e. EXE, DLL)
    that would be produced if we built this project, with some relevant
    metadata.
    ============================================================
    -->
  <PropertyGroup>
    <GetTargetPathDependsOn>$(GetTargetPathDependsOn)</GetTargetPathDependsOn>
  </PropertyGroup>

<!--
    ============================================================
                                        GetTargetPathWithTargetPlatformMoniker

This stand-alone target returns the name and version of the target platform for this project.

NOTE: The ProjectReference protocol uses only GetTargetPath. Computing the item
    in this target allows projects to override GetTargetPath without having to reimplement
    the details of the metadata computation.
    ============================================================
    -->
  <PropertyGroup>
    <GetTargetPathWithTargetPlatformMonikerDependsOn>$(GetTargetPathDependsOn)</GetTargetPathWithTargetPlatformMonikerDependsOn>
  </PropertyGroup>

<Target
      Name="GetTargetPathWithTargetPlatformMoniker"
      BeforeTargets="GetTargetPath"
      DependsOnTargets="$(GetTargetPathWithTargetPlatformMonikerDependsOn)"
      Returns="@(TargetPathWithTargetPlatformMoniker)">
    <ItemGroup>
      <TargetPathWithTargetPlatformMoniker Include="$(TargetPath)">
        <TargetPlatformMoniker>$(TargetPlatformMoniker)</TargetPlatformMoniker>
        <TargetPlatformIdentifier>$(TargetPlatformIdentifier)</TargetPlatformIdentifier>
        <TargetFrameworkIdentifier>$(TargetFrameworkIdentifier)</TargetFrameworkIdentifier>
        <TargetFrameworkVersion>$(TargetFrameworkVersion.TrimStart('vV'))</TargetFrameworkVersion>
        <ReferenceAssembly Condition="'$(ProduceReferenceAssembly)' == 'true'">$(TargetRefPath)</ReferenceAssembly>
        <CopyUpToDateMarker>@(CopyUpToDateMarker)</CopyUpToDateMarker>
      </TargetPathWithTargetPlatformMoniker>
    </ItemGroup>
  </Target>

<!--
    ============================================================
                                        GetNativeManifest

Compute the manifest item for this project.

[IN]
        $(_DeploymentApplicationManifestIdentity) - the manifest identity
        @(ApplicationManifest)         - the original application manifest item

[OUT]
        @(ComputedApplicationManifest) - application manifest item with full hint path, if generated
    ============================================================
    -->
  <Target
      Name="GetNativeManifest"
      Returns="@(ComputedApplicationManifest)">

<ItemGroup>
      <ComputedApplicationManifest Include="$(_DeploymentApplicationManifestIdentity)" Condition="'$(OutputType)'!='winexe' and '$(OutputType)'!='exe' and '$(OutputType)'!='appcontainerexe' and Exists('%(_ApplicationManifestFinal.FullPath)')">
        <HintPath>%(_ApplicationManifestFinal.FullPath)</HintPath>
      </ComputedApplicationManifest>
    </ItemGroup>

</Target>

<!--
    ============================================================
                                        ResolveNativeReferences

Resolve native references

[IN]
        @(NativeReference) - The manifest reference (or list of manifest references)

[OUT]
        @(NativeReferenceFile)  - List of manifest files referenced.
        @(_DeploymentNativePrerequisite)   - List of native assembly prerequisites contained in the manifest.
        @(ComClassReference)    - List of COM components contained in the manifest.
        @(COMReferenceFromNative) List of type libraries contained in the manifest.
        @(COMFileReference)     - List of loose files contained in the manifest.
        @(_DeploymentLooseManifestFile)    - List of extra files that should be published.
    ============================================================
    -->
  <Target
      Name="ResolveNativeReferences"
      Condition="'@(NativeReference)'!=''"
      DependsOnTargets="ResolveProjectReferences">

</Target>

<!--
    ============================================================

ResolveAssemblyReferences

Given the list of assemblies, find the closure of all assemblies that they depend on. These are
    what we need to copy to the output directory.

[IN]
        @(Reference) - List of assembly references as fusion names.
        @(_ResolvedProjectReferencePaths) - List of project references produced by projects that this project depends on.

The 'Private' attribute on the reference corresponds to the Copy Local flag in IDE.
            The 'Private' flag can have three possible values:
                - 'True' means the reference should be Copied Local
                - 'False' means the reference should not be Copied Local
                - [Missing] means this task will decide whether to treat this reference as CopyLocal or not.

[OUT]
        @(ReferencePath) - Paths to resolved primary files.
        @(ReferenceDependencyPaths) - Paths to resolved dependency files.
        @(_ReferenceRelatedPaths) - Paths to .xmls and .pdbs.
        @(ReferenceSatellitePaths) - Paths to satellites.
        @(_ReferenceSerializationAssemblyPaths) - Paths to XML serialization assemblies created by sgen.
        @(_ReferenceScatterPaths) - Paths to scatter files.
        @(ReferenceCopyLocalPaths) - Paths to files that should be copied to the local directory.
    ============================================================
    -->
  <PropertyGroup>
    <ResolveAssemblyReferencesDependsOn>
      ResolveProjectReferences;
      FindInvalidProjectReferences;
      GetFrameworkPaths;
      GetReferenceAssemblyPaths;
      PrepareForBuild;
      ResolveSDKReferences;
      ExpandSDKReferences;
    </ResolveAssemblyReferencesDependsOn>
  </PropertyGroup>
  <Target
      Name="ResolveAssemblyReferences"
      Returns="@(ReferencePath)"
      DependsOnTargets="$(ResolveAssemblyReferencesDependsOn)">

<PropertyGroup>
      <ResolveAssemblyReferencesStateFile Condition="'$(DisableRarCache)'!='true' and '$(ResolveAssemblyReferencesStateFile)' == ''">$(IntermediateOutputPath)$(MSBuildProjectFile)AssemblyReference.cache</ResolveAssemblyReferencesStateFile>
    </PropertyGroup>

<ItemGroup>
      <_ResolveAssemblyReferencesApplicationConfigFileForExes Include="@(AppConfigWithTargetPath)" Condition="'$(AutoGenerateBindingRedirects)'=='true' or '$(AutoUnifyAssemblyReferences)'=='false'"/>
    </ItemGroup>

<PropertyGroup>
      
      <_FindDependencies Condition="'$(BuildingProject)' != 'true' and '$(_ResolveReferenceDependencies)' != 'true'">false</_FindDependencies>
      <ResolveAssemblyReferencesSilent Condition="'$(ResolveAssemblyReferencesSilent)' == '' and '$(TraceDesignTime)' != 'true' and '$(BuildingProject)' == 'false'">true</ResolveAssemblyReferencesSilent>
      <ResolveAssemblyReferencesSilent Condition="'$(ResolveAssemblyReferencesSilent)' == ''">false</ResolveAssemblyReferencesSilent>
      <ResolveAssemblyWarnOrErrorOnTargetArchitectureMismatch Condition="'$(ResolveAssemblyWarnOrErrorOnTargetArchitectureMismatch)' == ''">Warning</ResolveAssemblyWarnOrErrorOnTargetArchitectureMismatch>
    </PropertyGroup>

<PropertyGroup Condition="'$(FindDependenciesOfExternallyResolvedReferences)' == ''">
       <FindDependenciesOfExternallyResolvedReferences>false</FindDependenciesOfExternallyResolvedReferences>
       <FindDependenciesOfExternallyResolvedReferences Condition="'$(AutoGenerateBindingRedirects)' == 'true'">true</FindDependenciesOfExternallyResolvedReferences>
    </PropertyGroup>

<!--
    ============================================================

FindReferenceAssembliesForReferences

Given the list of references, create a list of assemblies to pass to the compiler that
    includes reference assemblies rather than implementation assemblies where possible.

[IN]
        @(ReferencePath) - List of assembly references as resolved paths with ReferenceAssembly metadata

[OUT]
        @(ReferencePathWithRefAssemblies) - Paths to resolved reference (or implementation) assemblies.
    ============================================================
    -->
  <Target Name="FindReferenceAssembliesForReferences"
          DependsOnTargets="ResolveReferences">
    <ItemGroup>
      
      <ReferencePath Condition="'%(ReferencePath.ReferenceAssembly)' == ''">
        <ReferenceAssembly>%(FullPath)</ReferenceAssembly>
      </ReferencePath>

<ReferencePathWithRefAssemblies Include="@(ReferencePath->'%(ReferenceAssembly)')"
                                      Condition="'$(CompileUsingReferenceAssemblies)' != 'false'">
        <OriginalPath Condition="'%(ReferencePath.Identity)' != '@(ReferencePath->'%(ReferenceAssembly)')'">%(ReferencePath.Identity)</OriginalPath>
      </ReferencePathWithRefAssemblies>
      <ReferencePathWithRefAssemblies Include="@(ReferencePath)"
                                      Condition="'$(CompileUsingReferenceAssemblies)' == 'false'" />
    </ItemGroup>
  </Target>

<!--
    ====================================================================================================

GenerateBindingRedirects
    Inject the binding redirects into the app config file based on suggested redirects as output from
    ResolveAssemblyReferences.

[IN]
        @(AppConfigWithTargetPath) - Path to the source app config file. This can be null if the project
                                     doesn't contain an app config file.
        $(TargetFileName) -          The file name of the build target.

[OUT]
        @(OutputAppConfigFile) -     Path to the output app config file in the intermediate directory.

====================================================================================================
  -->
  <Target Name="GenerateBindingRedirects"
    Inputs="$(MSBuildAllProjects);@(AppConfigFile);$(ResolveAssemblyReferencesStateFile);$(IntermediateOutputPath);@(SuggestedBindingRedirects)"
    Outputs="$(_GenerateBindingRedirectsIntermediateAppConfig)"
    Condition="'$(AutoGenerateBindingRedirects)' == 'true' and '$(GenerateBindingRedirectsOutputType)' == 'true'">

</GenerateBindingRedirects>

</Target>

<!--
    ====================================================================================================

GenerateBindingRedirectsUpdateAppConfig
    Updates the project to use the generated app.config content.  This needs to run regardless of
    inputs/outputs so it is seperate from GenerateBindingRedirects.
    ====================================================================================================
  -->
  <Target Name="GenerateBindingRedirectsUpdateAppConfig"
    AfterTargets="GenerateBindingRedirects"
    Condition="'$(AutoGenerateBindingRedirects)' == 'true' and '$(GenerateBindingRedirectsOutputType)' == 'true' and Exists('$(_GenerateBindingRedirectsIntermediateAppConfig)')">

<PropertyGroup>
      <AppConfig>$(_GenerateBindingRedirectsIntermediateAppConfig)</AppConfig>
    </PropertyGroup>
    <ItemGroup>
      <AppConfigWithTargetPath Remove="@(AppConfigWithTargetPath)" />
      <AppConfigWithTargetPath Include="$(AppConfig)">
        <TargetPath>$(TargetFileName).config</TargetPath>
      </AppConfigWithTargetPath>
    </ItemGroup>

</Target>

<!--
    ===========================================================================================
                                        GetInstalledSDKs

Gets the list of SDKs installed in the SDKDirectoryRoot and SDKRegistryRoot locations

These paths are used by the ResolveSDKReference task and the ResolveAssemblyReference task.
    ===========================================================================================
  -->
  <PropertyGroup>
    <SDKReferenceRegistryRoot Condition="'$(SDKReferenceRegistryRoot)' == ''">Software\Microsoft\Microsoft SDKs</SDKReferenceRegistryRoot>
    <SDKReferenceDirectoryRoot Condition="'$(SDKReferenceDirectoryRoot)' == ''">$(LocalAppData)\Microsoft SDKs;$(MSBuildProgramFiles32)\Microsoft SDKs</SDKReferenceDirectoryRoot>
    
    <SDKExtensionDirectoryRoot Condition="'$(SDKExtensionDirectoryRoot)' == '' and '$(SDKIdentifier)' != ''">$(MSBuildProgramFiles32)\Microsoft SDKs\Windows Kits\10;$(MSBuildProgramFiles32)\Windows Kits\10</SDKExtensionDirectoryRoot>

<SupportWindows81SDKs Condition="'$(SupportWindows81SDKs)' == '' and '$(Support81SDKs)' != 'false' and '$(TargetPlatformIdentifier)' == 'UAP'">true</SupportWindows81SDKs>
    <TargetPlatformIdentifierWindows81 Condition="'$(TargetPlatformIdentifierWindows81)' == '' and '$(SupportWindows81SDKs)' == 'true'">Windows</TargetPlatformIdentifierWindows81>
    <TargetPlatformVersionWindows81 Condition="'$(TargetPlatformVersionWindows81)' == '' and '$(SupportWindows81SDKs)' == 'true'">8.1</TargetPlatformVersionWindows81>

<SupportWindowsPhone81SDKs Condition="'$(SupportWindowsPhone81SDKs)' == '' and '$(Support81SDKs)' != 'false' and '$(TargetPlatformIdentifier)' == 'UAP'">false</SupportWindowsPhone81SDKs>
    <TargetPlatformIdentifierWindowsPhone81 Condition="'$(TargetPlatformIdentifierWindowsPhone81)' == '' and '$(SupportWindowsPhone81SDKs)' == 'true'">WindowsPhoneApp</TargetPlatformIdentifierWindowsPhone81>
    <TargetPlatformVersionWindowsPhone81 Condition="'$(TargetPlatformVersionWindowsPhone81)' == '' and '$(SupportWindowsPhone81SDKs)' == 'true'">8.1</TargetPlatformVersionWindowsPhone81>
  </PropertyGroup>

<GetInstalledSDKLocations
           SDKDirectoryRoots="$(SDKReferenceDirectoryRoot)"
           SDKExtensionDirectoryRoots=""
           SDKRegistryRoot="$(SDKReferenceRegistryRoot)"
           TargetPlatformVersion="$(TargetPlatformVersionWindows81)"
           TargetPlatformIdentifier="$(TargetPlatformIdentifierWindows81)"
           Condition="'$(SupportWindows81SDKs)' == 'true' and '$(TargetPlatformIdentifierWindows81)' != '' and '$(TargetPlatformVersionWindows81)' != ''"
           WarnWhenNoSDKsFound="false"
           >
      <Output TaskParameter="InstalledSDKs" ItemName="InstalledSDKLocations"/>
    </GetInstalledSDKLocations>

</Target>

<!--
    ============================================================

ResolveSDKReferences

Given a list of SDKReference items and a list of resolved winmd files which may contain metadata as to which sdk they came from
    we need to find the sdk root folders on disk and populate a ResolvedSDKReference item which has the full path to the SDK ROOT
    and the sdk identity as a piece of metadata.

[IN]
        @(SDKReference) - List of sdk references (the identity in the sdk manifest file).
        @(ReferencePath) -List of resolved assemblies, we are interested in the ones which have IsWinMDFile set to true.

[OUT]
        @(ResolvedSDKReference) - Full path to the root of the SDK
    ============================================================
  -->
  <PropertyGroup>
    <ResolveSDKReferencesDependsOn>
      GetInstalledSDKLocations
    </ResolveSDKReferencesDependsOn>
  </PropertyGroup>

<PropertyGroup>
    <TargetedSDKConfiguration Condition="'$(TargetedSDKConfiguration)' == '' and '_$(Configuration)' == '_Debug'">Debug</TargetedSDKConfiguration>
    <TargetedSDKConfiguration Condition="'$(TargetedSDKConfiguration)' == '' and '_$(Configuration)' == '_Release'">Retail</TargetedSDKConfiguration>
    <TargetedSDKConfiguration Condition="'$(TargetedSDKConfiguration)' == ''">Retail</TargetedSDKConfiguration>
    <TargetedSDKArchitecture Condition="'$(TargetedSDKArchitecture)' == ''">$(ProcessorArchitecture)</TargetedSDKArchitecture>
    <TargetedSDKArchitecture Condition="'$(TargetedSDKArchitecture)' == ''">Neutral</TargetedSDKArchitecture>
  </PropertyGroup>

<!--
    ============================================================

FindInvalidProjectReferences

Find project to project references with target platform version higher than the one used by the current project and
    creates a list of invalid references to be unresolved. It issues a warning for each invalid reference.

[IN]
        $(TargetPlatformVersion) - Project's target platform version
        @(_ProjectReferenceTargetPlatformMonikers) - List of monikers of all referenced projects gathered by the helper
                                                     target GetTargetPlatformMonikers.

[OUT]
    @(InvalidProjectReferences) - List of invalid project references

============================================================
    -->

<PropertyGroup>
    <FindInvalidProjectReferencesDependsOn>
      GetReferenceTargetPlatformMonikers
    </FindInvalidProjectReferencesDependsOn>
  </PropertyGroup>

<!--
    ============================================================

ExpandSDKReferences

After we have resolved the sdk refrence we need to make sure that we automatically include the references which are part of the SDK (both winmd and dll)
        as part of the assemblies passed to the compiler.

Project systems or project which do not want to reference all dlls or winmd files should override this target to do nothing.
   ============================================================
    -->
  <PropertyGroup>
    <ExpandSDKReferencesDependsOn>
      ResolveSDKReferences
    </ExpandSDKReferencesDependsOn>

<ExpandSDKAllowedReferenceExtensions Condition="'$(ExpandSDKAllowedReferenceExtensions)' == ''">
      .winmd;
      .dll
    </ExpandSDKAllowedReferenceExtensions>
  </PropertyGroup>

<!--
    ============================================================

ExportWindowsMDFile

When a project is generating a a winmd file through c# or vb, ect the compiler will create a WinMDModule file. This file needs to be run
    through the winmdexp tool in order to generate the resulting WinMD file.

===========================================================
    -->

<PropertyGroup>
        
        <CopyBuildOutputToOutputDirectory>false</CopyBuildOutputToOutputDirectory>
        <CopyOutputSymbolsToOutputDirectory>false</CopyOutputSymbolsToOutputDirectory>
        <CopyDocumentationFileToOutputDirectory>false</CopyDocumentationFileToOutputDirectory>

<WinMdExpToolPath Condition="'$(WinMdExpToolPath)' == ''">$(TargetFrameworkSDKToolsDirectory)</WinMdExpToolPath>
        <WinMdExpUTF8Ouput Condition="'$(WinMdExpUTF8Ouput)' == ''">true</WinMdExpUTF8Ouput>
      </PropertyGroup>

<ItemGroup>
      <_ReferencesFromRAR Include="@(ReferencePath->WithMetadataValue('ReferenceSourceTarget', 'ResolveAssemblyReference'))"/>
    </ItemGroup>
  </Target>

<PropertyGroup>
    <ProjectDesignTimeAssemblyResolutionSearchPaths Condition=" '$(ProjectDesignTimeAssemblyResolutionSearchPaths)' == '' ">
      {CandidateAssemblyFiles};
      $(ReferencePath);
      {HintPathFromItem};
      {TargetFrameworkDirectory};
      {Registry:$(FrameworkRegistryBase),$(TargetFrameworkVersion),$(AssemblyFoldersSuffix)$(AssemblyFoldersExConditions)};
      {RawFileName};
      $(TargetDir)
    </ProjectDesignTimeAssemblyResolutionSearchPaths>
  </PropertyGroup>

<!--
    ==============================================================

DesignTimeResolveAssemblyReferences

Given the list of assemblies, resolve their reference paths.
    This target is called by Visual Studio at run time in order to filter references
    according to the targeted framework.

[IN]
        @(DesignTimeReference) - List of assembly references as simple/fusion names.

[OUT]
        @(ReferencePath) - Paths to resolved primary files.

==============================================================
    -->
  <PropertyGroup>
    <DesignTimeResolveAssemblyReferencesDependsOn>
      GetFrameworkPaths;
      GetReferenceAssemblyPaths;
      ResolveReferences
    </DesignTimeResolveAssemblyReferencesDependsOn>
  </PropertyGroup>

<PropertyGroup>
      <DesignTimeResolveAssemblyReferencesStateFile Condition="'$(DisableRarCache)'!='true'">$(IntermediateOutputPath)$(MSBuildProjectFile)DesignTimeResolveAssemblyReferences.cache</DesignTimeResolveAssemblyReferencesStateFile>
    </PropertyGroup>

<PropertyGroup>
      <DesignTimeAssemblySearchPaths Condition=" '$(DesignTimeAssemblySearchPaths)' == '' ">
        {CandidateAssemblyFiles};
        $(ReferencePath);
        {HintPathFromItem};
        {TargetFrameworkDirectory};
        {Registry:$(FrameworkRegistryBase),$(TargetFrameworkVersion),$(AssemblyFoldersSuffix)$(AssemblyFoldersExConditions)};
        {RawFileName};
        $(OutDir)
      </DesignTimeAssemblySearchPaths>
    </PropertyGroup>

<PropertyGroup>
      <DesignTimeFindDependencies Condition=" '$(DesignTimeFindDependencies)' == '' ">false</DesignTimeFindDependencies>
      <DesignTimeIgnoreVersionForFrameworkReferences Condition=" '$(DesignTimeIgnoreVersionForFrameworkReferences)' == '' ">false</DesignTimeIgnoreVersionForFrameworkReferences>
      <DesignTimeFindSatellites Condition=" '$(DesignTimeFindSatellites)' == '' ">false</DesignTimeFindSatellites>
      <DesignTimeFindSerializationAssemblies Condition=" '$(DesignTimeFindSerializationAssemblies)' == '' ">false</DesignTimeFindSerializationAssemblies>
      <DesignTimeFindRelatedFiles Condition=" '$(DesignTimeFindRelatedFiles)' == '' ">false</DesignTimeFindRelatedFiles>
      <DesignTimeSilentResolution Condition=" '$(DesignTimeSilentResolution)' == '' and '$(TraceDesignTime)' != 'true'">true</DesignTimeSilentResolution>
      <DesignTimeAutoUnify Condition="'$(DesignTimeAutoUnify)' == ''">false</DesignTimeAutoUnify>
    </PropertyGroup>

<!--
    ============================================================
                                        ResolveComReferences

Resolve COM references

[IN]
        @(COMReference) - The list of COM references
        $(BaseIntermediateOutputPath) - The output directory in which to generate wrapper assemblies

[OUT]
        @(ReferencePath) - Paths to referenced wrappers.

If ResolveComReferences is invoked from the IDE, PrepareForBuild may need to run to create directories.
    ============================================================
    -->
  <PropertyGroup>
    <ComReferenceExecuteAsTool Condition="'$(ComReferenceExecuteAsTool)'==''">false</ComReferenceExecuteAsTool>
  </PropertyGroup>

<PropertyGroup Condition=" '$(InteropOutputPath)' == '' ">
      <InteropOutputPath>$(IntermediateOutputPath)</InteropOutputPath>
    </PropertyGroup>

<PropertyGroup>
      <ResolveComReferenceMSBuildArchitecture Condition="'$(ResolveComReferenceMSBuildArchitecture)' == ''">$(PlatformTargetAsMSBuildArchitecture)</ResolveComReferenceMSBuildArchitecture>

<ResolveComReferenceToolPath Condition="'$(ResolveComReferenceToolPath)' == ''">$(TargetFrameworkSDKToolsDirectory)</ResolveComReferenceToolPath>
      <ResolveComReferenceSilent Condition="'$(ResolveComReferenceSilent)' == ''">false</ResolveComReferenceSilent>
    </PropertyGroup>

</ResolveComReference>

</Target>

<!--
    ============================================================
                                      ResolveFrameworkReferences

Overrridden by Microsoft.NET.Sdk to return
    ResolvedFrameworkReference items in order to populate the
    Frameworks node of the Solution Explorer in the IDE.
  -->
  <Target Name="ResolveFrameworkReferences" />

<!--
    ============================================================
                                        PrepareResources

Prepare resources for the Compile step.
    ============================================================
    -->
  <PropertyGroup>
    <PrepareResourcesDependsOn>
      $(PrepareResourcesDependsOn);
      PrepareResourceNames;
      ResGen;
      CompileLicxFiles
    </PrepareResourcesDependsOn>
  </PropertyGroup>
  <Target
      Name="PrepareResources"
      DependsOnTargets="$(PrepareResourcesDependsOn)"/>

<!--
    ============================================================
                                        PrepareResourceNames

Prepare the names of resource files.
    ============================================================
    -->
  <PropertyGroup>
    <PrepareResourceNamesDependsOn>
      AssignTargetPaths;
      SplitResourcesByCulture;
      CreateManifestResourceNames;
      CreateCustomManifestResourceNames
    </PrepareResourceNamesDependsOn>
  </PropertyGroup>
  <Target
      Name="PrepareResourceNames"
      DependsOnTargets="$(PrepareResourceNamesDependsOn)"/>

<!--
    ============================================================
                                        AssignTargetPaths

This target creates <TargetPath> tags for items. <TargetPath> is a relative folder plus filename
    for the destination of this item.
    ============================================================
    -->
  <PropertyGroup>
    <AssignTargetPathsDependsOn></AssignTargetPathsDependsOn>
  </PropertyGroup>
  <Target
      Name="AssignTargetPaths"
      DependsOnTargets="$(AssignTargetPathsDependsOn)">

<AssignTargetPath Files="@(EmbeddedResource)" RootFolder="$(MSBuildProjectDirectory)">
      <Output TaskParameter="AssignedFiles" ItemName="_Temporary" />
    </AssignTargetPath>

</Target>

<!--
    ============================================================
                                        GetItemTargetPaths

This target returns all items that have TargetPath metadata assigned by the AssignTargetPaths target.
    ============================================================
    -->
  <Target
    Name="GetItemTargetPaths"
    DependsOnTargets="AssignTargetPaths"
    Returns="
      @(EmbeddedResource);
      @(ContentWithTargetPath);
      @(_NoneWithTargetPath);
      @(_DeploymentBaseManifestWithTargetPath);
      " />

<!--
    ============================================================
                                        SplitResourcesByCulture

Split EmbeddedResource items into five lists based on whether
    they are resx files, licx files or other resources and whether they should be localized. Also adds Type and Culture
    metadata. Type indicates whether the resource is "Resx" or "Non-Resx".

[IN]/[OUT]
        @(EmbeddedResource) - The raw list of resources.

[OUT]
        @(_LicxFile) - The EmbeddedResource items with extension equal to '.licx'.
    ============================================================
    -->
  <Target
      Name="SplitResourcesByCulture"
      DependsOnTargets="AssignTargetPaths">

<EmbeddedResource Include="@(ResxWithNoCulture);@(ResxWithCulture)">
        <Type>Resx</Type>
      </EmbeddedResource>
      <EmbeddedResource Include="@(NonResxWithCulture);@(NonResxWithNoCulture)">
        <Type>Non-Resx</Type>
      </EmbeddedResource>
    </ItemGroup>

<EmbeddedResource Remove="@(_MixedResourceWithCulture)" />
      <EmbeddedResource Remove="@(_MixedResourceWithNoCulture)" />
      <EmbeddedResource Remove="@(_LicxFile)" />

<EmbeddedResource Include="@(_MixedResourceWithNoCulture);@(_MixedResourceWithCulture)" Condition="'%(Extension)'=='.resx' or '%(Extension)'=='.restext'">
        <Type Condition="'%(_MixedResourceWithNoCulture.Type)'=='' and '%(_MixedResourceWithCulture.Type)'==''">Resx</Type>
      </EmbeddedResource>
      <EmbeddedResource Include="@(_MixedResourceWithNoCulture);@(_MixedResourceWithCulture)" Condition="'%(Extension)'!='.resx' and '%(Extension)'!='.restext'">
        <Type Condition="'%(_MixedResourceWithNoCulture.Type)'=='' and '%(_MixedResourceWithCulture.Type)'==''">Non-Resx</Type>
      </EmbeddedResource>

<ResxWithNoCulture Remove="@(ResxWithNoCulture)"/>
      <NonResxWithNoCulture Remove="@(NonResxWithNoCulture)"/>
      <ResxWithCulture Remove="@(ResxWithCulture)"/>
      <NonResxWithCulture Remove="@(NonResxWithCulture)"/>
      <ResxWithNoCulture Include="@(_MixedResourceWithNoCulture)" Condition="'%(WithCulture)'=='false' and ('%(Extension)'=='.resx' or '%(Extension)'=='.restext')"/>
      <NonResxWithNoCulture Include="@(_MixedResourceWithNoCulture)" Condition="'%(WithCulture)'=='false' and ('%(Extension)'!='.resx' and '%(Extension)'!='.restext')"/>
      <ResxWithCulture Include="@(_MixedResourceWithCulture)" Condition="'%(WithCulture)'=='true' and ('%(Extension)'=='.resx' or '%(Extension)'=='.restext')"/>
      <NonResxWithCulture Include="@(_MixedResourceWithCulture)" Condition="'%(WithCulture)'=='true' and ('%(Extension)'!='.resx' and '%(Extension)'!='.restext')"/>

<_MixedResourceWithNoCulture Remove="@(_MixedResourceWithNoCulture)" />
      <_MixedResourceWithCulture Remove="@(_MixedResourceWithCulture)" />

</ItemGroup>

</Target>

<!--
    =======================================================================
                                        CreateCustomManifestResourceNames

Allows custom manifest resource name generation tasks to plug
    into the build process
    =======================================================================
    -->
  <PropertyGroup>
    <CreateCustomManifestResourceNamesDependsOn></CreateCustomManifestResourceNamesDependsOn>
  </PropertyGroup>
  <Target
      Name="CreateCustomManifestResourceNames"
      DependsOnTargets="$(CreateCustomManifestResourceNamesDependsOn)"/>

<!--
    ============================================================
                                        ResGen

Run GenerateResource on the given resx files.

============================================================
    -->
  <PropertyGroup>
    <ResGenDependsOn>ResolveAssemblyReferences;SplitResourcesByCulture;BeforeResGen;CoreResGen;AfterResGen</ResGenDependsOn>
    <CoreResGenDependsOn>FindReferenceAssembliesForReferences</CoreResGenDependsOn>
    <UseSourcePath Condition="'$(UseSourcePath)'==''">true</UseSourcePath>
    <ResGenExecuteAsTool Condition="'$(ResGenExecuteAsTool)'==''">false</ResGenExecuteAsTool>
  </PropertyGroup>
  <Target
      Name="ResGen"
      DependsOnTargets="$(ResGenDependsOn)"/>

<!--
    ============================================================
                                        BeforeResGen

Redefine this target in your project in order to run tasks just before Resgen.
    ============================================================
    -->
  <Target Name="BeforeResGen"/>

<!--
    ============================================================
                                        AfterResGen

Redefine this target in your project in order to run tasks just after Resgen.
    ============================================================
    -->
  <Target Name="AfterResGen"/>

<Target
      Name="CoreResGen"
      DependsOnTargets="$(CoreResGenDependsOn)">

<PropertyGroup>
      <GenerateResourceMSBuildArchitecture Condition="'$(GenerateResourceMSBuildArchitecture)' == ''">$(PlatformTargetAsMSBuildArchitecture)</GenerateResourceMSBuildArchitecture>

<ResgenToolPath Condition="'$(ResgenToolPath)' == ''">$(TargetFrameworkSDKToolsDirectory)</ResgenToolPath>
    </PropertyGroup>

<PropertyGroup Condition="'$(TargetFrameworkAsMSBuildRuntime)' != '' and '$(GenerateResourceMSBuildArchitecture)' != ''">
      <!-- In the general case, we want to fail to run the task if the task host it's requesting doesn't exist, because we'd rather let the
           user know there's something wrong than just silently generate something that's probably not quite right. However, in a few
           circumstances, there are tasks that are already aware of runtime / bitness concerns, in which case even if we go ahead and run
           the more recent version of the task, it should be able to generate something correct.  GenerateResource is one such task, so
           we check for the existence of the targeted task host so that we can use it preferentially, but if it can't be found, we'll fall
           back to the current task since it's still mostly correct.

In particular, we need to do this because otherwise people with Dev10 on a machine that they upgrade to Win8 will be broken:
           they'll have ResGen from the 7.0A SDK installed, so launching ResGen will still work, but the CLR2 task host is only installed by
           the 8.0A SDK, which they won't have installed, and thus without this fallback mechanism, their projects targeting v3.5 will
           suddenly start failing to build.-->
      <GenerateResourceMSBuildRuntime
          Condition="'$(GenerateResourceMSBuildRuntime)' == '' and
                     $([MSBuild]::DoesTaskHostExist(`$(TargetFrameworkAsMSBuildRuntime)`, `$(GenerateResourceMSBuildArchitecture)`))">$(TargetFrameworkAsMSBuildRuntime)</GenerateResourceMSBuildRuntime>

<GenerateResourceMSBuildRuntime Condition="'$(GenerateResourceMSBuildRuntime)' == ''">CurrentRuntime</GenerateResourceMSBuildRuntime>
    </PropertyGroup>

<GenerateResource
        Sources="@(EmbeddedResource)"
        UseSourcePath="$(UseSourcePath)"
        References="@(ReferencePathWithRefAssemblies)"
        UsePreserializedResources="$(GenerateResourceUsePreserializedResources)"
        AdditionalInputs="$(MSBuildAllProjects)"
        NeverLockTypeAssemblies="$(GenerateResourceNeverLockTypeAssemblies)"
        StateFile="$(IntermediateOutputPath)$(MSBuildProjectFile).GenerateResource.cache"
        StronglyTypedClassName="%(EmbeddedResource.StronglyTypedClassName)"
        StronglyTypedFileName="%(EmbeddedResource.StronglyTypedFileName)"
        StronglyTypedLanguage="%(EmbeddedResource.StronglyTypedLanguage)"
        StronglyTypedNamespace="%(EmbeddedResource.StronglyTypedNamespace)"
        StronglyTypedManifestPrefix="%(EmbeddedResource.StronglyTypedManifestPrefix)"
        PublicClass="%(EmbeddedResource.PublicClass)"
        OutputResources="@(EmbeddedResource->'$(IntermediateOutputPath)%(ManifestResourceName).resources')"
        Condition="'%(EmbeddedResource.Type)' == 'Resx' and '%(EmbeddedResource.GenerateResource)' != 'false' and '$(GenerateResourceMSBuildRuntime)' != 'CLR2'"
        SdkToolsPath="$(ResgenToolPath)"
        ExecuteAsTool="$(ResGenExecuteAsTool)"
        EnvironmentVariables="$(ResGenEnvironment)"
        MSBuildRuntime="$(GenerateResourceMSBuildRuntime)"
        MSBuildArchitecture="$(GenerateResourceMSBuildArchitecture)">

<Output TaskParameter="Sources" ItemName="_Temporary" />

</GenerateResource>

<GenerateResource
        Sources="@(EmbeddedResource)"
        UseSourcePath="$(UseSourcePath)"
        References="@(ReferencePath)"
        AdditionalInputs="$(MSBuildAllProjects)"
        NeverLockTypeAssemblies="$(GenerateResourceNeverLockTypeAssemblies)"
        StateFile="$(IntermediateOutputPath)$(MSBuildProjectFile).GenerateResource.cache"
        StronglyTypedClassName="%(EmbeddedResource.StronglyTypedClassName)"
        StronglyTypedFileName="%(EmbeddedResource.StronglyTypedFileName)"
        StronglyTypedLanguage="%(EmbeddedResource.StronglyTypedLanguage)"
        StronglyTypedNamespace="%(EmbeddedResource.StronglyTypedNamespace)"
        StronglyTypedManifestPrefix="%(EmbeddedResource.StronglyTypedManifestPrefix)"
        PublicClass="%(EmbeddedResource.PublicClass)"
        OutputResources="@(EmbeddedResource->'$(IntermediateOutputPath)%(ManifestResourceName).resources')"
        MSBuildRuntime="$(GenerateResourceMSBuildRuntime)"
        MSBuildArchitecture="$(GenerateResourceMSBuildArchitecture)"
        Condition="'%(EmbeddedResource.Type)' == 'Resx' and '%(EmbeddedResource.GenerateResource)' != 'false' and '$(GenerateResourceMSBuildRuntime)' == 'CLR2'">

</GenerateResource>

<EmbeddedResource Include="@(_Temporary)" />
      <_Temporary Remove="@(_Temporary)" />

<ManifestResourceWithNoCulture Include="@(EmbeddedResource->'%(OutputResource)')" Condition="'%(EmbeddedResource.WithCulture)'=='false' and '%(EmbeddedResource.Type)' == 'Resx'">
        <EmittedForCompatibilityOnly>true</EmittedForCompatibilityOnly>
      </ManifestResourceWithNoCulture>
      <ManifestNonResxWithNoCultureOnDisk Include="@(EmbeddedResource)" Condition="'%(EmbeddedResource.WithCulture)'=='false' and '%(EmbeddedResource.Type)' == 'Non-Resx'">
        <EmittedForCompatibilityOnly>true</EmittedForCompatibilityOnly>
      </ManifestNonResxWithNoCultureOnDisk>

<ManifestResourceWithCulture Include="@(EmbeddedResource->'%(OutputResource)')" Condition="'%(EmbeddedResource.WithCulture)'=='true' and '%(EmbeddedResource.Type)' == 'Resx'">
        <EmittedForCompatibilityOnly>true</EmittedForCompatibilityOnly>
      </ManifestResourceWithCulture>
      <ManifestNonResxWithCultureOnDisk Include="@(EmbeddedResource)" Condition="'%(EmbeddedResource.WithCulture)'=='true' and '%(EmbeddedResource.Type)' == 'Non-Resx'">
        <EmittedForCompatibilityOnly>true</EmittedForCompatibilityOnly>
      </ManifestNonResxWithCultureOnDisk>

</ItemGroup>

</Target>

<!--
    ============================================================
                                        CompileLicxFiles

Compile .licx files (containing information about licensed controls used by the application) into .licenses files.

[IN]
        @(_LicxFile) - The list of .licx files in the project (usually there will be just one)

[OUT]
        @(CompiledLicenseFile) - The list of compiled .licenses files (there will be just one)
    ============================================================
    -->
  <PropertyGroup>
    <CompileLicxFilesDependsOn></CompileLicxFilesDependsOn>
  </PropertyGroup>
  <Target
      Name="CompileLicxFiles"
      Condition="'@(_LicxFile)'!=''"
      DependsOnTargets="$(CompileLicxFilesDependsOn)"
      Inputs="$(MSBuildAllProjects);@(_LicxFile);@(ReferencePathWithRefAssemblies);@(ReferenceDependencyPaths)"
      Outputs="$(IntermediateOutputPath)$(TargetFileName).licenses">

<PropertyGroup>
      <LCMSBuildArchitecture Condition="'$(LCMSBuildArchitecture)' == ''">$(PlatformTargetAsMSBuildArchitecture)</LCMSBuildArchitecture>
    </PropertyGroup>

</LC>

</Target>

<!--
    ============================================================
                                        ResolveKeySource

Resolve the strong name key used to sign the assembly as well as the certificate used to
    sign the ClickOnce manifests.

[IN]
        $(AssemblyOriginatorKeyFile)     - The file used to sign the assembly (.snk or .pfx)
        $(ManifestCertificateThumbprint) - The thumbprint used to locate the certificate in the
                                           user's certificate store.
        $(ManifestKeyFile)               - The key file that contains the certificate in case the
                                           certificate is not in the user's store.

[OUT]
        $(ResolvedAssemblyKeyFile)        - Key used to sign the assembly
        $(_DeploymentResolvedManifestCertificateThumbprint) - Certificate used to sign the manifests
    ============================================================
    -->
  <Target
      Name="ResolveKeySource"
      Condition="$(SignManifests) == 'true' or $(SignAssembly) == 'true'">

</ResolveKeySource>

</Target>

<PropertyGroup>
    <CompileDependsOn>
      ResolveReferences;
      ResolveKeySource;
      SetWin32ManifestProperties;
      FindReferenceAssembliesForReferences;
      _GenerateCompileInputs;
      BeforeCompile;
      _TimeStampBeforeCompile;
      _GenerateCompileDependencyCache;
      CoreCompile;
      _TimeStampAfterCompile;
      AfterCompile;
    </CompileDependsOn>
  </PropertyGroup>
  <Target
      Name="Compile"
      DependsOnTargets="$(CompileDependsOn)"/>

<!--
    ============================================================
                                        _GenerateCompileInputs

Create the _CoreCompileResourceInputs list of inputs to the CoreCompile target.
    ============================================================
    -->
  <Target Name="_GenerateCompileInputs">

<_CoreCompileResourceInputs Include="@(EmbeddedResource->'%(OutputResource)')" Condition="'%(EmbeddedResource.WithCulture)' == 'false' and '%(EmbeddedResource.Type)' == 'Resx'" />
      <_CoreCompileResourceInputs Include="@(EmbeddedResource)" Condition="'%(EmbeddedResource.WithCulture)' == 'false' and '%(EmbeddedResource.Type)' == 'Non-Resx' " />

<_CoreCompileResourceInputs Include="@(ManifestResourceWithNoCulture)" Condition="'%(ManifestResourceWithNoCulture.EmittedForCompatibilityOnly)'==''">
        <Type>Resx</Type>
        <WithCulture>false</WithCulture>
      </_CoreCompileResourceInputs>
      <_CoreCompileResourceInputs Include="@(ManifestNonResxWithNoCultureOnDisk)" Condition="'%(ManifestNonResxWithNoCultureOnDisk.EmittedForCompatibilityOnly)'==''">
        <Type>Non-Resx</Type>
        <WithCulture>false</WithCulture>
      </_CoreCompileResourceInputs>

</ItemGroup>

</Target>

<!--
    ============================================================
                                        GenerateTargetFrameworkMonikerAttribute

Emit the target framework moniker attribute as  a code fragment into a temporary source file for the compiler.
    ============================================================
    -->
  <PropertyGroup Condition="'$(TargetFrameworkMoniker)' != ''">
    
    <TargetFrameworkMonikerAssemblyAttributesFileClean Condition="'$(TargetFrameworkMonikerAssemblyAttributesFileClean)' == '' and '$(TargetFrameworkMonikerAssemblyAttributesPath)' != ''">true</TargetFrameworkMonikerAssemblyAttributesFileClean>
    <TargetFrameworkMonikerAssemblyAttributesPath Condition="'$(TargetFrameworkMonikerAssemblyAttributesPath)' == ''">$([System.IO.Path]::Combine('$([System.IO.Path]::GetTempPath())','$(TargetFrameworkMoniker).AssemblyAttributes$(DefaultLanguageSourceExtension)'))</TargetFrameworkMonikerAssemblyAttributesPath>
  </PropertyGroup>

<WriteLinesToFile
        File="$(TargetFrameworkMonikerAssemblyAttributesPath)"
        Lines="$(TargetFrameworkMonikerAssemblyAttributeText)"
        Overwrite="true"
        ContinueOnError="true"
        Condition="'@(Compile)' != '' and '$(TargetFrameworkMonikerAssemblyAttributeText)' != ''"
        />

<!--
    ============================================================
                                        GenerateAdditionalSources

Emit any specified code fragments into a temporary source file for the compiler.
    ============================================================
    -->

<!--
    ============================================================
                                        BeforeCompile

Redefine this target in your project in order to run tasks just before Compile.
    ============================================================
    -->
  <Target Name="BeforeCompile"/>

<!--
    ============================================================
                                        AfterCompile

Redefine this target in your project in order to run tasks just after Compile.
    ============================================================
    -->
  <Target Name="AfterCompile"/>

<!--
    ============================================================
                                        _TimeStampBeforeCompile

If post-build events are set to fire "OnOutputUpdated", then take before
    and after timestamps so that we can compare them.
    ============================================================
    -->
  <Target
      Name="_TimeStampBeforeCompile"
      Condition="'$(RunPostBuildEvent)'=='OnOutputUpdated' or ('$(RegisterForComInterop)'=='true' and '$(OutputType)'=='library')">

<PropertyGroup>
      <_AssemblyTimestampBeforeCompile>%(IntermediateAssembly.ModifiedTime)</_AssemblyTimestampBeforeCompile>
    </PropertyGroup>

</Target>

<!--
    ============================================================
                                        _GenerateCompileDependencyCache

Generate a file used to track compiler dependencies between incremental build
    executions. This handles cases where items are added or removed from a glob (e.g.
    <Compile Include="**\*.cs" />) and can't otherwise be detected with timestamp
    comparisons. The file contains a hash of compiler inputs that are known to
    contribute to incremental build inconsistencies.
    ============================================================
    -->
  <Target Name="_GenerateCompileDependencyCache" Condition="'$(DesignTimeBuild)' != 'true' and '$(BuildingProject)' == 'true'" DependsOnTargets="ResolveAssemblyReferences">
    <ItemGroup>
      <CustomAdditionalCompileInputs Include="$(IntermediateOutputPath)$(MSBuildProjectFile).CoreCompileInputs.cache" />
      <CoreCompileCache Include="@(Compile)" />
      <CoreCompileCache Include="@(ReferencePath)" />
      <CoreCompileCache Include="$(DefineConstants)" />
    </ItemGroup>

<!--
    ============================================================
                                        _TimeStampAfterCompile

If post-build events are set to fire "OnOutputUpdated", then take before
    and after timestamps so that we can compare them.
    ============================================================
    -->
  <Target
      Name="_TimeStampAfterCompile"
      Condition="'$(RunPostBuildEvent)'=='OnOutputUpdated' or ('$(RegisterForComInterop)'=='true' and '$(OutputType)'=='library')">

<PropertyGroup>
      <_AssemblyTimestampAfterCompile>%(IntermediateAssembly.ModifiedTime)</_AssemblyTimestampAfterCompile>
    </PropertyGroup>

</Target>

<!--
    ================================================================
                                        _ComputeNonExistentFileProperty

There are certain situations in which we want to always run the CoreCompile target (and
    thus the Csc task), even if the timestamps of the outputs appear to be up-to-date on disk.
    If we're inside the IDE during design-time, then the Csc/Vbc/Vjc task is simply being used to
    initialize the host compiler, so we always want to run it.  Also, if we're inside the IDE, and
    the host compiler is responsible for doing the compilation during an actual build, we want to let
    the host compiler determine whether the output is up-to-date, because there may be source files
    in the IDE's in-memory buffers that we don't know about.

So, we always run the CoreCompile target if we're in the IDE, and either we're in design-time or
    we're delegating to the host compiler for the actual build.

We compare against BuildOutOfProcess != true because we cannot assume that the build process will
    have set BuildOutOfProcess to true or false. Therefore the default behavior should be to do the
    legacy behavior seen before BuildingOutOfProcess was introduced if the property is not set.
    ================================================================
    -->
  <Target
      Name="_ComputeNonExistentFileProperty"
      Condition="('$(BuildingInsideVisualStudio)' == 'true') and ('$(BuildingOutOfProcess)' != 'true') and (('$(BuildingProject)' == 'false') or ('$(UseHostCompilerIfAvailable)' == 'true'))">

<PropertyGroup>
      <NonExistentFile>__NonExistentSubDir__\__NonExistentFile__</NonExistentFile>
    </PropertyGroup>

</Target>

<PropertyGroup>
    <_SGenDllName>$(TargetName).XmlSerializers.dll</_SGenDllName>
    <_SGenDllCreated>false</_SGenDllCreated>
    <_SGenGenerateSerializationAssembliesConfig>$(GenerateSerializationAssemblies)</_SGenGenerateSerializationAssembliesConfig>
    <_SGenGenerateSerializationAssembliesConfig Condition="'$(GenerateSerializationAssemblies)' == ''">Auto</_SGenGenerateSerializationAssembliesConfig>
    <_SGenGenerateSerializationAssembliesConfig Condition="'$(ConfigurationName)'=='Debug' and '$(_SGenGenerateSerializationAssembliesConfig)' == 'Auto'">Off</_SGenGenerateSerializationAssembliesConfig>
    <SGenUseProxyTypes Condition="'$(SGenUseProxyTypes)' == ''">true</SGenUseProxyTypes>
    <SGenUseKeep Condition="'$(SGenUseKeep)'==''">false</SGenUseKeep>
    <SGenShouldGenerateSerializer Condition="'$(SGenShouldGenerateSerializer)' == ''">true</SGenShouldGenerateSerializer>
  </PropertyGroup>

<!--
    ============================================================
                                        GenerateSerializationAssemblies

Run GenerateSerializationAssemblies on the assembly produced by this build.

[IN]
        @(BuildAssemblyName) - The assembly generated by this build.
        @(BuildAssemblyPath) - The path where the assembly resides.
        @(ReferencePath) - The list of references used by this assembly.

[OUT]
        @(SerializationAssembly) - The path to the serialization assembly.  Maybe we'll just append to an existing list.
    ============================================================
    -->
  <Target
      Name="GenerateSerializationAssemblies"
      Condition="'$(_SGenGenerateSerializationAssembliesConfig)' == 'On' or ('@(WebReferenceUrl)'!='' and '$(_SGenGenerateSerializationAssembliesConfig)' == 'Auto')"
      DependsOnTargets="AssignTargetPaths;Compile;ResolveKeySource"
      Inputs="$(MSBuildAllProjects);@(IntermediateAssembly)"
      Outputs="$(IntermediateOutputPath)$(_SGenDllName)">

<PropertyGroup>
      <SGenMSBuildArchitecture Condition="'$(SGenMSBuildArchitecture)' == ''">$(PlatformTargetAsMSBuildArchitecture)</SGenMSBuildArchitecture>
    </PropertyGroup>

</SGen>

</Target>

<!--
    ============================================================
                                        CreateSatelliteAssemblies

Create one satellite assembly for every unique culture in the resources.
    ============================================================
    -->
  <PropertyGroup>
    <CreateSatelliteAssembliesDependsOn>
      _GenerateSatelliteAssemblyInputs;
      ComputeIntermediateSatelliteAssemblies;
      GenerateSatelliteAssemblies
    </CreateSatelliteAssembliesDependsOn>
  </PropertyGroup>
  <Target
      Name="CreateSatelliteAssemblies"
      DependsOnTargets="$(CreateSatelliteAssembliesDependsOn)" />

<!--
    ============================================================
                                        _GenerateSatelliteAssemblyInputs

Create the _SatelliteAssemblyResourceInputs list of inputs to the CreateSatelliteAssemblies target.
    ============================================================
    -->
  <Target Name="_GenerateSatelliteAssemblyInputs">

<ItemGroup>
      
      <_SatelliteAssemblyResourceInputs Include="@(EmbeddedResource->'%(OutputResource)')" Condition="'%(EmbeddedResource.WithCulture)' == 'true' and '%(EmbeddedResource.Type)' == 'Resx'" />
      <_SatelliteAssemblyResourceInputs Include="@(EmbeddedResource)" Condition="'%(EmbeddedResource.WithCulture)' == 'true' and '%(EmbeddedResource.Type)' == 'Non-Resx'" />

<_SatelliteAssemblyResourceInputs Include="@(ManifestResourceWithCulture)" Condition="'%(ManifestResourceWithCulture.EmittedForCompatibilityOnly)'==''">
        <Type>Resx</Type>
        <WithCulture>true</WithCulture>
      </_SatelliteAssemblyResourceInputs>
      <_SatelliteAssemblyResourceInputs Include="@(ManifestNonResxWithCultureOnDisk)" Condition="'%(ManifestNonResxWithCultureOnDisk.EmittedForCompatibilityOnly)'==''">
        <Type>Non-Resx</Type>
        <WithCulture>true</WithCulture>
      </_SatelliteAssemblyResourceInputs>

</ItemGroup>
  </Target>

<!--
    ============================================================
                                        GenerateSatelliteAssemblies

Actually run al.exe to create the satellite assemblies.
    ============================================================
    -->
  <Target Name="GenerateSatelliteAssemblies"
          Inputs="$(MSBuildAllProjects);@(_SatelliteAssemblyResourceInputs);$(IntermediateOutputPath)$(TargetName)$(TargetExt)"
          Outputs="$(IntermediateOutputPath)%(Culture)\$(TargetName).resources.dll"
          Condition="'@(_SatelliteAssemblyResourceInputs)' != '' and '$(GenerateSatelliteAssembliesForCore)' != 'true'">

<MakeDir
        Directories="@(EmbeddedResource->'$(IntermediateOutputPath)%(Culture)')" />

</AL>

</Target>
  <!--
    ============================================================
                                        ComputeIntermediateSatelliteAssemblies

Compute the paths to the intermediate satellite assemblies,
    with culture attributes so we can copy them to the right place.
    ============================================================
    -->
  <PropertyGroup>
    <ComputeIntermediateSatelliteAssembliesDependsOn>
      CreateManifestResourceNames
    </ComputeIntermediateSatelliteAssembliesDependsOn>
  </PropertyGroup>
  <Target
      Name="ComputeIntermediateSatelliteAssemblies"
      Condition="@(EmbeddedResource->'%(WithCulture)') != ''"
      DependsOnTargets="$(ComputeIntermediateSatelliteAssembliesDependsOn)">

<ItemGroup>
      <IntermediateSatelliteAssembliesWithTargetPath Include="$(IntermediateOutputPath)%(EmbeddedResource.Culture)\$(TargetName).resources.dll"
                                                     Condition="'%(EmbeddedResource.Culture)' != ''">
        <Culture>%(EmbeddedResource.Culture)</Culture>
        <TargetPath>%(EmbeddedResource.Culture)\$(TargetName).resources.dll</TargetPath>
      </IntermediateSatelliteAssembliesWithTargetPath>
    </ItemGroup>
  </Target>

<PropertyGroup>
    <EmbeddedWin32Manifest>$(Win32Manifest)</EmbeddedWin32Manifest>
  </PropertyGroup>

<!--
    ============================================================
                                        SetWin32ManifestProperties

Set Win32Manifest and EmbeddedManifest properties to be used later in the build.
    ============================================================
    -->
  <Target
      Name="SetWin32ManifestProperties"
      Condition="'$(Win32Manifest)'==''"
      DependsOnTargets="ResolveComReferences;ResolveNativeReferences;_SetExternalWin32ManifestProperties;_SetEmbeddedWin32ManifestProperties" />

<PropertyGroup>
      
      <_DeploymentBaseManifest>$(ApplicationManifest)</_DeploymentBaseManifest>
      <_DeploymentBaseManifest Condition="'$(_DeploymentBaseManifest)'==''">@(_DeploymentBaseManifestWithTargetPath)</_DeploymentBaseManifest>

<NoWin32Manifest Condition="'$(NoWin32Manifest)'==''">true</NoWin32Manifest>
    </PropertyGroup>

</Target>

<PropertyGroup>
      <EmbeddedWin32Manifest>$(ApplicationManifest)</EmbeddedWin32Manifest>
      <Win32Manifest>$(ApplicationManifest)</Win32Manifest>
    </PropertyGroup>

<PropertyGroup>
      <EmbeddedWin32Manifest  Condition="'$(ApplicationManifest)'=='' and '$(NoWin32Manifest)'!='true' and Exists('$(_FrameworkVersion40Path)\default.win32manifest')">$(_FrameworkVersion40Path)\default.win32manifest</EmbeddedWin32Manifest>
    </PropertyGroup>

</Target>

<!--
    ============================================================
                                        GenerateManifests

Generates ClickOnce application and deployment manifests or a native manifest.
    ============================================================
    -->
  <PropertyGroup>
    <GenerateManifestsDependsOn>
      SetWin32ManifestProperties;
      GenerateApplicationManifest;
      GenerateDeploymentManifest
    </GenerateManifestsDependsOn>
  </PropertyGroup>

<!--
    ============================================================
                  _GenerateResolvedDeploymentManifestEntryPoint

Use the ResolveManifestFiles to generate the GenerateResolvedDeploymentManifestEntryPoint

============================================================
    -->
  <Target
      Name="_GenerateResolvedDeploymentManifestEntryPoint">
    <ItemGroup>
      <_DeploymentPublishFileOfTypeManifestEntryPoint Include="@(PublishFile)" Condition="'%(FileType)'=='ManifestEntryPoint'"/>
    </ItemGroup>

</ResolveManifestFiles>
  </Target>

<!--
    ============================================================
                                        GenerateApplicationManifest

Generates a ClickOnce or native application manifest.
    An application manifest specifies declarative application identity, dependency and security information.

[IN]
        $(_DeploymentBaseManifest) - The base app.manifest from project.
        @(ResolvedIsolatedComModules) - The list of COM references to be isolated as reg-free COM dependencies for native assembly loader.
        @(_DeploymentManifestFiles) - The list of loose files (content, pdb, xml, etc.) for ClickOnce.
        @(_DeploymentManifestDependencies) - The list of application dependencies (typically this is the set of assembly dependencies in bin\) for ClickOnce.
        @(AppConfigWithTargetPath) - App config file, if present.
        $(_DeploymentManifestType) - Type of manifest to be generated, either "Native" or "ClickOnce".

[OUT]
        @(ApplicationManifest) - Generated native or ClickOnce application manifest, i.e. WindowsApplication1.exe.manifest
    ============================================================
    -->
  <Target
      Name="GenerateApplicationManifest"
      DependsOnTargets="
            _DeploymentComputeNativeManifestInfo;
            _DeploymentComputeClickOnceManifestInfo;
            ResolveComReferences;
            ResolveNativeReferences;
            _GenerateResolvedDeploymentManifestEntryPoint"
      Inputs="
            $(MSBuildAllProjects);
            @(AppConfigWithTargetPath);
            $(_DeploymentBaseManifest);
            @(ResolvedIsolatedComModules);
            @(_DeploymentManifestDependencies);
            @(_DeploymentResolvedManifestEntryPoint);
            @(_DeploymentManifestFiles)"
      Outputs="@(ApplicationManifest)">

</GenerateApplicationManifest>

</Target>

<!--
    ============================================================
                                        _DeploymentComputeNativeManifestInfo

Compute info for native manifest generation
    ============================================================
    -->
  <Target
      Name="_DeploymentComputeNativeManifestInfo"
      Condition="'$(GenerateClickOnceManifests)'!='true'">

<ResolveManifestFiles NativeAssemblies="@(NativeReferenceFile);@(_DeploymentNativePrerequisite)">
      <Output TaskParameter="OutputAssemblies" ItemName="_DeploymentManifestDependencies"/>
    </ResolveManifestFiles>

<PropertyGroup>
      <_DeploymentManifestType>Native</_DeploymentManifestType>
    </PropertyGroup>

<GetAssemblyIdentity AssemblyFiles="@(IntermediateAssembly)">
      <Output TaskParameter="Assemblies" ItemName="_IntermediateAssemblyIdentity"/>
    </GetAssemblyIdentity>

<PropertyGroup>
      <_DeploymentManifestVersion>@(_IntermediateAssemblyIdentity->'%(Version)')</_DeploymentManifestVersion>
    </PropertyGroup>

</Target>

<!--
    ============================================================
                                        _DeploymentComputeClickOnceManifestInfo

Compute info for  ClickOnce manifest generation
    ============================================================
    -->
  <Target
      Name="_DeploymentComputeClickOnceManifestInfo"
      Condition="'$(GenerateClickOnceManifests)'=='true'"
      DependsOnTargets="
            CleanPublishFolder;
            _DeploymentGenerateTrustInfo">

<ItemGroup>
      <_SGenDllsRelatedToCurrentDll Include="@(_ReferenceSerializationAssemblyPaths->'%(FullPath)')" Condition="'%(Extension)' == '.dll'"/>
      <_SGenDllsRelatedToCurrentDll Include="@(SerializationAssembly->'%(FullPath)')" Condition="'%(Extension)' == '.dll'"/>
    </ItemGroup>

<ItemGroup>
      <_SatelliteAssemblies Include="@(IntermediateSatelliteAssembliesWithTargetPath);@(ReferenceSatellitePaths)" />
      <_DeploymentReferencePaths Include="@(ReferenceCopyLocalPaths)"
                                 Condition="'%(Extension)' == '.dll' Or '%(Extension)' == '.exe'">
        <IsPrimary>true</IsPrimary>
      </_DeploymentReferencePaths>
      <_DeploymentReferencePaths Include="@(_DeploymentReferencePaths);@(_CopyLocalFalseRefPathsWithExclusion)" />
      <_ManifestManagedReferences Include="@(_DeploymentReferencePaths);@(ReferenceDependencyPaths);@(_SGenDllsRelatedToCurrentDll);@(SerializationAssembly);@(ReferenceCOMWrappersToCopyLocal)"
                               Exclude="@(_SatelliteAssemblies);@(_ReferenceScatterPaths);@(_ExcludedAssembliesFromManifestGeneration)" />
    </ItemGroup>

<Copy
      SourceFiles="@(_DeploymentManifestEntryPoint)"
      DestinationFolder="$(PublishDir)">

<SignFile
      CertificateThumbprint="$(_DeploymentResolvedManifestCertificateThumbprint)"
      TimestampUrl="$(ManifestTimestampUrl)"
      SigningTarget="@(_DeploymentClickOnceApplicationExecutable)"
      Condition="'$(_DeploymentResolvedManifestCertificateThumbprint)'!='' and '$(_DeploymentSignClickOnceManifests)'=='true' and '$(TargetExt)' == '.exe'"
      />

<ResolveManifestFiles
        TargetFrameworkVersion="$(TargetFrameworkVersion)"
        SigningManifests="$(SignManifests)"
        EntryPoint="@(_DeploymentClickOnceApplicationExecutable)"
        ExtraFiles="@(_DebugSymbolsIntermediatePath);$(IntermediateOutputPath)$(TargetName).xml;@(_ReferenceRelatedPaths)"
        Files="@(ContentWithTargetPath);@(_DeploymentManifestIconFile);@(AppConfigWithTargetPath)"
        ManagedAssemblies="@(_ManifestManagedReferences)"
        NativeAssemblies="@(NativeReferenceFile);@(_DeploymentNativePrerequisite)"
        PublishFiles="@(PublishFile)"
        SatelliteAssemblies="@(_SatelliteAssemblies)"
        TargetCulture="$(TargetCulture)">

</ResolveManifestFiles>

<ItemGroup>
      <_DeploymentManifestDependencies Include="@(_DeploymentManifestDependenciesUnfiltered)"
          Condition="!('%(_DeploymentManifestDependenciesUnfiltered.CopyLocal)' == 'false' And '%(_DeploymentManifestDependenciesUnfiltered.DependencyType)' != 'Install')" />
    </ItemGroup>

<PropertyGroup>
      <_DeploymentManifestType>ClickOnce</_DeploymentManifestType>
    </PropertyGroup>

<FormatVersion Version="$(ApplicationVersion)" Revision="$(ApplicationRevision)">
      <Output TaskParameter="OutputVersion" PropertyName="_DeploymentManifestVersion"/>
    </FormatVersion>

</Target>

<!--
    ============================================================
                                        _DeploymentGenerateTrustInfo

Generates the application permission set for inclusion in the generated ClickOnce application manifest.
    ============================================================
    -->
  <Target
      Name="_DeploymentGenerateTrustInfo"
      Condition="'$(TargetZone)'!=''"
      Inputs="
            $(MSBuildAllProjects);
            $(_DeploymentBaseManifest);
            "
      Outputs="@(_DeploymentIntermediateTrustInfoFile)">

</GenerateTrustInfo>

</Target>

<!--
    ============================================================
                                        GenerateDeploymentManifest

Generates a ClickOnce deployment manifest.
    An deployment manifest specifies declarative application identity and application update information.
    ============================================================
    -->
  <Target
      Name="GenerateDeploymentManifest"
      DependsOnTargets="GenerateApplicationManifest"
      Inputs="
            $(MSBuildAllProjects);
            @(ApplicationManifest)
            "
      Outputs="@(DeployManifest)">

</GenerateDeploymentManifest>

</Target>

<PropertyGroup>
    <SkipCopyUnchangedFiles Condition="'$(SkipCopyUnchangedFiles)' == ''">true</SkipCopyUnchangedFiles>
    <UseCommonOutputDirectory Condition="'$(UseCommonOutputDirectory)' == ''">false</UseCommonOutputDirectory>
  </PropertyGroup>

<!--
    ============================================================
                                        PrepareForRun

Copy the build outputs to the final directory if they have changed.
    ============================================================
    -->
  <PropertyGroup>
    <PrepareForRunDependsOn>
      CopyFilesToOutputDirectory
    </PrepareForRunDependsOn>
  </PropertyGroup>
  <Target
      Name="PrepareForRun"
      DependsOnTargets="$(PrepareForRunDependsOn)"/>

<!--
    ============================================================
                                        CopyFilesToOutputDirectory

Copy all build outputs, satellites and other necessary files to the final directory.
    ============================================================
    -->
  <PropertyGroup>
    
    <CreateHardLinksForCopyAdditionalFilesIfPossible Condition="'$(BuildingInsideVisualStudio)' == 'true' or '$(CreateHardLinksForCopyAdditionalFilesIfPossible)' == ''">false</CreateHardLinksForCopyAdditionalFilesIfPossible>
    <CreateSymbolicLinksForCopyAdditionalFilesIfPossible Condition="'$(BuildingInsideVisualStudio)' == 'true' or '$(CreateSymbolicLinksForCopyAdditionalFilesIfPossible)' == ''">false</CreateSymbolicLinksForCopyAdditionalFilesIfPossible>
  </PropertyGroup>

<PropertyGroup>
      
      <CreateHardLinksForCopyFilesToOutputDirectoryIfPossible Condition="'$(BuildingInsideVisualStudio)' == 'true' or '$(CreateHardLinksForCopyFilesToOutputDirectoryIfPossible)' == ''">false</CreateHardLinksForCopyFilesToOutputDirectoryIfPossible>
      <CreateSymbolicLinksForCopyFilesToOutputDirectoryIfPossible Condition="'$(BuildingInsideVisualStudio)' == 'true' or '$(CreateSymbolicLinksForCopyFilesToOutputDirectoryIfPossible)' == ''">false</CreateSymbolicLinksForCopyFilesToOutputDirectoryIfPossible>
      <ErrorIfLinkFailsForCopyFilesToOutputDirectory Condition="'$(BuildingInsideVisualStudio)' == 'true' or '$(ErrorIfLinkFailsForCopyFilesToOutputDirectory)' == ''">false</ErrorIfLinkFailsForCopyFilesToOutputDirectory>
    </PropertyGroup>

<Copy
        SourceFiles="@(IntermediateAssembly)"
        DestinationFolder="$(OutDir)"
        SkipUnchangedFiles="$(SkipCopyUnchangedFiles)"
        OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
        Retries="$(CopyRetryCount)"
        RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
        UseHardlinksIfPossible="$(CreateHardLinksForCopyFilesToOutputDirectoryIfPossible)"
        UseSymboliclinksIfPossible="$(CreateSymbolicLinksForCopyFilesToOutputDirectoryIfPossible)"
        ErrorIfLinkFails="$(ErrorIfLinkFailsForCopyFilesToOutputDirectory)"
        Condition="'$(CopyBuildOutputToOutputDirectory)' == 'true' and '$(SkipCopyBuildProduct)' != 'true'"
            >

</Copy>

<CopyRefAssembly
        SourcePath="@(IntermediateRefAssembly)"
        DestinationPath="$(TargetRefPath)"
        Condition="'$(ProduceReferenceAssembly)' == 'true' and '$(CopyBuildOutputToOutputDirectory)' == 'true' and '$(SkipCopyBuildProduct)' != 'true'"
            >

</CopyRefAssembly>

<Message Importance="High" Text="$(MSBuildProjectName) -&gt; @(MainAssembly->'%(FullPath)')" Condition="'$(CopyBuildOutputToOutputDirectory)' == 'true' and '$(SkipCopyBuildProduct)'!='true'" />

<Copy
        SourceFiles="@(AddModules)"
        DestinationFolder="$(OutDir)"
        SkipUnchangedFiles="$(SkipCopyUnchangedFiles)"
        OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
        Retries="$(CopyRetryCount)"
        RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
        UseHardlinksIfPossible="$(CreateHardLinksForCopyAdditionalFilesIfPossible)"
        UseSymboliclinksIfPossible="$(CreateSymbolicLinksForCopyAdditionalFilesIfPossible)"
        Condition="'@(AddModules)' != ''"
            >

</Copy>

<Copy
        SourceFiles="$(IntermediateOutputPath)$(_SGenDllName)"
        DestinationFiles="$(OutDir)$(_SGenDllName)"
        SkipUnchangedFiles="$(SkipCopyUnchangedFiles)"
        OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
        Retries="$(CopyRetryCount)"
        RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
        UseHardlinksIfPossible="$(CreateHardLinksForCopyFilesToOutputDirectoryIfPossible)"
        UseSymboliclinksIfPossible="$(CreateSymbolicLinksForCopyFilesToOutputDirectoryIfPossible)"
        ErrorIfLinkFails="$(ErrorIfLinkFailsForCopyFilesToOutputDirectory)"
        Condition="'$(_SGenDllCreated)'=='true'">

</Copy>

<Copy
        SourceFiles="@(_DebugSymbolsIntermediatePath)"
        DestinationFiles="@(_DebugSymbolsOutputPath)"
        SkipUnchangedFiles="$(SkipCopyUnchangedFiles)"
        OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
        Retries="$(CopyRetryCount)"
        RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
        UseHardlinksIfPossible="$(CreateHardLinksForCopyFilesToOutputDirectoryIfPossible)"
        UseSymboliclinksIfPossible="$(CreateSymbolicLinksForCopyFilesToOutputDirectoryIfPossible)"
        ErrorIfLinkFails="$(ErrorIfLinkFailsForCopyFilesToOutputDirectory)"
        Condition="'$(_DebugSymbolsProduced)'=='true' and '$(SkipCopyingSymbolsToOutputDirectory)' != 'true' and '$(CopyOutputSymbolsToOutputDirectory)'=='true'">

</Copy>

<Copy
        SourceFiles="@(DocFileItem)"
        DestinationFiles="@(FinalDocFile)"
        SkipUnchangedFiles="$(SkipCopyUnchangedFiles)"
        OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
        Retries="$(CopyRetryCount)"
        RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
        UseHardlinksIfPossible="$(CreateHardLinksForCopyFilesToOutputDirectoryIfPossible)"
        UseSymboliclinksIfPossible="$(CreateSymbolicLinksForCopyFilesToOutputDirectoryIfPossible)"
        ErrorIfLinkFails="$(ErrorIfLinkFailsForCopyFilesToOutputDirectory)"
        Condition="'$(_DocumentationFileProduced)'=='true' and '$(CopyDocumentationFileToOutputDirectory)'=='true'">

</Copy>

<Copy
        SourceFiles="@(IntermediateSatelliteAssembliesWithTargetPath)"
        DestinationFiles="@(IntermediateSatelliteAssembliesWithTargetPath->'$(OutDir)%(Culture)\$(TargetName).resources.dll')"
        SkipUnchangedFiles="$(SkipCopyUnchangedFiles)"
        OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
        Retries="$(CopyRetryCount)"
        RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
        UseHardlinksIfPossible="$(CreateHardLinksForCopyFilesToOutputDirectoryIfPossible)"
        UseSymboliclinksIfPossible="$(CreateSymbolicLinksForCopyFilesToOutputDirectoryIfPossible)"
        ErrorIfLinkFails="$(ErrorIfLinkFailsForCopyFilesToOutputDirectory)"
        Condition="'@(IntermediateSatelliteAssembliesWithTargetPath)' != ''"
            >

</Copy>

<Copy
        SourceFiles="@(ReferenceComWrappersToCopyLocal); @(ResolvedIsolatedComModules); @(_DeploymentLooseManifestFile); @(NativeReferenceFile)"
        DestinationFolder="$(OutDir)"
        SkipUnchangedFiles="$(SkipCopyUnchangedFiles)"
        OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
        Retries="$(CopyRetryCount)"
        RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
        UseHardlinksIfPossible="$(CreateHardLinksForCopyAdditionalFilesIfPossible)"
        UseSymboliclinksIfPossible="$(CreateSymbolicLinksForCopyAdditionalFilesIfPossible)"
        Condition="'@(ReferenceComWrappersToCopyLocal)' != '' or '@(ResolvedIsolatedComModules)' != '' or '@(_DeploymentLooseManifestFile)' != '' or '@(NativeReferenceFile)' != '' "
            >

</Copy>

<Copy
        SourceFiles="@(WinMDExpArtifacts)"
        DestinationFolder="$(OutDir)"
        SkipUnchangedFiles="$(SkipCopyUnchangedFiles)"
        OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
        Retries="$(CopyRetryCount)"
        RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
        UseHardlinksIfPossible="$(CreateHardLinksForCopyFilesToOutputDirectoryIfPossible)"
        UseSymboliclinksIfPossible="$(CreateSymbolicLinksForCopyFilesToOutputDirectoryIfPossible)"
        ErrorIfLinkFails="$(ErrorIfLinkFailsForCopyFilesToOutputDirectory)"
        Condition="'$(SkipCopyWinMDArtifact)' != 'true' and '@(WinMDExpArtifacts)' != ''"
            >
      <Output TaskParameter="DestinationFiles" ItemName="FileWrites"/>
      <Output TaskParameter="DestinationFiles" ItemName="FinalWinmdExpArtifacts" />
    </Copy>

</Target>

<!--
    ============================================================
                                        _CopyFilesMarkedCopyLocal

Copy references that are marked as "CopyLocal" and their dependencies, including .pdbs, .xmls and satellites.
    ============================================================
    -->
  <Target
      Name="_CopyFilesMarkedCopyLocal"
      Condition="'@(ReferenceCopyLocalPaths)' != ''"
        >

<PropertyGroup>
      
      <CreateHardLinksForCopyLocalIfPossible Condition="'$(BuildingInsideVisualStudio)' == 'true' or '$(CreateHardLinksForCopyLocalIfPossible)' == ''">false</CreateHardLinksForCopyLocalIfPossible>
      <CreateSymbolicLinksForCopyLocalIfPossible Condition="'$(BuildingInsideVisualStudio)' == 'true' or '$(CreateSymbolicLinksForCopyLocalIfPossible)' == ''">false</CreateSymbolicLinksForCopyLocalIfPossible>
    </PropertyGroup>

<Copy
        SourceFiles="@(ReferenceCopyLocalPaths)"
        DestinationFiles="@(ReferenceCopyLocalPaths->'$(OutDir)%(DestinationSubDirectory)%(Filename)%(Extension)')"
        SkipUnchangedFiles="$(SkipCopyUnchangedFiles)"
        OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
        Retries="$(CopyRetryCount)"
        RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
        UseHardlinksIfPossible="$(CreateHardLinksForCopyLocalIfPossible)"
        UseSymboliclinksIfPossible="$(CreateSymbolicLinksForCopyLocalIfPossible)"
        Condition="'$(UseCommonOutputDirectory)' != 'true'"
            >

</Copy>

<Touch Files="@(CopyUpToDateMarker)"
           AlwaysCreate="true"
           Condition="'@(ReferencesCopiedInThisBuild)' != ''">
        <Output TaskParameter="TouchedFiles" ItemName="FileWrites" />
    </Touch>

</Target>

<Target
      Name="_CopySourceItemsToOutputDirectory"
      DependsOnTargets="
            GetCopyToOutputDirectoryItems;
            _CopyOutOfDateSourceItemsToOutputDirectory;
            _CopyOutOfDateSourceItemsToOutputDirectoryAlways"/>

<!--
    ============================================================
                                        GetCopyToOutputDirectoryItems

Get all project items that may need to be transferred to the output directory.
    This includes baggage items from transitively referenced projects. It would appear
    that this target computes full transitive closure of content items for all referenced
    projects; however that is not the case. It only collects the content items from its
    immediate children and not children of children. The reason this happens is that
    the ProjectReferenceWithConfiguration list that is consumed by _SplitProjectReferencesByFileExistence
    is only populated in the current project and is empty in the children. The empty list
    causes _MSBuildProjectReferenceExistent to be empty and terminates the recursion.
    ============================================================
    -->
  <PropertyGroup>
    <_TargetsThatPrepareProjectReferences>_SplitProjectReferencesByFileExistence</_TargetsThatPrepareProjectReferences>
    <!--
      GetCopyToOutputDirectoryItems depends on an unspecified dependency _SplitProjectReferencesByFileExistence -> AssignProjectConfiguration (https://github.com/microsoft/msbuild/issues/4677).
      When the unspecified dependency does not happen by accident, content copying is only 1 level deep instead of transitive.
      This target enforces the dependency.

TODO: make transitive content copying the default when the breaking change is acceptable.
    -->
    <_TargetsThatPrepareProjectReferences Condition=" '$(MSBuildCopyContentTransitively)' == 'true' ">
      AssignProjectConfiguration;
      _SplitProjectReferencesByFileExistence
    </_TargetsThatPrepareProjectReferences>

<GetCopyToOutputDirectoryItemsDependsOn>
      AssignTargetPaths;
      $(_TargetsThatPrepareProjectReferences);
      _GetProjectReferenceTargetFrameworkProperties;
      _PopulateCommonStateForGetCopyToOutputDirectoryItems
    </GetCopyToOutputDirectoryItemsDependsOn>

<_RecursiveTargetForContentCopying>GetCopyToOutputDirectoryItems</_RecursiveTargetForContentCopying>
    
    <_RecursiveTargetForContentCopying Condition=" '$(MSBuildCopyContentTransitively)' == 'false' ">_GetCopyToOutputDirectoryItemsFromThisProject</_RecursiveTargetForContentCopying>
  </PropertyGroup>

<Target Name="_PopulateCommonStateForGetCopyToOutputDirectoryItems">
    
    <PropertyGroup Condition=" '$(MSBuildDisableGetCopyToOutputDirectoryItemsOptimization)' == '' ">
      <_GCTODIKeepDuplicates>false</_GCTODIKeepDuplicates>
      <_GCTODIKeepMetadata>CopyToOutputDirectory;TargetPath</_GCTODIKeepMetadata>
    </PropertyGroup>
  </Target>

<MSBuild
        Projects="@(_MSBuildProjectReferenceExistent)"
        Targets="$(_RecursiveTargetForContentCopying)"
        BuildInParallel="$(BuildInParallel)"
        Properties="%(_MSBuildProjectReferenceExistent.SetConfiguration); %(_MSBuildProjectReferenceExistent.SetPlatform); %(_MSBuildProjectReferenceExistent.SetTargetFramework)"
        Condition="'@(_MSBuildProjectReferenceExistent)' != '' and '$(_GetChildProjectCopyToOutputDirectoryItems)' == 'true' and '%(_MSBuildProjectReferenceExistent.Private)' != 'false' and '$(UseCommonOutputDirectory)' != 'true'"
        ContinueOnError="$(ContinueOnError)"
        SkipNonexistentTargets="true"
        RemoveProperties="%(_MSBuildProjectReferenceExistent.GlobalPropertiesToRemove)">

</MSBuild>

<ItemGroup>
      <_TransitiveItemsToCopyToOutputDirectory   KeepDuplicates=" '$(_GCTODIKeepDuplicates)' != 'false' " KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(_AllChildProjectItemsWithTargetPath->'%(FullPath)')" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='Always'"/>
      <_TransitiveItemsToCopyToOutputDirectory   KeepDuplicates=" '$(_GCTODIKeepDuplicates)' != 'false' " KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(_AllChildProjectItemsWithTargetPath->'%(FullPath)')" Condition="'%(_AllChildProjectItemsWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest'"/>
    </ItemGroup>

<ItemGroup>
      <_AllChildProjectItemsWithTargetPath       Remove="@(_AllChildProjectItemsWithTargetPath)"/>
    </ItemGroup>

<ItemGroup>
      <_TransitiveItemsToCopyToOutputDirectory       KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(ContentWithTargetPath->'%(FullPath)')" Condition="'%(ContentWithTargetPath.CopyToOutputDirectory)'=='Always' AND '%(ContentWithTargetPath.MSBuildSourceProjectFile)'!=''"/>
      <_TransitiveItemsToCopyToOutputDirectory       KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(ContentWithTargetPath->'%(FullPath)')" Condition="'%(ContentWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest' AND '%(ContentWithTargetPath.MSBuildSourceProjectFile)'!=''"/>
    </ItemGroup>

<ItemGroup>
      <_TransitiveItemsToCopyToOutputDirectory       KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(EmbeddedResource->'%(FullPath)')" Condition="'%(EmbeddedResource.CopyToOutputDirectory)'=='Always' AND '%(EmbeddedResource.MSBuildSourceProjectFile)'!=''"/>
      <_TransitiveItemsToCopyToOutputDirectory       KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(EmbeddedResource->'%(FullPath)')" Condition="'%(EmbeddedResource.CopyToOutputDirectory)'=='PreserveNewest' AND '%(EmbeddedResource.MSBuildSourceProjectFile)'!=''"/>
    </ItemGroup>

<ItemGroup>
      <_CompileItemsToCopy Include="@(Compile->'%(FullPath)')" Condition="('%(Compile.CopyToOutputDirectory)'=='Always' or '%(Compile.CopyToOutputDirectory)'=='PreserveNewest') AND '%(Compile.MSBuildSourceProjectFile)'!=''"/>
    </ItemGroup>

<ItemGroup>
      <_TransitiveItemsToCopyToOutputDirectory       KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(_NoneWithTargetPath->'%(FullPath)')" Condition="'%(_NoneWithTargetPath.CopyToOutputDirectory)'=='Always' AND '%(_NoneWithTargetPath.MSBuildSourceProjectFile)'!=''"/>
      <_TransitiveItemsToCopyToOutputDirectory       KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(_NoneWithTargetPath->'%(FullPath)')" Condition="'%(_NoneWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest' AND '%(_NoneWithTargetPath.MSBuildSourceProjectFile)'!=''"/>
    </ItemGroup>

</Target>

<ItemGroup>
      <_ThisProjectItemsToCopyToOutputDirectory       KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(ContentWithTargetPath->'%(FullPath)')" Condition="'%(ContentWithTargetPath.CopyToOutputDirectory)'=='Always' AND '%(ContentWithTargetPath.MSBuildSourceProjectFile)'==''"/>
      <_ThisProjectItemsToCopyToOutputDirectory       KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(ContentWithTargetPath->'%(FullPath)')" Condition="'%(ContentWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest' AND '%(ContentWithTargetPath.MSBuildSourceProjectFile)'==''"/>
    </ItemGroup>

<ItemGroup>
      <_ThisProjectItemsToCopyToOutputDirectory       KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(EmbeddedResource->'%(FullPath)')" Condition="'%(EmbeddedResource.CopyToOutputDirectory)'=='Always' AND '%(EmbeddedResource.MSBuildSourceProjectFile)'==''"/>
      <_ThisProjectItemsToCopyToOutputDirectory       KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(EmbeddedResource->'%(FullPath)')" Condition="'%(EmbeddedResource.CopyToOutputDirectory)'=='PreserveNewest' AND '%(EmbeddedResource.MSBuildSourceProjectFile)'==''"/>
    </ItemGroup>

<ItemGroup>
      <_ThisProjectItemsToCopyToOutputDirectory       KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(_NoneWithTargetPath->'%(FullPath)')" Condition="'%(_NoneWithTargetPath.CopyToOutputDirectory)'=='Always' AND '%(_NoneWithTargetPath.MSBuildSourceProjectFile)'==''"/>
      <_ThisProjectItemsToCopyToOutputDirectory       KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(_NoneWithTargetPath->'%(FullPath)')" Condition="'%(_NoneWithTargetPath.CopyToOutputDirectory)'=='PreserveNewest' AND '%(_NoneWithTargetPath.MSBuildSourceProjectFile)'==''"/>
    </ItemGroup>

</Target>

<CallTarget Targets="_GetCopyToOutputDirectoryItemsFromTransitiveProjectReferences">
      <Output TaskParameter="TargetOutputs" ItemName="_TransitiveItemsToCopyToOutputDirectory" />
    </CallTarget>

<ItemGroup>
      <_TransitiveItemsToCopyToOutputDirectoryAlways               KeepDuplicates=" '$(_GCTODIKeepDuplicates)' != 'false' " KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(_TransitiveItemsToCopyToOutputDirectory->'%(FullPath)')" Condition="'%(_TransitiveItemsToCopyToOutputDirectory.CopyToOutputDirectory)'=='Always'"/>
      <_TransitiveItemsToCopyToOutputDirectoryPreserveNewest       KeepDuplicates=" '$(_GCTODIKeepDuplicates)' != 'false' " KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(_TransitiveItemsToCopyToOutputDirectory->'%(FullPath)')" Condition="'%(_TransitiveItemsToCopyToOutputDirectory.CopyToOutputDirectory)'=='PreserveNewest'"/>

<_ThisProjectItemsToCopyToOutputDirectoryAlways              KeepDuplicates=" '$(_GCTODIKeepDuplicates)' != 'false' " KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(_ThisProjectItemsToCopyToOutputDirectory->'%(FullPath)')" Condition="'%(_ThisProjectItemsToCopyToOutputDirectory.CopyToOutputDirectory)'=='Always'"/>
      <_ThisProjectItemsToCopyToOutputDirectoryPreserveNewest      KeepDuplicates=" '$(_GCTODIKeepDuplicates)' != 'false' " KeepMetadata="$(_GCTODIKeepMetadata)" Include="@(_ThisProjectItemsToCopyToOutputDirectory->'%(FullPath)')" Condition="'%(_ThisProjectItemsToCopyToOutputDirectory.CopyToOutputDirectory)'=='PreserveNewest'"/>

<_SourceItemsToCopyToOutputDirectoryAlways                   Include="@(_TransitiveItemsToCopyToOutputDirectoryAlways);@(_ThisProjectItemsToCopyToOutputDirectoryAlways)"/>
      <_SourceItemsToCopyToOutputDirectory                         Include="@(_TransitiveItemsToCopyToOutputDirectoryPreserveNewest);@(_ThisProjectItemsToCopyToOutputDirectoryPreserveNewest)"/>

<AllItemsFullPathWithTargetPath                              Include="@(_SourceItemsToCopyToOutputDirectoryAlways->'%(FullPath)');@(_SourceItemsToCopyToOutputDirectory->'%(FullPath)')"/>

<_TransitiveItemsToCopyToOutputDirectoryAlways               Remove="@(_TransitiveItemsToCopyToOutputDirectoryAlways)"/>
      <_TransitiveItemsToCopyToOutputDirectoryPreserveNewest       Remove="@(_TransitiveItemsToCopyToOutputDirectoryPreserveNewest)"/>
      <_TransitiveItemsToCopyToOutputDirectory                     Remove="@(_TransitiveItemsToCopyToOutputDirectory)"/>

<_ThisProjectItemsToCopyToOutputDirectoryAlways              Remove="@(_ThisProjectItemsToCopyToOutputDirectoryAlways)"/>
      <_ThisProjectItemsToCopyToOutputDirectoryPreserveNewest      Remove="@(_ThisProjectItemsToCopyToOutputDirectoryPreserveNewest)"/>
      <_ThisProjectItemsToCopyToOutputDirectory                    Remove="@(_ThisProjectItemsToCopyToOutputDirectory)"/>
    </ItemGroup>

</Target>

<!--
    ============================================================
                                        GetCopyToPublishDirectoryItems

Default implementation of GetCopyToPublishDirectoryItems for projects that do not
    use Microsoft.NET.Sdk. It simply returns whatever GetCopyToOutputDirectoryItems
    does with CopyToPublishDirectory implied  by CopyToOutputDirectory, which is the
    same as Microsoft.NET.Sdk default when its CopyToPublishDirectory is not used.

Microsoft.NET.Sdk projects  will override this to allow the publish output to be
    customized independently from the build output.

Having a default implementation here allows the Microsoft.NET.Sdk Publish target
    to work when a Microsoft.NET.Sdk-based project references a non-Microsoft.NET.Sdk-based
    project.
    ============================================================
    -->
    <Target
      Name="GetCopyToPublishDirectoryItems"
      DependsOnTargets="GetCopyToOutputDirectoryItems"
      Returns="@(AllPublishItemsFullPathWithTargetPath)">

<ItemGroup>
      <AllPublishItemsFullPathWithTargetPath Include="@(AllItemsFullPathWithTargetPath)">
        <CopyToPublishDirectory>%(CopyToOutputDirectory)</CopyToPublishDirectory>
      </AllPublishItemsFullPathWithTargetPath>
    </ItemGroup>
  </Target>

<!--
    ============================================================
                                        _CopyOutOfDateSourceItemsToOutputDirectory

Copy files that have the CopyToOutputDirectory attribute set to 'PreserveNewest'.
    ============================================================
    -->
  <Target
      Name="_CopyOutOfDateSourceItemsToOutputDirectory"
      Condition=" '@(_SourceItemsToCopyToOutputDirectory)' != '' "
      Inputs="@(_SourceItemsToCopyToOutputDirectory)"
      Outputs="@(_SourceItemsToCopyToOutputDirectory->'$(OutDir)%(TargetPath)')">

<Copy
        SourceFiles = "@(_SourceItemsToCopyToOutputDirectory)"
        DestinationFiles = "@(_SourceItemsToCopyToOutputDirectory->'$(OutDir)%(TargetPath)')"
        OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
        Retries="$(CopyRetryCount)"
        RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
        UseHardlinksIfPossible="$(CreateHardLinksForAdditionalFilesIfPossible)"
        UseSymboliclinksIfPossible="$(CreateSymbolicLinksForAdditionalFilesIfPossible)"
            >

</Copy>

</Target>

<!--
    ============================================================
                                        _CopyOutOfDateSourceItemsToOutputDirectoryAlways

Copy files that have the CopyToOutputDirectory attribute set to 'Always'.
    ============================================================
    -->
  <Target
      Name="_CopyOutOfDateSourceItemsToOutputDirectoryAlways"
      Condition=" '@(_SourceItemsToCopyToOutputDirectoryAlways)' != '' ">

<Copy
        SourceFiles = "@(_SourceItemsToCopyToOutputDirectoryAlways)"
        DestinationFiles = "@(_SourceItemsToCopyToOutputDirectoryAlways->'$(OutDir)%(TargetPath)')"
        OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
        Retries="$(CopyRetryCount)"
        RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
        UseHardlinksIfPossible="$(CreateHardLinksForAdditionalFilesIfPossible)"
        UseSymboliclinksIfPossible="$(CreateSymbolicLinksForAdditionalFilesIfPossible)"
            >

</Copy>

</Target>

<!--
    ============================================================
                                        _CopyAppConfigFile

Copy the application config file.
    ============================================================
    -->
  <Target
      Name="_CopyAppConfigFile"
      Condition=" '@(AppConfigWithTargetPath)' != '' "
      Inputs="@(AppConfigWithTargetPath)"
      Outputs="@(AppConfigWithTargetPath->'$(OutDir)%(TargetPath)')">

<Copy
        SourceFiles="@(AppConfigWithTargetPath)"
        DestinationFiles="@(AppConfigWithTargetPath->'$(OutDir)%(TargetPath)')"
        OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
        Retries="$(CopyRetryCount)"
        RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
        UseHardlinksIfPossible="$(CreateHardLinksForAdditionalFilesIfPossible)"
        UseSymboliclinksIfPossible="$(CreateSymbolicLinksForAdditionalFilesIfPossible)"
            >

</Copy>

</Target>

<!--
    ================================================================
                                         _CopyManifestFiles
    ================================================================

Copy the built manifests (.exe.manifest, .application/.xbap) to the final directory.
    -->
  <Target
      Name="_CopyManifestFiles"
      Condition=" '$(_DeploymentCopyApplicationManifest)'=='true' or '$(GenerateClickOnceManifests)'=='true' "
      DependsOnTargets="PrepareForBuild">

</Copy>

<Message Importance="Normal" Condition="'$(_DeploymentCopyApplicationManifest)'=='true'" Text="$(MSBuildProjectName) -&gt; @(_DeploymentMainApplicationManifest->'%(FullPath)')" />

</Copy>

<Message Importance="Normal" Condition="'$(GenerateClickOnceManifests)'=='true'" Text="$(MSBuildProjectName) -&gt; @(_DeploymentMainDeployManifest->'%(FullPath)')" />

</Target>

<!--
    ================================================================
                                         _CheckForCompileOutputs

Checks each file output from the main "Compile" target to make sure they really exist.
    If they do, then record them in the clean cache.
    ============================================================
    -->
  <Target
      Name="_CheckForCompileOutputs">

<ItemGroup>
      <FileWrites Include="@(IntermediateAssembly)" Condition="Exists('@(IntermediateAssembly)')"/>
      <FileWrites Include="@(IntermediateRefAssembly)" Condition="'$(ProduceReferenceAssembly)' == 'true' and Exists('@(IntermediateRefAssembly)')"/>
    </ItemGroup>

<PropertyGroup>
      <_DocumentationFileProduced Condition="!Exists('@(DocFileItem)')">false</_DocumentationFileProduced>
    </PropertyGroup>

<PropertyGroup>
      <_DebugSymbolsProduced Condition="!Exists('@(_DebugSymbolsIntermediatePath)')">false</_DebugSymbolsProduced>
    </PropertyGroup>

<!--
    ============================================================
                                        _SGenCheckForOutputs

Checks each file output from the "GenerateSerializationAssemblies" target to make sure they really exist.
    If they do, then record them in the clean cache.
    ============================================================
    -->
  <Target
      Name="_SGenCheckForOutputs"
      Condition="'$(_SGenGenerateSerializationAssembliesConfig)' == 'On' or ('@(WebReferenceUrl)'!='' and '$(_SGenGenerateSerializationAssembliesConfig)' == 'Auto')"
        >

<PropertyGroup>
      <_SGenDllCreated Condition="Exists('$(IntermediateOutputPath)$(_SGenDllName)')">true</_SGenDllCreated>
    </PropertyGroup>

</Target>

<!--
    ============================================================
                                        UnmanagedRegistration

Registers the main assembly for COM interop.
    ============================================================
    -->
  <PropertyGroup>
    <UnmanagedRegistrationDependsOn></UnmanagedRegistrationDependsOn>
  </PropertyGroup>
  <Target
      Name="UnmanagedRegistration"
      Condition="'$(RegisterForComInterop)'=='true' and '$(OutputType)'=='library'"
      DependsOnTargets="$(UnmanagedRegistrationDependsOn)"
        >

<PropertyGroup>
      <RegisterAssemblyMSBuildArchitecture Condition="'$(RegisterAssemblyMSBuildArchitecture)' == ''">$(PlatformTargetAsMSBuildArchitecture)</RegisterAssemblyMSBuildArchitecture>
    </PropertyGroup>

<PropertyGroup Condition="'$(TargetFrameworkAsMSBuildRuntime)' != '' and '$(RegisterAssemblyMSBuildArchitecture)' != ''">
      
      <RegisterAssemblyMSBuildRuntime
          Condition="'$(RegisterAssemblyMSBuildRuntime)' == '' and
                     $([MSBuild]::DoesTaskHostExist(`$(TargetFrameworkAsMSBuildRuntime)`, `$(RegisterAssemblyMSBuildArchitecture)`))">$(TargetFrameworkAsMSBuildRuntime)</RegisterAssemblyMSBuildRuntime>

<RegisterAssemblyMSBuildRuntime Condition="'$(RegisterAssemblyMSBuildRuntime)' == ''">CurrentRuntime</RegisterAssemblyMSBuildRuntime>
    </PropertyGroup>

<RegisterAssembly
        Assemblies="@(_OutputPathItem->'%(FullPath)$(TargetFileName)')"
        TypeLibFiles="@(_OutputPathItem->'%(FullPath)$(TargetName).tlb')"
        AssemblyListFile="@(_UnmanagedRegistrationCache)"
        CreateCodeBase="true"
        MSBuildRuntime="$(RegisterAssemblyMSBuildRuntime)"
        MSBuildArchitecture="$(RegisterAssemblyMSBuildArchitecture)"
        Condition="!Exists('@(_UnmanagedRegistrationCache)')"/>

<ItemGroup>
      <FileWrites Include="@(_OutputPathItem->'%(FullPath)$(TargetName).tlb')"/>
    </ItemGroup>
  </Target>

<!--
    ============================================================
                                        IncrementalClean

Remove files that were produced in a prior build but weren't produced in the current build.
    The reason is that if, for example, the name of the .exe has changed we want to delete the
    old copy.

Leave the Clean cache file containing only the files produced in the current build.
    ============================================================
    -->
  <Target
       Name="IncrementalClean"
       DependsOnTargets="_CleanGetCurrentAndPriorFileWrites">

<ItemGroup>
      <_CleanOrphanFileWrites Include="@(_CleanPriorFileWrites)" Exclude="@(_CleanCurrentFileWrites)"/>
    </ItemGroup>

<FindUnderPath Path="$(OutDir)" Files="@(_CleanOrphanFileWrites)">
      <Output TaskParameter="InPath" ItemName="_CleanOrphanFileWritesInOutput"/>
    </FindUnderPath>

<FindUnderPath Path="$(IntermediateOutputPath)"    Files="@(_CleanOrphanFileWrites)">
      <Output TaskParameter="InPath" ItemName="_CleanOrphanFileWritesInIntermediate"/>
    </FindUnderPath>

<Delete
        Files="@(_CleanOrphanFileWritesInIntermediate);@(_CleanOrphanFileWritesInOutput)"
        TreatErrorsAsWarnings="true">

</Delete>

<ItemGroup>
      <_CleanRemainingFileWritesAfterIncrementalClean Include="@(_CleanPriorFileWrites);@(_CleanCurrentFileWrites)" Exclude="@(_CleanOrphanFilesDeleted)"/>
    </ItemGroup>

<RemoveDuplicates Inputs="@(_CleanRemainingFileWritesAfterIncrementalClean)">
      <Output TaskParameter="Filtered" ItemName="_CleanUniqueRemainingFileWritesAfterIncrementalClean"/>
    </RemoveDuplicates>

<WriteLinesToFile
        File="$(IntermediateOutputPath)$(CleanFile)"
        Lines="@(_CleanUniqueRemainingFileWritesAfterIncrementalClean)"
        Condition="'@(_CleanUnfilteredPriorFileWrites)'!='@(_CleanUniqueRemainingFileWritesAfterIncrementalClean)'"
        Overwrite="true"/>

</Target>

<!--
    ============================================================
                                        _CleanGetCurrentAndPriorFileWrites

Get the list of files built in the current build and in prior builds.
    ============================================================
    -->
  <Target
       Name="_CleanGetCurrentAndPriorFileWrites"
       DependsOnTargets="_CheckForCompileOutputs;_SGenCheckForOutputs">

<ReadLinesFromFile File="$(IntermediateOutputPath)$(CleanFile)">
      <Output TaskParameter="Lines" ItemName="_CleanUnfilteredPriorFileWrites"/>
    </ReadLinesFromFile>

<ConvertToAbsolutePath Paths="@(_ResolveAssemblyReferenceResolvedFiles)">
      <Output TaskParameter="AbsolutePaths" ItemName="_ResolveAssemblyReferenceResolvedFilesAbsolute"/>
    </ConvertToAbsolutePath>

<ItemGroup>
      <_CleanPriorFileWrites Include="@(_CleanUnfilteredPriorFileWrites)" Exclude="@(_ResolveAssemblyReferenceResolvedFilesAbsolute)"/>
    </ItemGroup>

<!--
        Of shareable files, keep only those that are in the project's directory.
        We never clean shareable files outside of the project directory because
        the build may be to a common output directory and other projects may need
        them.

Only subtract the outputs from ResolveAssemblyReferences target because that's the
        only "Resolve" target that tries to resolve assemblies directly from the output
        directory.
        -->
    <FindUnderPath Path="$(MSBuildProjectDirectory)" Files="@(FileWritesShareable)" UpdateToAbsolutePaths="true">
      <Output TaskParameter="InPath" ItemName="FileWrites"/>
    </FindUnderPath>

<FindUnderPath Path="$(OutDir)" Files="@(FileWrites)" UpdateToAbsolutePaths="true">
      <Output TaskParameter="InPath" ItemName="_CleanCurrentFileWritesInOutput"/>
    </FindUnderPath>

<FindUnderPath Path="$(IntermediateOutputPath)" Files="@(FileWrites)" UpdateToAbsolutePaths="true">
      <Output TaskParameter="InPath" ItemName="_CleanCurrentFileWritesInIntermediate"/>
    </FindUnderPath>

<!--
        Subtract any resolved assembly files from *current* file writes because deleting
        these would break subsequent builds because the assemblies would be unresolvable.

Only subtract the outputs from ResolveAssemblyReferences target because that's the
        only "Resolve" target that tries to resolve assemblies directly from the output
        directory.
         -->
    <ItemGroup>
      <_CleanCurrentFileWritesWithNoReferences Include="@(_CleanCurrentFileWritesInOutput);@(_CleanCurrentFileWritesInIntermediate)" Exclude="@(_ResolveAssemblyReferenceResolvedFilesAbsolute)"/>
    </ItemGroup>

<RemoveDuplicates Inputs="@(_CleanCurrentFileWritesWithNoReferences)" >
      <Output TaskParameter="Filtered" ItemName="_CleanCurrentFileWrites"/>
    </RemoveDuplicates>

</Target>

<!--
    ============================================================
                                        Clean

Delete all intermediate and final build outputs.
    ============================================================
    -->
  <PropertyGroup>
    <CleanDependsOn>
      BeforeClean;
      UnmanagedUnregistration;
      CoreClean;
      CleanReferencedProjects;
      CleanPublishFolder;
      AfterClean
    </CleanDependsOn>
  </PropertyGroup>

<!--
    ============================================================
                                        BeforeClean

Redefine this target in your project in order to run tasks just before Clean.
    ============================================================
    -->
  <Target Name="BeforeClean"/>

<!--
    ============================================================
                                        AfterClean

Redefine this target in your project in order to run tasks just after Clean.
    ============================================================
    -->
  <Target Name="AfterClean"/>

<!--
    ============================================================
                                        CleanReferencedProjects

Call Clean target on all Referenced Projects.
    ============================================================
    -->
  <Target
      Name="CleanReferencedProjects"
      DependsOnTargets="PrepareProjectReferences">

<MSBuild
        Projects="@(_MSBuildProjectReferenceExistent)"
        Targets="Clean"
        Properties="%(_MSBuildProjectReferenceExistent.SetConfiguration); %(_MSBuildProjectReferenceExistent.SetPlatform); %(_MSBuildProjectReferenceExistent.SetTargetFramework)"
        BuildInParallel="$(BuildInParallel)"
        Condition="'$(BuildingInsideVisualStudio)' != 'true' and '$(BuildProjectReferences)' == 'true' and '@(_MSBuildProjectReferenceExistent)' != ''"
        ContinueOnError="$(ContinueOnError)"
        RemoveProperties="%(_MSBuildProjectReferenceExistent.GlobalPropertiesToRemove)"/>

</Target>

<PropertyGroup>
    <CoreCleanDependsOn></CoreCleanDependsOn>
  </PropertyGroup>
  <Target
      Name="CoreClean"
      DependsOnTargets="$(CoreCleanDependsOn)">

<Delete
        Files="@(Clean)"
        TreatErrorsAsWarnings="true"/>

<ReadLinesFromFile File="$(IntermediateOutputPath)$(CleanFile)">
      <Output TaskParameter="Lines" ItemName="_CleanPriorFileWrites"/>
    </ReadLinesFromFile>

<FindUnderPath Path="$(OutDir)" Files="@(_CleanPriorFileWrites)">
      <Output TaskParameter="InPath" ItemName="_CleanPriorFileWritesInOutput"/>
    </FindUnderPath>

<FindUnderPath Path="$(IntermediateOutputPath)"    Files="@(_CleanPriorFileWrites)">
      <Output TaskParameter="InPath" ItemName="_CleanPriorFileWritesInIntermediate"/>
    </FindUnderPath>

<Delete
        Files="@(_CleanPriorFileWritesInOutput);@(_CleanPriorFileWritesInIntermediate)"
        TreatErrorsAsWarnings="true">

</Delete>

<ItemGroup>
      <_CleanRemainingFileWritesAfterClean Include="@(_CleanPriorFileWrites)" Exclude="@(_CleanPriorFileWritesDeleted)"/>
    </ItemGroup>

<RemoveDuplicates Inputs="@(_CleanRemainingFileWritesAfterClean)">
      <Output TaskParameter="Filtered" ItemName="_CleanUniqueRemainingFileWrites"/>
    </RemoveDuplicates>

<MakeDir Directories="$(IntermediateOutputPath)"/>

<WriteLinesToFile File="$(IntermediateOutputPath)$(CleanFile)" Lines="@(_CleanUniqueRemainingFileWrites)" Overwrite="true" />

</Target>

<!--
    ============================================================
                                        _CleanRecordFileWrites

Save the list of all files written to disk so that it can be used for "Clean" later.

Files written in prior builds are not removed from Clean cache.
    ============================================================
    -->
  <Target
       Name="_CleanRecordFileWrites"
       DependsOnTargets="_CleanGetCurrentAndPriorFileWrites">

<RemoveDuplicates Inputs="@(_CleanPriorFileWrites);@(_CleanCurrentFileWrites)">
      <Output TaskParameter="Filtered" ItemName="_CleanUniqueFileWrites"/>
    </RemoveDuplicates>

<MakeDir Directories="$(IntermediateOutputPath)"/>

<WriteLinesToFile
        File="$(IntermediateOutputPath)$(CleanFile)"
        Lines="@(_CleanUniqueFileWrites)"
        Overwrite="true" />

</Target>

<Target
      Name="CleanPublishFolder">

</Target>

<!--
    ============================================================
                                        PostBuildEvent

Run the post-build event. This step is driven by two parameters:

(1) The $(RunPostBuildEvent) property is set by the user through the IDE and can be one of four values.

- OnBuildSuccess: In this case, every step of the build must succeed for the post-build step to run.
        - <Blank>: This is the same as OnBuildSuccess.
        - OnOutputUpdated: In this case, the post-build step will run only if the main output assembly was
        actually updated.
        - Always: The post-build step is always run.

(2) The $(_AssemblyTimestampBeforeCompile) and $(_AssemblyTimestampAfterCompile) values are
        set by the _TimeStampBeforeCompile and _TimeStampAfterCompile targets.  If the assembly was actually
        rebuilt during this build, then the two values will be different.
    ============================================================
    -->
  <PropertyGroup>
    <PostBuildEventDependsOn></PostBuildEventDependsOn>
  </PropertyGroup>
  <Target
      Name="PostBuildEvent"
      Condition="'$(PostBuildEvent)' != '' and ('$(RunPostBuildEvent)' != 'OnOutputUpdated' or '$(_AssemblyTimestampBeforeCompile)' != '$(_AssemblyTimestampAfterCompile)')"
      DependsOnTargets="$(PostBuildEventDependsOn)">

</Target>

<!--
    ============================================================
                                        Publish

This target is only called when doing ClickOnce publishing outside the IDE, which implicitly builds before publishing.
    ============================================================
    -->
  <PropertyGroup>
    <PublishDependsOn Condition="'$(PublishableProject)'=='true'">
      SetGenerateManifests;
      Build;
      PublishOnly
    </PublishDependsOn>
    <PublishDependsOn Condition="'$(PublishableProject)'!='true'">
      _DeploymentUnpublishable
    </PublishDependsOn>
  </PropertyGroup>
  <Target
      Name="Publish"
      DependsOnTargets="$(PublishDependsOn)"/>

<!--
    ============================================================
                                        _DeploymentUnpublishable

This target is used to block an attempt to ClickOnce publish a non-publishable project, such as a ClassLibrary, when building outside the IDE.
    ============================================================
    -->
  <Target
      Name="_DeploymentUnpublishable">

</Target>

<!--
    ============================================================
                                        SetGenerateManifests

This target simply assures the GenerateClickOnceManifests property is set whenever the publish target is invoked.
    ============================================================
    -->
  <Target
      Name="SetGenerateManifests">

</Target>

<!--
    ============================================================
                                        PublishOnly

The "PublishOnly" target is intended for ClickOnce publishing inside the IDE, where the build has already been done
    by the BuildManager.
    ============================================================
    -->
  <PropertyGroup>
    <PublishOnlyDependsOn>
      SetGenerateManifests;
      PublishBuild;
      BeforePublish;
      GenerateManifests;
      CopyFilesToOutputDirectory;
      _CopyFilesToPublishFolder;
      _DeploymentGenerateBootstrapper;
      ResolveKeySource;
      _DeploymentSignClickOnceDeployment;
      AfterPublish
    </PublishOnlyDependsOn>
  </PropertyGroup>
  <Target
      Name="PublishOnly"
      DependsOnTargets="$(PublishOnlyDependsOn)"/>

<!--
    ============================================================
                                        BeforePublish

Redefine this target in your project in order to run tasks just before Publish.
    ============================================================
    -->
  <Target Name="BeforePublish"/>

<!--
    ============================================================
                                        AfterPublish

Redefine this target in your project in order to run tasks just after Publish.
    ============================================================
    -->
  <Target Name="AfterPublish"/>

<!--
    ============================================================
                                        PublishBuild

Defines the set of targets that publishing is directly dependent on.
    ============================================================
    -->
  <PropertyGroup>
    <PublishBuildDependsOn>
      BuildOnlySettings;
      PrepareForBuild;
      ResolveReferences;
      PrepareResources;
      ResolveKeySource;
      GenerateSerializationAssemblies;
      CreateSatelliteAssemblies;
    </PublishBuildDependsOn>
  </PropertyGroup>
  <Target
      Name="PublishBuild"
      DependsOnTargets="$(PublishBuildDependsOn)"/>

<Target
      Name="_CopyFilesToPublishFolder">

<FormatVersion Version="$(ApplicationVersion)" Revision="$(ApplicationRevision)" FormatType="Path">
      <Output TaskParameter="OutputVersion" PropertyName="_DeploymentApplicationVersionFragment"/>
    </FormatVersion>

<PropertyGroup>
      <_DeploymentApplicationFolderName>Application Files\$(AssemblyName)_$(_DeploymentApplicationVersionFragment)</_DeploymentApplicationFolderName>
      <_DeploymentApplicationDir>$(PublishDir)$(_DeploymentApplicationFolderName)\</_DeploymentApplicationDir>
    </PropertyGroup>

<PropertyGroup>
      
      <CreateHardLinksForPublishFilesIfPossible Condition="'$(BuildingInsideVisualStudio)' == 'true' or '$(CreateHardLinksForPublishFilesIfPossible)' == ''">false</CreateHardLinksForPublishFilesIfPossible>
      <CreateSymbolicLinksForPublishFilesIfPossible Condition="'$(BuildingInsideVisualStudio)' == 'true' or '$(CreateSymbolicLinksForPublishFilesIfPossible)' == ''">false</CreateSymbolicLinksForPublishFilesIfPossible>
    </PropertyGroup>

<Copy
        SourceFiles=
                "@(_ApplicationManifestFinal);
                @(_DeploymentResolvedManifestEntryPoint);
                @(_DeploymentManifestFiles);
                @(ReferenceComWrappersToCopyLocal);
                @(ResolvedIsolatedComModules);
                @(_DeploymentLooseManifestFile)"
        DestinationFiles=
                "@(_ApplicationManifestFinal->'$(_DeploymentApplicationDir)%(TargetPath)');
                @(_DeploymentManifestEntryPoint->'$(_DeploymentApplicationDir)%(TargetPath)$(_DeploymentFileMappingExtension)');
                @(_DeploymentManifestFiles->'$(_DeploymentApplicationDir)%(TargetPath)$(_DeploymentFileMappingExtension)');
                @(ReferenceComWrappersToCopyLocal->'$(_DeploymentApplicationDir)%(FileName)%(Extension)$(_DeploymentFileMappingExtension)');
                @(ResolvedIsolatedComModules->'$(_DeploymentApplicationDir)%(FileName)%(Extension)$(_DeploymentFileMappingExtension)');
                @(_DeploymentLooseManifestFile->'$(_DeploymentApplicationDir)%(FileName)%(Extension)$(_DeploymentFileMappingExtension)')"
        SkipUnchangedFiles="$(SkipCopyUnchangedFiles)"
        OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
        Retries="$(CopyRetryCount)"
        UseHardlinksIfPossible="$(CreateHardLinksForPublishFilesIfPossible)"
        UseSymboliclinksIfPossible="$(CreateSymbolicLinksForPublishFilesIfPossible)"
        RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"/>

<Copy
        SourceFiles="@(_DeploymentManifestDependencies)"
        DestinationFiles="@(_DeploymentManifestDependencies->'$(_DeploymentApplicationDir)%(TargetPath)$(_DeploymentFileMappingExtension)')"
        SkipUnchangedFiles="$(SkipCopyUnchangedFiles)"
        OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
        Retries="$(CopyRetryCount)"
        RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
        UseHardlinksIfPossible="$(CreateHardLinksForPublishFilesIfPossible)"
        UseSymboliclinksIfPossible="$(CreateSymbolicLinksForPublishFilesIfPossible)"
        Condition="'%(_DeploymentManifestDependencies.DependencyType)'=='Install'"/>

<Copy
        SourceFiles="@(_ReferenceScatterPaths)"
        DestinationFiles="@(_ReferenceScatterPaths->'$(_DeploymentApplicationDir)%(Filename)%(Extension)$(_DeploymentFileMappingExtension)')"
        SkipUnchangedFiles="$(SkipCopyUnchangedFiles)"
        OverwriteReadOnlyFiles="$(OverwriteReadOnlyFiles)"
        Retries="$(CopyRetryCount)"
        RetryDelayMilliseconds="$(CopyRetryDelayMilliseconds)"
        UseHardlinksIfPossible="$(CreateHardLinksForPublishFilesIfPossible)"
        UseSymboliclinksIfPossible="$(CreateSymbolicLinksForPublishFilesIfPossible)"
            />

</Target>

<Target
      Name="_DeploymentGenerateBootstrapper">

<GenerateBootstrapper
        ApplicationFile="$(TargetDeployManifestFileName)"
        ApplicationName="$(AssemblyName)"
        ApplicationUrl="$(_DeploymentFormattedApplicationUrl)"
        BootstrapperItems="@(BootstrapperPackage)"
        ComponentsLocation="$(BootstrapperComponentsLocation)"
        ComponentsUrl="$(_DeploymentFormattedComponentsUrl)"
        Culture="$(TargetCulture)"
        FallbackCulture="$(FallbackCulture)"
        OutputPath="$(PublishDir)"
        SupportUrl="$(_DeploymentFormattedSupportUrl)"
        Path="$(GenerateBootstrapperSdkPath)"
        VisualStudioVersion="$(VisualStudioVersion)"
        Condition="'$(BootstrapperEnabled)'=='true'"/>

</Target>

<Target
      Name="_DeploymentSignClickOnceDeployment">

<SignFile
        CertificateThumbprint="$(_DeploymentResolvedManifestCertificateThumbprint)"
        TimestampUrl="$(ManifestTimestampUrl)"
        SigningTarget="$(_DeploymentApplicationDir)$(_DeploymentTargetApplicationManifestFileName)"
        TargetFrameworkVersion="$(TargetFrameworkVersion)"
        Condition="'$(_DeploymentSignClickOnceManifests)'=='true'" />

<UpdateManifest
        ApplicationPath="$(_DeploymentApplicationFolderName)\$(_DeploymentTargetApplicationManifestFileName)"
        TargetFrameworkVersion="$(TargetFrameworkVersion)"
        ApplicationManifest="$(_DeploymentApplicationDir)$(_DeploymentTargetApplicationManifestFileName)"
        InputManifest="$(OutDir)$(TargetDeployManifestFileName)"
        OutputManifest="$(PublishDir)$(TargetDeployManifestFileName)">

</UpdateManifest>

</Target>

<!--
    ============================================================
                                        AllProjectOutputGroups

The targets below drive output groups, which provide generic information about a
    project's inputs (e.g., content files, compilation sources, etc.) and built outputs
    (e.g., built EXE/DLL, PDB, XML documentation files, etc.)

Each target may produce two kinds of items:  outputs and dependencies.  Outputs are
    items from the current project; dependencies are items that are brought into the
    current project as a result of referencing other projects or components.

For both outputs and dependencies, the Include attribute
    specifies the location of the output/dependency; it must be a full path.  Any number
    of additional attributes may be placed on an output/dependency item.
    ============================================================
    -->
  <Target
      Name="AllProjectOutputGroups"
      DependsOnTargets="
            BuiltProjectOutputGroup;
            DebugSymbolsProjectOutputGroup;
            DocumentationProjectOutputGroup;
            SatelliteDllsProjectOutputGroup;
            SourceFilesProjectOutputGroup;
            ContentFilesProjectOutputGroup;
            SGenFilesOutputGroup"/>

<ItemGroup Condition=" '$(OutputType)' != 'winmdobj' ">
    <BuiltProjectOutputGroupKeyOutput Include="@(IntermediateAssembly->'%(FullPath)')">
      <IsKeyOutput>true</IsKeyOutput>
      <FinalOutputPath>$(TargetPath)</FinalOutputPath>
      <TargetPath>$(TargetFileName)</TargetPath>
      <COM2REG Condition="'$(RegisterForComInterop)'=='true' and '$(OutputType)'=='library'">true</COM2REG>
    </BuiltProjectOutputGroupKeyOutput>
  </ItemGroup>

<ItemGroup Condition=" '$(OutputType)' == 'winmdobj' ">
    <WinMDExpOutputWindowsMetadataFileItem Include="$(_IntermediateWindowsMetadataPath)" Condition="'$(_IntermediateWindowsMetadataPath)' != ''" />
    <BuiltProjectOutputGroupKeyOutput Include="@(WinMDExpOutputWindowsMetadataFileItem->'%(FullPath)')">
      <IsKeyOutput>true</IsKeyOutput>
      <FinalOutputPath>$(TargetPath)</FinalOutputPath>
      <TargetPath>$(TargetFileName)</TargetPath>
    </BuiltProjectOutputGroupKeyOutput>
  </ItemGroup>

<PropertyGroup>
    <BuiltProjectOutputGroupDependsOn>PrepareForBuild</BuiltProjectOutputGroupDependsOn>
    <AddAppConfigToBuildOutputs Condition="('$(AddAppConfigToBuildOutputs)'=='') and ('$(OutputType)'!='library' and '$(OutputType)'!='winmdobj')">true</AddAppConfigToBuildOutputs>
  </PropertyGroup>
  <Target
      Name="BuiltProjectOutputGroup"
      Returns="@(BuiltProjectOutputGroupOutput)"
      DependsOnTargets="$(BuiltProjectOutputGroupDependsOn)">

<ItemGroup>
      <_BuiltProjectOutputGroupOutputIntermediate Include="$(AppConfig)"  Condition="'$(AddAppConfigToBuildOutputs)'=='true'">
        <FinalOutputPath>$(TargetDir)$(TargetFileName).config</FinalOutputPath>
        <TargetPath>$(TargetFileName).config</TargetPath>
        
        <OriginalItemSpec>$(AppConfig)</OriginalItemSpec>
      </_BuiltProjectOutputGroupOutputIntermediate>
    </ItemGroup>

<ItemGroup>
      <_BuiltProjectOutputGroupOutputIntermediate Include="$(OutDir)$(_DeploymentTargetApplicationManifestFileName)" Condition="'@(NativeReference)'!='' or '@(_IsolatedComReference)'!=''">
        <TargetPath>$(_DeploymentTargetApplicationManifestFileName)</TargetPath>
        
        <OriginalItemSpec>$(OutDir)$(_DeploymentTargetApplicationManifestFileName)</OriginalItemSpec>
      </_BuiltProjectOutputGroupOutputIntermediate>
    </ItemGroup>

<ItemGroup>
      <BuiltProjectOutputGroupOutput Include="@(_BuiltProjectOutputGroupOutputIntermediate->'%(FullPath)')">
        
        <OriginalItemSpec Condition="'%(_BuiltProjectOutputGroupOutputIntermediate.OriginalItemSpec)' == ''">%(_BuiltProjectOutputGroupOutputIntermediate.FullPath)</OriginalItemSpec>
      </BuiltProjectOutputGroupOutput>
    </ItemGroup>

</Target>

<!--
    ============================================================
                                        DebugSymbolsProjectOutputGroup

This target performs population of the Debug Symbols project output group.
    ============================================================
    -->
  <PropertyGroup>
    <DebugSymbolsProjectOutputGroupDependsOn></DebugSymbolsProjectOutputGroupDependsOn>
  </PropertyGroup>
  <ItemGroup Condition="'$(_DebugSymbolsProduced)' != 'false' and '$(OutputType)' != 'winmdobj'">
    <DebugSymbolsProjectOutputGroupOutput Include="@(_DebugSymbolsIntermediatePath->'%(FullPath)')">
      <FinalOutputPath>@(_DebugSymbolsOutputPath->'%(FullPath)')</FinalOutputPath>
      <TargetPath>@(_DebugSymbolsIntermediatePath->'%(Filename)%(Extension)')</TargetPath>
    </DebugSymbolsProjectOutputGroupOutput>
  </ItemGroup>
  <ItemGroup Condition="'$(_DebugSymbolsProduced)' != 'false' and '$(OutputType)' == 'winmdobj'">
    <WinMDExpOutputPdbItem Include="$(WinMDExpOutputPdb)" Condition="'$(WinMDExpOutputPdb)' != ''" />
    <WinMDExpFinalOutputPdbItem Include="$(_WinMDDebugSymbolsOutputPath)" Condition="'$(_WinMDDebugSymbolsOutputPath)' != ''" />
    <DebugSymbolsProjectOutputGroupOutput Include="@(WinMDExpOutputPdbItem->'%(FullPath)')">
      <FinalOutputPath>@(WinMDExpFinalOutputPdbItem->'%(FullPath)')</FinalOutputPath>
      <TargetPath>@(WinMDExpOutputPdbItem->'%(Filename)%(Extension)')</TargetPath>
    </DebugSymbolsProjectOutputGroupOutput>
  </ItemGroup>
  <Target
      Name="DebugSymbolsProjectOutputGroup"
      Returns="@(DebugSymbolsProjectOutputGroupOutput)"
      DependsOnTargets="$(DebugSymbolsProjectOutputGroupDependsOn)"/>

<!--
    ============================================================
                                        DocumentationProjectOutputGroup

This target performs population of the Documentation project output group.
    ============================================================
    -->
  <PropertyGroup>
    <DocumentationProjectOutputGroupDependsOn></DocumentationProjectOutputGroupDependsOn>
  </PropertyGroup>
  <ItemGroup Condition="'$(DocumentationFile)'!='' and '$(OutputType)' != 'winmdobj'">
    <DocumentationProjectOutputGroupOutput Include="@(DocFileItem->'%(FullPath)')">
      <FinalOutputPath>@(FinalDocFile->'%(FullPath)')</FinalOutputPath>
      <IsKeyOutput>true</IsKeyOutput>
      <TargetPath>@(DocFileItem->'%(Filename)%(Extension)')</TargetPath>
    </DocumentationProjectOutputGroupOutput>
  </ItemGroup>
  <ItemGroup Condition="'$(DocumentationFile)' != '' and '$(OutputType)' == 'winmdobj'">
    <WinMDOutputDocumentationFileItem Include="$(WinMDOutputDocumentationFile)" Condition="'$(WinMDOutputDocumentationFile)' != ''" />
    <WinMDExpFinalOutputDocItem Include="$(_WinMDDocFileOutputPath)" Condition="'$(_WinMDDocFileOutputPath)' != ''" />
    <DocumentationProjectOutputGroupOutput Include="@(WinMDOutputDocumentationFileItem->'%(FullPath)')">
      <FinalOutputPath>@(WinMDExpFinalOutputDocItem->'%(FullPath)')</FinalOutputPath>
      <TargetPath>@(WinMDOutputDocumentationFileItem->'%(Filename)%(Extension)')</TargetPath>
    </DocumentationProjectOutputGroupOutput>
  </ItemGroup>
  <Target
      Name="DocumentationProjectOutputGroup"
      Returns="@(DocumentationProjectOutputGroupOutput)"
      DependsOnTargets="$(DocumentationProjectOutputGroupDependsOn)"/>

<!--
    ============================================================
                                        SatelliteDllsProjectOutputGroup

This target performs population of the Satellite Files project output group.
    ============================================================
    -->
  <PropertyGroup>
    <SatelliteDllsProjectOutputGroupDependsOn>PrepareForBuild;PrepareResourceNames</SatelliteDllsProjectOutputGroupDependsOn>
  </PropertyGroup>
  <Target
      Name="SatelliteDllsProjectOutputGroup"
      Returns="@(SatelliteDllsProjectOutputGroupOutput)"
      DependsOnTargets="$(SatelliteDllsProjectOutputGroupDependsOn)">

<ItemGroup>
      <SatelliteDllsProjectOutputGroupOutputIntermediate Include="$(IntermediateOutputPath)%(EmbeddedResource.Culture)\$(TargetName).resources.dll"
                                                         Condition="'%(EmbeddedResource.WithCulture)' == 'true'">
        <TargetPath>%(EmbeddedResource.Culture)\$(TargetName).resources.dll</TargetPath>
        <Culture>%(EmbeddedResource.Culture)</Culture>
      </SatelliteDllsProjectOutputGroupOutputIntermediate>
    </ItemGroup>

<ItemGroup>
      <SatelliteDllsProjectOutputGroupOutput Include="@(SatelliteDllsProjectOutputGroupOutputIntermediate->'%(FullPath)')">
        <FinalOutputPath Condition=" '%(SatelliteDllsProjectOutputGroupOutputIntermediate.FinalOutputPath)' == '' ">$(TargetDir)%(SatelliteDllsProjectOutputGroupOutputIntermediate.TargetPath)</FinalOutputPath>
        
        <OriginalItemSpec>%(SatelliteDllsProjectOutputGroupOutputIntermediate.Identity)</OriginalItemSpec>
      </SatelliteDllsProjectOutputGroupOutput>
    </ItemGroup>

</Target>

<!--
    ============================================================
                                        SourceFilesProjectOutputGroup

This target performs population of the Source Files project output group.
    Source files are items in the project whose type is "Compile" and "EmbeddedResource".
    ============================================================
    -->
  <PropertyGroup>
    <SourceFilesProjectOutputGroupDependsOn>PrepareForBuild;AssignTargetPaths</SourceFilesProjectOutputGroupDependsOn>
  </PropertyGroup>
  <Target
      Name="SourceFilesProjectOutputGroup"
      Returns="@(SourceFilesProjectOutputGroupOutput)"
      DependsOnTargets="$(SourceFilesProjectOutputGroupDependsOn)">

<ItemGroup>
      
      <SourceFilesProjectOutputGroupOutput Include="@(_CompileWithTargetPath->'%(FullPath)');@(EmbeddedResource->'%(FullPath)');@(_LicxFile->'%(FullPath)');@(AppConfigWithTargetPath->'%(FullPath)')"/>

<SourceFilesProjectOutputGroupOutput Include="$(MSBuildProjectFullPath)">
        
        <OriginalItemSpec>$(MSBuildProjectFullPath)</OriginalItemSpec>
        <TargetPath>$(ProjectFileName)</TargetPath>
      </SourceFilesProjectOutputGroupOutput>
    </ItemGroup>

</Target>

<Target Name="GetCompile" Returns="@(Compile)"/>

<!--
    ============================================================
                                        ContentFilesProjectOutputGroup

This target performs population of the Content Files project output group.
    Content files are items in the project whose type is "Content".
    ============================================================
    -->
  <PropertyGroup>
    <ContentFilesProjectOutputGroupDependsOn>PrepareForBuild;AssignTargetPaths</ContentFilesProjectOutputGroupDependsOn>
  </PropertyGroup>
  <Target
      Name="ContentFilesProjectOutputGroup"
      Returns="@(ContentFilesProjectOutputGroupOutput)"
      DependsOnTargets="$(ContentFilesProjectOutputGroupDependsOn)">

<ItemGroup>
      <ContentFilesProjectOutputGroupOutput Include="@(ContentWithTargetPath->'%(FullPath)')"/>
    </ItemGroup>

</Target>

<!--
    ============================================================
                                        SGenFilesOutputGroup

This target performs population of the GenerateSerializationAssemblies Files project output group.
    GenerateSerializationAssemblies files are those generated by the GenerateSerializationAssemblies target and task.
    ============================================================
    -->
  <PropertyGroup>
    <SGenFilesOutputGroupDependsOn></SGenFilesOutputGroupDependsOn>
  </PropertyGroup>
  <ItemGroup
      Condition="'$(_SGenGenerateSerializationAssembliesConfig)' == 'On' or ('@(WebReferenceUrl)'!='' and '$(_SGenGenerateSerializationAssembliesConfig)' == 'Auto')">
    <SGenFilesOutputGroupOutput Include="@(_OutputPathItem->'%(FullPath)$(_SGenDllName)')">
      <FinalOutputPath>@(_OutputPathItem->'%(FullPath)$(_SGenDllName)')</FinalOutputPath>
      <TargetPath>$(_SGenDllName)</TargetPath>
    </SGenFilesOutputGroupOutput>
  </ItemGroup>
  <Target
      Name="SGenFilesOutputGroup"
      Returns="@(SGenFilesOutputGroupOutput)"
      DependsOnTargets="$(SGenFilesOutputGroupDependsOn)"/>

<!--
    ============================================================
                                        SDKRelated Output groups

These targets are to gather information from the SDKs.
    ============================================================
   -->
  
  <Target Name="GetResolvedSDKReferences" DependsOnTargets="ResolveSDKReferences" Returns="@(ResolvedSDKReference)"/>

<Target Name="CollectReferencedNuGetPackages" Returns="@(ReferencedNuGetPackages)"/>

<!--
    ============================================================
                                        PriFilesOutputGroup

This target performs population of the pri files output group
    ============================================================
    -->
  <Target
      Name="PriFilesOutputGroup"
      Condition="'@(_ReferenceRelatedPaths)' != ''"
      DependsOnTargets="BuildOnlySettings;PrepareForBuild;AssignTargetPaths;ResolveReferences"
      Returns="@(PriFilesOutputGroupOutput)">

<ItemGroup>
      <PriFilesOutputGroupOutput Include="@(_ReferenceRelatedPaths->'%(FullPath)')" Condition="'%(Extension)' == '.pri'"/>
    </ItemGroup>

</Target>

<PropertyGroup>
    <SDKRedistOutputGroupDependsOn>ResolveSDKReferences;ExpandSDKReferences</SDKRedistOutputGroupDependsOn>
  </PropertyGroup>

<!--
    ============================================================
                                        SDKRedistOutputGroup

This target gathers the Redist folders from the SDKs which have been resolved.
    ============================================================
  -->
  <Target
      Name="SDKRedistOutputGroup"
      Returns="@(SDKRedistOutputGroupOutput)"
      DependsOnTargets="$(SDKRedistOutputGroupDependsOn)">

<ItemGroup>
      <SDKRedistOutputGroupOutput Include="@(ResolvedRedistFiles)"/>
    </ItemGroup>
  </Target>

<!--
    ============================================================
                                        CommonOutputGroupsDependsOn

Dependencies common to many of the *OutputGroupDependencies targets.
    ============================================================
    -->
  <PropertyGroup>
    <CommonOutputGroupsDependsOn>
      $(CommonOutputGroupsDependsOn);
      BuildOnlySettings;
      PrepareForBuild;
      AssignTargetPaths;
      ResolveReferences
    </CommonOutputGroupsDependsOn>
  </PropertyGroup>

<Target
      Name="AllProjectOutputGroupsDependencies"
      DependsOnTargets="
            BuiltProjectOutputGroupDependencies;
            DebugSymbolsProjectOutputGroupDependencies;
            SatelliteDllsProjectOutputGroupDependencies;
            DocumentationProjectOutputGroupDependencies;
            SGenFilesOutputGroupDependencies"/>

<!--
    ============================================================
                                        BuiltProjectOutputGroupDependencies

This target performs population of the Built project output group dependencies.
    ============================================================
    -->
  <PropertyGroup>
    <BuiltProjectOutputGroupDependenciesDependsOn>
      $(BuiltProjectOutputGroupDependenciesDependsOn);
      $(CommonOutputGroupsDependsOn)
    </BuiltProjectOutputGroupDependenciesDependsOn>
  </PropertyGroup>

<ItemGroup>
      <BuiltProjectOutputGroupDependency  Include="@(ReferencePath->'%(FullPath)');
                                                         @(ReferenceDependencyPaths->'%(FullPath)');
                                                         @(NativeReferenceFile->'%(FullPath)');
                                                         @(_DeploymentLooseManifestFile->'%(FullPath)');
                                                         @(ResolvedIsolatedComModules->'%(FullPath)')"/>
    </ItemGroup>

</Target>

<!--
    ============================================================
                                        DebugSymbolsProjectOutputGroupDependencies

This target performs population of the dependencies for the debug symbols project output group.
    ============================================================
    -->
  <PropertyGroup>
    <DebugSymbolsProjectOutputGroupDependenciesDependsOn>
      $(DebugSymbolsProjectOutputGroupDependenciesDependsOn);
      $(CommonOutputGroupsDependsOn)
    </DebugSymbolsProjectOutputGroupDependenciesDependsOn>
  </PropertyGroup>

<ItemGroup>
      <DebugSymbolsProjectOutputGroupDependency Include="@(_ReferenceRelatedPaths->'%(FullPath)')" Condition="'%(Extension)' == '$(_DebugFileExt)'"/>
    </ItemGroup>

</Target>

<!--
    ============================================================
                                        SatelliteDllsProjectOutputGroupDependencies

This target performs population of the dependencies for the satellite files project output group.
    ============================================================
    -->
  <PropertyGroup>
    <SatelliteDllsProjectOutputGroupDependenciesDependsOn>
      $(SatelliteDllsProjectOutputGroupDependenciesDependsOn);
      $(CommonOutputGroupsDependsOn)
    </SatelliteDllsProjectOutputGroupDependenciesDependsOn>
  </PropertyGroup>

<ItemGroup>
      <SatelliteDllsProjectOutputGroupDependency Include="@(ReferenceSatellitePaths->'%(FullPath)')"/>
    </ItemGroup>

</Target>

<!--
    ============================================================
                                        DocumentationProjectOutputGroupDependencies

This target performs population of the dependencies for the documentation project output group.
    ============================================================
    -->
  <PropertyGroup>
    <DocumentationProjectOutputGroupDependenciesDependsOn>
      $(DocumentationProjectOutputGroupDependenciesDependsOn);
      $(CommonOutputGroupsDependsOn)
    </DocumentationProjectOutputGroupDependenciesDependsOn>
  </PropertyGroup>

<ItemGroup>
      <DocumentationProjectOutputGroupDependency Include="@(_ReferenceRelatedPaths->'%(FullPath)')" Condition="'%(Extension)' == '.xml'"/>
    </ItemGroup>

</Target>

<!--
    ============================================================
                                        SGenFilesOutputGroupDependencies

This target performs population of the dependencies for the GenerateSerializationAssemblies project output group.
    ============================================================
    -->
  <PropertyGroup>
    <SGenFilesOutputGroupDependenciesDependsOn>
      $(SGenFilesOutputGroupDependenciesDependsOn);
      $(CommonOutputGroupsDependsOn)
    </SGenFilesOutputGroupDependenciesDependsOn>
  </PropertyGroup>

<ItemGroup>
      <SGenFilesOutputGroupDependency Include="@(_ReferenceSerializationAssemblyPaths->'%(FullPath)')" Condition="'%(Extension)' == '.dll'"/>
    </ItemGroup>

</Target>

<!--
    ============================================================
                                        ReferenceCopyLocalPathsOutputGroup

Exposes the set of items that should be copied locally based on the project's references.
    ============================================================
    -->
  <PropertyGroup>
    <ReferenceCopyLocalPathsOutputGroupDependsOn>
      $(ReferenceCopyLocalPathsOutputGroupDependsOn);
      $(CommonOutputGroupsDependsOn)
    </ReferenceCopyLocalPathsOutputGroupDependsOn>
  </PropertyGroup>

<ItemGroup>
      <ReferenceCopyLocalPathsOutputGroupOutput Include="@(ReferenceCopyLocalPaths)">
        <TargetPath>%(ReferenceCopyLocalPaths.DestinationSubDirectory)%(ReferenceCopyLocalPaths.Filename)%(ReferenceCopyLocalPaths.Extension)</TargetPath>
      </ReferenceCopyLocalPathsOutputGroupOutput>
    </ItemGroup>

</Target>

<!--
    ============================================================
         DesignerRuntimeImplementationProjectOutputGroup

Exposes build items to be used by designer. The default is empty, but
    SDKs can override it as appropriate. The empty stub is required so that
    the project system can always rely on calling it even if it is not
    overridden.
    ============================================================
    -->
  <PropertyGroup>
    <DesignerRuntimeImplementationProjectOutputGroupDependsOn>
      $(DesignerRuntimeImplementationProjectOutputGroupDependsOn);
      $(CommonOutputGroupsDependsOn)
    </DesignerRuntimeImplementationProjectOutputGroupDependsOn>
  </PropertyGroup>

<Target Name="GetPotentialEditorConfigFiles" Returns="@(PotentialEditorConfigFiles)" />

<PropertyGroup>
    <CodeAnalysisTargets Condition="'$(CodeAnalysisTargets)'==''">$(MSBuildExtensionsPath32)\Microsoft\VisualStudio\v$(VisualStudioVersion)\CodeAnalysis\Microsoft.CodeAnalysis.targets</CodeAnalysisTargets>
  </PropertyGroup>

<Import Project="$(MSBuildToolsPath)\Microsoft.WorkflowBuildExtensions.targets"
          Condition="('$(TargetFrameworkVersion)' != 'v2.0' and '$(TargetFrameworkVersion)' != 'v3.5' and (!$([System.String]::IsNullOrEmpty('$(TargetFrameworkVersion)')) and !$(TargetFrameworkVersion.StartsWith('v4.0')))) and Exists('$(MSBuildToolsPath)\Microsoft.WorkflowBuildExtensions.targets')"/>

<Import Project="$(MSBuildToolsPath)\Microsoft.WinFX.targets" Condition="'$(TargetFrameworkIdentifier)' == 'Silverlight' and Exists('$(MSBuildToolsPath)\Microsoft.WinFX.targets')"/>

<PropertyGroup>
    <MsTestToolsTargets Condition="'$(MsTestToolsTargets)'==''">$(MSBuildExtensionsPath32)\Microsoft\VisualStudio\v$(VisualStudioVersion)\TeamTest\Microsoft.TeamTest.targets</MsTestToolsTargets>
  </PropertyGroup>

<Target Name="CleanAppxPackage" />
  <Target Name="GetPackagingOutputs" />

<PropertyGroup>
    <MsAppxPackageTargets Condition="'$(MsAppxPackageTargets)'==''">$(MSBuildExtensionsPath32)\Microsoft\VisualStudio\v$(VisualStudioVersion)\AppxPackage\Microsoft.AppXPackage.Targets</MsAppxPackageTargets>
  </PropertyGroup>

<PropertyGroup>
    <CommonMonoTargetsPath Condition="'$(CommonMonoTargetsPath)' == ''">Microsoft.Common.Mono.targets</CommonMonoTargetsPath>
  </PropertyGroup>

<Import Project="$(MSBuildToolsPath)\Microsoft.Data.Entity.targets" Condition="'$(TargetFrameworkIdentifier)' == 'Silverlight' and Exists('$(MSBuildToolsPath)\Microsoft.Data.Entity.targets')"/>

<PropertyGroup>
    <NuGetRestoreTargets Condition="'$(NuGetRestoreTargets)'=='' and '$([MSBuild]::IsRunningFromVisualStudio())'=='true'">$(MSBuildToolsPath32)\..\..\..\Common7\IDE\CommonExtensions\Microsoft\NuGet\NuGet.targets</NuGetRestoreTargets>
    <NuGetRestoreTargets Condition="'$(NuGetRestoreTargets)'==''">$(MSBuildToolsPath)\NuGet.targets</NuGetRestoreTargets>
  </PropertyGroup>

</Project>