EVOLUTION-MANAGER

Edit File: K05jexec

#!/bin/sh
#
# Copyright (c) 2006, 2010, Oracle and/or its affiliates. All rights reserved.
# ORACLE PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
#
#
# A script for supporting the direct execution of binary formats through
# binfmt_misc.
#
# More information about binfmt_misc is available at the binfmt_misc homepage:
#
#     http://www.tat.physik.uni-tuebingen.de/~rguenth/linux/binfmt_misc.html
#
#
### BEGIN INIT INFO
# Provides: binfmt_misc
# Required-Start: $local_fs
# Required-Stop:
# Default-Start: 1 2 3 4 5
# Default-Stop: 0 6
# chkconfig: 12345 95 05
# Description: Supports the direct execution of binary formats.
### END INIT INFO
#

BINFMT_MISC=/proc/sys/fs/binfmt_misc
PKMAGIC="PK\x03\x04"
PKMAGICHEX="504b0304"
NAME=jexec
TYPE=M
OFFSET=
MAGIC=${PKMAGIC}
MASK=
INTERP=/usr/java/latest/lib/jexec

ENABLED=enabled
DISABLED=disabled

#
# LSB compliant error values
SUCCESS=0
UNSPECIFIED=1
INVALID_ARGUMENT=2
ARG_NOT_SUPPORTED=3
INSUFFICIENT_PRIVILEGE=4
NO_BINFMT_MISC_SUPPORT=5
FAILED_TO_ENABLE=7
SERVICE_ENABLED=${SUCCESS}
SERVICE_DISABLED=151
SERVICE_NOT_MOUNTED=152
REGISTERED_ENABLED=153
REGISTERED_DISABLED=154
NOT_REGISTERED=155
MAGIC_IN_USE=156

#
# LSB compliant status values
STATUS_RUNNING=0
STATUS_NOT_RUNNING=3

#
# Checks that the binfmt_misc service is mounted and enabled.
#
# Output:
#    This function writes the return value to stdout.
#
# Returns:
#     0   : the service is mounted and enabled.
#     151 : the service is mounted but disabled.
#     152 : the binfmt_misc service is not mounted.
#
check_binfmt_misc() {
    result=${SERVICE_NOT_MOUNTED}

if [ -e ${BINFMT_MISC}/register ] && [ -e ${BINFMT_MISC}/status ]; then
        if [ "`cat ${BINFMT_MISC}/status`" = "enabled" ]; then
            result=${SERVICE_ENABLED}
        else
            result=${SERVICE_DISABLED}
        fi
    fi

echo ${result}
}

#
# Mounts the service for use.  If binfmt_misc is not already mounted, this
# function will attempt to mount it, creating the /proc subdirs if necessary.
#
# Output:
#    This function writes the return value to stdout.
#
# Returns:
#     0   : Success.
#     4   : insufficient privileges to create the mount point.
#     5   : the binfmt_misc service is not supported.
#
mount_service() {
    result=${NO_BINFMT_MISC_SUPPORT}

if [ ! -e ${BINFMT_MISC}/register ] || [ ! -e ${BINFMT_MISC}/status ]; then
        mkdir -p ${BINFMT_MISC} 2> /dev/null
        if [ -d ${BINFMT_MISC} ]; then
            mount -t binfmt_misc none ${BINFMT_MISC} 2> /dev/null
        else
            result=${INSUFFICIENT_PRIVILEGE}
        fi
    fi

if [ -e ${BINFMT_MISC}/register ] && [ -e ${BINFMT_MISC}/status ]; then
        result=${SUCCESS}
    fi

echo ${result}
}

#
# Registers the jexec interpreter with the PK-ZIP binary type.  This function
# first checks to see if any other interpreter is registered and enabled for
# the PK-ZIP binary type.  If nothing else is currently enabled for the PK-ZIP
# binary type then the jexec entry is created.  If the jexec entry exists, but
# is disabled, then it is enabled.
#
# Output:
#    This function writes the return value to stdout.
#
# Returns:
#     0   : Success.
#     4   : insufficient privileges to enable the jexec interpreter.
#     156 : another interpreter is registered for the PK-ZIP binary type.
#
# Note: once the PK-ZIP magic number is detected, the jexec interpreter handles
#       all additional processing required to determine if the file is a JAR or
#       just a simple ZIP file.
#
register_jexec() {
    result=${SUCCESS}

# first make sure that nothing else has registered the PK-ZIP magic
    for file in ${BINFMT_MISC}/*; do
        filename="`basename ${file}`"
        if [ "${filename}" != "register" ] &&
           [ "${filename}" != "status" ]
        then
            is_registered=`check_registration ${file}`
            if [ ${is_registered} -eq ${REGISTERED_ENABLED} ] &&
               [ "${filename}" != "${NAME}" ]
            then
                result=${MAGIC_IN_USE}
            elif [ ${is_registered} -eq ${REGISTERED_DISABLED} ] &&
                 [ "${filename}" = "${NAME}" ]
            then
                # the registration exists, but is disabled, so re-enable it
                enable_jexec 2> /dev/null
                if [ $? -ne 0 ]; then
                    result=${INSUFFICIENT_PRIVILEGE}
                fi
            fi
        fi
    done

if [ ${result} -eq ${SUCCESS} ] &&
       [ ! -e ${BINFMT_MISC}/${NAME} ]
    then
        # Register jexec with the PK-ZIP magic number.  jexec does additional
        # decoding of the ZIP/JAR file header to determine if it is actually
        # a JAR file, or just a regular ZIP file.
        echo ":${NAME}:${TYPE}:${OFFSET}:${MAGIC}:${MASK}:${INTERP}:" > \
            ${BINFMT_MISC}/register
        if [ ! -e ${BINFMT_MISC}/${NAME} ]; then
            result=${INSUFFICIENT_PRIVILEGE}
        fi
    fi

echo ${result}
}

#
# Unregisters the jexec interpreter with the PK-ZIP binary type.
#
# This function is just a wrapper that allows any error messages to be sent to
# /dev/null.  Generally speaking this function shouldn't fail unless the user
# doesn't have sufficient permission to write to binfmt_misc.
#
unregister_jexec() {
    echo -1 > ${BINFMT_MISC}/${NAME}
    return $?
}

#
# Sets the overall binfmt_misc status.
#
# This function is just a wrapper that allows any error messages to be sent to
# /dev/null.  Generally speaking this function shouldn't fail unless the user
# doesn't have sufficient permission to write to binfmt_misc.
#
# Parameters:
#     $1 : overall status to set; either 1 = enable, 0 = disable, -1 = remove
#
set_service_status() {
    echo $1 > ${BINFMT_MISC}/status
    return $?
}

#
# Enable the jexec interpreter.
#
# This function is just a wrapper that allows any error messages to be sent to
# /dev/null.  Generally speaking this function shouldn't fail unless the user
# doesn't have sufficient permission to write to binfmt_misc.
#
enable_jexec() {
    echo 1 > ${BINFMT_MISC}/${NAME}
    return $?
}

#
# This function checks if a given registration contains the PK-ZIP magic number,
# and if it does, is it enabled.
#
# Parameters:
#     $1 : file - the full pathname to the registration to check
#
check_registration() {
    file="$1"
    result=${NOT_REGISTERED}

if [ -n "`grep \"magic ${PKMAGICHEX}\" ${file}`" ]; then
        result=${REGISTERED_DISABLED}
        if [ -n "`grep \"${ENABLED}\" ${file}`" ]; then
            result=${REGISTERED_ENABLED}
        fi
    fi

echo ${result}
}

#
# Starts the jexec service.  The service is started if all of the following
# conditions are met:
#
#     * the service is properly mounted
#     * the jexec binary interperter is registered and enabled
#     * the service is enabled
#
# Output:
#    This function writes the return value to stdout.
#
# Returns:
#     0   : Success.
#     4   : insufficient privileges.
#     5   : the binfmt_misc service is not supported.
#     151 : the service is mounted but disabled.
#     152 : the binfmt_misc service is not mounted.
#     156 : another interpreter is registered for the PK-ZIP binary type.
#
start() {
    # make sure binfmt_misc is mounted
    result=`mount_service`
    if [ ${result} -eq ${SUCCESS} ]; then
        # make sure jexec is registered and enabled
        result=`register_jexec`
        if [ ${result} -eq ${SUCCESS} ] &&
           [ "`cat ${BINFMT_MISC}/status`" != "${ENABLED}" ]
        then
            # enable binfmt_misc
            set_service_status 1 2> /dev/null
            if [ $? -ne 0 ]; then
                result=${INSUFFICIENT_PRIVILEGE}
            else
                result=`check_binfmt_misc`
            fi
        fi
    fi

echo ${result}
}

#
# Don't bother stopping anything other than the actual jexec interpreter.
#
# Output:
#    This function writes the return value to stdout.
#
# Returns:
#     0   : Success.
#     4   : insufficient privileges.
#
stop() {
    result=${SUCCESS}

if [ -e ${BINFMT_MISC}/${NAME} ]; then
        status=`check_registration ${BINFMT_MISC}/${NAME}`
        if [ ${status} -eq ${REGISTERED_ENABLED} ]; then
            unregister_jexec 2> /dev/null
            if [ $? -ne 0 ]; then
                result=${INSUFFICIENT_PRIVILEGE}
            fi
        fi
    fi

echo ${result}
}

#
# Get the current status of the service.
#
# Output:
#    This function writes the return value to stdout.
#
# Returns:
#     0   : The jexec interpreter is fully setup to handle JAR file execution.
#     3   : The jexec interpreter is not setup.
#
status() {
    status=`check_binfmt_misc`
    result=${STATUS_RUNNING}

if [ ${status} -eq ${SERVICE_ENABLED} ] &&
       [ -e ${BINFMT_MISC}/${NAME} ]
    then
        status=`check_registration ${BINFMT_MISC}/${NAME}`
        if [ ${status} -ne ${REGISTERED_ENABLED} ]; then
            result=${STATUS_NOT_RUNNING}
        fi
    else
        result=${STATUS_NOT_RUNNING}
    fi

echo ${result}
}

STATUS=0

case "$1" in
    start)
        echo -n "Starting jexec services"
        STATUS=`start`
        ;;

stop)
        echo -n "Stopping jexec services"
        STATUS=`stop`
        ;;

try-restart | condrestart | force-reload)
        $0 status
        STATUS=$?
        if [ ${STATUS} -eq 0 ]; then
            $0 restart
            STATUS=$?
        else
            # Not running is not a failure
            STATUS=${SUCCESS}
        fi
        ;;

restart)
        $0 stop
        $0 start
        STATUS=$?
        ;;

status)
        echo -n "Checking jexec status"
        STATUS=`status`
        ;;

reload)
        STATUS=${ARG_NOT_SUPPORTED}
        ;;

probe)
        STATUS=${ARG_NOT_SUPPORTED}
        ;;

*)
        echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload}"
        STATUS=${INVALID_ARGUMENT}
        ;;
esac

exit $STATUS