EVOLUTION-MANAGER

Edit File: RabbIT.conf

# This file is partioned in several sections. # A section starts with [<name of section>] # If two (or more) sections are found with the same name they are # merged into one. [rabbit.proxy.HttpProxy] # This section holds the basic stuff needed for the proxy. # This is the port the proxy listens on. # Use any port available (over 1024 unless you run as root). port=9666 # The number of selector threads to run # If not specified will use the same as the number of processors #num_selector_threads=4 # This is the proxy that RabbIT should use when getting its files. # Leave it blank to dont have a proxy. # Both of these need to be set, or they will be ignored. proxyhost= proxyport= # If you want RabbIT to authenticate itself against another proxy # fill this in. # This is a string on the format "myuserid:mypassword" proxyauth= # This is the small logo to use. # It is used in meta pages and other places. # Use $proxy to have RabbIT serve the image. logo=http://$proxy/FileSender/public/smallRabbIT4.png # What do you want your proxy to identify itself as? # Server identy can be seen in HTTP header responses # in the Server-value. #serverIdentity=..__-My own super proxy-__.. # Allow single \n to mean end of header # This is a MUST NOT according to spec, but seems to be a common error: # "Content-Type: text/html\n\n" for ending CGI etc.. #StrictHTTP=true StrictHTTP=false [logging] # RabbIT uses standard java.util.logging to log things, you # can either setup logging here, which will mean that a FileHandler # is used or you can set the system property # "java.util.logging.config.file" to configure your own loggers/handlers. # access_log=/var/log/RabbIT/access_log.%g access_size_limit=10 # in MB access_num_files=100 error_log=/var/log/RabbIT/error_log.%g error_size_limit=1 # in MB error_num_files=10 # This is how much RabbIT will log in the errorlog. # Since rabbit uses standard java.util.logging you can # chose one of SEVERE (highest value), WARNING, INFO, # CONFIG, FINE, FINER, and FINEST (lowest value) # FINEST means that you will get a lot of logs. access_log_level=INFO error_log_level=INFO [dns] # Select the dns handler to use. # DNSJavaHandler is fully threaded but may fail on some machines. # DNSSunHandler should work for more people, but is not threaded. dnsHandler=rabbit.dns.DNSJavaHandler #dnsHandler=rabbit.dns.DNSSunHandler [rabbit.dns.DNSJavaHandler] # How long should dns entries be cached. # Time is in hours. # Both positive and negative entries are cached this long. # Set it to -1 to cache forever. dnscachetime=8 [rabbit.io.ConnectionHandler] # This section sets up the connection handler. # The maximal time to keepalive toward external hosts. # Note! if we fail to write to a connection, we retry so # It should be safe to have a high value. # Time is in miliseconds. keepalivetime=30000 # Should RabbIT try to pipeline requests to external hosts. # Pipelining to external hosts will pipeline requests to the same # server even if the requests come from different clients. # This means that in some cases client B will have to wait for # client A to finish. RabbIT will not wait very long on a connection # so this should be ok. # Still use with caution, somewhat experimental, may cause bugs. usepipelining=false [Handlers] # This section sets up the content handlers. # Each mime type can have its own handler. # Ok, we want regexp matching on these in the future. # Use only lower case for these for now # Handle images by conversion to low quality jpegs. image/gif=rabbit.handler.ImageHandler*gif image/jpeg=rabbit.handler.ImageHandler*jpeg image/pjpeg=rabbit.handler.ImageHandler*jpeg image/png=rabbit.handler.ImageHandler*png # Filter these streams. # The configuration of FilterHandler is later in this file. text/html=rabbit.handler.FilterHandler text/html;charset\=iso-?8859-1=rabbit.handler.FilterHandler text/html;charset\=iso-?8859_1=rabbit.handler.FilterHandler text/html;charset\=utf-?8=rabbit.handler.FilterHandler text/html;charset\=utf_?8=rabbit.handler.FilterHandler # Use this if you only want compression #text/html=rabbit.handler.GZipHandler #text/html;charset\=iso-?8859-1=rabbit.handler.GZipHandler #text/html;charset\=iso-?8859_1=rabbit.handler.GZipHandler # Seems Netscape and IE have problems with this one although # they both say it is ok, disabled for now.... #application/x-javascript=rabbit.handler.GZipHandler #text/javascript=rabbit.handler.GZipHandler # Compress these streams. text/plain=rabbit.handler.GZipHandler text/plain;charset\=iso-?8859-1=rabbit.handler.GZipHandler text/plain;charset\=utf-?8=rabbit.handler.GZipHandler # you may want to compress theese, more testing needed. text/xml=rabbit.handler.GZipHandler text/xml;charset\=iso-?8859-1=rabbit.handler.GZipHandler text/xml;charset\=utf-?8=rabbit.handler.GZipHandler application/xml=rabbit.handler.GZipHandler application/xml;charset\=utf-?8=rabbit.handler.GZipHandler application/postscript=rabbit.handler.GZipHandler application/postscript;charset\=utf-?8=rabbit.handler.GZipHandler text/css=rabbit.handler.GZipHandler text/css;charset\=utf-?8=rabbit.handler.GZipHandler [CacheHandlers] # This section sets up the content handlers for the resourses in the # cache. Each mime type can have its own handler. For more info see # the Handlers section. # Note! dont use ImageHandler, FilterHandler or GZipHandler in # both Handlers and CacheHandlers section since they write the # modified page to the cache. # Handle images by conversion to low quality jpegs. #image/gif=rabbit.handler.ImageHandler #image/jpeg=rabbit.handler.ImageHandler #image/png=rabbit.handler.ImageHandler # Filter these streams. #text/html=rabbit.handler.FilterHandler #text/html;charset\=iso-?8859-1=rabbit.handler.FilterHandler # Seems Netscape and IE have problems with this one although # they both say it is ok, disabled for now.... #application/x-javascript=rabbit.handler.FilterHandler # Compress these streams. #text/plain=rabbit.handler.GZipHandler [rabbit.cache.NCache] # This section sets up the cache. # The base directory for the cache. directory=/tmp/rcache # The time in hours to cache files, unless specified otherwise (in the # http header that is). cachetime=24 # The maximal size of the proxy in MB. # The cache sweeps at regular intervalls and if the cache is bigger # some stuff is cleaned out. maxsize=10000 # The time the cleaner sleeps between cleanups. # time is in seconds. cleanloop=60 [Filters] # This section sets up the filters to use. # A filter is one that may block/close the connection or just modifies # the request. # Accessfilters are based on the socket only. # All filters here must implement the IPAccessFilter interface. accessfilters=rabbit.filter.AccessFilter # Here we filter the HTTP header, these filters should have an # public static HTTPHeader doHTTPInFiltering (Socket, HTTPHeader, # Connection) # method that may modify the incomming request. If a HTTPHeader is # returned it is sent to the client and the request is finished. (this # is an easy way to block some ads and other bad stuff). # The list is comma separated and full class names has to be used. # # Available filters today are: # HttpBaseFilter this is basically needed, use it. # DontFilterFilter stop the proxy from filtering certain pages. # DontCacheFilter stop the proxy from cacheing certain pages. # BlockFilter Dont allow access to certain pages. # HttpSnoop Print the Http headers out on System.out. # ProxyAuth Perform proxy authentication on all users, backend db is a file # SQLProxyAuth Perform proxy authentication on all users, backend is an sql db. # ReverseProxy Transform requests to "/some/page" into "http://some.host/some/page" # If you use the reverse proxy option, you probably # want it first in the list # NoGZipEncoding A filter that removes "Accept-Encoding: gzip". Not very useful anymore # since rabbit can repack gzip:ed and deflated files. # RevalidateFilter A filter that makes sure that resources are always revalidated # SetHeaderFilter A filter that can add request or response headers. # # by default we use a few filters, httpinfilters=rabbit.filter.HttpBaseFilter,rabbit.filter.DontFilterFilter,rabbit.filter.BlockFilter,rabbit.filter.RevalidateFilter # just the basic filter #httpinfilters=rabbit.filter.HttpBaseFilter # an example if you want to log traffic that rabbit reads #httpinfilters=rabbit.filter.HttpSnoop,rabbit.filter.HttpBaseFilter,rabbit.filter.DontFilterFilter # This works as the httpinfilters except that the method is called # doHTTPOutFiltering instead # The available filters are the same as for httpinfilters but they # need not be. httpoutfilters=rabbit.filter.HttpBaseFilter # to see what rabbit writes to the client #httpoutfilters=rabbit.filter.HttpBaseFilter,rabbit.filter.HttpSnoop # to see what rabbit gets from the real server #httpoutfilters=rabbit.filter.HttpSnoop,rabbit.filter.HttpBaseFilter [sslhandler] # Are we allowed to proxy SSL? # We dont check the data so this is not recomended. # yes, no, portnumber are allowed options. allowSSL=443,444,8443 # allow to these ports. #allowSSL=yes # allow to all ports. #allowSSL=no # dont allow sslproxying. #allowSSL=no [rabbit.filter.AccessFilter] # This is a filter to allow simple accesscontrol. # this file store the available ip-ranges that can use the proxy. accessfile=/etc/RabbIT/access [rabbit.filter.HttpBaseFilter] # This is a basic filter (which _SHOULD_ be used). Basically RabbIT # is depending on this filter being used. # Remove these hop-headers. remove=Connection,Proxy-Connection,Keep-Alive,Public,Transfer-Encoding,Upgrade,Proxy-Authorization,TE,Proxy-Authenticate,Trailer # authenticate users (basic method only) with this user-password file. # this is used for meta/admin access... userfile=/etc/RabbIT/users # If you set cookieid to "true" rabbit will not cache resources # that seem to use cookie based identification. This should only # be used if the site in question is broken (that is it does not # send "Cache-Control: no-cache" or similar to disable caching. cookieid=false [rabbit.filter.DontFilterFilter] # This filter stops filtering certain pages that otherwise would be # handled in a strange way (due to strange HTML that we parse # (in)correctly). # this filter is not enabled by default, add it to # httpinfilters if you want it. # Match URL's, regexp, find is used. dontFilterURLmatching=(login\.passport\.com|\.jar|\.js(\?|$)|www\.ureach\.com|(maps|(khm|mt)\d).google.com|tile.openstreetmap.org) # Match agents, regepx, find is used. #dontFilterAgentsMatching=(Java|Evil browser|pocketOpera) dontFilterAgentsMatching=Java [rabbit.filter.DontCacheFilter] # This filter stops cacheing of certain pages. It could be good for never # cacheing chat sites that dont send correct cache-control directives. # this filter is not enabled by default, add it to # httpinfilters or httpoutfilters if you want it. # This filter can match on either URL or mime type. Remember that not # all sites supply correct mimes... # To match on URL append this class to the httpinfilters... # To match on mime type append this class to the httpoutfilters... # You may of course use both methods if wanted/needed. # All matching is done in lower case (of the URL/mime) so use that below. # Some examples: # Match URL regexp, find is used. # This example dont cache any html or asp pages (this is probably stupid to do). #dontCacheURLmatching=(\.html|\.asp) # This example dont cache a certain site and page.. #dontCacheURLmatching=(www\.chat\.com/index\.html) # This example only caches resources with .gif or .jpeg in it.. #onlyCacheURLmatching=(\.gif|\.jpeg) # dont cahce ordinary web pages. #dontCacheMimematching=text/html # dont cache text files (text/html, text/plain...) #dontCacheMimematching=text/ # Only cache gif images #onlyCacheMimematching=image/gif # Only cache images #onlyCacheMimematching=image [rabbit.filter.BlockFilter] # This is a filter that blocks access to resources. # return a 403 forbidden for these requests. blockURLmatching=(\.sex\.|[-.]ad([sx]?)\.|/ad\.|adserving\.|ad101com-|pagead/imgad|as-us.falkag.net|clicktorrent.info) [rabbit.filter.HttpSnoop] # Setting this to true will shorten the log a bit. #requestLineOnly=false [rabbit.filter.ProxyAuth] # This filter is not enabled by default, add it to # httpinfilters if you want it. # allowed user.. userfile=/etc/RabbIT/allowed [rabbit.filter.SQLProxyAuth] # this filter is not enabled by default, add it to # httpinfilters if you want it. # You also have to configure this to work. # the driver to use: # org.gjt.mm.mysql.Driver for mysql # org.hsqldb.jdbcDriver for hssql driver= # the url to use for the database, something like: # jdbc:oracle:thin:@//myhost:1521/orcl for an oracle db # jdbc:hsqldb:hsql://localhost for a hssql url= # the database user user= # the database password password= # the select to use, you have to have one '?' for the username select=select password from rabbit_users where username=? [rabbit.filter.ReverseProxy] # This filter is not enabled by default, add it to # httpinfilters if you want it. # This Filter makes rabbit work as an accellerator for one web site. # Change requests starting with / to http://www.khelekore.org/ transformMatch=^/(.*) transformTo=http://www.khelekore.org/$1 # Deny proxy requests, you probably want this. deny=^http(s?)://.* # If we want to allow admin access. allowMeta=true [rabbit.filter.NoGZipEncoding] # setting this to false is the same thing as removing the # filter (at least for now) remove=true [rabbit.filter.RevalidateFilter] # setting this to true will force rabbit to revalidate all resources alwaysrevalidate=false # a regexp matching sites to revalidate revalidate=freshmeat.net/$|slashdot.org/$|http://www/$|newsforge.com/$ [rabbit.filter.SetHeaderFilter] # set fix request or response headers #request.foo=bar #request.bar=baz #response.qwe=boh #response.uonkl=97714 [rabbit.handler.GZipHandler] # Should we compress data streams? # valid values are "false" and everything else is considered true compress=true #compress=false [rabbit.handler.ImageHandler*jpeg] # This handler converts images into low quality jpegs instead of high # quality gifs/pngs. # This is the program used to convert the images. # if this program is not found, this filter will do nothing... convert=/usr/bin/convert # $filename is expanded to the right name(the cachefile) during # runtime #convertargs=-quality 10 $filename[0] jpeg:$filename.c convertargs=-quality 10 -flatten $filename +profile "*" jpeg:$filename.c # Images that are smaller than this are not converted at all min_size=2000 [rabbit.handler.ImageHandler*gif] convert=/usr/bin/convert convertargs=-quality 10 -flatten $filename +profile "*" jpeg:$filename.c min_size=2000 [rabbit.handler.ImageHandler*png] convert=/usr/bin/convert convertargs=-quality 10 -flatten $filename +profile "*" jpeg:$filename.c min_size=2000 [rabbit.handler.FilterHandler] # This is the basic HTML page filter. It uses a few other HTMLFilters. # Note! if this filter is to compress the pages sent you need to set # compress value to true (which is default). # use these HTMLFilters. available filters are: # BodyFilter This filter inserts a noproxy link at the top of the page. # BackgroundFilter This filter removes background images. # AdFilter This filter removes advertising from pages. # BlinkFilter This filter removes the <blink> tags. # LowresImageFilter This filter removes the lowres-attributes from <img> tags. filters=rabbit.filter.BodyFilter,rabbit.filter.BackgroundFilter,rabbit.filter.AdFilter,rabbit.filter.BlinkFilter,rabbit.filter.LowresImageFilter # A filter that destroys content a bit less than the above # filters=rabbit.filter.AdFilter,rabbit.filter.BlinkFilter,rabbit.filter.LowresImageFilter # Should we compress data streams? # valid values are "false" and everything else is considered true compress=true # Should we unpack compressed content, filter it and possibly repack it? repack=false # Set the default charset, the rfc specifies ISO-8859-1, but you can change it, but it is probably a bad idea. #defaultCharSet=UTF-8 # Always force a given charset, probably a very bad idea. #overrideCharSet=UTF-8 [rabbit.filter.BodyFilter] # A Filter to insert a noproxy link at the start of each page. # This text before the link prefix=<center><font size=-2><a href="http://www.khelekore.org/rabbit/" target="_top">RabbIT</a> filtered this page. # And this text after. postfix=</font></center><br> # should we insert a link. unfilteredlink=true # visible name of the link link=unfiltered page [rabbit.filter.BackgroundFilter] # A Filter to remove background images. # This filter has no configuration options. [rabbit.filter.AdFilter] # A filter to remove advertising from pages. # The list of evils. A regexp. adlinks=[/.]((c|net|ns|surf|page|imag)?ad([svq]|fu|srv|[sz]erver|log|bannercenter|_?click|verts|finity|force|click|tech)?\d*|banner|linkexchange|acc_clickthru|action|vertising)[/.]|gen_addframe|event.ng|/m=|/ad(num|vert|name)?=|/site_id=|support.net|/redir\.|\?assoc= # The image to replace ads with. # Use $proxy to let the RabbIT serve the image. adreplacer=http://$proxy/FileSender/public/NoAd.gif [rabbit.filter.LowresImageFilter] # A filter that removes the lowres attributes from the img-tags. # This filter (currently) has no configuration options.